Setup Installation :: Windows 8 Dual Boot - Windows 7 Restarts Instead Of Direct Booting
Feb 8, 2013
When Windows 8 menu appears on start and I choose W7 - instead of loading W7directly , the computer is new-starting again and only than starts w7. That's a funny "behaviour"....
Also, after starting the computer, the menu is not directly shown up, first is this turning wi8 circle (like in the setup) and only about 30 sec. later comes the menu. I am using windows 8 enterprise, test version.
I have a big problem since 9/9 and I just can`t fix it.
I have a dual boot system and use Windows 8 as my main OS and on the other ssd I have ubuntu 12.10 installed.
My issue started because I completely forgot that I had ubuntu installed on the other ssd (didn`t use it anyway) and tried to raid the ssd...so now I can`t boot anything and I do need to restore my Windows 8.
I have a usb recovery disk which allows me to use cmd but I don`t know how to use to recover my Windows 8 so that`s why I am here.
I ran diskpart on cmd it it shows both disks and both are ONLINE.
Ran chkdsk /f but i keep getting an error and chkdsk does not run
I have asus P8Z77-V LX UEFI Mobo Intel rapid Smart technology (RST), Intel Smart Connect Technoly is disabled. CSM is ENABLED ( it was AUTO) and boot device control to UEFI and LEGACY OpROM.
Secure Boot is disabled and I changed the OS type to OTHER OS and also tried WINDOWS UEFI MODE. The setup mode is EZ MODE.
I wanted to ask a couple of things about installing Windows XP Home SP2 Upgrade (not full) on a partition (I'll get a cheap old Windows copy for the upgrade to work), with a pre-installed Windows 8 in the other partition.
1) How to do it, found how to install XP on Windows 7. Is it the same procedure?
2) I have heard that installing an XP Upgrade will wipe/reformat an entire HD, both partitions as if they were not partitioned/united. Is that true?
I am trying to dual boot Kali with Windows 8.1 and I keep getting three errors at the installation menu. I also carefully checked that I have followed the installation instructions correctly and I have. Here are the three errors:
1.) "Empty Security Header" 2.) "error:/live/vmlinuz has invalid signature" (I double checked other sources and the grub.cfg file I have saved was/is written correctly) 3.) "error: you need to load the kernel first"
attempting to setup a dual boot with Win 8.1 and Win XP.
Just a quick break down of my current setup:
a) Win 8.1 x64 is currently installed on my SSD on C: drive partition b) On a different SATA hdd I have an old Win 7 x64 installation that I'm not using any more on one partition
I simply want to replace my old Win 7 x64 installation with Win XP. Why do I want to install Win XP you may ask ? The answer is simple, I want to play some older games that aren't fully compatible with Win 8.1 x64 and neither run good in a virtual machine environment on Win 8.1.
The only thing that is stopping me from attempting this is, has to do with the Win 8.1 bootloader. I simply don't want to lose my bootloader, and I'm afraid that when I install Win XP it might overwrite my Win 8.1 bootloader which will most likely leave me without gaining access to Win 8.1. At the moment the Win 8.1 bootloader lists along with Win 8.1 my old Win 7 x64 installation.
Given my setup of hdd's up top, what would be the easiest way for me to load Win XP on my old Win 7 partition that will still allow me to have the Win 8.1 bootloader with a Win XP boot option on the bootloader menu ?
Should I disconnect my SSD and then proceed to install Win XP on the Win 7 partition and then afterward reconnect my SSD and then using EasyBCD add an entry for Win XP to the bootloader? Or will I run into an issue along the way?
i have purchased windows8 to upgrade windows 7, install helper confirmed virtually all was ok to do it , windows 8 would not install over windows7 so after talking to microsoft i made a partition and dual booted to see if windows 8 worked, it does. Now i would like to upgrade my existing 7 or migrate all the emails programmes etc to windows8. what is the way to do this do i just try and upgrade windows 7 with 8 or is there a better way.
I have a few questions about dual booting windows 7 and windows 8 preinstalled (UEFI) on my Dell laptop.
1. Can I install a non-UEFI version of Windows 7 on my laptop, if so how? 2. Will installing a non-UEFI version of Windows 7 on my laptop break it? 3. Can I use EasyBCD for UEFI? 4. How do I create a UEFI windows 7?
My girlfriend has recently got a new laptop and unfortunately she doesn't like it, despite me loving Windows 8.1.
She would like to try Windows 8 but is going back to Uni soon so would like Windows 7 as a back-up dual booted.
