resume configuration restart computer" i have more than enough to install this is a clean install on a 60 gig PATA HD. my pc is a P5N-E SLI asus MB.. 8800gt 512 MB video card. 2 gig pc6400 ram.. and theprocessor is e6850 dual core. so what gives?? i get no other info other than listed and when i reboot i get the same message?
View 9 Replies
I ordered a refurbished/reconditioned Packard Bell EasyNote TJ74 laptop from a very well known retailer in the UK called Currys. I received it two days ago. Initally, the laptop stayed on for all of about 5 seconds before shutting down, however I have solved that problem by Googling the text and looking here: pxe-e61:media test failure check cable. It was basically trying to boot from something other than the HDD itself, so I set the HDD to the top of the list in the BIOS.Then, the next problem I got was this: I get the "Windows is Starting..." screen, and then a setup services starting message, and then this:"Windows could not finish configuring the system. To attempt to resume configuration, restart the computer."I restart the computer and... nothing happens. No Windows installation/recovery disk came with the laptop.So, I set the laptop to boot from CD in the BIOS and, using a 64-bit edition recovery disc I found online and ran startup repair using it, apparently no problems were found, and I got a message about ensuring I didn't have any cameras etc. attached... ..Someone online recommended I disable digital driver signing, so I did that by pressing F8 at one point when it was booting... it doesn't seem to have made any difference. Safe mode doesn't work either.Currys have told me they can do nothing but send a courier to my house to pick up the laptop... I don't get a replacement, simply a refund. I needed this laptop for Monday as I start university.I've set it back to boot from HDD and I'm getting the "Windows could not finish configuring the system, please restart" message again and again and again, and the system just constantly restarts and the same message appears. It is a never-ending loop!
View 4 Replies View Relatedmessage after Sysprep stating "Sysprep Fails After Deployment With: Windows could not finish configuring the system."This is a new out-of-box Lenovo T530 laptop, it came pre-loaded with Windows 7 Pro.I pulled laptop from box and inserted our Windows 7 Pro SP 1 disk and installed our copy. I then configured all settings and applications under "audit mode", created an "Unattend.xml" file using the WSIM, and copied that file into the Sysprep folder and ran "Sysprep /shutdown /oobe /generalize /unattend:unattend.xml" The error message appears after I image drive using Ghost GSS 11.5.1.2266. (I'm assuming the error would appear after boot-up regardless of imaging the machine)I have read numerous articles regarding this error and have also disabled the "Windows Media Player Network Sharing Service" as suggested by many. I'm also assuming that the "Hotfix" for this issue does not apply since I am installing SP1.I am able to boot into the machine after attempting to boot into "safe mode" first (as suggested by many users), however once in, it looks as if the XML file is completely ignored.
View 5 Replies View RelatedGetting the message after Sysprep stating "Sysprep Fails After Deployment With: Windows could not finish configuring the system...."This is a new out-of-box Lenovo T530 laptop, it came pre-loaded with Windows 7 Pro.I pulled laptop from box and inserted our Windows 7 Pro SP 1 disk and installed our copy. I then configured all settings and applications under "audit mode", created an "Unattend.xml" file using the WSIM, and copied that file into the Sysprep folder and ran "Sysprep /shutdown /oobe /generalize /unattend:unattend.xml"The error message appears after I image drive using Ghost GSS 11.5.1.2266. (I'm assuming the error would appear after boot-up regardless of imaging the machine)I have read numerous articles regarding this error and have also disabled the "Windows Media Player Network Sharing Service" as suggested by many. I'm also assuming that the "Hotfix" for this issue does not apply since I am installing SP1.I am able to boot into the machine after attempting to boot into "safe mode" first (as suggested by many users), however once in, it looks as if the XML file is completely ignored.
