Failure Configuring Windows 7 Service Pack - Reverting Changes
Mar 30, 2011
I'm running Windows 7 Home Premium x64, trying to install service pack 1 thru windows update. First time I tried to install along with some other updates and it failed to download. Second time I downloaded on its own and it installed fine. Computer then restarted and displayed 'Failure configuring service pack. Reverting Changes'. Now it keeps restarting and doing the same thing over. I can't access my computer while this is happening.
View 3 Replies
ADVERTISEMENT
Aug 19, 2011
I have upgraded my laptop from Vista to Windows 7 and since installed 91 updates. Service Pack 1 installs but then fails to configure. I have tried so many different ways to sort this, all without success. I even tried to install and configure in 'Safe Mode' but it made no difference. I cannot install my printer drivers and I am hoping it is merely because of the lack of SP1 being installed.
View 3 Replies
View Related
Nov 19, 2012
I have been onto the Microsoft support page and followed various "cures" all to no avail. I have been into control panel and gone through the windows troubleshooting advice and it tells me that it has found and fixed problems with my Windows update and installed 9 updates. When I click to restart I get the same failure message at startup.It seems to recycle the startup procedure 3 times before it eventually gets to my desktop page, and when I look ar my update history there is a long list of failed installations.
View 10 Replies
View Related
Jan 10, 2013
My laptop is windows 7 pro.After downloading some updates, it tried to install them.The machine tries to reboot. It gets to 35% and then says failure configuring updates, reverting changes and the shuts down to restart. This cycle continues endlessly.
View 1 Replies
View Related
Sep 18, 2012
i get the same error message over and over again when i try to install service pack 1 on my windows 7 ultimate 64-bit, and if you leave it running it will bsod as soon as windows starts, i'm not sure what information to put on here, but i've tried nearly everything that there is to try, but nothing will fix.
View 1 Replies
View Related
May 17, 2011
I went to Microsoft Update. I was installing SP1. On shutdown (and now on boot) I just get the "Configuring Service Pack, 8% Complete, Do not turn off your computer." When I went to bed it was at 8%, when I woke up it was at 8%.Luckily I have an Ubuntu dual boot. That allows me to post this message.Is it even possible to do a system restore (restore to a past restore point) now?
View 3 Replies
View Related
Feb 1, 2012
My system tells me that an update is ready for installation. It turns out to be Service Pack1 KB976932. It loads and installs. On reset, the system stalls on �Starting Windows� with that fuzzy MS colors icon on the screen. 10 minutes later I press Alt,CTRL,DEL� nothing happens. I press NumLock, no light change, so I do a hard reboot.��Launch Start Up Repair� is reported. Then �Unable to Start, Searching for problems� as the progress bar indicator sweeps across. It times out and asks �Do you want to Restore�, I hit OK and the progress bar indicator sweeps across again. This goes on for about 15 minutes.�Cannot Repair Automatically� and when I hit OK, the system turns off.On redstart, it boots fully and is probably in the same arrangement as before this whole session. This is the third time I have run through this process.
View 2 Replies
View Related
Feb 27, 2011
I downloaded the service pack last night. It installed with no problem. Sort of embarrased to say this, but I have been unable to get into Farm Town on Face Book today. It's the first time I tried since installing the service pack. This has happened on both the desktop and laptop. Both are Windows 7 64 bit.
View 1 Replies
View Related
Sep 2, 2012
My windows will never update. It keeps saying failure configuring updates and reverts changes.. I've tried Microsoft fix-it with no luck.
View 6 Replies
View Related
May 24, 2011
in my list of updates since it was released. However I have put off installing it until the reviews were in.Last nite I decided to bite the bullet and do the install,and lo and behold SP1 is nowhere to be found in the list of available updates?Also checked update history to be sure it didn't get installed sneakily nowhere to be found?Spent sometime on the internet looking,but could find nothing addressing this.Where do I get SP1 now? Microsoft website?Why is it gone from the update list?
View 17 Replies
View Related
Jul 26, 2011
Tried to download twice but it only goes half way.
View 4 Replies
View Related
May 6, 2011
Is anyone else having problems getting the new service pack for Windows 7 installed? I keep getting an error towards the end of the installation. I dont rememeber the error code but it happed on both my laptops I tried to intall it on.
View 2 Replies
View Related
Jan 26, 2012
I never realized it until just now, when I looked through Windows Update. It's been trying to install the service pack update about a hundred times behind my back since LAST JULY. and every time the status is "Failed."
I had checked because I just installed it last night again and shut down my computerr and everything seemed fine. Then this morning I noticed the windows update icon in the taskbar and saw it again even though I just installed it last night and noticed all the failed installations
View 5 Replies
View Related
Aug 10, 2011
I get Error Code: 0x800f0826.
View 6 Replies
View Related
Aug 26, 2011
I have a PC running windows 7 64-bit and I am finding it impossible to get windows 7 Service Pack 1 (SP1) to install. I start the installation and it seems to run for more than an hour and appears to be installing OK; but when I restart the PC I get an error saying that the installation was not successful and it the rolls back to where it was before I started the installation. I have tried to install a numbr of times, but without success.I have also tried:
* Stopping all non-essential start-up items by disabling them booting on startup using msconfig.
* Stopped all firewall and anti-virus from running during installation
* Run the Windows Update System Readiness Tool (kb947821) before the installation
* Run the Windows Update troubleshooter
* Running the installer from within Windows Update, as a standalone x-64 bit installed downloaded from Microsoft, and as an iso file burned to a DVD
* Run sfc.exe /scannow which reported no errors.
