"Sysprep Fails After Deployment With: Windows Could Not Finish Configuring The System...."
Oct 30, 2012
Getting the message after Sysprep stating "Sysprep Fails After Deployment With: Windows could not finish configuring the system...."This is a new out-of-box Lenovo T530 laptop, it came pre-loaded with Windows 7 Pro.I pulled laptop from box and inserted our Windows 7 Pro SP 1 disk and installed our copy. I then configured all settings and applications under "audit mode", created an "Unattend.xml" file using the WSIM, and copied that file into the Sysprep folder and ran "Sysprep /shutdown /oobe /generalize /unattend:unattend.xml"The error message appears after I image drive using Ghost GSS 11.5.1.2266. (I'm assuming the error would appear after boot-up regardless of imaging the machine)I have read numerous articles regarding this error and have also disabled the "Windows Media Player Network Sharing Service" as suggested by many. I'm also assuming that the "Hotfix" for this issue does not apply since I am installing SP1.I am able to boot into the machine after attempting to boot into "safe mode" first (as suggested by many users), however once in, it looks as if the XML file is completely ignored.
View 2 Replies
ADVERTISEMENT
Oct 31, 2012
message after Sysprep stating "Sysprep Fails After Deployment With: Windows could not finish configuring the system."This is a new out-of-box Lenovo T530 laptop, it came pre-loaded with Windows 7 Pro.I pulled laptop from box and inserted our Windows 7 Pro SP 1 disk and installed our copy. I then configured all settings and applications under "audit mode", created an "Unattend.xml" file using the WSIM, and copied that file into the Sysprep folder and ran "Sysprep /shutdown /oobe /generalize /unattend:unattend.xml" The error message appears after I image drive using Ghost GSS 11.5.1.2266. (I'm assuming the error would appear after boot-up regardless of imaging the machine)I have read numerous articles regarding this error and have also disabled the "Windows Media Player Network Sharing Service" as suggested by many. I'm also assuming that the "Hotfix" for this issue does not apply since I am installing SP1.I am able to boot into the machine after attempting to boot into "safe mode" first (as suggested by many users), however once in, it looks as if the XML file is completely ignored.
View 5 Replies
View Related
Jan 14, 2009
resume configuration restart computer" i have more than enough to install this is a clean install on a 60 gig PATA HD. my pc is a P5N-E SLI asus MB.. 8800gt 512 MB video card. 2 gig pc6400 ram.. and theprocessor is e6850 dual core. so what gives?? i get no other info other than listed and when i reboot i get the same message?
View 9 Replies
View Related
Sep 25, 2010
I ordered a refurbished/reconditioned Packard Bell EasyNote TJ74 laptop from a very well known retailer in the UK called Currys. I received it two days ago. Initally, the laptop stayed on for all of about 5 seconds before shutting down, however I have solved that problem by Googling the text and looking here: pxe-e61:media test failure check cable. It was basically trying to boot from something other than the HDD itself, so I set the HDD to the top of the list in the BIOS.Then, the next problem I got was this: I get the "Windows is Starting..." screen, and then a setup services starting message, and then this:"Windows could not finish configuring the system. To attempt to resume configuration, restart the computer."I restart the computer and... nothing happens. No Windows installation/recovery disk came with the laptop.So, I set the laptop to boot from CD in the BIOS and, using a 64-bit edition recovery disc I found online and ran startup repair using it, apparently no problems were found, and I got a message about ensuring I didn't have any cameras etc. attached... ..Someone online recommended I disable digital driver signing, so I did that by pressing F8 at one point when it was booting... it doesn't seem to have made any difference. Safe mode doesn't work either.Currys have told me they can do nothing but send a courier to my house to pick up the laptop... I don't get a replacement, simply a refund. I needed this laptop for Monday as I start university.I've set it back to boot from HDD and I'm getting the "Windows could not finish configuring the system, please restart" message again and again and again, and the system just constantly restarts and the same message appears. It is a never-ending loop!
