Laptop Stuck In Scanning And Running?
Dec 9, 2013
Today I got an IO error when trying to upload a song to a music site. After doing research it said to run a test on command. Once I restarted my laptop it stated scanning and tunnibg. My computer went to safe mode but would not come out if it. I had no choice but to press down the power button. I tied it back on and it ran again. After 10mintues it went to 27% and stayed there for an hour. Now it went to sleep mode again. I don't know what yo do. I can't stare at the computer for ever to keep it from not going to sleep mode. My laptop is a year old and is an HP.
View 1 Replies
ADVERTISEMENT
May 25, 2014
I have this problem where it takes approximately 5 minutes to boot up my Lenovo Y500 (Windows 8, 64-bit) laptop. I had this laptop for almost an year. It was fine in the beginning, took around 20 seconds to boot. However, over time when I restart my computer because of the windows update or defraging, I noticed that it took extremely long to boot, like 5 minutes. It would be stuck on the Lenovo logo with the spinning circle for 5 minutes.
After that there is no problem getting to my desktop. I assumed my HDD (1 terabyte) had a problem. I ran all different programs to diagnose the HDD but it all said it was in "OK" status. So, I did the chkdsk on the CMD and it prompted me that it'll start when I restart my laptop. So I did and now it's stuck on scanning and repairing drive (C: 27% complete for almost 12 hours.
I am not sure how long I have to wait and if it's going to be 27% forever. I have approximately 250 GB / 1 TB on my HDD. I tried doing recovery but it would not work either. If I tried booting through safe mode, it would continue to do the same thing, Scanning and repairing drive (C 27% complete and stuck there. So finally, I tried going for the recovery USB boot drive since I cannot use the recovery built-in the laptop nor have the recovery disc.
However, I was looking in Google how to make a recovery USB for windows 8 (64-bit) but it all looked like you have to be in Windows 8 in order to make a recovery USB drive, but I am stuck on the Lenovo logo screen. Is there an alternative solution to this? Is there a downloadable recovery drive so I can make it boot to the USB?
View 4 Replies
View Related
Sep 15, 2014
I wanted to do a system restore on my Toshiba laptop but when I tried Windows just restarted, gave me error 0x81000204 and told me I should run chkdsk /R. I tried to run chkdsk and everything was going fine and working at a normal speed until it got to 10%, at which point it got stuck and has been at 10% for over two hours. The circle on screen is still spinning so I know my laptop hasn't frozen or anything. I don't really want to have to cancel the disk check because I want to be able to do my system restore, so I was wondering if there's any way to fix this without cancelling, restarting etc. Or if I have to cancel the disk check, how can I do a system restore without doing another disk check and getting stuck again?
View 1 Replies
View Related
Feb 26, 2014
Windows 8 Scanning and Repairing (C:) on Startup - PROBLEM
Laptop model: toshiba satellite l70d-a
Age: 3 months old
Problem: when loading laptop Scanning and Repairing drive C stuck at 100%. I cannot do anything else than removing the battery. Started suddenly. I have tried to see if there were hd problems but found nothing.
I have opened the registry and (following the suggestion from the thread above I have looked at HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession Manager) the reg key is:
autocheck autochk *
And also, since we are talking about the registry, if anything goes wrong how do I reload the registry backup I have just made?
View 3 Replies
View Related
Dec 28, 2012
I'm having troubles with a disk check.
Firstly, I'd like to mention that I've had this PC for a while... I've even taken the whole thing apart and swapped out all of the components (slowly upgraded over time). It's actually at the stage where I've been left with all the old parts as spares, and put everything back together, almost exactly as it was when I bought it. All in all, the initial build is probably 2 or 3 years old now (for the most part, the specs can be found here).
After formatting the hard drive, putting things together back with the old build, and booting up Windows 8 onto it as a gift for my dad, most things were working fine, but one exe file which I copied across wasn't running (at least one which I noticed). I checked up the error code, found people with similar problems, and heard it could just be that the file was corrupted.
So, to get to the main point... I figured it wouldn't hurt to run a disk check, in case there were any other errors or problems. I knew it would take a while, so I opened command prompt, and typed in "chkdsk C: /r", before hitting enter, letting it schedule the disk check for next startup, rebooting the PC, and then leaving it to do its thing. It's been running probably for about 4 or so hours now, and for most of that time it's been at 27% on "Scanning and repairing drive (C:)". Normally I'd just give in and force shut down at this point, but I'm wondering... what's the best course of action if it doesn't get anywhere with this?
