My almost year old razer naga epic stopped working and just a little while ago was working perfectly. When I left and came back about 15 minutes later, it stopped working. I tried to use wired mode with/without a battery, I tried re-pairing wireless mode and,7 resetting my computer. I also tried other usb ports on my computer and another computer. Why it stopped working
View 1 RepliesI have windows 8 pro in my desktop.When i started to run nfs mw 1 it opened but while loading for gameplay it stops working and windows says that there is a problem to work the program properly,so i will have to close it.I have tried for all compatibility mode but its still does not work.
View 2 Replies View RelatedMy autoplay has stopped working on both my sd cards and my dvd drive - this happened in win 8 - and has remained even though I have upgraded to 8.1 - I have set the autoplay settings to ask every time - but still nothing pops up ? - I don't ever remember switching it off ?
View 6 Replies View RelatedIt now shows
audio ts
video ts
It never happened before. Also I got a boat of crap that I had to delete, and I hope I did not delete the wrong thing. I'm also getting these pop ups that keep popping up, and never had this happen before. and I also have these videos that pop up as well.
This evening I went to use by portable USB drive and noticed it wouldn't work. I tried another port and it still didn't work. I then tried another device on the same ports and it also did not work.
I opened up device manager and saw that my VIA USB xHCI controller was no longer listed under USB controllers. I turned on Show Hidden Devices and it then appeared as a hidden device. I attempted to re-install the drivers for it but the installer wouldn't run because it said it didn't detect the hardware on the system.
I last used the ports 2 nights ago and didn't have any problem then. I thought the problem may have been caused by the Windows updates I installed today so I uninstalled them all, but the USB controller still doesn't work.
System Info:
Gigabyte GA990FXA-UD3 motherboard
AMD FX-8350 CPU
16GB RAM
GeForce GTX 770 GPUs
Windows 8.1 Pro 64-bit OS
I have a Windows 8.1 Lenovo notebook and a Toshiba Satellite Windows 7 laptop, and a mouse.
Well, the mouse has been working fine for 4 months, but suddenly, the mouse has stopped working in my Toshiba laptop. As I didn't know how to fix it, and as Toshiba laptop was full of crap, I've just formatted its HDD and made a clean install of Windows 8.1 and updated everything.
After that, I've plugged the mouse in and the same error: it connects and disconnects all the time. Sometimes, if I'm in the Device Manager refreshing the devices, mysteriously it start to work, but just for a few minutes. Sometimes, and just sometimes, the Device Manager shows that there's an unknown device connected to a USB port that is not working. The error code is 43.
That mouse works perfectly in my other notebook, the lenovo. I've connected a different mouse to the Toshiba and it works perfectly, in any port. So that makes me say this:
-The mouse is not broken, cause it works in my other laptop
-Toshiba's USB ports work nice cause any other device I connect works seamlessly
-After a clean install, it can't be a software problem
I have a MacBook Pro running Windows 8 (via BootCamp) and I was running games on Steam.
Randomly, the game froze, and my Xbox 360 controller stopped responding. When I exited out to try and fix the problem, the trackpad stopped working completely and the whole thing froze.
Upon restart, the trackpad simply doesn't work (still doesn't) and I have to use a mouse to control it at all.
I reinstalled all of the BootCamp drivers, and it still doesn't work.
I've started getting the message Microsoft Mouse & Keyboard Center has Stopped Working (see error report below) when Windows 8 starts. I've tried uninstalling and re-installing the latest version of the Mouse & Keyboard Center but still have the same problem.
Problem signature:
Problem Event Name:APPCRASH
Application Name:itype.exe
Application Version:2.0.162.0
Application Timestamp:50934cc8
Fault Module Name:KERNELBASE.dll
[Code] .....
I got a new mouse a couple of days back, it's one of those fancy Razer mouses with 12 buttons on the side that is used for gaming and stuff. I have an issue when I try to use usb 3.0 instead of 2.0 ports. ( my tower only has like 2 2.0 ports so I try to use those for other things ) I am trying not to buy a usb hub before somebody says it
On games ( fullscreen or Windowed ) quickslot controls where you can use the numbers on your mouse I can't use the 3.0 port as it won't recognize the side buttons but it will on the 2.0 port.
I am guessing this is a driver problem but I am unsure. Neither the native mouse driver for Windows nor the fancy Cloud Synapse driver 2.0 works.
I own an hp pavilion sleekbook 15. Just out of the blue my mouse and touch pad stopped working after a restart. I download a new driver from the hp website, synaptic touch ps/2, installed it and still nothing. After several tries I don't know what to do anymore. I checked the device manager and nothing is installed, when I check the control panel it says reinstall.