View 2 Replies View RelatedDuring a full system restore of my computer i didn't realize it was not charging and left it to finish the restore. Shortly coming back later, it had died so i rebooted it. During the reboot, it did its normal process well restoring," Setup is starting services.", but then during the process when gathering windows data to restore the computer in its final stages, it gives me the message" Windows could not finish configuring the system. To attempt to resume configuration, restart the computer." Shortly after starting my computer, going through the same process, it gives me that message again, and then it repeats, and eventually of course, goes into a circle of completing the same issue.
View 2 Replies View RelatedSo I created an image earlier this week, sysprepped it and captured it after restarting the computer.Settings were OOBE / Generalize / Restart.When the computer had finished capturing the image to deploy studio, it restarted and went through the normal 'first run' procedures, but stopped during the configuration process saying:"Windows could not finish configuring your system. Restart the computer to try again" or something similar.I had a look at an earlier thread on here but the answer was similar to 'If you sysprep more than 3 times now it won't work'.
View 2 Replies View RelatedI am trying to put microsoft office 2007 on my laptop rumming windows 7 pro. I have the files on the computer but when i try to open word, excel, powerpoint etc, it says the operation system is not configured to run them
View 4 Replies View RelatedMy Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
View 15 Replies View RelatedI'm running Windows 7, 64-bit on an Intel Corei32100T processor on a Gigabyte H67A motherboard with 8gb ram, connected via HDMI to a Sony Bravia. No sound or video card as its all on the processor. I want to set up the system to record a line-in source for (1) my turntable and mixer, and (2) interface for my guitar and microphone. My device manager shows both Intel(R) display audio and Realtek HD audio. Clicking on the speaker icon in the notification area brings up the Intel display audio mixer with three sources, the Sony, system sounds and Firefox. I'm sure this is controlling the system audio output. No way to a recording mixer. Bringing up the Realtek audio manager still shows me no way to set recording levels. Since I'm planning to use the pc for recording LP to disc (on my second thousand, now, switching from favorite old programs on an XP machine to the newly built system)and for live recording, properly setting up the basic sound paths in the system before setting up Audacity and Artist One from Presonus.
View 5 Replies View RelatedI have just recovered my laptop toshiba satellite L505 es5018 windows 7 home premium 64bit to factory settings successfully. After that system start up but keep configuring system continuously. How may I solve this problem?.
View 4 Replies View RelatedI have just up graded the ram on my PC and Installed Windows 7 on a second hard drive. During install Windows would not finish installation. After two days of tearing my hair out I started stripping everything off the PC leaving only the bare essentials for running. This included removing one of the two sticks of Ram. Win 7 installed and is working perfect, duel booting with XP on two HDD's.The problem, put the second stick of Ram back in XP boots and runs perfectly but reboot to windows 7 and it freezes on the startup screen. Take it back out and it works no problem.
View 2 Replies View RelatedCant get Windows 7 64 Bit to finish its installation.Gets to the first reboot.Thats as far as it gets.It wont finalize the installation.From there it goes into a reboot loop every 30 sec.Reboots into the Safe Screen window.None of the functions in the window work.Did a Custom Install from the DVD several times.No luck.Windows 7 32 Bit installed and ran fine.Did a repair from the DVD as well.Solved nothing.Asus P5W DH Deluxe (MB)Core 2 Quad CPU (Q9400@2.66 GHz)ATI X1600 Pro Video cardSound Blaster Sound CardRam 4GB
View 6 Replies View RelatedWhen I try to install win 7 64bit it won't complete the install. The screen is blank and it will stay that way for over an hour. I have read many post on this site about that problem and have tried many of the answers that were given (only having one drive connected, using only one stick of ram etc). but it still will not install all the way to where you name the computer and put in a password. When I reconnect the other drives and boot into my win 7 32bit os and go to computer and check the drive that I was trying to install the 64 bit os the files are there. Of course under users there is only Administrator, default and public. I have tried 3 different install disk that I borrowed from other people and the same thing happens.
