New Install Won't Finish?
Oct 26, 2010
I have 2 ssd's raid-0 and 2 hdd's raid-1 connected to the ich10r. Both have or I should say had windows 7 installed. I want a back up windows on the hdd's. All was good until I decided I wanted the hdd's connected to the Marvell controller so that the sdd's and hdd's are on separate chips.I have been trying to get windows 7 to reinstall to the hdd's now connected to the Marvell 9128 all day. It won't finish the install. It goes all the way through to the last step, reboots and I get: (File:BootBCD. Status: 0xc0000225)
View 5 Replies
ADVERTISEMENT
Jan 1, 2011
I have just up graded the ram on my PC and Installed Windows 7 on a second hard drive. During install Windows would not finish installation. After two days of tearing my hair out I started stripping everything off the PC leaving only the bare essentials for running. This included removing one of the two sticks of Ram. Win 7 installed and is working perfect, duel booting with XP on two HDD's.The problem, put the second stick of Ram back in XP boots and runs perfectly but reboot to windows 7 and it freezes on the startup screen. Take it back out and it works no problem.
View 2 Replies
View Related
May 4, 2011
I use the latest version of firefox and use Dodo wireless broadband and I can never get beyond 98% of a download, it's very frustrating when certain programs have to be updated to even run. According to dodo's signal charts I should be in the best location for their signals and when I contact them they refuse to take any responsibility for it. I wasted countless gigs on downloads that just won't finish. Is there anything I can do to make the downloads finish? I've tried disabling my anti virus, firewalls, tried using IE8, NOTHING WORKS!
View 1 Replies
View Related
Jun 14, 2011
windows starts to dl everything and restarts a couple of times but dont go to desktop setting u for the first time?
View 3 Replies
View Related
May 12, 2011
I'm having an issue with updating my system. My computer installed some updates and wanted me to restart to fully update the system. When I turn the computer on now it shows it's updating (it never progresses past zero) and it doesn't finish the update. Now every single time I go to start my computer it constantly has to try and finish these updates. The computer will sit there for a good few minutes trying. I have no idea what the updates were.
View 2 Replies
View Related
Jan 14, 2009
resume configuration restart computer" i have more than enough to install this is a clean install on a 60 gig PATA HD. my pc is a P5N-E SLI asus MB.. 8800gt 512 MB video card. 2 gig pc6400 ram.. and theprocessor is e6850 dual core. so what gives?? i get no other info other than listed and when i reboot i get the same message?
View 9 Replies
View Related
Feb 24, 2011
Cant get Windows 7 64 Bit to finish its installation.Gets to the first reboot.Thats as far as it gets.It wont finalize the installation.From there it goes into a reboot loop every 30 sec.Reboots into the Safe Screen window.None of the functions in the window work.Did a Custom Install from the DVD several times.No luck.Windows 7 32 Bit installed and ran fine.Did a repair from the DVD as well.Solved nothing.Asus P5W DH Deluxe (MB)Core 2 Quad CPU (Q9400@2.66 GHz)ATI X1600 Pro Video cardSound Blaster Sound CardRam 4GB
View 6 Replies
View Related
Mar 20, 2012
So I created an image earlier this week, sysprepped it and captured it after restarting the computer.Settings were OOBE / Generalize / Restart.When the computer had finished capturing the image to deploy studio, it restarted and went through the normal 'first run' procedures, but stopped during the configuration process saying:"Windows could not finish configuring your system. Restart the computer to try again" or something similar.I had a look at an earlier thread on here but the answer was similar to 'If you sysprep more than 3 times now it won't work'.
View 2 Replies
View Related
Jun 26, 2012
So, is this the typical UBI Shoddy, unoptimized, buggy Game or have they finally turned the corner? Bwahahahahaha... sorry, couldn't finish the sentence w/o busting a gut laughing eriously though, aside from the Third Person View (that I hate with a passion because it makes moving so cumbersome), has anybody played the campaign yet?
View 9 Replies
View Related
Nov 26, 2009
im using microsoft visual c# program under windows 7.
my generated application use in cmd screen but this programs just open and close fastly. i dont freeze commnet line end of my programs. that reason i didn't see my programs results.
how can i freeze cmd screen end of the program finish?
View 1 Replies
View Related
May 7, 2012
When I try to install win 7 64bit it won't complete the install. The screen is blank and it will stay that way for over an hour. I have read many post on this site about that problem and have tried many of the answers that were given (only having one drive connected, using only one stick of ram etc). but it still will not install all the way to where you name the computer and put in a password. When I reconnect the other drives and boot into my win 7 32bit os and go to computer and check the drive that I was trying to install the 64 bit os the files are there. Of course under users there is only Administrator, default and public. I have tried 3 different install disk that I borrowed from other people and the same thing happens.