I'd really prefer not to force shut down, in case it causes any errors... I mean to say the least it's taken some effort and persistence to get the old build up and running again.
View 9 Replies
View Related
Mar 3, 2014
I have been having trouble with my laptop lately. I was trying to install a new driver for my graphics card when my computer suddenly rebooted, I was forced to refresh Windows 8, then an even bigger problem happened, windows kept thinking that it was not registered but when i go to system from the control panel it says it is registered and gives me the product code, so I read somewhere that doing the chkdsk scan will fix this so i did it, first it was stuck 27% for about 4 hours then it is currently stuck at 100%, its been at 100%for about 13 hours now. I do not know what to do, afraid to force restart, might cause errors.
View 7 Replies
View Related
Jul 8, 2014
I have tried to run boot time scan and repair then restarted then the scan started then when it reaches 11% the wheel still turning but stuck at 11%.
View 1 Replies
View Related
Feb 4, 2014
My windows 8 HP laptop keeps getting scanning and repairing drive D 100% complete and just stays there and nothing happens. And sometimes it goes on and it just becomes a black screen... My laptop was shut down for a few weeks and this happened and I need it again now... I got a new laptop which is why it stayed off but now i need it again. What should I do? I don't care if everything on it gets erased. I actually prefer to format it. Moreover, my f keys dont work nor does my escape button.
View 4 Replies
View Related
May 13, 2013
I don't know why but it has randomly started doing this in this order-
1. I turn it on, it does the normal start up screen of "Toshiba" and the loading animation underneath.
2. After a long time of waiting it takes me to a black screen. It stays that way for about 5 minutes, sometimes it does not do this and skips to:
3. Blue screen of death. It tells me it is going to restart and stays on this screen for less than a second. It repeats all 3 of these steps and does not stop.
Toshiba Satellite L850D-12P
Windows 8
View 3 Replies
View Related
Nov 16, 2013
Turned on my laptop earlier, and tried checking for updates. Saw around 250MB worth of updates, clicked install, and Windows Update locked up shortly afterwards. Restarted Explorer, and Windows Update still wasn't working, so I rebooted.
Tried checking for updates again, and now I'm stuck on that screen (the progress bar moves, but it's seemingly not finding updates).
What caused WU to freeze. My desktop (set up in basically the same exact way) handled it fine. I tried a Disk Cleanup (to cleanup WU files) and a reboot to no avail.
View 6 Replies
View Related
Dec 22, 2013
I was using my laptop yesterday when I went to lock my account. When I did this, the laptop presumed to shut off. It now boots up fine, but I cannot pass the Welcome Screen to login.
View 1 Replies
View Related
Apr 30, 2014
Asus laptop Windows 8 stuck at Resetting PC 2%, Only option is hard reset??
This laptop belongs to my Grandma (87 years old). **She did not make the recovery disk for the computer.**
I got to the Recovery options and it has been stuck at 2% for about 6 hours. Asus OEM X55C Windows 8
NOTE: Yesterday I told Grandma I would see what was wrong, but it would bug out, freeze, etc when trying to log into the administrator. The screen would go totally black and then freeze. So, the computer has shut down improperly several times.
However, it did repair the disk last night before I attempted this recovery.
View 9 Replies
View Related
Feb 15, 2014
I brought my Toshiba laptop over to a friends house last night. We did some gaming, and everything was fine and acting normal. This morning, I packed up and when I got home, started up my laptop. A black screen with a window popped up with boot menu and app menu on it. Under the Boot Menu, there is Windows Boot Manager, and SATA:: TSSTcorp CDDVDW SU-B08AB. Under App Menu, There is Setup. The only thing I can enter is Setup, and there is a lot of things I don't understand.
View 6 Replies
View Related
Jan 22, 2014
My laptop is stuck on preparing automatic repair! I've tried shift+f8, I've tried them separately. Nothing is working! I have no windows 8 install disc. The only thing I have access to is the laptop. Can I in someway fix the laptop
View 2 Replies
View Related
Aug 16, 2014
I have a HP Pavillion Sleekbook 15-b002ee with Third generation core i5 processor 1.7 GHz, 500 GB Hard disk and 4 GB of RAM installed. Windows 8 came pre installed on it.