View 4 Replies
View Related
Feb 28, 2012
During a full system restore of my computer i didn't realize it was not charging and left it to finish the restore. Shortly coming back later, it had died so i rebooted it. During the reboot, it did its normal process well restoring," Setup is starting services.", but then during the process when gathering windows data to restore the computer in its final stages, it gives me the message" Windows could not finish configuring the system. To attempt to resume configuration, restart the computer." Shortly after starting my computer, going through the same process, it gives me that message again, and then it repeats, and eventually of course, goes into a circle of completing the same issue.
View 2 Replies
View Related
Mar 20, 2012
So I created an image earlier this week, sysprepped it and captured it after restarting the computer.Settings were OOBE / Generalize / Restart.When the computer had finished capturing the image to deploy studio, it restarted and went through the normal 'first run' procedures, but stopped during the configuration process saying:"Windows could not finish configuring your system. Restart the computer to try again" or something similar.I had a look at an earlier thread on here but the answer was similar to 'If you sysprep more than 3 times now it won't work'.
View 2 Replies
View Related
Sep 29, 2011
I am trying to put microsoft office 2007 on my laptop rumming windows 7 pro. I have the files on the computer but when i try to open word, excel, powerpoint etc, it says the operation system is not configured to run them
View 4 Replies
View Related
Oct 21, 2012
My Sony vaio just turned off last week and wont boot up. It turns on an flashes Sony vaio but that's all. I made a recovery disk and I can get into bios so I tried booting from internal disk and tried startup repair got nothing, tried system restore for every restore point and none will finish. Took each piece of ram out an tried starting it up to see if bad ram was the problem and it starts the same way. I also tried the restore from previous image but I have no image. So I don't know what else to try. Windows 7
View 15 Replies
View Related
Jan 4, 2012
I'm running Windows 7, 64-bit on an Intel Corei32100T processor on a Gigabyte H67A motherboard with 8gb ram, connected via HDMI to a Sony Bravia. No sound or video card as its all on the processor. I want to set up the system to record a line-in source for (1) my turntable and mixer, and (2) interface for my guitar and microphone. My device manager shows both Intel(R) display audio and Realtek HD audio. Clicking on the speaker icon in the notification area brings up the Intel display audio mixer with three sources, the Sony, system sounds and Firefox. I'm sure this is controlling the system audio output. No way to a recording mixer. Bringing up the Realtek audio manager still shows me no way to set recording levels. Since I'm planning to use the pc for recording LP to disc (on my second thousand, now, switching from favorite old programs on an XP machine to the newly built system)and for live recording, properly setting up the basic sound paths in the system before setting up Audacity and Artist One from Presonus.
View 5 Replies
View Related
Nov 7, 2012
I have just recovered my laptop toshiba satellite L505 es5018 windows 7 home premium 64bit to factory settings successfully. After that system start up but keep configuring system continuously. How may I solve this problem?.
View 4 Replies
View Related
Dec 4, 2012
Old office computer:
Dell E510
P4 3.4 GHz
4 GB RAM
Radeon x800 PCIE
Crucial M4 SSD 120 GB
Windows 7 x64
New internals:
CPU: AMD A4 5300
Mainboard: MSI FM2-A75MA-E35 FM2
8 GB RAM
Corsair 450 watt PSU
Cheap Cooler Master Case
After assembling the new computer, I ran it without the system disk installed to make sure everything was kosher, and memory timings, etc. were correct. After verifying that, I shut it down and put the SSD into the new unit and booted it up. The system posts fine, but once the Win 7 startup image shows, the system restarts and brings me to the "start windows in safe mode/start windows normally" prompt.
View 4 Replies
View Related
Jun 11, 2012
I am currently looking for a solution for customizing windows images and then automating the deployment/Out-of-box Experience (OOBE) for the business I work for. I have done some research for what is available, but so far I find the Microsoft solutions to be complicated or not quite what I need. I have done a bit of exploration with Microsoft Windows Automated Installation Kit (WAIK) and Microsoft Deployment Toolkit (MDT), but found that WAIK is a bit too complicated, and I don't believe MDT will suit our needs.Here is a bit of background information to familiarize you with our environment/needs:Customization:
-Currently we are taking the factory Dell image that comes with the laptops and customizing it to our needs by uninstalling bloatware and installing our default applications. We are also customizing the image by configuring power settings, screen saver settings, IE homepage, etc. To do this, we are currently forced to use local group policy, which disables the option to let the user change said settings. Currently, we do not have our domain environment setup with the proper OUs to use domain group policy. Therefore, we are using local group policy as a temporary solution. Once all of these settings are set, we create a backup image of the system before using sysprep, then we sysprep the box and create another image before booting the system again so that we can install the image onto computers and have them boot into OOBE for setup.
