Setup Installation :: Disk Read Error While Booting From USB Drive
May 23, 2014
I got an old computer, and my sister still is using it, it had XP but since support ended I decided to go for another system, unfortunetly there were no drivers for Vista and up, so I went for a USB boot - Linux Mint Maya 13 installation. The PC ended up being even slower and a friend just recently showed me how to install the drivers for Windows 8. I decided to go with a USB installation but when I restart and boot from the USB to install Windows 8 Pro, it says: Disk Read Error. I tested the USB on my new PC that I use and it did boot, but it won't boot from the old one.
View 2 Replies
ADVERTISEMENT
Nov 16, 2013
I have a Sony vaio VGX-TP20E. I put the win 8 disk into the computer and setup up the startup to boot from optical drive. But it skips it and starts up win 7 like it normally does. How can I install windows 8?
The first time I did that win7 had some kind of virus in it so I went to the recovery partition and restored the computer to factory settings.
So my other question is if I do somehow get it to work, do I have to delete the recovery partition or do I leave it alone. Logically it would only be able to recover for windows 7 right?
View 4 Replies
View Related
Sep 15, 2014
Computer specs, GeForce GTX 760 and i5-4670k CPU. MSI Z97-G45 Gaming Series motherboard. bought this from somebody with no windows installed on it. computer came with no cd's. bought a new copy of windows 8.1. i have the computer hooked up to a 720p hdtv with an hdmi cord. everytime i am hitting enter to boot from the device options it just keeps blinking but it wont boot from device. i think since i am using a tv and not a monitor it may be cutting off some other options on the screen on the bottom that i cant see? or is there something wrong with the computer. i believe the person used the computer before me for about 6 months or so and deleted what ever operating system he had on it before giving it to me. read some stuff about possible uefi bios legacy boot but not sure?
View 1 Replies
View Related
Aug 11, 2013
I created USB Drive by Rufus to install UEFI Win 8 x64 Pro, but when I boot by USB, I have this error PC need to be repaired. My mainboard is Gigabyte B75 D3H
View 2 Replies
View Related
Sep 15, 2014
After sorting out my problem installing multiple Hard Drives and getting past that I am now faced with another problem, which is that no screen is displayed on start-up to allow selecting other drives to boot from.
I can select other drives to boot from if I boot up into the default drive and select "Change PC Settings" but that is very slow and allows mistakes if one is tired.
I think the reason for the problem is because I installed all the drives on their own separately (took out the other drives) and they are now all installed properly except for this problem.
I only need to boot from the default drive when I need to do something with that particular drive or to boot from "Windows 7 Ultimate" I tried to fix the problem with Drive Freshen (I think its called) but that didn't work.
Is there a way to fix this problem and have the screen that offers to allow booting from another drive added to the default drive, without doing a total re-install?
On a multi boot system it is the first screen to display before booting the OS, and shows all the installed Drives in boxes with their names (labels) on, so that you can choose which Drive to boot from..
View 6 Replies
View Related
May 8, 2014
I am trying to dual boot Kali with Windows 8.1 and I keep getting three errors at the installation menu. I also carefully checked that I have followed the installation instructions correctly and I have. Here are the three errors:
1.) "Empty Security Header"
2.) "error:/live/vmlinuz has invalid signature" (I double checked other sources and the grub.cfg file I have saved was/is written correctly)
3.) "error: you need to load the kernel first"
My OS is Windows 8.1 ....
View 1 Replies
View Related
Mar 4, 2013
As Windows to Go is only available for ENTERPRISE versions and booting from a VHD requires there to be an OS already installed on the physical machine I was wondering if we could "Borrow" a trick from Linux.
Is it possible to install a Mini GRUB boot loader on a partition on an external HDD and on a second partition boot a Windows system.
Note here -- I want a RUNNING WINDOWS SYSTEM -- not an install / recovery / "Win PE" type system -- but a full Windows system that will work even if there is NO usable INTERNAL HDD drive in the computer.
Googling shows quite a few ways of either creating an INSTALL disk (HDD) or booting a VHD neither of which are what I want.
Using GRUB and booting an external HDD in theory should work -- and this should "almost replicate" a Windows to Go system.
(I've had an external USB Linux system with VMware player installed -- that method works but the Windows system is quite slow even on an external USB3 drive -- running a Windows system natively should be a lot better).
