Receive An Error That The System Cannot Boot
Sep 15, 2012
I'm running windows 7 in a dual boot configuration. Both OS installs are on a single physical drive (drive 0) and partitioned as C: and D: The primary install is on C: and I needed to extend the partition as I was running out of space; however the D: partition was immediately to the right so I needed to use gpart to move the D: partition and make some space to the right of the C: partition.The move went fine, I restarted and I could get into my primary on the C: without an issue; however, when I select the other install of the OS that's located on the D: partition I receive an error that the system cannot boot. how to make my machine dual bootable again?
View 2 Replies
ADVERTISEMENT
Jan 27, 2011
After switching on computer win7 x32 receive the error RPLUD is compressed. Press CTRL+ALT+DEL to restart After switching on your computer received the error RPLUD is compressed. Press CTRL+ALT+DEL to restart on a black screen with white writing when trying to boot into Windows.Also tried to system restore by inserting win 7 disk but its also not happening.I keep getting the following from all the restore points I try."System Restore did not complete successfully. Your computer�s system files and settings were no changed.
Details:System Restore failed to extract the file (C:) from the restore point. An unspecified error occurred during System Restore. (0x8000ffff)You can try System Restore again and choose a different restore point. If you continue to see this error, you can try an advanced recovery method. For more information, see What is Recovery?"
View 1 Replies
View Related
Aug 25, 2011
ive recently run into and problem that isn't allowing me to update windows. I currently have 5 updates that need to be installed and all 5 of them always fail.The error i receive is Code: 800736B3.I have searched around on Google and tried the Update readiness toll and Microsoft Fixit for this issue and none of them seem to work.
View 1 Replies
View Related
Feb 18, 2012
Receive error message when attempting to download
View 1 Replies
View Related
Sep 30, 2011
I'm working on a Brand New Dell Inspiron 1525 with W7 OS. I was in the middle of catching it up on all the updates and they went in fine except it when it got to Service Pack 1, It will not install SP1. I receive the error code: 800B0100 I also went thru the steps of "Get help with this error" and it went thru "Windows Update troubleshooter" said the problem was "fixed", however still failed the next 4 tries, any suggestions? THX!!!
View 4 Replies
View Related
Nov 28, 2011
This problem just started today and I am a bit confused when I try to get my email on WLM I get the above error. I am going through my ISP and using POP3 the POP setting is pop.midstatesd.net and smtp.midstatesd.net all of the setting are correct so not sure why I am getting the error. I should mention that I am connecting using a laptop with a Dlink router and do not have any issues connecting to the internet. I am unable to ping the pop.midstatesd.net so figured something was set wrong on the router but cannot find any thing that would be blocking it there.
View 4 Replies
View Related
Sep 13, 2012
when I click Send/Receive in Outlook 2007 it fails and I get an Error message - 0x80040600. I've tried running the Repair Tool in SCANPST.EXE but this doesn't help, it states that all errors have been fixed, but then I still get the error message. I'm not running Exchange.
View 6 Replies
View Related
Sep 22, 2012
I am using Windows 7 together with Windows Live email, which has been working ok until of late.My internet provider is Yahoo and emails in there are ok, but I prefer Windows Live email however this will not work when downloading emails as an error message comes up saying the server is in error and one has to reapetedly click on receive emails until they are all downloaded,surely Windows email should work no matter who your provder is can someone enlight me as to why BT Yahoo fails with Windows live emails.
View 8 Replies
View Related
Jun 21, 2011
Here are the drives I have on my computer:
-Windows 7 installed on a 1TB drive
-Windows XP on a 500gb drive
-2TB drive for storage.
-1TB drive for storage
-500GB drive for storage
Windows 7 was installed before XP, and I believe XP came after the physical installation of the 2TB drive. I always have to press F8, and then select the first hard drive in the list, and then I'd be able to select to boot "Windows 7." Otherwise it'd give me "boot disk boot error, please insert system disk." The drive I'm selecting is my 2TB drive. My computer won't boot if the 2TB isn't plugged in. I've tried Option One and Two from here with no luck: [URL].
View 1 Replies
View Related
May 10, 2012
I am attempting to restore from a system image, but keep receiving a boot manager error message: Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible
The computer boots no problem normally, it is only when restarting to restore the system image.
View 4 Replies
View Related
Aug 23, 2009
I'm attempting to do an upgrade/update install of Windows 7 Professional over Vista Business. Everything checks out with the update advisor, the anti-virus and anti-spyware programs have been turned off (I have, however, left the Windows home-grown firewall on), but shortly after the temporary files have been copied and the setup begins, I received a dialog box saying that an unexpected error has occurred and that I should retry the installation.
My system is multi-boot with the first partition for Windows XP Professional, the second with Vista Business, and the third and fourth with OpenSuse Linux. I'm trying to upgrade/update the Vista partition. SP1 has been installed for Vista, and all of the updates contained in SP2 have also been installed.
View 1 Replies
View Related
Feb 26, 2010
run windows 7 on an old laptop, an hp pavilion zt1250 (1ghz, 1gb ram, 20gb hdd, dvd/cd, external wlan, xga screen, that sort of old). it isn't like a serious installation, it is more like a "post on Internet to a "windows 7 running on a nine year old laptop" or "wow your friends with your old computer running a newer os than their new one (possibly)"", and because it looks pretty darn cool. anyway, i pop in the install dvd and we get past the gray progress bar and onto "starting windows", until all of the sudden out of nowhere, just a second before the cutesy windows logo animation appears, i am instantly greeted with a blue screen saying nothing more than:
stop: 0x000000a5 (0x0001000b, 0x50434146, 0xffd0ac0, 0x00000000)
it does it on all install discs that i've tried, and it gives me the same error consistently every time. i even tried starting the installer within xp, and that starts okay, but after the first reboot where it boots the partially installed os from the hard drive, it does the same thing before it can continue. everything that is not essential has been unplugged, tried removing ram modules, on battery or plugged in, checked the extremely simple bios settings menu (you can change like three things, none of which pertain to the situation), and most other items that could possibly be covered here. this leads me to the conclusion, that since it my disc is fine and my hardware is fine (did a bios update), that the installation disc must be first modified in some way, perhaps to skip a certain unnecessary check?
