Last night while bring windows 7 home premium down it indicate 16 upgrades. The system appears to load the upgrades and the computer shut down. This morning I turned on the computer and I get to the screen "Preparing to configure Windows. Do not turn off your computer." It has been stuck here for over an hour. How long do I let it go before I turn it off?
View 3 RepliesTrying to update manually today and keep getting a loop of blue screen death appears always at 32% of the configuring updates when re-starting up no matter how many updates are selected, which is about 40?? (100Mb)
Can get round it by running safe mode w/networking then it takes 2 cycles to remove the previous updates, I can then use as normal.
I am configuring Windows updates and it has been 7 hours and it is still on stage 1 30%,
View 4 Replies View RelatedI have been onto the Microsoft support page and followed various "cures" all to no avail. I have been into control panel and gone through the windows troubleshooting advice and it tells me that it has found and fixed problems with my Windows update and installed 9 updates. When I click to restart I get the same failure message at startup.It seems to recycle the startup procedure 3 times before it eventually gets to my desktop page, and when I look ar my update history there is a long list of failed installations.
View 10 Replies View RelatedMS keeps updating Windows 7 to ensure that we can no longer delete or reset the index.dat files. The result is that no matter what fix is posted here, MS does something to ensure the fix no longer works. Here's the laundry list of solutions that no longer work. Malwarebytes (various problems -- says file is open in Malwarebytes, is hidden and cannot be found even though Windows options have been changed to show hidden files) CCleaner (ineffective) index.dat Suite (currently completely disabled for Windows 7) index.dat suite (to find all files) combined with Eraser (to erase the files) (comes back wtih error message) Red Button (can't remember specifics here -- just that it doesn't work) Mil Sheild (can't remember specifics on this one either -- just that it doesn't work) and finally the instructions in the most recent thread on Index.dat which involve booting in safe command and going to the root file to delete index.dat. (I receive an error message that the file does not exist even though I can find 15 separate index.dat files with index.dat suite.
View 9 Replies View RelatedMy windows will never update. It keeps saying failure configuring updates and reverts changes.. I've tried Microsoft fix-it with no luck.
View 6 Replies View RelatedMy laptop is windows 7 pro.After downloading some updates, it tried to install them.The machine tries to reboot. It gets to 35% and then says failure configuring updates, reverting changes and the shuts down to restart. This cycle continues endlessly.
View 1 Replies View RelatedI have Hp Pavillian, Windows 7 Home Premium Edition, 64bit system. Everytime Windows downloads Windows updates, it is successfull downloading and installing, however, I then get a message saying: Failure configuring Windows Updates, Reverting Changes, Do Not turn off your computer.
I have gotten Windows Fixit for Windows Updates and installed....but that does not clear up the problem. I have not wanted to use Restore feature of Windows 7, since I have installed many critical programs that I use. Is there any other solution out in Cyberspace that will help resolve the "Failure Configuring Windows Updats".
For the past day windows wants to install the same 4 updates over and over, I have windows update set to download and let me choose when to install.
I can't understand why I even need them, as I uninstalled net framework. Notice how the update at 8:17 AM., KB2656368, is the same as one of the 4 updates installed at 7:47 PM. Windows wants to install the same four kb files again.How do I stop this?
Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368)
Installation date: 6/15/2012 7:47 PM
Installation status: Successful
[Code].....
The Windows 7 Firewall provides a basic level of protection against hackers as soon as you start your computer up. Although the firewall can be configured to filter both incoming and outgoing traffic, by default it only acts like the firewalls in Windows XP and Windows Vista, that is, it will only filter incoming connections. Configuring the Windows 7 Firewall to filter outgoing traffic is a little easier than it was in Windows Vista but is still a complex process and is not covered in this tutorial.
This video tutorial demonstrates the most common configuration options for the Windows 7 Firewall and discusses when you might need to use them. If you need to turn off the Windows Firewall for any reason, the video will also show you how to do that. Finally, we'll also show you how to access the advanced options for the firewall, although these options are not covered in this tutorial.
I have 5 updates that fail to install. I have also tried to manually install them, but they still fail Here are the updates:
KB2586448
KB2572076
KB2564958
KB2567053
KB2579686
The error code I get is "800736B3". I ran MS FIXIT and it said they did not detect any problems.
resume configuration restart computer" i have more than enough to install this is a clean install on a 60 gig PATA HD. my pc is a P5N-E SLI asus MB.. 8800gt 512 MB video card. 2 gig pc6400 ram.. and theprocessor is e6850 dual core. so what gives?? i get no other info other than listed and when i reboot i get the same message?
View 9 Replies View RelatedSo I created an image earlier this week, sysprepped it and captured it after restarting the computer.Settings were OOBE / Generalize / Restart.When the computer had finished capturing the image to deploy studio, it restarted and went through the normal 'first run' procedures, but stopped during the configuration process saying:"Windows could not finish configuring your system. Restart the computer to try again" or something similar.I had a look at an earlier thread on here but the answer was similar to 'If you sysprep more than 3 times now it won't work'.