I've actually got a spare SSD which I want to use for this -- I replace a 128 GB drive with a new Samsung 256 GB drive as I got a great bargain on it -- 99 GBP LESS 20% VAT which I got back at customs at the airport.
I'll use the SATA==>USB3 connector for connecting to the PC.
(Another possibility might be to get the Linux boot loader to load a Windows VHD from the external drive as well -- but I want the Windows system to work even if there is NO INTERNAL HDD in the computer).
View 9 Replies
View Related
Oct 9, 2012
I have a toshiba laptop running windows 8. I went to delete photos off a usb when my laptop froze. I turned off the laptop by the power button waited, then when I turned the laptop back on it came up with the message
A disk read error occurred press ctrl alt del to restart
Each time I press ctrl alt del it returns to this message. I can only go to F2 or F12.
View 9 Replies
View Related
May 27, 2014
Have 2 hard drives (SSDs).
Drive 1 : OS Win 8.1 for general web, office and junk running
Drive 2 : OS Win 8.1 for tweaked hobby work; Audio recording etc
Whilst I wish to not physically disconnect the drives on each boot. I would like to have the alternative drive hidden and not impacted when the other drive is running for the OS.Boot up from Drive 1 this currently shows as Drive C: and the secondary drive with the OS installed as D:
Boot up from Drive 2 this currently shows as Drive C: and the secondary drive with the OS installed as D:
End aim
Boot up from Drive 1 this currently shows as Drive C: and the secondary drive with the OS installed not running or showing on the system and vice versa. Is the online offline function what I need to use or is this going to put the drive offline for the system as a whole.
View 4 Replies
View Related
Sep 30, 2013
I have read some threads other info about shrinking the c drive where the os is,but none have ever said that it cannot be shrunken using the windows provided disk management but seems to talk around it?
View 9 Replies
View Related
Sep 15, 2014
I just bought a new SSD and did a fresh install of windows going from Windows 7 to 8.1.
I simply took out my old SSD and put in the new one, and installed windows 8.1 pro from a USB stick onto the new ssd.
2 existing HDDs were left on there, I'm also replacing them but I want to format them first to remove all data.
Disk 1 is the new SSD that windows was installed on. It is "Healthy (Boot, Page File, Active, Crash Drump, Primary Partition)"
Disk 2 is the drive I want to reformat and replace, it is "Health (System, Primary Partition)"
How do I make the C drive (Disk 1) the System disk?
I have backed up all the files I want to keep onto an external hdd.
View 8 Replies
View Related
Aug 31, 2013
Im trying to install Windows 8 (Not 8.1) but it gets stuck at the booting screen (Where setup shuold load files)
My system specs are on my profile.
View 3 Replies
View Related
Sep 15, 2014
I need to change some setting in my UEFI/BIOS but it is stuck in ready only mode. All options are blanked out except for "exit". How can I get it to let me edit the settings again?
View 9 Replies
View Related
Aug 6, 2014
attempting to setup a dual boot with Win 8.1 and Win XP.
Just a quick break down of my current setup:
a) Win 8.1 x64 is currently installed on my SSD on C: drive partition b) On a different SATA hdd I have an old Win 7 x64 installation that I'm not using any more on one partition
I simply want to replace my old Win 7 x64 installation with Win XP. Why do I want to install Win XP you may ask ? The answer is simple, I want to play some older games that aren't fully compatible with Win 8.1 x64 and neither run good in a virtual machine environment on Win 8.1.
The only thing that is stopping me from attempting this is, has to do with the Win 8.1 bootloader. I simply don't want to lose my bootloader, and I'm afraid that when I install Win XP it might overwrite my Win 8.1 bootloader which will most likely leave me without gaining access to Win 8.1. At the moment the Win 8.1 bootloader lists along with Win 8.1 my old Win 7 x64 installation.
Given my setup of hdd's up top, what would be the easiest way for me to load Win XP on my old Win 7 partition that will still allow me to have the Win 8.1 bootloader with a Win XP boot option on the bootloader menu ?
Should I disconnect my SSD and then proceed to install Win XP on the Win 7 partition and then afterward reconnect my SSD and then using EasyBCD add an entry for Win XP to the bootloader? Or will I run into an issue along the way?