-We want to be able to set the desktop background, profile picture, IE homepage, screen saver, and power settings as defaults - i.e. giving the users permission to change them after receiving their system. Using group policy disables the ability to let the user change the settings after receiving the computer. Of course we don't want to use local group policy at all in a domain environment, but without our domain setup with the proper OUs, it appears we currently don't have an alternative.
Image installation/deployment:
-Currently we use Symantec Ghost to copy our customized image to each box. The OOBE is not customized at all, so each time we image a box, we have to manually select language settings, time settings, connect to the wireless network, etc.
-What we want is to be able to automate the process by predefining most of these settings. That way, when we startup the computer with the new image, we only have to enter the user account and computer name, while the rest of the settings are automated.
From what I understand, XP deployment was done using an unattend or answer file that you used to answer the prompts in OOBE. As I said before, I have done some research on WAIK and MDT, but they don't seem to be user friendly (specifically WAIK) and will take a whole lot of time to learn and then more testing to see what works and what doesn't. My hope is that someone could show me possible third party tools for customizing the image and/or automating the OOBE/deployment process. I am currently encountering issues with setting a custom desktop background for new users, which should be a very simple task, but Microsoft doesn't seem to want to make it simple.
View 11 Replies
View Related
Aug 2, 2011
I've been running disk and system maintenance on my computer, and sfc found some corruption it couldn't repair. It looks like it's .NET framework 4 that has the errors, so I uninstalled it and its updates, then reinstalled it and updated it, but the problem remains. Since that didn't solve it, I'm not sure if that's where the problem is or what to do about it. Anyone know which files I need to look at before I resort to doing an upgrade/repair installation?
2011-08-02 11:35:11, Info CSI 000002e3 [SR] Cannot verify component files for Microsoft-Windows-NetFx4-Shared-Deployment, Version = 6.2.7600.16513, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral, manifest is damaged (TRUE)
View 3 Replies
View Related
Jul 11, 2012
I am performing a clean install of Windows 7 64bit Home Premium with SP1 integrated on a Dell Studio XPS 8100, and after the first reboot during installation, I get a message "Windows could not configure one or more system components. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation." This is a 64 bit machine. Was running Windows 7 64bit Ultimate until yesterday.
Tried partitioning/cleaning/wiping the drives in so many ways I couldn't even count, including "clean all" from repair disk, booting to ubuntu live cd and making sure no rogue filesystems/partitions exist, letting windows installer create partitions, precreating the partitions in diskpart/ubuntu. Have tried several iso's and several cd's/usb drives.
Messed with some bios settings, but to no avail, and made sure my bios was up to date. Downloaded drivers from dell and loaded chipset drivers pre-installation just in case. Have removed all extraneous devices from system excepting the keyboard, mouse, HD, CD-drive, and video card. The 32bit version of Windows 7 Home Premium installed completely fine, with no issues whatsoever, even without pre-loading the chipset drivers.
System Specs:
i7 870k
8GB 1333-MHz DDR3
Intel H57 Chipset
Two regular old 7200 Western Digital drives
GH50N CD-DVD Drive
GTX 560ti
View 3 Replies
View Related
Jan 21, 2013
Windows fails to connect to system events log and events log service is unavailable.
