Setup Installation :: Cannot Dual Boot Windows 8.1 With Any Linux Distro
Feb 14, 2014
I really want to dual boot Windows 8.1 with Kali Linux. ~ 64 bit.
I'm having a lot of doubts about it. A lot of people write that their Windows 8.1 system got, excuse my language, ****ed up. They say it's because of OEM/UEFI & so forth.
I'm unfortunately not so experienced with dual booting so i wouldn't really know what to do. What's the problem with Windows 8.1 & Linux, what do I need to do in order to install it successfully without errors?
I tried to set up a dual boot, Windows 8.1 and Linux Zorin 8 on a new Lenovo desktop. I setup the partition first in Windows and then loaded Zorin per the instructions here: [URL].....
Everything seemed to go OK but in the end I didn't end up with the grub boot loader, so I can only boot into Windows. Now I ended up loosing 20% of my hard drive which is now unallocated space that I can't figure out how to reclaim into my hard drive. I tried deleting the partition but it's still there and there was no option to expand volume.
I've been messing with lubuntu and backtrack and decided to install Backtrack5 on my laptop(Lenovo N586). I couldn't boot into windows 8.1 after installing Backtrack5 R3, but I had no problem booting into backtrack(I think I made a mistake of installing backtrack bootloader in the same place where Windows bootloader was...). I was able to boot into windows 8.1 after fixing the windows bootloader, but this time I couldn't boot into backtrack5. I wanted to start fresh and uninstalled Backtrack5 using boot-repair-disk. And ever since I uninstalled the backtrack5, I cannot boot into anything unless I use live linux usb. I've literally tried almost everything I could find in the past a couple of days on the internet including the forum. It says my hard drive is locked and I don't really have any available options that actually work(like refresh, start up repair, diagnostic, reinstall, nothing works). Windows 7 recovery CD didn't work saying I am using different version of OS, so I should use different recovery CD.
I dual boot Windows 8.1 and linux, and I was wondering how to boot into the windows BIOS. I would like to enable virtualization so that I can run 64 bit virtual machines, but it does not give me the option to boot into the BIOS. No pressing Esc, delete, F11, or F12 boots me into the BIOS. I was not able to boot into the BIOS even before dual booting.
Have a sony viao laptop with Intel(R) Core(TM) i7-3632QM.
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
Late last Fall I bought a new Desktop, an HP H81414, with Windows 8 installed with the intention of installing Windows 7 on an SSD. I migrated Window 8 to an SSD, removed that from the system, installed new SSD and put Windows 7 on it. Both worked fine. I wound up with 2 SSD's. capable of running on the EFI BIOS machine with Secure Boot turned off. I later bought a new laptop with Windows 8. I found the Win 8 with Classic Shell to be very acceptable.
What I would like to do now ,if possible, is to mount both SSD's in the HP case and switch to either one of them at boot.
So I have a Toshiba laptop with win 8 preinstalled in it I want to dual boot it with win XP However I managed to boot to the CD after some research but when I reach to installing win xp to my virtual partition I can't seem to find it I just see my HDD as one without a partition... what can I do?
Dual boot... I installed a new SSD and want to install a clean copy of Windows 8 Pro 64 bit on it while retaining Windows 7 Home Premium 64 bit on my existing HHD. I have an upgrade copy of Windows 8. Will I be able to dual boot with this set-up?
I have both 7 and 8 installed in a dual boot system and have now decided that I no longer need Windows 7.
I have read and re-read the tutorial on removing Windows 7 so I am very familiar with the method however, it does not work for me. In disk manager I select the partition to be deleted and right click on it as instructed in the tutorial. In the drop down menu the option to "delete volume" is greyed out and not available so I am stuck.
I have a sony vaio vpcyb3v1e. I have windows 8.1 installed and i tried using a bootable usb to install as multi boot, the xp black edition on a separate partition. After doing that i couldn't be able to login in the windows 8.1 OS. I got the message Load needed DLLS for kernel.
I have a question on the best way to install Windows 7 as a dual boot on an existing Windows 8 installation on a new Asus Laptop. Most of the tutorials I've seen assume the pre-existing installation is Windows 7, and say that Windows 7 needs to be installed first, not an option when your Windows 8 comes pre-installed.
I have an Asus F75, and here is the partitioning: 1. 300 MB EFI System Partition, FAT32 2. 900 MB NTFS Recovery Partition (would seem to be the MS Reserved partition, is that correct?) 3. 279 GB NTFS OS Partition 4. 398 GB NTFS Data Partition 5. 20 GB NTFS Recovery Partition
It sounds like after installing Windows 7, the boot menu will be the Win7 text boot selection menu if you use that as the default OS, which is what I plan on doing, so I believe there isn't anything I need to do to that, is that correct?
I have turned of Fast Boot in Windows 8, and disabled Secure Boot in the system BIOS.
What should I do about the existing Data partition, which will be the Win7 partition. Should I:
a. Leave that intact and simply install Win7 to it, or b. Delete the partition, install Win7 and allow the install to manage the unallocated space?
Do I have any other considerations other than collecting all the Win 7 drivers for the laptop (which I have already done)?
I had windows 7 running on my computer. When windows 8 came out I used a second harddrive as the windows 8 installation drive. Windows 8 automatically setup a dual boot system where every time I started the computer it took me a windows screen where I could select either windows 7 or windows 8. This has been going on since Windows 8 was released.