I bought this laptop 11 months ago and it worked fine for 10 months and then from the last month its presenting unusual problems. My disk usage is stuck at 100% and the laptop freezes and never lets me work or do anything. Heres what i have already done to solve the issue but have been unsuccessful:
1) I have reset my PC completely and reinstalled windows 8 using the factory setup. Didnt solve the issue, newly installed windows displays the disk usage 100% and the performance is same i.e the system freezes.
2) I have tried adjusting my paging file, no change made a difference to the performance of my laptop. The default system managed Paging file size is something around 3.89 Gb. Does my problem have anything to do with my paging file?
3) disabling the "Windows Search" and "Superfetch" services and still it didnt solve the problem.
4) I have also run checkdisk on my hard drive completely. It took me a complete day to do so but still no change.
5) Before resetting my laptop, an error called "Kernel_data_inpage(http.sys)" used to come on my upgraded windows 8.1. Whats the issue?
So what should i do? Is there any problem with my hardware? Is my hard drive having bad sectors and is that causing the problem?
View 1 Replies
View Related
Oct 1, 2014
I have a Gateway laptop running Win8. Just yesterday upon booting up, received a message below Gateway logo that it is Preparing Automatic Recovery. After this a dark blue screen and it seems to reboot and repeat.
From reading other users' dealings with this issue, I've read that the HDD might be going bad or already bad.
I've been able to click F2 repeatedly to get to the InsydeH20 Setup Utility screen, but am not sure what (if anything) should be done from here.
Also, if my HDD is bad, is it possible to recover any information off of it? I have a ton of pictures on it that will devastate my wife if they are gone forever.
View 1 Replies
View Related
Sep 2, 2014
[URL]
Computer was running slow so I did a reset of windows. It worked but the problem still existed. My computer froze so I turned my laptop off and back on only to find it stuck in that automatic repair loop. I tried system restore, no luck. I made that bootable usb for repairing and that didn't work either. Straight repair won't work either. I have tried every option and am completely lost as to how to proceed. I need the files off the hard drive but don't have a way to connect it to anything to be able to access the files.
View 11 Replies
View Related
May 23, 2014
I have an Asus laptop running on Windows 8 that starts up to the initial Asus logo for a minute and then restarts over and over. I've already tried pressing f8 and it does nothing so I cannot get anywhere to attempt to fix the problem.
Unfortunately I do not have the Windows disk so I'm looking for a solution outside of having to buy another one and wiping the hard drive to reinstall.
View 9 Replies
View Related
Aug 30, 2013
I just purchased a acer V7-482PG-6662 ( Acer | Aspire V7 | V7-482PG-6662 | Overview ) and it comes with a 1080p display but the issue is that it wont go above 1366 x 768. This is right out of the box, i cant change to a higher resolution and all the drivers have been updated.
The Nvidia card works fine as it kicks in during gaming but even in games I cannot select a higher resoloution than 1366 x 768.
I even did a fresh install of windows 8 and windows 7 same issue. Device manager indicates "generic pnp display" under the monitor heading.
Others who have bought the laptop have not experienced this issue and their display is at 1080p.
EDIT: Tried a linux live usb and same issue, the resolution is only 1366 x 768, is this a hardware defect?
View 9 Replies
View Related
Sep 17, 2014
My Lenovo G580 laptop won't start up. When I turn it on using the power button it goes straight to boot menu/app menu. There are various options there to choose from, but whichever one I choose, it keeps going back to boot menu. I've tried using the novo button, but it still doesn't work. Whatever I choose from the novo button screen, except "BIOS setup", keeps taking me back to the boot menu. My laptop won't start up.
View 9 Replies
View Related
Jan 12, 2014
Using samsung chronus 7 laptop : Windows 8.1 64 bit OS.
On start up get the samsung screen then a blue screen with a sad face saying pc needs to restart. Then goes in a continuous reboot.
I tried using the Windows 8 recovery cd. But get on the screen press any key to boot from cd. but press any key has no effect and goes back into loop as before.
