System Fails To Boot Setup DVD - STOP ERROR 0x000000A5
Feb 26, 2010
run windows 7 on an old laptop, an hp pavilion zt1250 (1ghz, 1gb ram, 20gb hdd, dvd/cd, external wlan, xga screen, that sort of old). it isn't like a serious installation, it is more like a "post on Internet to a "windows 7 running on a nine year old laptop" or "wow your friends with your old computer running a newer os than their new one (possibly)"", and because it looks pretty darn cool. anyway, i pop in the install dvd and we get past the gray progress bar and onto "starting windows", until all of the sudden out of nowhere, just a second before the cutesy windows logo animation appears, i am instantly greeted with a blue screen saying nothing more than:
it does it on all install discs that i've tried, and it gives me the same error consistently every time. i even tried starting the installer within xp, and that starts okay, but after the first reboot where it boots the partially installed os from the hard drive, it does the same thing before it can continue. everything that is not essential has been unplugged, tried removing ram modules, on battery or plugged in, checked the extremely simple bios settings menu (you can change like three things, none of which pertain to the situation), and most other items that could possibly be covered here. this leads me to the conclusion, that since it my disc is fine and my hardware is fine (did a bios update), that the installation disc must be first modified in some way, perhaps to skip a certain unnecessary check?
I have downloaded windows 7 home premium upgrade ISO from the microsoft store. The burned the iso to disk using the image burner in windows.
My problem is that the disk will boot, and a "windows is loading" screen appears which only takes a minute. Then a windows background appears on screen with a cursor. That is all. No setup at all. What might be wrong here. I would like to make a bootable disk that works.
I can run setup from an OS, but that is not what I want to be able to do.
upgrade my system from Windows XP Pro SP3. The setup starts and gets past creating a user account, setting a computer name etc and then restarts and looks like Windows 7 is going to startup and then I get a BLUE SCREEN OF DEATH with:
STOP: C000021a [Fatal System Error}
The intial session process or system process terminated unexpectedly with a status of 0x00000000 (0xC0000001 0x00100400)
It then mentions about dumping the memory out to disk and reboots. If i press F8 and attempt to boot SAFE MODE I get a requester saying that setup cannot be completed in Safe Mode. If try the startup recovery the first time it says it fixed a problem and wants to restart again but it has fixed nothing. Next time the startup recovery just runs and doesn't appear to finish.
I have run the Windows Memeory Diagnostic within the setup and memory checks out fine. I initially thought the onboad audio chipset was the issue and disabled that but it made no difference. I did get one successful installation but it eventually crashed and burned with the same error after approximately 12 hours.
Workaround for nVidia display driver issue Motherboard: ASUS M2NPV-VM BIOS Version: 0504 GPU: nVidia GeForce 6150 in Windows 7 RC Symptoms: Stop Error 0x0000001E caused by nvlddmkm.sys during Windows 7 RC setup
Details:Perform these steps on another computer:
1) Download a current driver from nvidia.
2) Extract nvlddmkm.sy_ using WinRAR.
3) Expand nvlddmkm.sy_ from windows command prompt
cd [path_to_nvlddmkm.sy_] expand -r nvlddmkm.sy_ nvlddmkm.sys
4) Put a copy of the new nvlddmkm.sys file on a flash drive
Restart Windows 7 Setup and perform these steps:
1) During the "Expanding files" step, press Shift-F10 to open a command prompt
2) Replace the nvlddmkm.sys file located at C:WindowsSystem32DriverStoreFileRepositoryv_lh.inf_amd64_neutral_4f38d443efdd0a70 with the new one from the flash drive. Wait for setup to create the file before you replace it -- seems to occur when the progress meter reaches about 70%.
I Installed Acronis Disk Director Suite 10.1 yesterday on my Windows 7 and got this problem when it boots up I get the option to choose OS. Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
Then I tried to run the Windows 7 installation disk, I go to the cmd prompt and run the
DISKPART
diskpart
list disk
select Disk X (X=disk where I installed all the OS, should be Disk 0)
list partition
select Partition X (X=partition containing OSX)
Virtual Disk Service error:
The pack is not online
and then i run the Bootrec /ScanOS, it came with 0 identified Windows Installations, this is why I come into the cmd prompt as I could not select the installed OS.
I've tried that from bootable cd to repair the install but the partition of windows7 is not recognized still.