I decided it was getting old so I decided it was time to remove the old windows 7 harddrive. I tried doing it inside the windows 8 dual boot screen but could not find an option. So I decided to reformat the windows 7 harddrive. I did this in command prompt mode. After doing so when my computer restarted it said it could not find any harddrive to boot. Windows 8 is installed on the other harddrive, the one that was not reformatted. So how do I get it to start using that harddrive as the boot drive? I checked my bios and even physically disconnected the old HD that had windows 7 on it, but none of that seemed to work even though the Windows 8 HD is definitely in the boot order in the bios.
I've had Win 7 Pro on my laptop for over a year. I installed a 2nd hard drive to it recently and today I installed Windows 8 Pro on the 2nd hard drive. It's been a roller coaster of good & bad luck.
The first install went fine, until I tried to install the Windows 8.1 upgrade from the Windows store, then things went bad and I had to go into Windows 7 and eventually delete the Windows 8 volume and change it from MBR to GPT because of UEFI (no secure boot enabled). What a stretch of error messages telling me I can't install Windows 8 on the blank hard drive because it was or wasn't MBR or GPT, or the automagically made partitions weren't in the right order.
After spending over 7 hours twice in a row installing Windows 8, I finally find out that there's no boot option for Windows 7 anymore.
The only clue I have is to use a Windows 7 repair disk and use diskpart.exe and make the Win 7 drive "active" but that's a little foreign to me at this point.
I'm looking in Computer Management / Disk Management from within Windows 8.
Disk 0: SYSTEM D: 438 MB NTFS (lengthened from 199 MB with EaseUS because Acronis 2014 thought it too small while crashing), Healthy (Active, Primary Partition); Win 7 E: 930.98 GB NTFS Healthy (Primary Partition); HP_TOOLS F: 102 MB FAT 32 Healthy (Primary Partition)
Windows 8, linux, Partition....I would like to use my new laptop with windows 8 pre-installed to the following:-
Create a Dual Boot Windows 8 / Ubuntu- Create on my C drive (unique drive on my laptop):*a partition for the system*one for Windows 8*one for Data and *last one for Ubuntu OS
My aim is :-to install VmWare on Windows 8 and run Checkpoint Splat with virtual machines to perform CCSA labs.- to install GNS3 on Ubuntu for CCNP labs but with GNS3 accessing files in the Data partition.
I have a Toshiba Satellite with 750Gb and 8 Go RAM.According to you what's the best size for my partitions?Is there a better way to partition my C drive regarding my aim?
I have been researching installing Ubuntu alongside Win 8.on my daughters laptop. I already boot Ubuntu & Win 7 on my desktop pc, but I have read some horror stories about installing Ubuntu with Win 8., mostly in regard to the uefi boot system in Win 8., as well as, its a laptop as opposed to desktop.
I have been told that i must enter the bios first and disable secure boot. Most of the tutorials I have read are very complex. Then i read a tutorial from this website, dated 2011 that appeared to be simple, and similar to my own Ubuntu/Win 7 installation, however it was dated 2011.
Dual Boot Windows 8 And Ubuntu : Windows 8 Guides
The only difference with my intended installation is that I will use a dvd as my Pc does not have a USB Boot option.
Used to run Win 7 on our main drive, and used a second one for storage (mainly games), however something happened, making us unable to boot. So we decided to upgrade to Windows 8, which we put on our secondary drive, and that's now the main one (boots from here, is Disk 0). When I turn on the PC, it asks me whether to run on Windows 7 or 8 (8 is the default). C: contains Windows 8, D: Contains Win 7.
MAIN PROBLEM: Since we're going to use the old main drive as storage (the one with Windows 7), I wanted to format it, but it won't let me because, I suppose, of the System files still on it (System, Active). Picture of Disk Management below. How do I format it?
I have a big problem since 9/9 and I just can`t fix it.
I have a dual boot system and use Windows 8 as my main OS and on the other ssd I have ubuntu 12.10 installed.
My issue started because I completely forgot that I had ubuntu installed on the other ssd (didn`t use it anyway) and tried to raid the ssd...so now I can`t boot anything and I do need to restore my Windows 8.
I have a usb recovery disk which allows me to use cmd but I don`t know how to use to recover my Windows 8 so that`s why I am here.
I ran diskpart on cmd it it shows both disks and both are ONLINE.
Ran chkdsk /f but i keep getting an error and chkdsk does not run
I have asus P8Z77-V LX UEFI Mobo Intel rapid Smart technology (RST), Intel Smart Connect Technoly is disabled. CSM is ENABLED ( it was AUTO) and boot device control to UEFI and LEGACY OpROM.
Secure Boot is disabled and I changed the OS type to OTHER OS and also tried WINDOWS UEFI MODE. The setup mode is EZ MODE.
I am trying to set up my windows 7 laptop so that it duel boots between 7 and 8 which sounds great. My existing W7 partition has been shrunk and a new partition has been created ready for the install however when trying to install using the disk, I keep being told that windows cant be installed onto the partition due to the disk being a MBR format (think that what the three letters are) .
Is there a way round this without having to remove the current install and remove all of my content.
I currently have a machine installed with Windows 8 pro 64 bit installed on one Samsung 840 pro SSD. Works great. I recently added a second Crucial m4 SSD and would like to install Linux on it... I am having major issues doing so mainly because of UEFI... and when installing Linux it does not see Windows 8 installed on any drive therefore making it rather difficult to install both OSes.
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB. 2- F 9 to choose boot order.. selected USB device 3- Installation starts for WIN 7 4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy... 5- Driver not found / wrong driver.. 6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.