Press f2 to get to bios reset defaults, no luck either, tried f10 just get boot up order, unable to find what keys boots into recovery mode, f8 does nothing no safemode.
Windows was preinstalled.
View 7 Replies
View Related
Jan 6, 2013
I have a asus k53s that i recently upgrade to Windows 8 (from w7). Sometimes when i leave the laptop on but don't use it(idle), the fan will be constantly on even if its not doing anything like running a virus scan, and the screen will also shutdown going completly black. I can't move the mouse or press keys to "wake" the computer and i have to reboot the computer by pressing the power button.
.I have everything updated with the latest drivers, so i really don't understand the reason for this.
View 6 Replies
View Related
Jun 16, 2014
I just totally lost the sound of my laptop running on Windows 8. It was okay yesterday and the only thing I did today was checked my email and noticed I kept getting full page of junk ads like your software is outdated, need to update whatever... etc. etc. I ran malwarebytes and avg and found nothing. I ran these also yesterday. Checked my connections ok, and volume not muted.... Where did the sound go? My laptop is only 6 months old.....
View 2 Replies
View Related
Jan 11, 2014
I purchased my HP laptop back in 2009. It came installed with Windows 7. It has an Intel quad-core processor and 8 gigs of RAM. I upgraded to Windows 8.1, and since then my laptop's fan has been running high and hot constantly. It did not behave this way before I upgraded the OS. The fan usually acts up when I have 2 or more things running on the laptop.
View 1 Replies
View Related
Mar 14, 2013
last night i did a factory reset and of course it took all night but in the morning when i checked it it was off so when i pressed the power button it appeared to be starting up a usual then suddenly the screen lust like faded to black but it was still on and this lust repeats itself the samsung logo comes up it appears to be loading then it all just goes black.
View 9 Replies
View Related
Jun 3, 2014
I have a Lenovo laptop running Windows 8.1. I run a number of VB6 programs. One is an estimating system that makes use of .dat files. When I first install the program and the files, everything works fine.
The problem comes when I 'over-write' a .dat file with a newer version, with some basic cost changes (the file updated on a different computer which contains VB6). As I 'paste' from a USB stick it asks if I want to over-write, which I obviously agree to.
However, as I run the program, I still appear to be using data from the previous file! The latest update figures are ignored.
To check this out further, I have even deleted (removed completely) the .dat file from the appropriate directory, but when running the program it still inputs data from the original file.
This leads me to believe there must be another copy of the file open somewhere (hence the phantom!), possibly as a 'last used' reference.
I have been on to the taskbar and ensured I have unchecked the two boxes about retaining files etc.
View 1 Replies
View Related
Jun 22, 2014
I have a laptop running Windows 8.1 and the start up has become very slow. Glary Utilities tells me it took 2m39s and only 1% of users are slower. I've tried cleaning it with CCleaner and Glary, removing unnecessary start up items and defragging.
View 1 Replies
View Related
Feb 2, 2013
I am using windows 8 on my laptop (samsung np550p5c-s03). The task manager shows memory usage around 70% (5.6 GB of 7.9 GB) even when I have no apps running.
View 4 Replies
View Related
Oct 14, 2013
Getting the limited connectivity problem when waking up my Toshiba laptop running 8.1. Having to reboot it every time I go to use it is getting old. Tried telling it not to shut off the wireless network car when going to sleep but that didn't seem to work.
View 3 Replies
View Related
Jul 1, 2014
I've got a new Windows 8.1 laptop, and I've been installing the usual suspects. Most of these work, but I have had trouble with two:
dropboxinstaller.exe
chromesetup.exe
With both of these, upon running I don't even get the warning asking whether I want to allow the file to modify my computer. All that happens is that the cursor flicks to the "waiting" blue circle for a second or two, then... nothing.
View 6 Replies
View Related
Jun 15, 2013
I have a Dell laptop running Windows 8. It is 3 months old.
I have lost my admin rights to the computer - I cannot make changes. Therefore, I cannot do a system restore.
I tried booting up in safe mode and turning on the admin rights via command prompt and typing "net user administrator /active:yes". It tell me 'access is denied'. I think it said "error code 5".
It may or may not be coincidence but I had installed Classic Shell a week before this problem occurred.
View 2 Replies
View Related