View 1 Replies
View Related
Oct 29, 2011
I am using Windows 7 OPK and I'm deploying images to the computers that I sell.I would like to activate windows before shipping to my customers however, after windows has been activated in Audit mode, sysprep runs to reboot the PC in OOBE mode, but windows is no longer activated and the customer has to activate the machinethemelves. (I do not want them to do this!, I just want them to be able to use their PC without faffing about with activation)
View 2 Replies
View Related
Jun 21, 2011
i want to dpely windows 7 across around 10 PC's but minimise user downtime, as such i intend to install manually using retail versions of the software then update to the specifications i need. all the final workstations will need to be the same.i have 3 pc's to roll out, then i will drag 3 in, upgrade, redeploy and so on, thus meaning that noone will loose much productivity to downtime.whats killing me is that after install, which takes around 30 mins including office and other bits of software, the patching and updating of windows on each machine to latest KB updates is taking forever!! so with say 10-15 new pcs all trying to install updates within few hours its going to slow the network to a stop.is there anyway i can take one of the pc's i have finished, image the updates and software installs then patch them all onto a new clean install of retail windows 7? have looked at all sorts of networkable options such as microsoft system essentials or symantec ghost, but none will allow a stand alone image creation off network that i can tell
View 1 Replies
View Related
Jan 27, 2011
So I have about 800 pc's that we are deploying and going to image with Windows 7 Pro 32bit. I have only used Windows 7 sysprep a few times and have been working on getting a new answer file working on it.I have also everything working the way I want to. The only screen I want the user to be prompted for is the computer name screen. Right now it asks for the computer name like it should but also comes up with the time and timezone screen with the correct info so I have to click next.I have made sure to put in the correct time zone info and everything but it keeps coming up with the time zone page.
View 5 Replies
View Related
Jul 27, 2010
I have MDT 2010 setup and am in the process of setting up a 2nd share, I created the share with no issues, and created the "link" without issues as weel. I am now trying to get the linked share to replicate, and am getting an error that the "everything" profile is not valid, when it does exist on the new share. I even tried creating a new profile and setting it to that one, still get the exact same error.
View 1 Replies
View Related
Apr 12, 2011
I've have had three working Windows 7 images (Lenovo T510, Lenovo X201, and a Fujitsu T900) for several months. Periodically I install MS updates, make other necessary changes, run sysprep, and recapture the images in an effort to keep them current. Recently now during this update process, after running sysprep (using the same sysprep xml answer file that I have been using all along), wireless no longer works after applying the updated image. The wireless driver appears to be installed, but will not detect any wireless networks. If I attempt to create a wireless network profile manually, I receive "an unexpected network error has occurred."
The wireless device does appear in Device Manager as though it's in tact but if I run diagnostics, the wireless device is not found. Uninstalling, and reinstalling the driver does not fix the problem. I have come up with a workaround, but it is not a true fix, as the workaround prevents me from being able to consolidate the T510 and X201 into one universal Lenovo image as I should be able to do. The workaround consists of adding the following two lines to my xml file:
<PersistAllDeviceInstalls>true</PersistAllDeviceInstalls
<DoNotCleanUpNonPresentDevices>false</DoNotCleanUpNonPresentDevices>
This allows the wireless to work again because sysprep no longer strips the wireless driver as it processes. However because the wireless driver remains on the image after sysprep, I lose the ability to consolidate the images. After I Inject the T510 drivers into the X201 image, or vice versa, after then I apply the image, wireless only works on the model that the image was captured on, even though the wireless driver for the other model was injected into the image. The strange thing is that the T510 and X201 have the same wireless chipset.
Lenovo T510 - Intel Centrino Advanced-N 6200 AGN
Lenovo X201 - Intel Centrino Advanced-N 6200 AGN
Fujitsu T900 - Atheros AR928X Wireless Network Adapter
View 1 Replies
View Related
Jul 10, 2012
Upon booting up my laptop, everything seems fine at first. My desktop loads as does any startup programs as normal for a good few minutes until the startup procedure is finished, then simultaneously any programs I have open fail to respond and after a few more minutes my operating system fails to respond. Between the time of the programs and the operating system failing to respond, I cannot execute any other programs nor can I lauch task manager (CTRL+ALT+DELETE etc.). A while after the operating system fails to respond this error pops up, no doubt as a response to me trying to open task manager:"Failure to display security and shut down options. The logon process was unable to display security and logon options when CTRL+ALT+DELETE was pressed. If the operating system does not respond, press ESC or restart the computer by using the power switch."
