As you've probably heard countless of times before this error has come up on my HP Paillion G6 laptop. I have tried the recovery disk to repair startup but nothing happened. I don't have a Windows 7 disk either...I need this repaired by Sunday as this is the only time I have other PCs to use in case I need to download/burn anything.
EDIT: I also forgot to mention I have no system restore points and I cannot boot last known configuration or boot into Safe Mode?
STOP: C000021a {Fatal System Error}The initial session process or system process terminated unexpectedly with a status of 0x00000000 (0xc0000221 0x001003a8). The system has been shut down.This error or any other type of error occurs when I try to run repair or if I remove my internal Cd-Rom.
I had the brilliant idea to delete the manufacturer's recovery partition on my ASUS Win 7 64-bit laptop, and reclaim that space for my C drive, and now my system is unbootable. I get the error message "autochk program not found" then stop: c000021a Fatal System Error. I have run System Recovery several times to no avail. I tried to do a repair using the Win 7 DVD, but that didn't work either.
i restarted my compure about an hour ago for it to complete a windows update, on the logout screen and showed: installing updates, it jumped from 10% to 20 and thirty and the skipped to shutting down.when starting back up again i got a BSOD saying:STOP: c000021a {fatal system error} The Verification of a knownDLL failed. system process terminated unexpectedly the system has been shut down.in the startup repair i get:startup repair cannot repair this computer automaitcally.
Problem Signature: Problem event name : StartupRepairOffline Problem signature01 : 6.1.7600.16385 Problem signature02 : 6.1.7600.16385 Problem signature03 : unkowen
[code]....
for some reason i cant find how to enter safe mode on this mobo (its a new computer)ive hit F8 and it just takes me to a boot priority. F10 11 12 arnt for safe mode either.
I just bought a new computer from Cyberpower PC and am having all kinds of trouble with it. I finally got it to work last night after reinstalling windows from the recovery disk. However, Now I am getting 2 blue screen of death messages. When I try start up it asks whether I want to "Start Windows Normally" or "Launch Startup Repair". When I select Launch Startup Repair I get a BSOD message saying Unmountable_Boot_Volume. When I launch Windows Normally I get a BSOD saying STOP: c000021a {Fatal System Error} The Verification of a KnownDLL failed. system process terminated unexpectedly with a status of 0xc0000020 (0x009224e0 0x00000000). The system has been shut down.
I have trying booting in safe mode and launching from last known good configuration and that did not work. I tried booting from the recovery disk and running chkdsk which, also, did not work. I have tried booting from the recovery disk and doing a system restore as well. When I boot to the recovery disk and select "Repair Computer" it says that "This version of System Recovery Options is not compatible with the version of Windows you are trying to repair.
Try using a recovery disc that is compatible with this version of Windows." This does not make sense to me as I just reinstalled Windows from that same recovery disc. Furthermore, when I try to boot the computer from safe mode it freezes at avgidsha.sys. I am going to try using an AVG recovery disc to disable AVG and determine whether or not that is a the problem. However, I have had so many problems with this new computer and am unsure whether it is a hardware or a software problem. And if it is a software problem whether it is a bad driver or bad copy of Windows 7.
My system is as follows: Windows 7 Sp1 64 bit Brand CyberpowerPC Model Gamer Ultra 2103 Processor AMD FX-Series FX-8150 3.6GHz Processor Main Features 64 bit Eight-Core Processor Memory 16GB Hard Drive 2TB Optical Drive 1 Blu-Ray Player & DVDRW Combo Drive
Graphics Nvidia Geforce GTX 570 1.2GB PCI Express Graphics Audio Sound card - Integrated Ethernet Gigabit Ethernet Power Supply 800W Keyboard Xtreme Gear USB Keyboard Mouse Xtreme Gear USB Mouse Operating System Windows 7 Home Premium 64-Bit
Shortcut Icons just show the >unknown< icon.I have tried to:
1. reboot in safe mode
2. move the shortut folder in and out
3. closed Explorer.exe and reopen it.
4. the last thing i've tried was to use the system restore as many say htat would help the problem. but when i want's to run system Restore it comes with the fatal error "0x80090067", so i cannot restore. WTF.
