Setup Installation :: Dual Booting Win 8.1 X64 And Win XP?
Aug 6, 2014
attempting to setup a dual boot with Win 8.1 and Win XP.
Just a quick break down of my current setup:
a) Win 8.1 x64 is currently installed on my SSD on C: drive partition b) On a different SATA hdd I have an old Win 7 x64 installation that I'm not using any more on one partition
I simply want to replace my old Win 7 x64 installation with Win XP. Why do I want to install Win XP you may ask ? The answer is simple, I want to play some older games that aren't fully compatible with Win 8.1 x64 and neither run good in a virtual machine environment on Win 8.1.
The only thing that is stopping me from attempting this is, has to do with the Win 8.1 bootloader. I simply don't want to lose my bootloader, and I'm afraid that when I install Win XP it might overwrite my Win 8.1 bootloader which will most likely leave me without gaining access to Win 8.1. At the moment the Win 8.1 bootloader lists along with Win 8.1 my old Win 7 x64 installation.
Given my setup of hdd's up top, what would be the easiest way for me to load Win XP on my old Win 7 partition that will still allow me to have the Win 8.1 bootloader with a Win XP boot option on the bootloader menu ?
Should I disconnect my SSD and then proceed to install Win XP on the Win 7 partition and then afterward reconnect my SSD and then using EasyBCD add an entry for Win XP to the bootloader? Or will I run into an issue along the way?
View 3 Replies
ADVERTISEMENT
Dec 23, 2012
I wanted to ask a couple of things about installing Windows XP Home SP2 Upgrade (not full) on a partition (I'll get a cheap old Windows copy for the upgrade to work), with a pre-installed Windows 8 in the other partition.
1) How to do it, found how to install XP on Windows 7. Is it the same procedure?
2) I have heard that installing an XP Upgrade will wipe/reformat an entire HD, both partitions as if they were not partitioned/united. Is that true?
View 9 Replies
View Related
Feb 6, 2013
i have purchased windows8 to upgrade windows 7, install helper confirmed virtually all was ok to do it , windows 8 would not install over windows7 so after talking to microsoft i made a partition and dual booted to see if windows 8 worked, it does. Now i would like to upgrade my existing 7 or migrate all the emails programmes etc to windows8. what is the way to do this do i just try and upgrade windows 7 with 8 or is there a better way.
View 1 Replies
View Related
May 8, 2014
I am trying to dual boot Kali with Windows 8.1 and I keep getting three errors at the installation menu. I also carefully checked that I have followed the installation instructions correctly and I have. Here are the three errors:
1.) "Empty Security Header"
2.) "error:/live/vmlinuz has invalid signature" (I double checked other sources and the grub.cfg file I have saved was/is written correctly)
3.) "error: you need to load the kernel first"
My OS is Windows 8.1 ....
View 1 Replies
View Related
Sep 13, 2013
I have a big problem since 9/9 and I just can`t fix it.
I have a dual boot system and use Windows 8 as my main OS and on the other ssd I have ubuntu 12.10 installed.
My issue started because I completely forgot that I had ubuntu installed on the other ssd (didn`t use it anyway) and tried to raid the ssd...so now I can`t boot anything and I do need to restore my Windows 8.
I have a usb recovery disk which allows me to use cmd but I don`t know how to use to recover my Windows 8 so that`s why I am here.
I ran diskpart on cmd it it shows both disks and both are ONLINE.
Ran chkdsk /f but i keep getting an error and chkdsk does not run
I have asus P8Z77-V LX UEFI Mobo
Intel rapid Smart technology (RST), Intel Smart Connect Technoly is disabled.
CSM is ENABLED ( it was AUTO) and boot device control to UEFI and LEGACY OpROM.
Secure Boot is disabled and I changed the OS type to OTHER OS and also tried WINDOWS UEFI MODE. The setup mode is EZ MODE.
View 7 Replies
View Related
Nov 17, 2013
Currently I have a machine with Windows 8 pre-installed already. But now I don't like Windows 8 as much because certain programs I want to use requires Windows 7. Though I would still like to keep Windows 8 because it's licensed. I have an extra hard drive lying around with Windows 7 loaded in it already. Now I would like to dual boot between these two drives. Do I have to turn off Secure Boot and change the boot orders around to boot the Windows 7 hard drive?
View 4 Replies
View Related
Feb 8, 2013
When Windows 8 menu appears on start and I choose W7 - instead of loading W7directly , the computer is new-starting again and only than starts w7. That's a funny "behaviour"....