View 9 Replies View RelatedUsing any browser starts the online connection, etc. then seems to stop though it still shows it trying to connect to the requested website. Tried, on IE9, Chrome and Opera, it jsut seems to stop or spin it wheels.The odd thing is updates either by MS own or pgm. updates seem to go through provided on their own update procedure, like AV or pgm. update. The last update was .Net one, is that possible causing issues.Anyways, I maybe forced to return to some restore point, if no solution is found. I understand SP1 can cause some problems, but haven't heard of this. Seems odd is I can still update with MS update service(auto).
View 2 Replies View RelatedI was trying to format my computer, I had installed the OS of Windows 7 Ultimate x32 bit, and decided to take the opportunity to install a new one, but this time of x64 bits, this was my first time formatting my computer but apparently didnt finish good.
1: When first restart the computer to finish installing the OS, it Said That "The intallation of windows could not be completed. To finish installing Windows, restart the installation"
2: I try to do what it say, but when I try to restart the installation with the OS disk in, I get to the same window (not sure if that's what meant by what I just explained).
3: When I turn on my computer says something like: "select the operating system you want to use", and I get the "Windows 7" option twice.
I just found out according to format the computer i had to delete the partition that was the old OS and create a new one, but I cant get to that window, because as explained in section 2 always get the same message from section 1.
I've updated every time windows has told me to, and I haven't had any problems and they usually finish really quick, but this time it's stuck on the start up screen and just says something along the lines of "update 20 of 76 don't turn off the power or unplug" but it's been installing update 20 for 3 hours so I turned it off. Well actually I took the battery out because pushing the power button did nothing. Probably not the smartest thing to do but I was desperate. Even after it turned off, it just resumed the update. I can't do ANYTHING while it's updating, and I don't even know if I downloaded this update because I remember seeing a tray icon that said "downloading updates: 0%" not long ago.
View 3 Replies View RelatedMy friend wanted a faster router for her new computer and she's using Ethernet now, but she is having hangups during the registration of both her new D-Link router, and her new Dazzle card that she is installing for direct TV purposes. She has Internet through her old router, Linksys, but she says it's too slow, so she got the new one. But in both cases, she hasn't been able to complete the registration process with either new item. It kicks her out after the first page, she says. She has windows 7 on a brand new, fast computer. She has viper as a virus protection. Someone else was trying to help her recently. She does not know where to start to find the problem. She fears this person may have inadvertently locked her out of completing the process, or.
View 5 Replies View RelatedI am using windows 7 home premium. If I use one login name and password in explorer it remeber automatically and did not even ask before login next time
View 1 Replies View RelatedTrying to update manually today and keep getting a loop of blue screen death appears always at 32% of the configuring updates when re-starting up no matter how many updates are selected, which is about 40?? (100Mb)
Can get round it by running safe mode w/networking then it takes 2 cycles to remove the previous updates, I can then use as normal.
The Windows 7 Firewall provides a basic level of protection against hackers as soon as you start your computer up. Although the firewall can be configured to filter both incoming and outgoing traffic, by default it only acts like the firewalls in Windows XP and Windows Vista, that is, it will only filter incoming connections. Configuring the Windows 7 Firewall to filter outgoing traffic is a little easier than it was in Windows Vista but is still a complex process and is not covered in this tutorial.
This video tutorial demonstrates the most common configuration options for the Windows 7 Firewall and discusses when you might need to use them. If you need to turn off the Windows Firewall for any reason, the video will also show you how to do that. Finally, we'll also show you how to access the advanced options for the firewall, although these options are not covered in this tutorial.
Last night while bring windows 7 home premium down it indicate 16 upgrades. The system appears to load the upgrades and the computer shut down. This morning I turned on the computer and I get to the screen "Preparing to configure Windows. Do not turn off your computer." It has been stuck here for over an hour. How long do I let it go before I turn it off?