View 9 Replies
View Related
Aug 10, 2012
Okay, so this just happened out of nowhere. Nothing seems to have led up to this -- the system booted and shut down successfully, and no software updates or installs were done during the period of time it was on when it was last working. I've attempted many things, but none seem to work. /ScanOs reports no OS detected, while startup repair said the OS was booted successfully. bcdedit also shows no directories linked to "unknown". CHKDSK reports no bad sectors, so such can be discarded. This happens every time I attempt to boot to Windows 7 (Home Edition, x64). I have a copy of Fedora 17 set to dualboot with it
View 14 Replies
View Related
Jun 18, 2012
I tried to boot in safe mode, it got stuck in mid boot. I tried to boot it with system repair, it said it was loading files and then it got stuck on a screen that said copyright Microsoft Corporation and had a green loading bar. My husband's laptop is exactly the same as mine, so I used it to create a system repair cd. I set the laptop up to boot from cd and tried it, but I got the same thing with it sticking on the green loading bar. I ran a diagnostics on my computer and everything passed except a hard drive test in which I got the error 2000-0146. I checked that error on the dell support website and it told me to take the hard drive out and plug it back in. I have not done this yet as the instructions to do so required me to disassemble the whole computer just to get at the hard drive. After some online research, I created a Knoppix (Linux based os) 6.7 boot cd and booted from the cd drive. This worked beautifully and I am now in the process of transferring all my important data from the hard drive to an external hard drive.
So here are my questions. Everything I read about error 2000-0146 says it's a hard drive failure but if that were the case, why does the hard drive seem to work fine when accessed from a Linux OS? Also, how would disconnecting and reconnecting the hard drive fix the problem? I really don't want to take it apart if I don't have too. Could the windows boot files somehow be corrupted causing it not to boot, and if so could I access them with Knoppix and replace them with good files
View 1 Replies
View Related
Sep 16, 2012
I receive this error regardless of the browser I'm using but I am connected to the internet; I can connect to steam and update games for example. The issue is tied solely to the inability to load websites. Mine is the only computer on the network that is displaying the issue.
View 1 Replies
View Related
Dec 8, 2011
outlook error 0x80042108b I can recieve mail from this server but not send any mail I have just set up this new work account, the rest of the poeople in the office can send and recieve ok I have uninstalled Macfee software but still no joy
View 1 Replies
View Related
Feb 17, 2010
I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
View 10 Replies
View Related
Nov 11, 2011
I started my pc,and i get this error."disk boot failure insert system disk and press enter"
Windows 7 will not load.I have the disc which i assume re-installs windows 7? Will this delete all my files i currently have on the drive?
View 4 Replies
View Related
Oct 19, 2011
Suddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option."
- Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice:
Boot 7 dvd to system recovery options command prompt. Type: Diskpart
list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition )
Sel vol C ( or sel vol 1, obviously use the correct letter or number)
act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
View 2 Replies
View Related
Apr 30, 2012
I have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies
View Related
Feb 18, 2012
"Missing operating system" massage is coming when i start my system and i am not able to start. I think because , i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
View 6 Replies
View Related
Aug 11, 2012
I had the brilliant idea to delete the manufacturer's recovery partition on my ASUS Win 7 64-bit laptop, and reclaim that space for my C drive, and now my system is unbootable. I get the error message "autochk program not found" then stop: c000021a Fatal System Error. I have run System Recovery several times to no avail. I tried to do a repair using the Win 7 DVD, but that didn't work either.
View 9 Replies
View Related
Feb 17, 2012
"Missing operating system" massage is coming when i start my system. I think because, i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
View 2 Replies
View Related
May 8, 2012
I want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party software?
View 9 Replies
View Related
Oct 19, 2012
Did a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies
View Related
Jun 28, 2011
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory
View 6 Replies
View Related
Nov 15, 2011
when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
View 2 Replies
View Related
Dec 17, 2011
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
View 6 Replies
View Related
Dec 21, 2011
I am having difficulty with drivers on my Acer Aspire 5253 system using Win 7. It is a couple months old. Within the last month, I have been getting random blue screen of death error messages in which the computer shuts down to prevent damage. The computer boots up fine without any problems. The blue screen that I see contains the same information each time.
View 14 Replies
View Related
Sep 29, 2011
i had multiple systems (3) on my computer but mainly 1 i use everyday, so i formated the two partitions with the systems i dont need after a reeboot (like i ecpected) i had a bootmbr missing error. So i went and tryed using the repair function of the dvd but that dident work. So i installed a complete new system on one of the new partitions (i left the old one allown), after i installed the new system i booted up and installed easy bcd and added my old partition to my boot manager, but after i boot up I can see the boot menu and select the old system i want to start up from but it brings an error and tells me to enter the dvd and repair the system. I am so lost on this. why istent it just taking the files and booting? what did i do wrong
View 1 Replies
View Related
Aug 9, 2012
I unistalled malwarebytes from my pc and now I am getting the following "run-time-error 53, file not found mbam" How do I get rid of that plz?
View 7 Replies
View Related