Also, after starting the computer, the menu is not directly shown up, first is this turning wi8 circle (like in the setup) and only about 30 sec. later comes the menu. I am using windows 8 enterprise, test version.
View 7 Replies
View Related
Jan 4, 2013
I have a few questions about dual booting windows 7 and windows 8 preinstalled (UEFI) on my Dell laptop.
1. Can I install a non-UEFI version of Windows 7 on my laptop, if so how?
2. Will installing a non-UEFI version of Windows 7 on my laptop break it?
3. Can I use EasyBCD for UEFI?
4. How do I create a UEFI windows 7?
View 3 Replies
View Related
Dec 29, 2013
My girlfriend has recently got a new laptop and unfortunately she doesn't like it, despite me loving Windows 8.1.
She would like to try Windows 8 but is going back to Uni soon so would like Windows 7 as a back-up dual booted.
I've shrunk the partition and created a simple partition for Windows 7 but really unsure about Installing Windows 7 on a Windows 8 Laptop, it's an ASUS X550CA-XX417H. I've checked power shell with SecureBootUEFI and result is True.
What would be the best way to dual boot?
View 2 Replies
View Related
Dec 11, 2013
I cloned my existing Windows installation (8.1 pro, 32 bit) onto my new SSD. I got everything up and running, and I still have my old Windows installation on one of the partitions of my HDD.
Can I turn this setup into a dual boot?
I think this could be useful, in case the new installation gets borked, or in order to run an effective malware scan on the SSD, etc.
View 8 Replies
View Related
Aug 31, 2013
Im trying to install Windows 8 (Not 8.1) but it gets stuck at the booting screen (Where setup shuold load files)
My system specs are on my profile.
View 3 Replies
View Related
Sep 15, 2014
Computer specs, GeForce GTX 760 and i5-4670k CPU. MSI Z97-G45 Gaming Series motherboard. bought this from somebody with no windows installed on it. computer came with no cd's. bought a new copy of windows 8.1. i have the computer hooked up to a 720p hdtv with an hdmi cord. everytime i am hitting enter to boot from the device options it just keeps blinking but it wont boot from device. i think since i am using a tv and not a monitor it may be cutting off some other options on the screen on the bottom that i cant see? or is there something wrong with the computer. i believe the person used the computer before me for about 6 months or so and deleted what ever operating system he had on it before giving it to me. read some stuff about possible uefi bios legacy boot but not sure?
View 1 Replies
View Related
Apr 4, 2014
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB.
2- F 9 to choose boot order.. selected USB device
3- Installation starts for WIN 7
4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy...
5- Driver not found / wrong driver..
6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
View 2 Replies
View Related
Aug 11, 2013
I created USB Drive by Rufus to install UEFI Win 8 x64 Pro, but when I boot by USB, I have this error PC need to be repaired. My mainboard is Gigabyte B75 D3H
View 2 Replies
View Related
Jun 1, 2014
Seen as my Windows 8.1 installation may be completely useless, I am going to booting up from BIOS. I have been putting Windows 7 (32-bit) on my USB drive and when I boot it with my laptop it shows up and says "Reboot and select proper device or insert boot media and press key". I have some important exams coming up and I need to do some revision - plus this is my only laptop!
View 8 Replies
View Related
Sep 15, 2014
After sorting out my problem installing multiple Hard Drives and getting past that I am now faced with another problem, which is that no screen is displayed on start-up to allow selecting other drives to boot from.
I can select other drives to boot from if I boot up into the default drive and select "Change PC Settings" but that is very slow and allows mistakes if one is tired.
I think the reason for the problem is because I installed all the drives on their own separately (took out the other drives) and they are now all installed properly except for this problem.
I only need to boot from the default drive when I need to do something with that particular drive or to boot from "Windows 7 Ultimate" I tried to fix the problem with Drive Freshen (I think its called) but that didn't work.
Is there a way to fix this problem and have the screen that offers to allow booting from another drive added to the default drive, without doing a total re-install?
On a multi boot system it is the first screen to display before booting the OS, and shows all the installed Drives in boxes with their names (labels) on, so that you can choose which Drive to boot from..
