I have an xps 8500 and it won't update to windows 8.1 from the store. I have tried uninstalling and reinstalling the update KB2871389 and nothing happens. . I am also running in administrator mode while I am doing this and the windows troubleshooter says something about admin privileges.
I have had Windows 8 for approx 1 year and just upgraded to Windows 8.1 last week.
I installed bitdefender total security at the same time and everything was fine for a few days until one morning I woke up my Laptop to find I couldnt open a software program. Further investigation has found that I can not alter anything on my machine.
I have only the one user account which has my name, email, Administrator and password protected showing.
I can use my laptop still but have no admin rights at all.
When i try to open command prompt (admin) it takes a few minutes to come back with an error saying cannot access specified path, file folder etc...
I cant even restore my system back to factory settings. How can I restore my factory settings from this point??
I've tried for several days after several reboots, etc. I am running a Dell OEM version of Windows 8 on an Optiplex. It just sits at "Downloading" and when I hover over it it says "0% complete". Apparently I can't use the ISO because I need a key which the OEM version does not have. how I can get this thing to update?
I just purchased an XPS 8500 with Windows 8 (NOT Pro). I want to use a 120GB SSD drive as the boot drive. I tried using the Dell Backup & Restore function to put the system image on the SSD.
However, the HDD that came with the PC is 2TB. When I go to install the image on the SSD, I get an error message that the SSD is too small.
Do I need to (order and then) use a Windows 8 install disk?
I have a brand new Dell XPS 8500 with Windows 8. I did my initial software load and wanted to create a system image. The image fails with error code 0x80780119. This is the sequence I ran:
1) Control Panel
2) Windows 7 File Recovery
3) Create a system image
4) On a hard disk (External hard drive selected with 1.36 TB free space)
5) Program states that the following drives will be backed up without allowing me to add or remove drives (EFI System Partition, OS(C:)(System, and WINRETOOLS(System). I hit "start backup"
6) Create a system image box opens and it starts to run the process and then errors out and says the backup failed. The error message says there is not enough disk space to create the volume shadow copy on the storage location and it lists error code 0x80780119.
I believe it's not a problem with the destination drive where the final system image will be created. It has to be a problem with one of the partitions on the one and only hard drive inside the machine. Using Disk Management I can see the following partitions on the harddrive:
Just bought this new XPS 8500 great computer. However, trying to learn the new Windows 8 and Internet Explorer 10 is an experience. Am unable to see all the favorites and realize maybe I should organize them better. Therefore, how would you setup a folder(s) to better organize favorites. I tried to follow the directions by going to Windows website and they state that you click on the add to Favorites and an option related to a folder shows up. However, I only see the option to add to Favorites or to pin to start.
Brand new Dell 8500 XPS running Win 8 64 bit with IE 10. I transferred my favorites from my Win VISTA machine using Easy Transfer which caused the lost of many IE Fav Icons. Sometimes when I click on a favorite the icon will show up and some won't even though they are present on my Win VISTA machine.
Is there away to restore those Fav Icons which are supposed to be there? I realize all websites don't support the Fav Icons.
I just bought this Dell XPS 8500 with Win 8 on it and although I'm not that happy with this OS I guess there is a learning curve so I'll try for awhile.
For some reason, after I had uninstalled Mcafee from the start up screen and also added a few items to the startup screen, when I reboot or do a cold boot, instead of getting the startup screen, I am getting the desktop along with about 5 disk partitions and a couple programs that I installed. While this is not bad since I can just "x" out of them, it's irritating and wonder how I can fix this. I would like to ultimately just boot up to the desktop if possible without anything else opening up.
My brand new XPS 8500 with WIndows 8 has an intermittent blackscreen. Only way to get past it is to power down and power up the PC. Using a Dell 23" monitor. Since machine and monitor are brand new, I will contact Dell tomorrow to return. I don't relish resolving an intermittent problem over the phone with India support. I have searched these forums for blackscreen topics and there are several but no definitive solution.
I recently bought a Dell XPS 8500 with Windows 8 on it. I did a clean install of Windows 7 on that machine and would like to use the Windows 8 OEM license on it on my Dell Inspiron 17r SE laptop.
I tried typing in my key to do a clean install on the laptop but I got this error message:
The product key entered does not match any of the Windows images available for installation. Enter a different product key.
I bought these machines and therefore paid for the software, I should be able to install them on any machine I want. All of my machines are Dell, why can't I do this? What's going on?
Cannot create a Restore Point. I try thru Control Panel -> System and Security -> System -> System Protection.
No available drives show under Protection Settings.
When I try to launch thru System Config -> System Restore, a pop-up tells me Starting System restore, but that just hangs there forever. I have to stop it in Task Manager.
I have tried sfc - no reported problems.
Malwarebytes Pro and anti-virus report no problems.
I am having trouble reinstalling windows 8 on my Dell XPS 8500. Since installing a new SSD and having reset the BIOS using a jumper, my copy of Windows 8 will no longer detect my product key that i assume is embedded in the BIOS.
What is the procedure for walking in a unit to Dell Canada for repair? How do I protect my confidential data? Will Dell repair my two month old machine if i walk in without their OEM hard drive?? I hope to they do. What if it were stolen? I don't care about the cost and don't want anything for free, I just want to get my system working so I can rebuild it. I am only on an iPad.