View 9 Replies
View Related
Apr 7, 2012
I have real player and I'm sure you guys are aware that it has an add on that allows you to download videos of the internet. Well, every time I download a movie, my movies never seem to finish. The download tab says they're done downloading, but once I play them they are usually only 1/3 or half of the movie downloaded.
View 5 Replies
View Related
May 24, 2011
Using any browser starts the online connection, etc. then seems to stop though it still shows it trying to connect to the requested website. Tried, on IE9, Chrome and Opera, it jsut seems to stop or spin it wheels.The odd thing is updates either by MS own or pgm. updates seem to go through provided on their own update procedure, like AV or pgm. update. The last update was .Net one, is that possible causing issues.Anyways, I maybe forced to return to some restore point, if no solution is found. I understand SP1 can cause some problems, but haven't heard of this. Seems odd is I can still update with MS update service(auto).
View 2 Replies
View Related
May 30, 2012
I have a process that is always running on my PC (Win7 sp1) that I can shutdown gracefully anytime and will also shutdown gracefully when the computer is restarted or shutdown if only it is given enough time. I'd like to add a little time (maybe 20 seconds) between the time the computer sends the shutdown command to all open processes and the time it sends the kill now command to any processes that are left open.If my process shuts down gracefully it restarts in about 5 seconds, but when it shuts down ungracefully it takes about 10 minutes.
View 3 Replies
View Related
Sep 25, 2010
I ordered a refurbished/reconditioned Packard Bell EasyNote TJ74 laptop from a very well known retailer in the UK called Currys. I received it two days ago. Initally, the laptop stayed on for all of about 5 seconds before shutting down, however I have solved that problem by Googling the text and looking here: pxe-e61:media test failure check cable. It was basically trying to boot from something other than the HDD itself, so I set the HDD to the top of the list in the BIOS.Then, the next problem I got was this: I get the "Windows is Starting..." screen, and then a setup services starting message, and then this:"Windows could not finish configuring the system. To attempt to resume configuration, restart the computer."I restart the computer and... nothing happens. No Windows installation/recovery disk came with the laptop.So, I set the laptop to boot from CD in the BIOS and, using a 64-bit edition recovery disc I found online and ran startup repair using it, apparently no problems were found, and I got a message about ensuring I didn't have any cameras etc. attached... ..Someone online recommended I disable digital driver signing, so I did that by pressing F8 at one point when it was booting... it doesn't seem to have made any difference. Safe mode doesn't work either.Currys have told me they can do nothing but send a courier to my house to pick up the laptop... I don't get a replacement, simply a refund. I needed this laptop for Monday as I start university.I've set it back to boot from HDD and I'm getting the "Windows could not finish configuring the system, please restart" message again and again and again, and the system just constantly restarts and the same message appears. It is a never-ending loop!
View 4 Replies
View Related
Jan 3, 2013
I was trying to format my computer, I had installed the OS of Windows 7 Ultimate x32 bit, and decided to take the opportunity to install a new one, but this time of x64 bits, this was my first time formatting my computer but apparently didnt finish good.
1: When first restart the computer to finish installing the OS, it Said That "The intallation of windows could not be completed. To finish installing Windows, restart the installation"
2: I try to do what it say, but when I try to restart the installation with the OS disk in, I get to the same window (not sure if that's what meant by what I just explained).
3: When I turn on my computer says something like: "select the operating system you want to use", and I get the "Windows 7" option twice.
I just found out according to format the computer i had to delete the partition that was the old OS and create a new one, but I cant get to that window, because as explained in section 2 always get the same message from section 1.
View 2 Replies
View Related
Sep 13, 2011
I am trying to uninstall some programs on my computer but every time I try, I get this same message. Of course I have rebooted my pc, and the other more obvious issues concerning this but every time I go in and try it does the same thing. I really need to get some programs off my pc! Box that comes up that states that I have to wait for the other program to finish uninstalling before I can do another in which it never is finished. It just sits there like that.
View 1 Replies
View Related
Jan 3, 2013
I've updated every time windows has told me to, and I haven't had any problems and they usually finish really quick, but this time it's stuck on the start up screen and just says something along the lines of "update 20 of 76 don't turn off the power or unplug" but it's been installing update 20 for 3 hours so I turned it off. Well actually I took the battery out because pushing the power button did nothing. Probably not the smartest thing to do but I was desperate. Even after it turned off, it just resumed the update. I can't do ANYTHING while it's updating, and I don't even know if I downloaded this update because I remember seeing a tray icon that said "downloading updates: 0%" not long ago.
View 3 Replies
View Related
May 16, 2011
My friend wanted a faster router for her new computer and she's using Ethernet now, but she is having hangups during the registration of both her new D-Link router, and her new Dazzle card that she is installing for direct TV purposes. She has Internet through her old router, Linksys, but she says it's too slow, so she got the new one. But in both cases, she hasn't been able to complete the registration process with either new item. It kicks her out after the first page, she says. She has windows 7 on a brand new, fast computer. She has viper as a virus protection. Someone else was trying to help her recently. She does not know where to start to find the problem. She fears this person may have inadvertently locked her out of completing the process, or.
