On all of our Windows 8.1 clients, every time a user tries to add a printer using the 'add a printer' wizard, it triggers alerts from our secure network devices indicating that someone's trying to log in to them with SNMP.
We need the failed logon notifications but it's incredibly annoying to get these all the time.
Any way to disable the SNMP scan when adding printers? Windows 7 didn't do this. Nor did windows 8 base as I recall.
I've once again encountered this problem with my Canon PIXMA MP620 printer/scanner: when using it wirelessly, it can't print. According to 'Devices And Printers', it's offline and therefore most programs I use in Windows 8.1 claim it can't print.
However, using Canon's program 'MP Navigator', it can scan from the printer without any problems. I can scan from the computer to the printer and the other way around. Therefore I'm suspecting that the problems lies with Windows 8.1 and not the printer. The connection is obviously there but Windows doesn't seem to think so.
I can't find a solution in the printer's manual, Windows doesn't give me anything when I try to troubleshoot the printer in question, and Canon's own 'Network IJ Tool' can find the printer but says it's doesn't work without clarifying why.
I am in the midst of the final steps in setting my my new Win 8 system.
I have a Win XP and Win 8 computer on my home network. I believe that I have set up file and printer sharing correctly. I can access the files and printer on the XP system from the Win 8 system. However, when I attempt to access the Win 8 files from the Win XP system, I get a long delay (about a minute or two) and then it asks me for the User Name & Password. I enter them and then and it works fine.
If I try to print on the printer attached to the Win 8 system from the XP system, I get a printer error unless I have already signed in with the ID & PW when accessing files. It never asks me for an ID & PW before attempting to print.
On the Win 8 system, I have selected "Turn off password protected sharing" in the "Network and Sharing Center/Advanced Sharing Settings".
The Win XP system has previously been correctly sharing files and printers with another XP system for some time and I haven't changed any settings on the XP computer.
Both the XP and Win 8 systems are assigned the same Workgroup name.
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
When I turn on my Toshiba Satellite laptop, it does not see my i-phone hotspot. Wi-Fi status says "No Wi-Fi connections available". I always have to turn the hotspot off and then back on after the laptop is up and running for the laptop to find it. This does not happen with my desktop. It sees the i-phone hotspot without the need to cycle the hotspot off and back on, so I'm thinking that it has to do with the Toshiba rather than the i-phone. Both laptop and desktop are running Windows 8. Not a big problem, but I thought some one may know of a setting which I need to change.
new build win 8.1 I am trying to configure an HP printer driver to digitally scan to a specific folder on a hard drive it says "the device needs to authenticate itself on the network before it can save to a network folder" then asks for my user name and password (not the wireless router name and password) direct Ethernet connection from main computer to router I have tried many variations without success how do I figure out my network computer and user name: in net speak ? e.g. ????????username ?? the Microsoft account adds a whole new level of complexity and woe is my user password my pin number or is it my MS account password or something else is my user name "Robert" as listed in windowsusers folder or is it some variation of in "netspeak" my new build screams but I am undergoing the usual trials of a new clean install (Win 8.1)
I have a windows 8 64 bit system. There is a laptop with windows 7. I have my canon mp470 printer plugged into the windows 8 system via usb. Up until a few days ago we could printer from the windows 7 laptop through the network. I have done 2 things since then. 1.) I uninstalled mcaffee internet security and installed nortons internet security and 2.) I tried to update to windows 8.1 which failed part way through the update then it said the system was reverting back to windows 8.0
Now I can't print from the laptop. (nothing changed on the laptop only on the windows 8 system).
I'm using Windows 8.1 Professional. After the update to 8.1, I can't connect to my network printer which is connected to a Windows XP Home machine. Everything was working before the upgrade. I can currently see, connect, access and modify files on all the computers. I keep getting a message that I don't have permission to access the printer and I can't access the permissions on the Windows XP computer. I'm also using a Windows 7 computer which has no problem accessing the printer.
My friend got a new computer and is trying, unsuccessfully, to connect to a network printer that he says he has used in the past, in his one man office. He gets his internet access through a wireless router. But the printer is connected via Ethernet cable to a second router that does not have internet access, but does have two printers connected to it.
So his new computer is connected to two different networks, the wireless network, and the wired network. I'm not familiar with having your computer connected to two networks simultaneously.
So my question is, is there any problem doing it like this, and should the network printers show up when the computer does a search in Add Printer? Because it does not find anything right now, not sure if we need to be looking at the printers, the router, or the computer.
He is not able to connect the printers to the wireless router, they are in different rooms. And there are no other computers connected to either network right now.
When I tried to add the printer the dialogue shows the printer I want to connect to. Then says that I need to download the HP drivers to my computer. When I say yes a message comes up that says I can't connect to the printer with an error code of 0x000003e3.
I am using the N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2 This has 2 channels 2.5ghz and 5ghz .
On my main desktop windows 8 has sucessfully found and connected wirelessly to the 2.5ghz connection. However, when I want to do video streaming the 5ghz connection would be better.
On my other devices I can search / scan for all available connections and I can see both the 2.5 and the 5 connections. For example, my laptop running windows 7 can see both connection and I can choose which one i want to connect too.
However, Windows 8 seems to have locked into the 2.5ghz connection and cannot see the 5ghz connection . Is there a way to force Windows 8 to scan again so it can see the 5ghz connection ?