View 3 Replies View RelatedDue to some problems I was having with updating windows, I decided to recover my HP computer to its factory condition using HP's Recovery Manager.I don't have a recovery disk, so I chose to recover from the recovery partition on the hard drive. I chose to not do a backup and the recovering process went fine. After it was done, I was asked to restart my pc and once it restarted, I was at a black screen which said something along the lines of "setting up devices". After a couple of minutes, a small window showed up with the fallowing message:"Windows setup could not configure windows to run on this computer's hardware." This window shows up when the black screen says "Setting up devices". I press ok, then the black screen says "setup will continue once your computer is restarted". The pc is restarted automatically and this window shows up again.At first, I had unplugged an external USB hard drive and an external wifi antenna, leaving my monitor, mouse, and keyboard plugged. But, after doing some research, I found that some hardware installed inside the pc might also be causing the problem. So, I removed the wireless card, disconnected the DVD drive, and disconnected the cable from the USB and analog ports of the front panel. The only things that were connected (as far as I saw), were the fans, motherboard, power button, and the only hard drive. I went back into the recovery manager and did the recovery again, once it was done and the pc restarted, I was brought back to the same message.
View 2 Replies View RelatedRecently bought a 2tb storage drive and I'm using all 6 sata ports on my mainboard! I've got a 74gb raptor that's got windows xp dual boot with my main os windows 7 though windows 7 is on another drive! I want to remove the dual boot as I don't need windows xp anymore (do I?) the thing is the raptor is my first boot device that gives me the option to boot into windows 7 or xp and if I select the windows 7 as my first device it just comes up with the error can't find boot device so there must be a config file on the raptor 74gb that I need to move to allow me to boot from the windows 7 drive and remove the raptor to use my new drive! Any advice on how I can do this as any software that I could use?
View 6 Replies View RelatedMy computer will not let me connect to the internet using a wireless connection. My router and modem are working. I can connect to wireless using another computer. How do I reset my configuration back to factory settings?
View 2 Replies View RelatedI ran the lastest Windows updates on my PC and when it rebooted it was stuck on the "Configuring Windows do Not Shut Down" screen for hours. Finally, I shut down and the PC would not start up. I tried to do a system restore to before the Windows update, and got errors. However, the PC did start up (and actually said the restore worked), but not everything is functioning correctly on the PC (there is no HDMI sound for example and Google Chrome Updater will not connect to the internet). I tried to do another system restore from within Windows and got the error message in the attached screen shot.
View 2 Replies View RelatedI am configuring Windows updates and it has been 7 hours and it is still on stage 1 30%,
View 4 Replies View RelatedI have been onto the Microsoft support page and followed various "cures" all to no avail. I have been into control panel and gone through the windows troubleshooting advice and it tells me that it has found and fixed problems with my Windows update and installed 9 updates. When I click to restart I get the same failure message at startup.It seems to recycle the startup procedure 3 times before it eventually gets to my desktop page, and when I look ar my update history there is a long list of failed installations.
View 10 Replies View Relatedi need to know where all the settings are that might shutdown/power off my PC.Already i have found and changed:
settings that power down my wireless network usb and harddrive - off
ability to power off all usb ports - off
sleep mode - off
i have made max remote access 30days. what are some other settings that may suspend or logoff or power off my pc and stop it from downloading?
I use the latest version of firefox and use Dodo wireless broadband and I can never get beyond 98% of a download, it's very frustrating when certain programs have to be updated to even run. According to dodo's signal charts I should be in the best location for their signals and when I contact them they refuse to take any responsibility for it. I wasted countless gigs on downloads that just won't finish. Is there anything I can do to make the downloads finish? I've tried disabling my anti virus, firewalls, tried using IE8, NOTHING WORKS!
View 1 Replies View RelatedI have 2 ssd's raid-0 and 2 hdd's raid-1 connected to the ich10r. Both have or I should say had windows 7 installed. I want a back up windows on the hdd's. All was good until I decided I wanted the hdd's connected to the Marvell controller so that the sdd's and hdd's are on separate chips.I have been trying to get windows 7 to reinstall to the hdd's now connected to the Marvell 9128 all day. It won't finish the install. It goes all the way through to the last step, reboots and I get: (File:BootBCD. Status: 0xc0000225)
View 5 Replies View Relatedwindows starts to dl everything and restarts a couple of times but dont go to desktop setting u for the first time?
View 3 Replies View Related