View 2 Replies View RelatedDue to some problems I was having with updating windows, I decided to recover my HP computer to its factory condition using HP's Recovery Manager.I don't have a recovery disk, so I chose to recover from the recovery partition on the hard drive. I chose to not do a backup and the recovering process went fine. After it was done, I was asked to restart my pc and once it restarted, I was at a black screen which said something along the lines of "setting up devices". After a couple of minutes, a small window showed up with the fallowing message:"Windows setup could not configure windows to run on this computer's hardware." This window shows up when the black screen says "Setting up devices". I press ok, then the black screen says "setup will continue once your computer is restarted". The pc is restarted automatically and this window shows up again.At first, I had unplugged an external USB hard drive and an external wifi antenna, leaving my monitor, mouse, and keyboard plugged. But, after doing some research, I found that some hardware installed inside the pc might also be causing the problem. So, I removed the wireless card, disconnected the DVD drive, and disconnected the cable from the USB and analog ports of the front panel. The only things that were connected (as far as I saw), were the fans, motherboard, power button, and the only hard drive. I went back into the recovery manager and did the recovery again, once it was done and the pc restarted, I was brought back to the same message.
View 2 Replies View RelatedRecently bought a 2tb storage drive and I'm using all 6 sata ports on my mainboard! I've got a 74gb raptor that's got windows xp dual boot with my main os windows 7 though windows 7 is on another drive! I want to remove the dual boot as I don't need windows xp anymore (do I?) the thing is the raptor is my first boot device that gives me the option to boot into windows 7 or xp and if I select the windows 7 as my first device it just comes up with the error can't find boot device so there must be a config file on the raptor 74gb that I need to move to allow me to boot from the windows 7 drive and remove the raptor to use my new drive! Any advice on how I can do this as any software that I could use?
View 6 Replies View RelatedMy computer will not let me connect to the internet using a wireless connection. My router and modem are working. I can connect to wireless using another computer. How do I reset my configuration back to factory settings?
View 2 Replies View RelatedI ran the lastest Windows updates on my PC and when it rebooted it was stuck on the "Configuring Windows do Not Shut Down" screen for hours. Finally, I shut down and the PC would not start up. I tried to do a system restore to before the Windows update, and got errors. However, the PC did start up (and actually said the restore worked), but not everything is functioning correctly on the PC (there is no HDMI sound for example and Google Chrome Updater will not connect to the internet). I tried to do another system restore from within Windows and got the error message in the attached screen shot.
View 2 Replies View RelatedI ordered a refurbished/reconditioned Packard Bell EasyNote TJ74 laptop from a very well known retailer in the UK called Currys. I received it two days ago. Initally, the laptop stayed on for all of about 5 seconds before shutting down, however I have solved that problem by Googling the text and looking here: pxe-e61:media test failure check cable. It was basically trying to boot from something other than the HDD itself, so I set the HDD to the top of the list in the BIOS.Then, the next problem I got was this: I get the "Windows is Starting..." screen, and then a setup services starting message, and then this:"Windows could not finish configuring the system. To attempt to resume configuration, restart the computer."I restart the computer and... nothing happens. No Windows installation/recovery disk came with the laptop.So, I set the laptop to boot from CD in the BIOS and, using a 64-bit edition recovery disc I found online and ran startup repair using it, apparently no problems were found, and I got a message about ensuring I didn't have any cameras etc. attached... ..Someone online recommended I disable digital driver signing, so I did that by pressing F8 at one point when it was booting... it doesn't seem to have made any difference. Safe mode doesn't work either.Currys have told me they can do nothing but send a courier to my house to pick up the laptop... I don't get a replacement, simply a refund. I needed this laptop for Monday as I start university.I've set it back to boot from HDD and I'm getting the "Windows could not finish configuring the system, please restart" message again and again and again, and the system just constantly restarts and the same message appears. It is a never-ending loop!
View 4 Replies View Relatedi need to know where all the settings are that might shutdown/power off my PC.Already i have found and changed:
settings that power down my wireless network usb and harddrive - off
ability to power off all usb ports - off
sleep mode - off
i have made max remote access 30days. what are some other settings that may suspend or logoff or power off my pc and stop it from downloading?
Windows Updates continues to re-install five specific updates which are:*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2604121) -Download size: 38.5 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656368) -Download size: 1.8 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2656405) -Download size: 11.7 MB.*Security Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2686827) -Download size: 4.3 MB.*Update for Microsoft .NET Framework 4 on XP, Server 2003, Vista, Windows 7, Server 2008, Server 2008 R2 for x64 (KB2600217) -Download size: 32.2 MB.- I purchased my computer 4 to 5 months ago. It is a Windows 7 Home Premium Hewlett-packard HP Pavilion dv6 Notebook PC (64-bit Operating System).