All this occurs without fail everytime I boot up as normal.I can boot up my laptop in Safe Mode with success which has allowed me to try a number of things but I am no computer tech so my knowledge is slim to none. These are what I have tried:
1) I have run anti-virus and anti-malware programs which came back clean.
2) I have tried to go back to a system restore point but apparently I have none.
3) I have tried a clean boot up (with only Microsoft start up procedures) but did not help, just made my OS fail to respond almost instantly as my desktop loading instead of after a fair amount of time.
4) I have 'restarted winsock' on a forum suggestion from another post it may be a particular virus and rebooted but this did not help.
5) I have turned off UAC and rebooted incase something was making changes causing Windows to fail to respond from another forum suggestion. This did not help either.
6) Rebooted with last known working configuration option.
I should also point out I have not recently added any hardware or software that could make this occur. However, maybe the last 3 things I did before the problem occured could help explain. Firstly, I ran a full anti-virus scan with AVG which removed a rootkit and deleted something 'malicious'. After that I used AVG PC tuneup to clean the registry, defrag and clear junk files. Lastly, I tried to run Steam which froze on an update and I tried to restart my laptop, which froze on the "Logging off..." screen for ages by which time my laptop battery must have died. After this the problems arose.
I really want to avoid anything which might have to result in my reinstalling Windows 7 as my laptop came with it pre-installed so I do not have a Windows 7 disc or a OS backup.
Laptop:- Sony Vaio VPCEA3M1E, Intel Core i3.
OS:- Windows 7 64bit Home Premium
View 1 Replies
View Related
Jan 30, 2011
I have tried to restore my system to an earlier state to remedy the faulty uninstallation of a speech recognition programme, which tries to reinstall every time I start the computer. System restore restarts the computer but then tells me the restore process failed, once i am back to my desktop. OS is Windows 7 Home Premium and computer is an Acer Aspire laptop. System partition is encrypted using Truecrpyt.
View 3 Replies
View Related
Oct 27, 2012
I am installing Windows on my new SSD. I made the disk GPT (instead of MBR), and installed Windows (tried 5 times now) with similar results. Either error 0xc0000225 or boot loop of "Windows is loading files" ... or it throws me back to my BIOS Boot selection screen where I came from ... what might be the problem? Windows 7 still cant handle GPT partitions? Or it doesnt like the new SSD? I managed to install and reboot successfully once by removing all other drives (except the SSD which I am installing into), works, I can enter Windows. Then once I installed back the other HDDs, it fails again ...
View 4 Replies
View Related
Aug 20, 2012
I am trying to set up a MDT Deployment that will install Win 7 and MS Office 2010. With the Win 7 install I am able to have the system ask for the Windows Key after the install has completed. I would like to do the same for MS Office. I am going to be using this deployment tool for every new computer we get going forward and don't want to have to update my deployment every time I run one. I simply would like to deploy the image and then enter the Product key and activate it.
View 2 Replies
View Related
Jan 22, 2011
My Win7 HP x64 PC has two hard drives, each partitioned into two volumes:
My C: and E: drives are each half of a 200GB drive, both NTFS.
My D: and F: drives are each half of a newer, 1TB drive, both NTFS.
My F: drive has around 400GB of 'stuff' that I want to preserve.
I've been trying to migrate the win7 installation from C: to the first partition of the 1TB drive with two different tools (Norton Ghost and the built-in Windows backup utility) and both fail identically.The backup procedure itself appears to work in both cases.Restoring the backup to the first partition of the 1TB drive "works" in so much as I don't get any errors either way.Creating the requisite boot structures also work, as the O/S appears to be bootable.However, when the restored O/S makes it to the login screen, two flaws are evident:
1. The keyboard absolutely does not work.
2. If I log in on an account that doesn't need a keyboard (no password), I see "Loading desktop", then a few seconds "Logging out" and I'm back at the login screen.
If I look at the event viewer logs (booting up with the O/S on the smaller drive), I see numerous events like this:"The AVGIDSAgent service failed to start due to the following error: The system cannot find the file specified.""The Windows Live ID Sign-in Assistant service failed to start due to the following error: The system cannot find the file specified."