I have a Dell XPS 8500 win 8.1. I recently installed Linux Mint 17 on an external HD which booted from GRUB. I now removed Mint 17 ok but I'm left with a reference to 'UBUNTU' in my bootloader. I'm unable to remove this reference. this reference to UBUNTU prevents me from booting from a LINUX USB. I think I need to repair the bootloader but can't and I have tried all sorts of.....FIXBOOT, FIXMBR. etc.
I just got an XPS 8500 with 64-bit Win 8 (non-Pro). I'd like to load a lot of XP apps from my ancient machine. Is there a way to load/run them? I've heard of HYPER-V, but it only runs on Win 8 Pro. There may be other solutions, but I don't know which to choose. I'd like to feel comfortable that whatever it is will work. If the answer is No, should I go to 32-bit Win 7 or 8 (and would THEY work?) or some other answer?
I am trying to upgrade an xps 8500 to windows 8 pro. It's an i7 system with 16 gig RAM. It was running windows 7 64 bit.
I made the first upgrade. It seemed to work fine. I updated drivers but when I attempted to add the windows media center the system failed -- on reboot it indicated the update could not be made and the previous version of windows 8 pro had been restored. I tried again, and this time it indicated that there were corrupted files and the system could no longer boot (error was 0xc000021a). It was not able to fix the disk issue automatically.
With Microsoft support I created a windows 8 pro boot drive on USB. At first the software would not even recognize a drive on which to install the operating system. That was resolved, and I was able to install windows 8 pro. But now every time I restart, the system goes back to the original problem (corrupt files), meaning I have to reinstall windows 8 pro, and so on. I have formatted the HDD as part of the installs: Partition 3 of Drive 0 (the other partitions are: Drive 0 partition 1 (1 meg used) OEM (reserved), partition 2 recovery (8.2 meg used) and drive 1 29.8 meg unallocated.
Windows installs updates (22 in number) automatically on restart, and these may be the source of the problem.
I have checked the drivers. They all seem up-to-date. The Bios is A09 (I think, in any case it is the latest version).
I have a XPS 8500 with preinstalled windows 8. I tried to install Ubuntu 12.10 on it. When I partitioned the disk, I accidentally format the whole disk. Then I could not restart to Windows 8. I didn't make any backup or recovery media. How to restore factory image?
I'm trying to run the Dell Backup and Recovery application on a new windows 8 xps 8500. Unfortunately all the tile labels are only showing IDS tags eg: IDS_DS_022,IDS_DS_003 and when I click on a tile the subsequent window is also full of different IDS tags. I've tried reinstalling the app but no change.
Ever since I installed Windows 8 (and now Windows 8.1 Pro Preview Build 9431), I hear occasional buzzing sounds while playing .mp3 files on my desktop computer (Dell XPS 8500). This occurs using both iTunes and Winamp. The .mp3 files play fine on other devices, such as my iPod. This makes me suspect that this is a Windows problem.
I've been trying a couple of times to upgrade from 8 to 8.1 but every time I try to upgrade it via the STORE, it says that I dont have admin rights even though im the admin. I checked other sites and it says that I need to uninstall a certain file but the file is not present in my laptop.
I only had one account on my Windows 8.1 Pro Update 1 x64 computer. Then I messed it up when I changed rights. Now the computer boots up and I can log in but as a user.
Most of the suggestions I read require admin rights which I no longer have. I can't create a new account or edit the built-in admin account but I keep getting the error 5.
So Should I try to boot in safe mode with DOS prompt and hopefully admin rights?
Would a system restore work? I do have recent restore points but will I be able to restore if I am not the administrator?
I am asking all of this because I am not in front of my computer at this moment... I had to leave on a business trip so I will attempt repairs when I get back home.
Worst case scenario will require me to start from scratch, which I am trying to avoid.
I want to upgrade a computer from Windows 8 to 8.1 but I have a very low download allocation (2GB/month) at that computer. I would like to download the upgrade on another computer (a Mac) that has a much higher download allowance and then transfer that to the computer I need to update. Is this at all possible?
I've been trying to download windows update on a fresh install of windows 8 pro with different dvds like Windows 8 Pro With media center & without media center{With & without activating it}. But every time I tried downloading it I get "Code 8024402F Windows update ran into a problem". I've checked my internet connection which is ok, I've tried downloading it with Windows defender, Windows firewall and Windows smart screen off but to of no avail
I am on a limited speed line and Windows 8.1 has started to download the update. I now find that is it is some 3G in size and that will take days. How can I stop the download?
How can I stop the download of Windows 8.1?
Effectively I cannot do any online work until I can stop the download hogging the limited bandwidth.
I have check for updates set to Never. Occasionally I manually check for updates. Thing is, after 10 minutes I get the same 40 important and 2 optional update descriptions. Is there some way to set the high water mark so that I only get new notices without installing any updates? It's not exactly intuitive.
Is it possible to download win8 update packages to install from USB?
I have many machines all trying to update at the same time over wifi and takes hours just for the check to finish and many many hours for the updates... I figured if I could download a batch to USB, copy to few USB sticks then pop them on?