View 9 Replies View RelatedI have a Sony Vaio running Windows 8.1 Pro. I was on cs portable with a USB mouse and I pressed a few keys and the mouse stopped to work. It came up with the message that it was not recognized. I tried to uninstall the USB drivers, but had no luck. This problem has been going on for a few days. I tried other solutions but they didn't seem to work. The red LED light was on.
View 9 Replies View RelatedI made the mistake of buying this mouse, and luckily I managed to avoid using the Synapse 2.0 software that they pushed via Windows Update at me when I plugged the mouse in.
However it still installed drivers and apparently the mouse uses this .dll called 'RzCoinstaller.dll', whatever that is.
I still have an old Logitech bluetooth mouse I was trying to replace with this mouse... however I am considering chucking out the Razer due to Razer's hardware and software being rather overpriced low quality garbage and I worry about the drivers effects on my computer given the datamining scare with Synapse 2.0.
I intend to possibly replace it with a Steelseries Sensei or a Corsair Vengance M95 mouse, but how do I uninstall the Razer mouse safely without affecting the Logitech mouse? Cause apparently if a mouse still uses one of the drivers it will leave that driver alone if you uninstall via Device Manager?
If I try and save anything in Documents, Pictures. Music or Videos I get the message : "Document .library-ms" is no longer working. It says I can delete these files - the files stored will not be affected . But I need these libraries to store stuff...
View 2 Replies View Relatedtoday I was makeing an essey in microsof office and suddenly my mouse and keyboard. stopped working, replugging the devices didn't worked (did it for 5 times ) , after this I tried to restart the pc I found out that rr button doesn't do anything , after I stopped the power going to pc and open power + pc they worked for only a few seconds and then stopped again . After a few force shutdown( by stopping the power) the pc closes itself after the windos 8 img dissapear . I have a desktop dual core 3.1, 4gb ram , mouse is usb and the keyboard is with Ps/2 .
Update : after waiting 30 min I reopend it, all worked , but after approximate 3 min pc shuted down by itself.
For some reason the Windows 7 style desktop snap has stopped working, I can still snap a metro app to the side of my monitor but not an ordinary program like note pad. I used to either drag the window to the side of the screen or press Windows Key and an arrow to snap it to the left or the right.
View 4 Replies View RelatedWhen I try clicking the start button, it doesn't work. I move my mouse to the right side of the screen, and the bar doesn't come up. Same with moving my mouse to the top left corner of the screen. I checked the properties by right clicking the task bar. The corner navigation options are checked off to show them when I move my mouse to the different corners.
View 4 Replies View RelatedAbout two weeks ago I began to notice strange behavior on my PC which made me think it may be a virus. Some examples:
1. When I'm online a message window frequently appears stating "internet explorer has stopped working"
2. Some websites do not display adverts on the page. I've attached a screenshot from youtube to illustrate what I'm referring to.
3. Some webpages will not load. I keep seeing "webpage under maintenance at this time". This is typical for websites at certain times but to see it every time I try to access is suspicious.
4. I use Hotmail and typically the first time I start it up in the day I notice that the first email I open causes the entire page to go blank as if it erases everything on it, it then reopens with all of my emails listed and finally the email I began to read will reopen. This only happens after I boot my system and open the first email. This will not happen on any other computer.
5. I seem to be having issues installing certain programs. They won't install citing various reasons such as outdated files, incompatible etc. These were all working flawlessly prior to reformatting my system.
6. I'm unable to post messages even though I'm logged in. When I type a message I see the timer cycling but it never posts my messages, it's as if it's stuck in a loop or frozen.
Having felt that a system reformat was in order I did just that not more than a week ago. Everything was reinstalled and updated. Once all the Windows 8 files were installed I began to notice the exact same problems surfacing immediately. I'm currently using Win 8 with IE 10. 16 GB RAM, 64 bit OS. The computer itself is an HP and a year old.
Recently I updated my laptop and when it was finished updating the keyboard no longer worked. Before the update it worked fine and I had no problems. I restarted it several times and restored it but still nothing. Now I am stuck using the on screen keyboard which is difficult. I also went to try and fix it using device manager but it wasn't listed.
View 9 Replies View RelatedSince the last Windows updates a couple of days, I frequently get "OneDrive has stopped working" messages.
Running Win 8.1 with Update 1 and all available updates.
Tried to use the picture password and nothing happens....just sits there. Even tried to change the pic and got an enrollment failure error....