[code]....
View 1 Replies
View Related
May 1, 2012
I want to create a system image on my NTFS formatted portable WesternD HDD. Now It has about 250GB of space left(the portable HDD), and the Laptop PC that i want to create the image of, tells me I need about 199GB for the system image.Then first time I created the image, it gave me a failure message saying I should run a CHKDSK /R and ty again. I ran a CHKDSK /R on the external drive and tried making a system image again, where it got about halfway and gave me the same message. What is going wrong every time?
View 4 Replies
View Related
Feb 26, 2012
When I try to go to my computer I get an error (explorer.exe - application error. The instruction at 0x774bc5f7 reference memory at 0x48e44c59. The memory could not be read.) I ran my norton 360 scan and malwarebytes scan and no virus/spyware detected. Also I ran memtest to see if my rams were bad and everything seems find. I also try to do a system restore and it fails too.
View 2 Replies
View Related
Feb 26, 2010
run windows 7 on an old laptop, an hp pavilion zt1250 (1ghz, 1gb ram, 20gb hdd, dvd/cd, external wlan, xga screen, that sort of old). it isn't like a serious installation, it is more like a "post on Internet to a "windows 7 running on a nine year old laptop" or "wow your friends with your old computer running a newer os than their new one (possibly)"", and because it looks pretty darn cool. anyway, i pop in the install dvd and we get past the gray progress bar and onto "starting windows", until all of the sudden out of nowhere, just a second before the cutesy windows logo animation appears, i am instantly greeted with a blue screen saying nothing more than:
stop: 0x000000a5 (0x0001000b, 0x50434146, 0xffd0ac0, 0x00000000)
it does it on all install discs that i've tried, and it gives me the same error consistently every time. i even tried starting the installer within xp, and that starts okay, but after the first reboot where it boots the partially installed os from the hard drive, it does the same thing before it can continue. everything that is not essential has been unplugged, tried removing ram modules, on battery or plugged in, checked the extremely simple bios settings menu (you can change like three things, none of which pertain to the situation), and most other items that could possibly be covered here. this leads me to the conclusion, that since it my disc is fine and my hardware is fine (did a bios update), that the installation disc must be first modified in some way, perhaps to skip a certain unnecessary check?
View 9 Replies
View Related
Jun 7, 2011
I'm creating a windows 7 x64 image for work. I want to enable WoL. I've checked all of the necessary power management options to 'allow nic to wake the computer' and 'only with magic packet' etc. but after sysprep, since the NIC drivers are reinstalled after windows performs sysprep, those settings are not saved. There are three checkboxes that I need to check on the Wired NIC. Does anyone have a script, or the knowledge of how to accomplish this after sysprep? I have tried several windows xp scripts, but those don't work with this new onboard nic. It's a NIC on the optiplex 790.
View 9 Replies
View Related
Jan 23, 2012
I just got a job as an IT assistant and one of my first projects was to make a deployment image of both Windows XP and Windows 7.
I did a bit of reading into the "Sysprep" tool, and actually did make a successful image, the problem is that it asks for a serial number each time. Our computers are Dell workstations that come with Windows 7 on them already, pre-activated, so this doesn't really work.
What I did for our XP workstations was this: Preserving OEM Pre-Activation when Re-installing Windows XP That worked like a charm. I have it set up to automatically connect to the domain, and everything, all the user has to fill in is their name and the name of the PC.
Is there something similar for Windows 7? I'm assuming Microsoft is not going to just hand out serial numbers like that until 7 is EOL like XP is, but is there some other way to do it? Provided I have the pre-activated one installed, can I have it not deactivate or prompt for a serial number upon running Sysprep?
View 2 Replies
View Related
Jul 17, 2010
I've setup Windows Media Player how I want, and then use Sysprep with the copyprofile option ticked to copy all settings to default user.
When an end user logs into the Windows 7 PC and they go to click on Windows Media Player, they get the "Welcome to Media Player" screen and have to go to configure settings etc.
Why are they not saved or copied across with sysprep?
View 3 Replies
View Related