View 5 Replies
View Related
Mar 15, 2012
I am using windows 7 home premium. If I use one login name and password in explorer it remeber automatically and did not even ask before login next time
View 1 Replies
View Related
Jul 26, 2012
when i click the finish button there shows "the operation you selcted will convert the selected basic disk to dynamic disk."
View 1 Replies
View Related
Oct 31, 2012
message after Sysprep stating "Sysprep Fails After Deployment With: Windows could not finish configuring the system."This is a new out-of-box Lenovo T530 laptop, it came pre-loaded with Windows 7 Pro.I pulled laptop from box and inserted our Windows 7 Pro SP 1 disk and installed our copy. I then configured all settings and applications under "audit mode", created an "Unattend.xml" file using the WSIM, and copied that file into the Sysprep folder and ran "Sysprep /shutdown /oobe /generalize /unattend:unattend.xml" The error message appears after I image drive using Ghost GSS 11.5.1.2266. (I'm assuming the error would appear after boot-up regardless of imaging the machine)I have read numerous articles regarding this error and have also disabled the "Windows Media Player Network Sharing Service" as suggested by many. I'm also assuming that the "Hotfix" for this issue does not apply since I am installing SP1.I am able to boot into the machine after attempting to boot into "safe mode" first (as suggested by many users), however once in, it looks as if the XML file is completely ignored.
View 5 Replies
View Related
Oct 21, 2012
My Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
View 15 Replies
View Related
Dec 1, 2012
I have a Seagate GoFlex Desk 3TB external hard drive. I got it about.. 6 months ago and I've never had a problem with it up until last week. I plugged it in and it started making a normal fan sound like is usually does, then after a few seconds it stopped which made it seem like it was shut off.
View 4 Replies
View Related
Oct 30, 2012
Getting the message after Sysprep stating "Sysprep Fails After Deployment With: Windows could not finish configuring the system...."This is a new out-of-box Lenovo T530 laptop, it came pre-loaded with Windows 7 Pro.I pulled laptop from box and inserted our Windows 7 Pro SP 1 disk and installed our copy. I then configured all settings and applications under "audit mode", created an "Unattend.xml" file using the WSIM, and copied that file into the Sysprep folder and ran "Sysprep /shutdown /oobe /generalize /unattend:unattend.xml"The error message appears after I image drive using Ghost GSS 11.5.1.2266. (I'm assuming the error would appear after boot-up regardless of imaging the machine)I have read numerous articles regarding this error and have also disabled the "Windows Media Player Network Sharing Service" as suggested by many. I'm also assuming that the "Hotfix" for this issue does not apply since I am installing SP1.I am able to boot into the machine after attempting to boot into "safe mode" first (as suggested by many users), however once in, it looks as if the XML file is completely ignored.
View 2 Replies
View Related
Feb 28, 2012
During a full system restore of my computer i didn't realize it was not charging and left it to finish the restore. Shortly coming back later, it had died so i rebooted it. During the reboot, it did its normal process well restoring," Setup is starting services.", but then during the process when gathering windows data to restore the computer in its final stages, it gives me the message" Windows could not finish configuring the system. To attempt to resume configuration, restart the computer." Shortly after starting my computer, going through the same process, it gives me that message again, and then it repeats, and eventually of course, goes into a circle of completing the same issue.
View 2 Replies
View Related
Aug 21, 2012
i have windows 7 my cpu is 2 yrs oldi had problems with I E and was told to delete it and download it and re install it.i went into add/remove and removed I E.@ms.com downloadedIE9
started to install got msg "could not finish installing due to a higher version alreadyrunning"we searched several ways and I E is not on this cpugeek squad is stumped (which i am finding out doesn't take much anymore)they want me to send in the cpu for a $300. checkup and more if they have to fix iti may have been born at night but not last night..there must be another way.
View 5 Replies
View Related
Feb 13, 2013
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies
View Related
Apr 6, 2012
After I tried to make a dual boot with Ubuntu and Windows 7 Ultimate (64-bit), Windows now does not boot. I have tried to reinstall and repair the HDD but the disc fails to recognize my HDD (Western Digital Scorpio Black 500 GB). My HDD is Basic, has 3 primary partitions and 1 extended (3 logical). Ubuntu 11.10 can boot fine.
View 2 Replies
View Related
Feb 20, 2011
Per microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
View 9 Replies
View Related
Dec 25, 2010
I have changed the ram and that fixed most NOw this one when w7 starts it looses parts like no disc drives no device manager no modem and so its a restart and they return untiull next time then it all stops again.some programs run slow internet pages are real slow changeing.I cant install word packages it crashes and now on install it comes up with cant find network.
View 6 Replies
View Related