I've shrunk the partition and created a simple partition for Windows 7 but really unsure about Installing Windows 7 on a Windows 8 Laptop, it's an ASUS X550CA-XX417H. I've checked power shell with SecureBootUEFI and result is True.
Currently I have a machine with Windows 8 pre-installed already. But now I don't like Windows 8 as much because certain programs I want to use requires Windows 7. Though I would still like to keep Windows 8 because it's licensed. I have an extra hard drive lying around with Windows 7 loaded in it already. Now I would like to dual boot between these two drives. Do I have to turn off Secure Boot and change the boot orders around to boot the Windows 7 hard drive?
So I have a Toshiba laptop with win 8 preinstalled in it I want to dual boot it with win XP However I managed to boot to the CD after some research but when I reach to installing win xp to my virtual partition I can't seem to find it I just see my HDD as one without a partition... what can I do?
Dual boot... I installed a new SSD and want to install a clean copy of Windows 8 Pro 64 bit on it while retaining Windows 7 Home Premium 64 bit on my existing HHD. I have an upgrade copy of Windows 8. Will I be able to dual boot with this set-up?
I have both 7 and 8 installed in a dual boot system and have now decided that I no longer need Windows 7.
I have read and re-read the tutorial on removing Windows 7 so I am very familiar with the method however, it does not work for me. In disk manager I select the partition to be deleted and right click on it as instructed in the tutorial. In the drop down menu the option to "delete volume" is greyed out and not available so I am stuck.
I have a sony vaio vpcyb3v1e. I have windows 8.1 installed and i tried using a bootable usb to install as multi boot, the xp black edition on a separate partition. After doing that i couldn't be able to login in the windows 8.1 OS. I got the message Load needed DLLS for kernel.
I have a question on the best way to install Windows 7 as a dual boot on an existing Windows 8 installation on a new Asus Laptop. Most of the tutorials I've seen assume the pre-existing installation is Windows 7, and say that Windows 7 needs to be installed first, not an option when your Windows 8 comes pre-installed.
I have an Asus F75, and here is the partitioning: 1. 300 MB EFI System Partition, FAT32 2. 900 MB NTFS Recovery Partition (would seem to be the MS Reserved partition, is that correct?) 3. 279 GB NTFS OS Partition 4. 398 GB NTFS Data Partition 5. 20 GB NTFS Recovery Partition
It sounds like after installing Windows 7, the boot menu will be the Win7 text boot selection menu if you use that as the default OS, which is what I plan on doing, so I believe there isn't anything I need to do to that, is that correct?
I have turned of Fast Boot in Windows 8, and disabled Secure Boot in the system BIOS.
What should I do about the existing Data partition, which will be the Win7 partition. Should I:
a. Leave that intact and simply install Win7 to it, or b. Delete the partition, install Win7 and allow the install to manage the unallocated space?
Do I have any other considerations other than collecting all the Win 7 drivers for the laptop (which I have already done)?
Windows 8, linux, Partition....I would like to use my new laptop with windows 8 pre-installed to the following:-
Create a Dual Boot Windows 8 / Ubuntu- Create on my C drive (unique drive on my laptop):*a partition for the system*one for Windows 8*one for Data and *last one for Ubuntu OS
My aim is :-to install VmWare on Windows 8 and run Checkpoint Splat with virtual machines to perform CCSA labs.- to install GNS3 on Ubuntu for CCNP labs but with GNS3 accessing files in the Data partition.
I have a Toshiba Satellite with 750Gb and 8 Go RAM.According to you what's the best size for my partitions?Is there a better way to partition my C drive regarding my aim?
I have been researching installing Ubuntu alongside Win 8.on my daughters laptop. I already boot Ubuntu & Win 7 on my desktop pc, but I have read some horror stories about installing Ubuntu with Win 8., mostly in regard to the uefi boot system in Win 8., as well as, its a laptop as opposed to desktop.
I have been told that i must enter the bios first and disable secure boot. Most of the tutorials I have read are very complex. Then i read a tutorial from this website, dated 2011 that appeared to be simple, and similar to my own Ubuntu/Win 7 installation, however it was dated 2011.
Dual Boot Windows 8 And Ubuntu : Windows 8 Guides
The only difference with my intended installation is that I will use a dvd as my Pc does not have a USB Boot option.
Used to run Win 7 on our main drive, and used a second one for storage (mainly games), however something happened, making us unable to boot. So we decided to upgrade to Windows 8, which we put on our secondary drive, and that's now the main one (boots from here, is Disk 0). When I turn on the PC, it asks me whether to run on Windows 7 or 8 (8 is the default). C: contains Windows 8, D: Contains Win 7.