View 6 Replies
View Related
Mar 22, 2013
Just installed Win 8 on a new hard drive. "Almost" everything works fine. However my scanner, colorimeter and a couple programs are not compatible. I do not need to use the incompatible hardware/software very often. But when I do, I would like to boot the computer into XP and use them. I've done some research on this topic. Partitioning the Win 8 primary drive does not appear to be an issue. But, can I dual boot 2 operating systems if Win 8 is now the primary and only OS on the HD?
View 6 Replies
View Related
Feb 8, 2013
I have upgraded my windows 7 ultimate to windows 8 pro a month ago and activated accordingly.
3 Days ago I tried to install Linux OS on XP partition ( earlier I had a XP+ Windows 7 dual boot and I upgraded windows 7 to Windows 8 Pro).
Unfortunately installation of linux failed and Windows 8 Pro is not booting now
How can I restore/re install windows 8 pro??
I tried by inserting repair DVD , but getting message of " repair could not possible".
Actually windows 8 Pro partition is not formatted, only the partition of XP got formatted ( earlier I had a XP+ Windows 7 dual boot and I upgraded on windows 7) .
Right now PC showing some message regarding Intel/processor/..etc.. on a black screen.
Actually I am least bothered about my personal files.
My ultimate concern is regarding activation of windows 8 pro with same product key.
Is there could be any problem with activation of windows 8 PRO?? and what procedure I have to follow?
View 4 Replies
View Related
Mar 4, 2013
As Windows to Go is only available for ENTERPRISE versions and booting from a VHD requires there to be an OS already installed on the physical machine I was wondering if we could "Borrow" a trick from Linux.
Is it possible to install a Mini GRUB boot loader on a partition on an external HDD and on a second partition boot a Windows system.
Note here -- I want a RUNNING WINDOWS SYSTEM -- not an install / recovery / "Win PE" type system -- but a full Windows system that will work even if there is NO usable INTERNAL HDD drive in the computer.
Googling shows quite a few ways of either creating an INSTALL disk (HDD) or booting a VHD neither of which are what I want.
Using GRUB and booting an external HDD in theory should work -- and this should "almost replicate" a Windows to Go system.
(I've had an external USB Linux system with VMware player installed -- that method works but the Windows system is quite slow even on an external USB3 drive -- running a Windows system natively should be a lot better).
I've actually got a spare SSD which I want to use for this -- I replace a 128 GB drive with a new Samsung 256 GB drive as I got a great bargain on it -- 99 GBP LESS 20% VAT which I got back at customs at the airport.
I'll use the SATA==>USB3 connector for connecting to the PC.
(Another possibility might be to get the Linux boot loader to load a Windows VHD from the external drive as well -- but I want the Windows system to work even if there is NO INTERNAL HDD in the computer).
View 9 Replies
View Related
May 23, 2014
I got an old computer, and my sister still is using it, it had XP but since support ended I decided to go for another system, unfortunetly there were no drivers for Vista and up, so I went for a USB boot - Linux Mint Maya 13 installation. The PC ended up being even slower and a friend just recently showed me how to install the drivers for Windows 8. I decided to go with a USB installation but when I restart and boot from the USB to install Windows 8 Pro, it says: Disk Read Error. I tested the USB on my new PC that I use and it did boot, but it won't boot from the old one.
View 2 Replies
View Related
Jul 27, 2014
i installed windows 8.1 using pendrive after shuting down that laptop is not starting. During boot it is not showing anything.Nothing is happening even after i press f2 or f10 or f12.my laptop is lenovo g570
View 5 Replies
View Related
Nov 7, 2012
Was Wondering because When I used to do it on windows 7 I would Choose Install along side windows but it seems after installing windows 8 Grub Boot Loader is getting bypassed.
View 5 Replies
View Related
Jun 13, 2013
I Have a CPU it was Windows 7 Home Premium installed , i Got windows 8 downloaded from Microsoft . I installed it without a CD . I Extracted the .iso file and Just Click Setup.exe , it was really slow so i left it at my house , when i ome Home it enters windows 8 Home Screen . I am really confused , i thinks its gonna ask me Custom or Upgrade but when I'm home it just ask me what color do you want for your theme . I Inserted the windows 7 CD and Installed on drive B: ( B is a hard disk i made with diskmngmnt.exe ) and it boots to windows 7 , i want to shut down my CPU . I turned it back On ( Restart ) and it just shows me a black screen .
View 4 Replies
View Related
Dec 12, 2013
How difficult would it be to dual boot / put Ubuntu on the Dell Venue 8 Pro as a secondary os?