View 3 Replies
View Related
Dec 23, 2012
I wanted to ask a couple of things about installing Windows XP Home SP2 Upgrade (not full) on a partition (I'll get a cheap old Windows copy for the upgrade to work), with a pre-installed Windows 8 in the other partition.
1) How to do it, found how to install XP on Windows 7. Is it the same procedure?
2) I have heard that installing an XP Upgrade will wipe/reformat an entire HD, both partitions as if they were not partitioned/united. Is that true?
View 9 Replies
View Related
Feb 6, 2013
i have purchased windows8 to upgrade windows 7, install helper confirmed virtually all was ok to do it , windows 8 would not install over windows7 so after talking to microsoft i made a partition and dual booted to see if windows 8 worked, it does. Now i would like to upgrade my existing 7 or migrate all the emails programmes etc to windows8. what is the way to do this do i just try and upgrade windows 7 with 8 or is there a better way.
View 1 Replies
View Related
Jun 1, 2014
Seen as my Windows 8.1 installation may be completely useless, I am going to booting up from BIOS. I have been putting Windows 7 (32-bit) on my USB drive and when I boot it with my laptop it shows up and says "Reboot and select proper device or insert boot media and press key". I have some important exams coming up and I need to do some revision - plus this is my only laptop!
View 8 Replies
View Related
Feb 8, 2013
I have upgraded my windows 7 ultimate to windows 8 pro a month ago and activated accordingly.
3 Days ago I tried to install Linux OS on XP partition ( earlier I had a XP+ Windows 7 dual boot and I upgraded windows 7 to Windows 8 Pro).
Unfortunately installation of linux failed and Windows 8 Pro is not booting now
How can I restore/re install windows 8 pro??
I tried by inserting repair DVD , but getting message of " repair could not possible".
Actually windows 8 Pro partition is not formatted, only the partition of XP got formatted ( earlier I had a XP+ Windows 7 dual boot and I upgraded on windows 7) .
Right now PC showing some message regarding Intel/processor/..etc.. on a black screen.
Actually I am least bothered about my personal files.
My ultimate concern is regarding activation of windows 8 pro with same product key.
Is there could be any problem with activation of windows 8 PRO?? and what procedure I have to follow?
View 4 Replies
View Related
Sep 13, 2013
I have a big problem since 9/9 and I just can`t fix it.
I have a dual boot system and use Windows 8 as my main OS and on the other ssd I have ubuntu 12.10 installed.
My issue started because I completely forgot that I had ubuntu installed on the other ssd (didn`t use it anyway) and tried to raid the ssd...so now I can`t boot anything and I do need to restore my Windows 8.
I have a usb recovery disk which allows me to use cmd but I don`t know how to use to recover my Windows 8 so that`s why I am here.
I ran diskpart on cmd it it shows both disks and both are ONLINE.
Ran chkdsk /f but i keep getting an error and chkdsk does not run
I have asus P8Z77-V LX UEFI Mobo
Intel rapid Smart technology (RST), Intel Smart Connect Technoly is disabled.
CSM is ENABLED ( it was AUTO) and boot device control to UEFI and LEGACY OpROM.
Secure Boot is disabled and I changed the OS type to OTHER OS and also tried WINDOWS UEFI MODE. The setup mode is EZ MODE.
View 7 Replies
View Related
Nov 17, 2013
Currently I have a machine with Windows 8 pre-installed already. But now I don't like Windows 8 as much because certain programs I want to use requires Windows 7. Though I would still like to keep Windows 8 because it's licensed. I have an extra hard drive lying around with Windows 7 loaded in it already. Now I would like to dual boot between these two drives. Do I have to turn off Secure Boot and change the boot orders around to boot the Windows 7 hard drive?
View 4 Replies
View Related
Jul 27, 2014
i installed windows 8.1 using pendrive after shuting down that laptop is not starting. During boot it is not showing anything.Nothing is happening even after i press f2 or f10 or f12.my laptop is lenovo g570
View 5 Replies
View Related
Jun 18, 2013
How can you read what files were backed up to a backup disk?