View 3 Replies View RelatedFor a while now I have been experiencing a strange problem. My laptop keeps changing the Windows Updates without my consent. I know this has been raised in the past but my problem is slightly different.I prefer to choose "Check for updates but let me choose whether to download or install them", however periodically the settings change without my consent to "Never check for updates".This is very frustrating as I am constantly having to keep an eye on this, and change the settings back to what they were in order to receive critical updates, or indeed any other update.The laptop was bought new just under 12 months ago and came with Windows 7 Home Premium 64Bit pre-installed.Has anyone else experienced this, or can anyone advise on a fix?
View 9 Replies View RelatedMy wifes computer has been acting up for about a week now. IE 8 is not loading properly and is crashing. I am unable to connect to MSE to get updates or to Windows to get updates. I have run Malwarebytes and Emsisoft and neither one can find a bug. Chrome works for a while and the she gets the AW SNAP message.
View 26 Replies View RelatedI think I may have messed up some folder access permissions between my two user accounts on my laptop. I have two user accounts: Owner & PersonalOwner is being used for everything, while Personal is now being used for gaming/torrenting.y father likes to use my computer fairly often now and I dont want him to be able to snoop around all my folders on both accounts. Both accounts are adminstrators and are password protected. I tried to change permissions myself and messed some things up. Now my Owner user account cannot access the Personal user folder. It says access denied and to see the security tab of the folder.anting to do. I have seen it set up on one of my friends computers how he was able to lock his user folders but still access them from opposing user accounts via entering the password when it was prompted, similar to inputing the password into UAC window when you want to change things..
View 3 Replies View RelatedI'm running Windows 7 Home Premium x64, trying to install service pack 1 thru windows update. First time I tried to install along with some other updates and it failed to download. Second time I downloaded on its own and it installed fine. Computer then restarted and displayed 'Failure configuring service pack. Reverting Changes'. Now it keeps restarting and doing the same thing over. I can't access my computer while this is happening.
View 3 Replies View RelatedHow do you configure windows so it does not constantly delete your passwords which you enter. It gets rather madning when you log into a site you use constantly and even though the "save" button is clicked you end up putting in the information the next time you boot up the computer. Also is there any way to turn off the security pop up box which always is asking do you want to view information from such and such site on sites you have logged into and use constantly.
View 3 Replies View RelatedI have upgraded my laptop from Vista to Windows 7 and since installed 91 updates. Service Pack 1 installs but then fails to configure. I have tried so many different ways to sort this, all without success. I even tried to install and configure in 'Safe Mode' but it made no difference. I cannot install my printer drivers and I am hoping it is merely because of the lack of SP1 being installed.
View 3 Replies View RelatedEach time I launch an MS Office Enterprise 2007 application (such as Word or Excel) MS Office "Configures" itself for 2-3 minutes before allowing the app to open. In a possibly related issue, MS Outlook refuses to allow me to set-up ANY e-mail accounts. I am running a 64-bit version of Windows 7, and have run ALL Updates for Windows, and ran the Service Pack 2 for MS Office 2007.
View 1 Replies View Relatedmessage after Sysprep stating "Sysprep Fails After Deployment With: Windows could not finish configuring the system."This is a new out-of-box Lenovo T530 laptop, it came pre-loaded with Windows 7 Pro.I pulled laptop from box and inserted our Windows 7 Pro SP 1 disk and installed our copy. I then configured all settings and applications under "audit mode", created an "Unattend.xml" file using the WSIM, and copied that file into the Sysprep folder and ran "Sysprep /shutdown /oobe /generalize /unattend:unattend.xml" The error message appears after I image drive using Ghost GSS 11.5.1.2266. (I'm assuming the error would appear after boot-up regardless of imaging the machine)I have read numerous articles regarding this error and have also disabled the "Windows Media Player Network Sharing Service" as suggested by many. I'm also assuming that the "Hotfix" for this issue does not apply since I am installing SP1.I am able to boot into the machine after attempting to boot into "safe mode" first (as suggested by many users), however once in, it looks as if the XML file is completely ignored.
View 5 Replies View RelatedI am trying to put microsoft office 2007 on my laptop rumming windows 7 pro. I have the files on the computer but when i try to open word, excel, powerpoint etc, it says the operation system is not configured to run them
View 4 Replies View RelatedI did search out this problem...very old posts recommended I start a new thread.For the last 2 weeks every time I shut down automatic install...installs the same 8 updates.
View 9 Replies View Relatedfor 72 hours now im geting constant updates on windows update,windows even re instaled SP1 ...story goes my hdd broke down 3 days ago so i installed on a new hd win 7 home prem. x64 +sp1, since that time i had at least 5 hours of updates (inc. setup),funny thing is a friend did format on his pc today and we spend 3 hours updating (dont think he finished, instead he went to sleep) My q is (as stated above) is there a reason for the 34/72/4/3/2/1/silverlight new updates found????? did Windows 7 went unstable???its rly anoying (got some failed updates to)until 3 days ago i had no probs.
View 4 Replies View Related