Would grub work on this tab?
How stable would it be?
View 6 Replies
View Related
Dec 21, 2013
I'd like to dualboot between W8 & Linux, I currently have W8 installed. How to?
RIG
Intel Core i5 4440 CPU
ZOTAC GeForce GTX760 2GB GPU
Gigabyte H87N-WIFI Motherboard
View 14 Replies
View Related
Nov 16, 2013
I have a Sony vaio VGX-TP20E. I put the win 8 disk into the computer and setup up the startup to boot from optical drive. But it skips it and starts up win 7 like it normally does. How can I install windows 8?
The first time I did that win7 had some kind of virus in it so I went to the recovery partition and restored the computer to factory settings.
So my other question is if I do somehow get it to work, do I have to delete the recovery partition or do I leave it alone. Logically it would only be able to recover for windows 7 right?
View 4 Replies
View Related
Sep 15, 2014
I'm trying to dual boot Windows 7 Ultimate 64-bit and Windows 8 Pro. I want to have each OS installed on separate Hard drives. I want the default OS to be Windows 7 (loads automatically) or goes to the boot manager screen and choose either Win 7 and Win 8.
I've been running Windows 7 on an SSD hard drive with a UEFI Boot. I'm looking to install Windows 8 on a WD Caviar Black 1 TB drive.
Steps taken:
-Burnt Windows 8 to DVD to boot and install from.
-Re-ordered boot order to boot from DVD
-Windows 8 install starts
-Windows 8 drive screen - format the WD Caviar Black 1 TB to install Windows 8 on.
-ERROR Message appears - Can't find media location (I didn't write it down but will on next install I will update). Something like 0x00007B. The solution I found was to disconnect my Windows 7 drive (and all other hard drives).
(Issue: won't that affect the set up of the dual boot?)
-Disconnected Windows 7 drive and was able to install Windows 8.
-After successful install of Windows 8 I re-started my system expecting to see the dual boot menu options. However, Windows 8 loaded directly.
-Changed boot drive order to SSD (with Windows 7) then WD 1TB Drive (with Windows 8). However, Windows 7 then loaded directly.
-I rebooted into Windows 8 and went to the boot order menu in Settings > Control Panel > System > Startup and Restore > (might be a few other tabs). The drop down box shows Windows 8 but no Windows 7.
So, I'm sure I did something wrong on the install. Any thoughts?
If the SSD is a UEFI boot should the WD 1TB (Win 8 install drive) be the same? Is it critical to have the Windows 8 drive connected while installing Windows 8 to the other hard drive? If so, I will have to solve the error message I get after formatting the WD 1TB drive during the Win 8 install. (I know not having the specific error code doesn't work - will update tonight with that info).
Also, I have a 2TB drive that I think has a MBR partition. Would that affect things? Should I even have that? I'll confirm that too. Just hoping to possibly get the ball rolling with answers.
View 9 Replies
View Related
Jan 2, 2014
I had my system set up for Dual boot (on separate hard drives) for both Win 8.1 and Win 7. Win 8.1 developed a problem and unfortunately the only back up I had (my fault) was for Win 8 before I installed Win 7 and the dual boot.
I reinstalled from the backup and then updated Win 8 to 8.1. Both the Win 8.1 64 bit and the Win 7 64 bit work OK but the dual boot is now missing in Win 8.1.
Is there any way of repairing/creating the dual boot, either in Win 7 or Win 8, without using BCD Edit?
View 5 Replies
View Related
Nov 25, 2013
Laptop came with Windows 8 and has been updated to 8.1
Installed Ubuntu on a new partition, but no matter how many times I try, I can't get the machine to load Grub at power-on. If I boot Super Grub Disk/Rescatux, I see the installed Ubuntu, but other tools (like EasyBCD) only see Windows.
Apparently, we're no longer using MBR? Everything I used to know about computers seems to have become false in the last year or 2. How do I get Grub working on this new EFI thing?
View 2 Replies
View Related
Nov 26, 2013
I have a dual boot (Windows 7 & 8 on separate hard drives) system that is performing flawlessly. I'm considering doing the free 8.1 update (updating Windows 8), but concerned that it might mess up my current beautiful dual boot configuration.
View 5 Replies
View Related
Jan 5, 2013
just want to check that i can duel boot win 8? in short unplug my win 7 drive and install win 8 on a separate new drive. plug back in and choose between 7 or 8.
View 3 Replies
View Related