I had the brilliant idea to delete the manufacturer's recovery partition on my ASUS Win 7 64-bit laptop, and reclaim that space for my C drive, and now my system is unbootable. I get the error message "autochk program not found" then stop: c000021a Fatal System Error. I have run System Recovery several times to no avail. I tried to do a repair using the Win 7 DVD, but that didn't work either.
When I try to go to my computer I get an error (explorer.exe - application error. The instruction at 0x774bc5f7 reference memory at 0x48e44c59. The memory could not be read.) I ran my norton 360 scan and malwarebytes scan and no virus/spyware detected. Also I ran memtest to see if my rams were bad and everything seems find. I also try to do a system restore and it fails too.
STOP: C000021a {Fatal System Error}The initial session process or system process terminated unexpectedly with a status of 0x00000000 (0xc0000221 0x001003a8). The system has been shut down.This error or any other type of error occurs when I try to run repair or if I remove my internal Cd-Rom.
I have a FW-1082 mixer/sound device connected to a firewire pcie card, and my problem is that whenever i try to shutdown or restart computer i get a bsod. after some research on the net, i have found that i can make a net stop .bat file to stop "AudioSrv" and "AudioEndpointBuilder". However when i run the batch file for the "AudioSrv" i get a System error 5 has occurred, Access is denied, message. Can anyone please tell me how i can resolve this?
As you've probably heard countless of times before this error has come up on my HP Paillion G6 laptop. I have tried the recovery disk to repair startup but nothing happened. I don't have a Windows 7 disk either...I need this repaired by Sunday as this is the only time I have other PCs to use in case I need to download/burn anything.
EDIT: I also forgot to mention I have no system restore points and I cannot boot last known configuration or boot into Safe Mode?
i have installed windows 7 in may sysytem a few monts ago and since then each time i install a program the program works fine but after two or three restarts it give an error that the program has stopped working and give me two opptions (1)check online for more solutions(2)close the program and when i go to more details its says that the problem name is:APPcrash
my system is a 1 GB ram +2.66 GHZ processor+80 GB HDD+an Aopen mother board
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
I am at a bit of a loss here in regards to partitions, as I've never really done it, I want to configure a new system setup under the following circumstances:
SSD(1): (dual-boot OS drive) + Partition 1: Windows 7 + Partition 2: Windows Server 2012
SSD(2): (program / file drive) + Partition 1: one large single partition for application / program storage; e.g., Visual Studio 2012 and SharePoint Server 2013.
I need to have an instance of Windows Server to use SharePoint Server. At times I will want to run the server set-up to facilitate TFS and SharePoint with a very small team of developers, school related for example. And at other times I would like to boot into Windows 7 Ultimate so I can have a normal browsing experience and play games, etc. But of course I could also develop with VS11.X in Win 7 environment if needed.
My question, is what I'm proposing possible? I want to use Windows 7 normally most the times, but at others I will require Server 2012 to use SharePoint. Can I share the same program resources on the second SSD regardless what OS I boot into? What issues may rise if I tried running SharePoint (or just having SharePoint) while booted into Windows 7? Will I have to create two partitions on the 2nd SSD, a copy of apps for each OS due to system registry constraints.
After 8 long years I've finally upgraded my wheezy old pc, and now am drooling to play with this beastly new machine I've just assembled. My system specs should be in my sig below.But after 12 long hours of trying to install windows 7 pro, I'm more kinds of frustrated than there are words for.As in the topic title, I'm up against the "setup cannot find or create a system partition" error. My machine has a single 2 TB Hitachi Sata 3 hard drive, so there is no raid to muck things up, which seems to have been the primary cause of everyone elses troubles with this error. Using my old rig, I partitioned the new drive and transferred all the data from the old drives, leaving the first 75 GB partition empty and waiting for windows 7.
Then "the troubles" began. Research ensued.First thing I tried was to load updated sata 3 drivers from the mobo install disk. No help.Then I tried downloading the latest drivers from Asus and loading them from a flash drive during installation. No dice.Then I tried changing bios settings from Sata to IDE. No dice.Tried all of the above again with minor tweaks. Using the setup tools, I deleted that first partition and tried to make it again but setup gives me the title error.Well, of course I need that partition back so after some more research, I downloaded gparted, booted it up, but the video output is messed up and impossible to read.Then I slept for 6 hours. I woke up, tenacious and desperate, and figured I'd try diskpart (well above my paygrade) to make the first partition active and/or primary. Diskpart won't allow it? I disassembled my new system, plonked the old system back into the case, booted up into winxp off the old hard drive and with Easus partition manager and tried the same thing as with diskpart, but with the same results. No dice.Then, clearly somewhat crazy at this point, I put the new machine back in the case and tried ALL OF THE ABOVE AGAIN. No dice.Upon boot, POST sees the hard drive, but its not detected in bios. I don't know whether this is a hard drive problem, a mobo problem, a configuration problem, or completely normal for my gear. In any case, windows setup lists all the partitions.