I have a FW-1082 mixer/sound device connected to a firewire pcie card, and my problem is that whenever i try to shutdown or restart computer i get a bsod. after some research on the net, i have found that i can make a net stop .bat file to stop "AudioSrv" and "AudioEndpointBuilder". However when i run the batch file for the "AudioSrv" i get a System error 5 has occurred, Access is denied, message. Can anyone please tell me how i can resolve this?
i have installed windows 7 in may sysytem a few monts ago and since then each time i install a program the program works fine but after two or three restarts it give an error that the program has stopped working and give me two opptions (1)check online for more solutions(2)close the program and when i go to more details its says that the problem name is:APPcrash
my system is a 1 GB ram +2.66 GHZ processor+80 GB HDD+an Aopen mother board
run windows 7 on an old laptop, an hp pavilion zt1250 (1ghz, 1gb ram, 20gb hdd, dvd/cd, external wlan, xga screen, that sort of old). it isn't like a serious installation, it is more like a "post on Internet to a "windows 7 running on a nine year old laptop" or "wow your friends with your old computer running a newer os than their new one (possibly)"", and because it looks pretty darn cool. anyway, i pop in the install dvd and we get past the gray progress bar and onto "starting windows", until all of the sudden out of nowhere, just a second before the cutesy windows logo animation appears, i am instantly greeted with a blue screen saying nothing more than:
it does it on all install discs that i've tried, and it gives me the same error consistently every time. i even tried starting the installer within xp, and that starts okay, but after the first reboot where it boots the partially installed os from the hard drive, it does the same thing before it can continue. everything that is not essential has been unplugged, tried removing ram modules, on battery or plugged in, checked the extremely simple bios settings menu (you can change like three things, none of which pertain to the situation), and most other items that could possibly be covered here. this leads me to the conclusion, that since it my disc is fine and my hardware is fine (did a bios update), that the installation disc must be first modified in some way, perhaps to skip a certain unnecessary check?
and this is the log that came up if it tried virtually everything, another problem was installing Net. Framework 4 which was needed by the programme I'm trying to run, kept coming up with a fatal error, but I got round this by installing the 4.5 developer preview version instead,[CODE]
So I have a laptop here and the previous HD failed. I bought a new HD and I also bought a new Windows 7 Home Edition OEM copy. As I started the Windows 7 installer and it gets to the Windows 7 splash screen, the fatal error appears.
HP laptop-10 days old with an error message from the 3rd day when I start-up the computer reading:
Mom.exe fatal error; CLR error:80004005, "The program will now terminate". I then click the ok button.
I went to the ATI website and downloaded the latest driver for the ATI Mobility Radeon HD 4200 with no luck. Also ran a system file check showing no integrity violations.
Tech support at HP recommends to run the recovery program which will eliminate all the information and programs that I have on the system bringing it to the new condition when I purchased it.
Windows 7 Home; 64 bit. Before I run the recovery program I'm searching for a solution. Also I'm not confident the recovery program will fix the problem.
I had the same problem yesterday, When I installed the game. My laptop wouldn't even switch on properly yesterday, That is now fixed and I'm still having game issues. I Installed steam then Just Cause, took about 2 hours. It said it was ready to play so I clicked played, A black screen comes up, flashes a few times, the a box comes up.
I have bought mw2 from dick smith and installed it on my computer however whenever I try to go onto the single player or multiplayer it comes up with the error "Fatal Error steam must be running" and then exits to the desktop.
Before upgrade into Windows 7 7600, I used Vista Ultimate Home Premium and installed Warcraft III in D:. After upgraded into Windows 7, I still can play the game normally, but after reinstall the game in the same Partition, i meet this problem when playing DotA Allstars in Garena. The game finished the loading, join in the game for a few minutes and...bingo...fatal error
Already updated my VGA driver, sound driver and the game into patch 1.23...etc...
i have problem on my laptop during i running a game when game start on running page and close and shown display error, There is no attachment order/file otherwise i send you a error ( Fetal error:Couldn,flip DirectX error message Unknown error )
Trying to reinstall a HP 5250 Printer/scanner. Downloaded the update package from the HP site, but it will not install and gives this error: MS VC90.MFC version 9.0.21022.8 public key token "1fc8b3b9a1e18e3b" Fatal Error MSI.netdevicemanager40 I downloaded the HP problem solver but it didn't help after many tries and reboots. I found on the web a reference to "go t microsoft and download the windows installer cleanup utility. you can click this link: www.support.microsoft.com/kb/290301 " When I go to the Microsoft link it refers only to Office - but yet other web references also point to this cleanup tool for installer.
Here is a copy of what pops up on my desktop over and over. I think it's a problem with Pogo and Java. There is more to the error message, A fatal error has been detected by the Java Runtime.
my 6 weeks old acer aspire laptop, win7 - 64bit, has started showing the message "fatal error no language file was found".i cannot get into I/E8 in either normal mode or safe mode. safe mode is good in all other aspects, normal mode is hopeless.the message appears in the middle of the page at the same time desktop opens.