View 1 Replies View RelatedWindows has become unstable. The action center put up a flag that says "Firmware Linkage Driver has stopped working." My computer is a Toshiba C655-S5132. Upgraded to Win8 64 bit several months ago.
View 1 Replies View RelatedI was trying to adjust my recording volume settings and realised that I couldn't access them at all. I can access volume mixer, recording devices and playback devices but as soon as I click properties I get an error "windows shell common dll has stopped working" checking for solutions. No solutions are found.
In the event log I have this:
---------------------------
Log Name: Application
Source: Application Error
Date: 24/12/2013 14:45:38
Event ID: 1000
Task Category: (100)
Level: Error
[Code] .....
I have updated the sound drivers and this does not solve the issue.
I have run sfc /scannow and get this error: Windows Resources Protection found corrupt files but was unable to fix some of them. I checked the CBS.log and mmsys.cpl is in the log:
2013-12-24 15:52:11, Info
CSI 000002cc Hashes for file member SystemRootWinSxSamd64_microsoft-windows-mmsys_31bf3856ad364e35_6.3.9600.16384_none_4f2e2a4bb3222341mmsys.cpl do not match actual file [l:18{9}]"mmsys.cpl" :
[Code] ......
There are also lots of other files with errors. I think this was caused by my faulty SSD and when I re-imaged back to my new drive, these errors are still present.
Do I need to re-install windows or can I repair install without losing my profile and data? I'd rather repair than re-install.
We purchased 15 Surface Pro 2 tablets for our School Administrators. Touch did not work for 3 tablet 'out of the box'...or so I thought. Since receiving them, touch has stopped working on 5 more. Each time Microsoft has replaced the device without question so I assumed this was a known issue. However I am now pretty sure it is happening during my imaging process. I am using SCCM 2012, via PXE and/or USB. The Task Sequence completes successfully and all drivers appear to install. I am using the driver package from Microsoft. The stylus works but not touch. I can't complain about the support MS is providing since they replace the device every time but I am sure there must be a fix I have not tried.
View 6 Replies View RelatedI have Windows 8, 64-bit, IE 10 (uses 32-bit) and am using the free version of AVG anti-virus. I noticed that IE will crash (IE has stopped working and needs to restart) on a daily basis. I am using an HP laptop G62-340US. I have IE set to update automatically.
View 2 Replies View RelatedI am experiencing some minor issues with my Graphics Card. Let me say first that this is an old graphics card, which was however updated to Windows 8. Today, when I updated the computer to 8.1, I came across a "Outdated Driver" error.
On this computer, I have a ATI (AMD) Radeon 2400HD Graphics. I did do a DxDiag and it is available here.
Just the other day i was having problems with the Temporary profile problem, but by the end of the day i finally fixed it. But i also deleted my user account so i found this program that will restore deleted data, it was in trial mode so i only allowed me to download 1 Gb so i got what I thought was the most important like App data, contacts, desktop, documents, KAG, and all of the little files at the end of the screen.
I put all of the things in my account once the problem was fixed. Then every time i open my windows explorer and i try to open anything it says that windows explorer has crashed and then it restarts.
when i formatted my inspiron 15r the three buttons on the top right corner has stopped working.
View 1 Replies View RelatedI purchased a new laptop with Windows 8 about a month ago. SyncUP was included in the software. When I open any of my pictures I receive the message, "SyncUp has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I want to use this program, What do I do now?
View 1 Replies View RelatedToday I just installed Windows 8 enterprise from Windows 7 Home Premium, I had to make a clean install because they didnt let me do the upgrade from Win7 Home premium.
When I ended installing Windows 8, I checked the device manager, and showed me that AMD Radeon HD 6800M was not working.
My video card is an AMD Radeon HD 6870M.
All my system information can be found here: file:///F:/System%20Information.html
Have a 32" HD TV which I use as my Primary Monitor(connected using HDMI) and a Lenova 17" as a Secondary (connected with vga cable). I shut the desktop down, unplugged the 17" to use on another pc. When I reconnect the 17" to my main desktop it now does not pick up
View 2 Replies View RelatedI installed Classic Shell on my Windows 8.1 laptop and i kinda didn't like it too much so i uninstalled it. But it hasn't uninstalled completely, when i try running setup again, and choosing the 'remove' option it doesn't uninstall! Anyways, that isn't really the problem, the thing is, when i press 'ctrl alt del', it doesn't go to task manager, i tried right clicking on the start icon and clicking on task manager but that didn't work either, so i had to go to start menu and search for task manager and then finally it came up.
I'm wondering if there is any correlation between classic shell and 'ctrl al del' not working, any way of getting it to work again.