I'm trying to discover my Wi-Fi enabled printer (Brother MFC-J425W) by trying to plug in the ip address of the printer manually. I am currently using this online reference - How to install a Standard TCP/IP Printer on Windows 8? - Welcome to TP-LINK - to go through the particular process. When I open up the advanced printer setup window in the hardware & sound category of the control panel, it starts searching for printers and then freezes on that task. I cannot press the next, cancel, or quit ('x') button at the top right of the screen. This is a brand new laptop that I just got in today with some top of the line hardware for its class, and I am currently connected wirelessly to the same network that the printer is on, so there should be no issue as far as I'm aware of on the discovery of the printer.
I have just set up two new laptops running windows 8, and can successfully share files, and the printer connected to one of them, but I would like to also connect my laptop running Vista to be able to print. I can see both Windows 8 machines in file manager/devices on the Vista machine, but if I try to connect it asks for a username and password.
I haven't been able to work out what username it is looking for - tried a lot of combinations for each PC name with the homegroup password and log on passwords, but nothing seems to work.
I'm having trouble connecting my wifi printer (Canon pixma mg3100) and my Lacie Network Space on Windows 8, while I haven't experienced any problems connecting these same devices to my Win7 computers.
The driver for the printer is, according to Canon, compatible with windows 8.When I install the software on both my windows 7 laptops, it immediately recognize the network and after 5 minutes I can print wireless without any problems.
However when I try to install the same software on my Windows 8 computer it keeps asking to first plugin a usb cable and do a lot of manual steps, like pressing several buttons on the printer, it's ridiculous! After a while the software succeeds in finding my Wifi but it keeps on saying 'unable to connect'
My Windows 8 laptop is a brand new Dell Inspiron and I didn't change any network settings.
I have a home network with an XP system with a printer attached and shared. A Windows 7 laptop and my old XP laptop from work can print fine, but a new Windows 8 laptop won't print. Sharing from the XP system works as I can read files from the XP system on the new Windows 8 system. When I do an Add Printer on the Windows 8 laptop, I can see the network printer and install it and the driver so the printer shows up as installed on the Windows 8 system. The Print Test Page does not work nor printing from WordPad. I turned off the Firewall on the XP system in case that was the problem.
In continuation to my previous thread on this subject, I now have another network printer problem in the same system. I chose to open it in a separate thread because the previous one became too long.I have 3 PCs on my home network
1. Windows XP (SP3) desktop with HP6500 E709a USB printer.
2. Windows 7 (Ultimate SP1 64 bit) desktop with HP 1018 USB printer.
3. Windows 8 (64 bit) laptop.
All computers can see each other and share folders on the home network.
Computers 1 & 2 can freely print on their own printers, as well as on each other's printer. Computer 3 (Windows 8) can print on the HP6500 (which is connected to the XP computer), but cannot print on the 1018 printer connected to the Win7 computer.
I know that on the Windows 8 laptop I have to define a local port for the network printer, but when I try to do it I get "Access denied" error message. Win7 denies access from Windows 8. This is strange, because Win7 does allow access to XP. On the WIN7 computer, under printer properties/security, print permission is granted to "Everyone".
So what could be the reason for the "Access denied" error? I guess it has to do with security / users / permissions, but I cannot find a solution.
I think I'm fighting a network permissions problem, but I'm stuck.
I have reliable connections to my DSL modem and to the internet. I would like to enable/disable my network interface, in this case the ethernet connection to my DSL modem, (not the DSL modem connection to the phone line).
After cruising through the Control Panel/Network and Sharing/Change Adapter Settings/ menus, I made a desktop shortcut to my Ethernet device. Right clicking on the shortcut shows a context menu with "Disable". This option works fine and cancels the connection to the modem. After that, the shortcut context menu remains the same: no option for "Enable" is shown.
However, if I follow "Open file location" to the control panel's Network screen, the context menu for the target icon DOES contain "enable". More strange: after clicking on main Network context menu, now the desktop shortcut displays "Enable". Sometimes nothing "enables" until I run the "Diagnose" option several times with administrative priv. (I am the administrator).
Scanning device is an HP Photosmart All in One HP 2575. i first installed it as an USB device and Windows Fax and Scan recognized it and scanned nicely. I then installed it as a network device and WFS would not recognize it as a scanning device when I unplugged the USB cable. It prints just fine but will not scan.
My laptop tends to install all the printers on the network where I work. I dont use any of those printers and having them installed is pointless and a pain. I can delete them, but it will go and install them all again. Is there anyway I can disable this so it doesn't keep doing it?
Windows detects my Ricoh AC104 on a wireless network but insists it's an HP 5Si MX and installs that driver. When it adds the printer, it loads the driver automatically and without choice or prompt. Perhaps the misidentification has something to do with the printer driver in between (Hawking HMPS1U). I need to force it to use the printer driver from Ricoh, but I've had no luck so far. Some things I've tried:
1. There's an installation program with the Ricoh driver, but it doesn't see the printer on a wireless network.
2. Going to the advanced options for the printer on the device manager, I can see the driver info but Windows will not permit changes. I tried as Administrator also. No difference.
3. Attempting to update the driver just leads to Windows telling me the (wrong) driver is up to date.
I am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.