I have problem with my graphic driver. Always my PC get freeze with system message : "Display driver NVIDIA Windows Kernel Mode Driver, Version 285.62 stopped responding and has successfully recovered." I can install original driver from Windows, HP (HP Pavillion dv7 PC) or NVIDIA driver - I am still getting same problem .. I found some tutorials how to fix it..like some one say use "Driver Sweeper" run it remove all drivers and install new one from NVIDIA web site. It doesn't matter what version of driver all showing it. Problem is it wont work..I am getting BIG blue fatal error where say " graphic driver isnt upgraded or something like that. I have Windows 7 64b Ultimate. My notebook is HP Pavilion dv7 with graphic card Nvidia GeForce 9600M GT. There is just something wrong with my PC or I have no idea.
In a Win7 x64 sony laptop with i7 core processor, I tried to install an HP OfficeJet 6500 E709a (not wireless).I' a computer professional and such a headec and a hell of a mess "sugestions" and clever "tips", I' ve never had it before !.I've got to say that I've read all the possible setup configurations of connectin and networking !!.What it happens is this :The first 3 phases 1.System Check 2.Preparing the Installation and 3. Installing the Softawre, are completed successfully !!!, BUT WHEN GOES TO Configuring the product (or device ?), it propably goes into a time-out loop and after several minutes it pop-out a message with FATAL ERROR SITUATION CODE : 16053956. It creates o log file (it has been sent to Hp - no reply) where, when I looked carefully, we can see this : " hpzsetup.ex -f .autorun_netwirk.inf -networkonly -Wst " cannot execute ...
Just recently my computer will not start up! This is all it says "Fatal error C0190003 applying update operation 1802 of 125622 (package...)." It just stays frozen I have to hit the power button to restart. I also tried running it in save mode and it too stops responding, this is all i see
Loading windows Files Loaded:windowsSystem32DriversNtfs.sys Loaded:windowsSystem32Driversmsrpc.sys Loaded:windowsSystem32Driversksecdd.sys Loaded:windowsSystem32Driverscng.sys Loaded:windowsSystem32driverspcw.sys Loaded:windowsSystem32DriversFs_Rec.sys Loaded:windowsSystem32drivers ....... please wait......... And nothing. Does not respond.
Alright, so I recently got Photoshop CS4 using Windows Vista, but I just want to try the Windows & Ultimate so i format may laptop change my OS to Windows 7. Not sure why, but I got the screen to accept or decline the user end license agreement, when I clicked to accept it, it just went away and nothing happened. So I uninstalled it, and tried reinstalling it, now every time I try, it gets right to the end, where it's installing Adobe Bridge CS4 and it comes up with an error saying it had problems installing photoshop CS4 and then asks me if I want to continue with the installation, I click continue, and it finishes, but I get an error message at the end again. When I click more information I get this:
Adobe Photoshop CS4 Error: Error 1603. Fatal error during installation. Adobe Photoshop CS4 Error: Error 1603. Fatal error during installation. Adobe Bridge CS4 Error: Error 1603. Fatal error during installation. Adobe Device Central CS4 Error: Error 1603. Fatal error during installation.
I've been playing Street Fighter 4 perfectly until i tried to today.
Over the weekend I had some friends over and i hooked up my computer to a projector that one of the guys brought over, so that we could game out. Everything worked fine.
But today i tried to play using my regular monitor, and i get this message;
Fatal Error
Failed resetting the Direct3D device.
Other games run perfectly (Pro Street/Grid/COD 4/ PoP)
A couple of my programs/games would not launch giving me a similiar error. After some research I believed it was a problem with .NET, well now I can't reinstall it. I've tried numerous things that have been mentioned on this forum. I'm going to copy and paste the error log that Framework gives me.[CODE]
So when I leave my computer it goes into hibernation mode, how ever when I come back it acts like its loading and then the POST comes up after that it says: "Your computer can't come out of hibernation.
Any information that was not saved before the computer went into hibernation will be lost."It does this ever time it goes into hibernation, I disabled it and I have no problems now but I want my computer to hibernate because I leave it on all day long and it will wear components out faster and waste power.I have tried updating all the drivers and hardware drivers from the website for the HD but nothing helped.
I've been having problems for a while installing this client profile.
Here's the log of the action.
CBS Log: http://www.2shared.com/file/a_VbsVp0/CBS.html Code: OS Version = 6.1.7601, Platform 2, Service Pack 1 OS Description = Windows 7 - x64 Home Premium Edition Service Pack 1