View 5 Replies
View Related
May 26, 2014
I had to reinstall windows. I had a raid 0 with 2 drives, when I started widows the drive couldn't be accessed. so the only option was to convert to dynamic disk. I did that but still cant read or change drive letters. I am pretty sure my data is still on it. but how can I read this disk?
right now I am scanning it with easeUS data recovery and it looks like its finding files. any other way to read the drive?
raid was made with the bios
View 1 Replies
View Related
Aug 18, 2014
I partitioned my hard disk into a 150GB (C) and 500GB (D) and upgraded from Win7 to Windows 8 (and subsequently Windows 8.1 after the recent updates). The OS is installed onto the C Drive.
Performed a Clean Installation of Windows 8 on my C Drive. Under the Choose What To Keep Option, I selected Nothing.
Technically speaking my C Drive would have been wiped clean but after the Windows 8 installation, my C Drive only has 5GB of space left (145GB is being used). The Windows 8 OS is not detecting any of the old programs in my C Drive and the automated Disk Clean up feature only offers removal of temporary internet files. Which brings me to one possible assumption...
The Clean Installation Failed. Windows 8 simply installed itself again on my C Drive and the remaining disk space (containing my previous Windows 8.1 OS and programs) is locked down somewhere. I suspect this had something to do with changing my HD format 3 years ago when I wiped clean my pre-loaded ASUS laptop Win7 and partitioned it to install my Windows 8.
How to remove my previous OS?
View 2 Replies
View Related
Jan 28, 2013
Is it possible not to have the partition "recovery"?
Because if you look at the two tutorials:
- UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with - Windows 7 Forums
- UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
In the tutorial to install Windows 7 in UEFI, there is not that damn partition recovery, while in the tutorial for Windows 8, we can see it.
When I install Windows 7 (MBR mode), I avoid this partition "recovery" by creating a partition with a name before installation. I install the OS on it and everything is fine, no partition "recovery" But here, since one must delete all partitions, If I create a GPT disk with a partitioning tool before installing, is that it might be appropriate?
View 6 Replies
View Related
Jan 3, 2013
I am attempting to install Windows 8 (I currently have Vista) but Autorun doesn't work and when I attempt to access the disk in the CD ROM I am asked if I want to format the empty disk. I recently had to reformat the hard drive back to its factory settings (Vista O/S) for reasons I won't go into. The problem isn't limited to the installation disk.
View 3 Replies
View Related
Aug 13, 2014
I have just bought an AIO Asus desktop with 1 Tb of storage. The c: (Windows)drive is allocated 100gb and the d: drive 931gb. I just want to transfer all the data from my old computer. This was pretty much all in the folder c:>Users>Myname, but when I try to transfer it all into the same folder on the new computer, obviously with 100gb there is not enough space.
View 2 Replies
View Related
Nov 24, 2012
Upgraded to windows 8 pro, worked fine for sometime, but now it does not boot- says either error loading operating system or disc read error. Re installed Windows 8 after booting with another hard drive with winXP, worked fine for sometime, then it failed again displaying the same error messages. Been using this system since long, but this has never happened before. I have reinstalled again by the same procedure, but always wary of the same problem happening again.
View 4 Replies
View Related
Jul 16, 2014
I just purchased an Asus R510CC notebook with windows 8 and I bought a SSD drive to replace the current one.
I used Recovery Drive in Windows to create an USB boot drive with the recovery partition on it. I then installed the SSD and booted from the USB. When I get to the option to reset my computer I encounter an error with the following message: "Unable to reset PC. A required drive partition is missing". I already did a bit of research and BIOS tweaking but I can't install Windows onto my SSD.
View 9 Replies
View Related
Feb 8, 2013
When Windows 8 menu appears on start and I choose W7 - instead of loading W7directly , the computer is new-starting again and only than starts w7. That's a funny "behaviour"....
Also, after starting the computer, the menu is not directly shown up, first is this turning wi8 circle (like in the setup) and only about 30 sec. later comes the menu. I am using windows 8 enterprise, test version.
View 7 Replies
View Related
Jan 4, 2013
I have a few questions about dual booting windows 7 and windows 8 preinstalled (UEFI) on my Dell laptop.
1. Can I install a non-UEFI version of Windows 7 on my laptop, if so how?
2. Will installing a non-UEFI version of Windows 7 on my laptop break it?
3. Can I use EasyBCD for UEFI?
4. How do I create a UEFI windows 7?
View 3 Replies
View Related