MAIN PROBLEM: Since we're going to use the old main drive as storage (the one with Windows 7), I wanted to format it, but it won't let me because, I suppose, of the System files still on it (System, Active). Picture of Disk Management below. How do I format it?
I really want to dual boot Windows 8.1 with Kali Linux. ~ 64 bit.
I'm having a lot of doubts about it. A lot of people write that their Windows 8.1 system got, excuse my language, ****ed up. They say it's because of OEM/UEFI & so forth.
I'm unfortunately not so experienced with dual booting so i wouldn't really know what to do. What's the problem with Windows 8.1 & Linux, what do I need to do in order to install it successfully without errors?
I am trying to set up my windows 7 laptop so that it duel boots between 7 and 8 which sounds great. My existing W7 partition has been shrunk and a new partition has been created ready for the install however when trying to install using the disk, I keep being told that windows cant be installed onto the partition due to the disk being a MBR format (think that what the three letters are) .
Is there a way round this without having to remove the current install and remove all of my content.
I currently have a machine installed with Windows 8 pro 64 bit installed on one Samsung 840 pro SSD. Works great. I recently added a second Crucial m4 SSD and would like to install Linux on it... I am having major issues doing so mainly because of UEFI... and when installing Linux it does not see Windows 8 installed on any drive therefore making it rather difficult to install both OSes.
I have a Laptop with a 120GB Solid State Drive. My primary operating system has been Windows 7 Ultimate. Recently I decided to try and Install Windows 8 Pro Along side windows 7 . Dual Boot. I read about Dual Booting in this Official Windows 8 Magazine and it seemed easy. I ran into a few problems:
1. I was able to 'shrink Volume' to create another partition of atleast the 20GB minimum required for windows 8. I did 25GB's because my 120gb solid state drive was almost full with other windows 7 files and partitions. The problem I ran into was in creating a 'New Simple Volume' and formatting my new 25GB's of space. An Error message saying "not enough memory or space available to perform operation" kept popping up. Am I getting these error messages because I already have 4 different partitions on my drive? The different partitions were A: Windows 7 OS and Files, B: Windows 7 Hibernation, C: Windows 7 Recovery and D: an unknown 8gb primary partition
2. I decided to delete the Windows 7 Recovery partition, because I have my Windows 7 DVD, and I didn't mind re-installing everything if I were to mess up. Plus my OS doesn't run from that partition, and I'll have room to create my new Windows 8 simple volume. (probably a dumb decision)
3. Disk management didn't want to delete my Recovery partition (probably for good reason) and merge it's free space with my 25GB' partition that I had previously created and was unable to create the New simple volume in. I had to use a 3rd party program called Paragon Partition Manager free edition to do this. I had to restart my laptop for Paragon to delete the 2GB recovery partiton and merge the space with my un-formatted 25GB partition. After the Paragon program finished, my laptop wouldn't boot windows 7 and just hung up with an Intel boot agent screen.
4. Luckily, I had already made my Windows 8 bootable flash drive to Install the OS. Since Windows 7 wasn't booting, I decided to go ahead and try to install windows 8 with my flash drive. It worked! I found my 27GB partition in the setup menu, was able to format it, and install Windows 8. Now windows 8 starts up! My other partition with windows 7 also shows up in Disk management and In my computer!.
5. My biggest question is, How can I make that Windows 8 Dual boot screen pop up when I turn on my laptop? I can boot into windows 7 if I go to Disk Management in Windows 8, Right click my windows 7 partition, and click "Make Active partition". I then hit restart, and my laptop boots to Windows 7 no problem. I Can boot into windows 8 by doing the same Thing in Disk Management in Windows 7. "Make Active Partition" and restart Pc. So in a sense, I have what I want; Windows 7 and Windows 8. But, I shouldn't have to go into Disk Management each time I want to change the system Im using. how to get the Windows 8 Dual Boot option at startup?
I am using Windows 8.1. I have an Acer Aspire V5-571P computer with Windows 8.1 pre-installed. I want to install my licensed copy of Windows 7 Professional on it as a dual boot to dual boot Windows 7 and Windows 8.1. I have seen that it can be done, but I cannot figure out how to correctly do it. I have already had to re-install Windows 8.1 once from a USB Recovery drive which was not fun. So how to do it and get it done. I love windows 7 Pro but I can't figure out how to do it.
I have already turned off secure boot in bios. However, UEFI mode is still active vs legacy bios which is the other mode I have.