I am having a problem with doing a fresh install of Windows 7. It is on a Dell Inspiron 1546 with a 150 GB hard drive. There was an original install but the computer was having issues as some files were corrupted. I used the Windows 7 disc to format the hard drive and booted from CD after restarting.
However when I try to install the new Windows 7 it sits at the part where it says: Expanding files. Then after a while an error pops up that says: Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me saying Setup was unable to create a new system partition or locate an existing system partition.The stupidity that I did was deleted the partition which had the Recovery Drive in it. So, now I am stuck and not able to install Vista as well as Windows 7. I am not able to boot Windows as there is no OS in my laptop now.
Back in the good ol days of xp when I wanted to take my machine off the net and use it for music production I had a seperate hardware profile setup with lots of services (including all the networking ones) disabled. With vista I discovered microsoft had taken this ablity away. So I wrote a batch file which when run as administrator would more or less do the same thing (lots of net stop commands). Now in windows 7 I've written a new one but whenever I run it (as admin of course) a cmd window flashes up for a second & then nothing... all the services are still running
Just today I decided to download the Windows 8 consumer preview and setup my PC to dual boot with it.I am running Windows 7 home premium 64bit and the 64 bit windows 8 on my other partition. After setting up a separate partition on my hard drive and loading windows8 to this partition, I was all up and running. I had no problems setting up or running windows 8, the problem came when I booted back to windows 7 for the first time. When I booted into windows 7, I was getting the "unable to identify network" error, and no network connectivity.
First thing I tried was simply disable/enabling my network adapter thinking it was just some hiccup. No luck there. Next I pulled the power from my router, and let it completely reboot. Still no luck. I then shut down my pc and booted back into windows 8 and sure enough I am able to get internet connectivity when I am running windows 8. This got me to thinking that when I loaded windows 8 there may be some new drivers installed for my network card that are somehow causing issues when I load into windows 7 again. Not sure how this is possible.
I was under the understanding that when I loaded Win8 to the separate partition that it would keep all it's drivers and settings there and not effect anything when I was loaded back on windows 7 (This logic could be completely wrong, I don't know). So I rebooted and loaded back into windows 7, went into device manager and uninstalled both network adapters and drivers, and rebooted into windows 7 again so it could re-discover and setup the network cards with default windows 7 drivers. This did not work either and I am still getting the same error.
I am trying to install Windows 7 on my Acer Predator 7750G but everytime the first installation phase stops it says that it cannot configure my computer so the installation will stop.I have had some virus problems on my HDD were i couldn't see what was on them, that is the reason why i have choosen to install from scratch on the computer!
I recently set up a new computer, and managed to get a copy of Win 7 Ultimate. However, I get an ambiguous error when I attempt to set up the Windows XP Mode. I'm able to boot a virtual machine, and my CPU's VM options are turned on.
one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
I'm running windows 7 in a dual boot configuration. Both OS installs are on a single physical drive (drive 0) and partitioned as C: and D: The primary install is on C: and I needed to extend the partition as I was running out of space; however the D: partition was immediately to the right so I needed to use gpart to move the D: partition and make some space to the right of the C: partition.The move went fine, I restarted and I could get into my primary on the C: without an issue; however, when I select the other install of the OS that's located on the D: partition I receive an error that the system cannot boot. how to make my machine dual bootable again?
I'm working on a client's laptop, compaq Presario CQ57, 2gb ram 250 GB HDD.
I installed a new harddrive and installed a new copy of Win 7 Home Premuim x64 After it reboots, it just hangs in the welcome screen with the Windows logo.
I reboot via Windows 7 repair disc and run C: chkdsk /r and I get this message "disc check error 766f6c756d652e63 3f1"
Here are the drives I have on my computer: -Windows 7 installed on a 1TB drive -Windows XP on a 500gb drive -2TB drive for storage. -1TB drive for storage -500GB drive for storage
Windows 7 was installed before XP, and I believe XP came after the physical installation of the 2TB drive. I always have to press F8, and then select the first hard drive in the list, and then I'd be able to select to boot "Windows 7." Otherwise it'd give me "boot disk boot error, please insert system disk." The drive I'm selecting is my 2TB drive. My computer won't boot if the 2TB isn't plugged in. I've tried Option One and Two from here with no luck: [URL].
I am attempting to restore from a system image, but keep receiving a boot manager error message: Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible
The computer boots no problem normally, it is only when restarting to restore the system image.
I'm attempting to do an upgrade/update install of Windows 7 Professional over Vista Business. Everything checks out with the update advisor, the anti-virus and anti-spyware programs have been turned off (I have, however, left the Windows home-grown firewall on), but shortly after the temporary files have been copied and the setup begins, I received a dialog box saying that an unexpected error has occurred and that I should retry the installation.
My system is multi-boot with the first partition for Windows XP Professional, the second with Vista Business, and the third and fourth with OpenSuse Linux. I'm trying to upgrade/update the Vista partition. SP1 has been installed for Vista, and all of the updates contained in SP2 have also been installed.
Upon booting up my laptop, everything seems fine at first. My desktop loads as does any startup programs as normal for a good few minutes until the startup procedure is finished, then simultaneously any programs I have open fail to respond and after a few more minutes my operating system fails to respond. Between the time of the programs and the operating system failing to respond, I cannot execute any other programs nor can I lauch task manager (CTRL+ALT+DELETE etc.). A while after the operating system fails to respond this error pops up, no doubt as a response to me trying to open task manager:"Failure to display security and shut down options. The logon process was unable to display security and logon options when CTRL+ALT+DELETE was pressed. If the operating system does not respond, press ESC or restart the computer by using the power switch."
All this occurs without fail everytime I boot up as normal.I can boot up my laptop in Safe Mode with success which has allowed me to try a number of things but I am no computer tech so my knowledge is slim to none. These are what I have tried:
1) I have run anti-virus and anti-malware programs which came back clean.
2) I have tried to go back to a system restore point but apparently I have none.
3) I have tried a clean boot up (with only Microsoft start up procedures) but did not help, just made my OS fail to respond almost instantly as my desktop loading instead of after a fair amount of time.
4) I have 'restarted winsock' on a forum suggestion from another post it may be a particular virus and rebooted but this did not help.
5) I have turned off UAC and rebooted incase something was making changes causing Windows to fail to respond from another forum suggestion. This did not help either.
6) Rebooted with last known working configuration option.
I should also point out I have not recently added any hardware or software that could make this occur. However, maybe the last 3 things I did before the problem occured could help explain. Firstly, I ran a full anti-virus scan with AVG which removed a rootkit and deleted something 'malicious'. After that I used AVG PC tuneup to clean the registry, defrag and clear junk files. Lastly, I tried to run Steam which froze on an update and I tried to restart my laptop, which froze on the "Logging off..." screen for ages by which time my laptop battery must have died. After this the problems arose.
I really want to avoid anything which might have to result in my reinstalling Windows 7 as my laptop came with it pre-installed so I do not have a Windows 7 disc or a OS backup.
Laptop:- Sony Vaio VPCEA3M1E, Intel Core i3. OS:- Windows 7 64bit Home Premium
I have tried to restore my system to an earlier state to remedy the faulty uninstallation of a speech recognition programme, which tries to reinstall every time I start the computer. System restore restarts the computer but then tells me the restore process failed, once i am back to my desktop. OS is Windows 7 Home Premium and computer is an Acer Aspire laptop. System partition is encrypted using Truecrpyt.
I am installing Windows on my new SSD. I made the disk GPT (instead of MBR), and installed Windows (tried 5 times now) with similar results. Either error 0xc0000225 or boot loop of "Windows is loading files" ... or it throws me back to my BIOS Boot selection screen where I came from ... what might be the problem? Windows 7 still cant handle GPT partitions? Or it doesnt like the new SSD? I managed to install and reboot successfully once by removing all other drives (except the SSD which I am installing into), works, I can enter Windows. Then once I installed back the other HDDs, it fails again ...
Okay, so this just happened out of nowhere. Nothing seems to have led up to this -- the system booted and shut down successfully, and no software updates or installs were done during the period of time it was on when it was last working. I've attempted many things, but none seem to work. /ScanOs reports no OS detected, while startup repair said the OS was booted successfully. bcdedit also shows no directories linked to "unknown". CHKDSK reports no bad sectors, so such can be discarded. This happens every time I attempt to boot to Windows 7 (Home Edition, x64). I have a copy of Fedora 17 set to dualboot with it