Other Windows Updates seem to install OK - it is just the SP1 update that refuses.[For info: I have another PC that I recently updated (clean install) from XP to Windows 7. I had a similar problem on this PC after I had performed all the other Windows Updates and instaleld my normal suite of programs. SP1 also refused to install. In the end, I reistaleld Win 7 from disc and then immediately installed SP1 before installing any other updates or programs. SP1 installed OK. However I do not want to follow this route on my main PC as it has a load of programs installed which will take a few days to reinstall if I have to start from scratch].
View 6 Replies
View Related
Nov 11, 2011
I am Still Finding Out how to Show my IDE Hard Disk (Samsung SP0842N)But when I start the Setup, It Redirect to the Load Driver.What Should I Do to Install Windows 7 from my IDE DVD-ROM to IDE HDD?
View 6 Replies
View Related
Sep 12, 2011
I just got Windows 7 Enterprise N about a week ago. It is for my computer networking class, our teacher also gave us a bit more other software and I am trying to find out what I am doing wrong. I have installed and ran the precursor software from microsoft.com to make sure that my computer is able to use SP1 and I don't have any problems in my registry. It is an official, licensed version and registered, and all the other updates work. I have manually downloaded and tried to install it and still nothing. Where do I start on troubleshooting this?
View 8 Replies
View Related
Sep 14, 2011
I was updating neighbors PC last night and when I tried to install the windows 7 service pack from windows update at the end of the install it would say it failed then when I rebooted the pc it would say configuring windows and when it reached 32% it would stall and then say it was removing updates and reverting, then it would reboot, do the same thing, reboot and do that cycle like 6 times before windows would actually load up like normal. It happens if I download the .exe version or I try to get it from windows update.
Its a dell pc (forgot the model but its newer has a core i7 860 in it). Has windows 7 ultimate 32bit on it.
View 2 Replies
View Related
Mar 9, 2012
Is it possible to install the service pack on a laptop without having it plugged in?I have tried the stand alone update and thru windows update. Keeps saying to plug in my power cord.
View 5 Replies
View Related
Dec 9, 2012
Auto sync launcher needs reconfiguration using service pack 1.
View 1 Replies
View Related
Nov 29, 2011
Every time I rebooted my laptop windows runs through preparing to configure windows, then configuring the service pack, starting at 35% and finishing on 37% and then boots windows normally. This is very annoying to go through everytime I reboot. I ran the portable fix it program from microsoft to fix windows update problem but it I booted into safe mode to try uninstall the service pack to reinstall but now when it reboots it says preparing to configure windows, then failure to configure service pack, reverting changes. Now it does this every time.I've tried running windows updates to try to reinstall but it just seems to go on forever. I have also run the System update readiness tool from microsoft but it does the same as the windows updates, runs continuously
View 3 Replies
View Related
Mar 13, 2011
I noticed that after installing SP1, when I subsequently went to run Disk Cleanup, I had 920 Mbs of "Service Pack Backup Files. Upon searching the web as to whether I could delete these 920 Mbs of files with impunity and whether I should, there were many differences of opinion. Since I have often been guided by Tech Support Guy, I thought I would solicit the opinion of all of you. While I do not really need the extra space that removal of these 920 Mbs would provide, since I have 54% of free space, I am just uncomfortable with what I believe may be unnecessary files hanging around on my computer.
View 3 Replies
View Related
Apr 24, 2011
After I reinstalled it, and went on to update the W7 SP1 a strange noise came out of my machine just as it began installing it, and then it seemed like my hard drive crashed, so the PC became unresponsive and I had to shut it down by holding in the button (it tried to recover files when I started it up again, hence my hard drive problem theory).I've since reformatted my machine five times and the exact same thing happens, everything, including hard drive works perfectly until I get to installing Service Pack 1.
View 8 Replies
View Related
Apr 29, 2011
I need to uninstall every update that followed service pack 1, because they have all been causing me problems
View 5 Replies
View Related
Mar 13, 2011
I cannot install the Windows Service Pack 1 on my Windows 7 notebook. I have attached a picture of what it shows after failing to install the service pack after restarting the computer.
Upon clicking the "Go online..." link, I have followed the steps exactly as shown here: [URL] The service pack still fails to install.
View 4 Replies
View Related
Nov 29, 2011
Every time I rebooted my laptop windows runs through preparing to configure windows, then configuring the service pack, starting at 35% and finishing on 37% and then boots windows normally. This is very annoying to go through everytime I reboot. I ran the portable fix it program from microsoft to fix windows update problem bI booted into safe mode to try uninstall the service pack to reinstall but now when it reboots it says preparing to configure windows, then failure to configure service pack, reverting changesNow it does this every time.I've tried running windows updates to try to reinstall but it just seems to go on forever. I have also run the System update readiness tool from microsoft but it does the same as the windows updates, runs continuously
View 7 Replies
View Related
Jun 7, 2012
Any idea when windows 7 service pack 2 will come out. Will jit ust be a standard update. or a service pack with some new features I such as where windows can reinstall a fresh copy of itself which is a feature in windows 8 comming out. What version of internet explorer will be included in this service pack.It must be 200 updates since service pack 1 so I wonder how service pack will be different from what i have now.
View 9 Replies
View Related
Jun 29, 2012
Recently I worked with the tech support at McAfee when I couldn't install my updates or virus scan my Aspire one netbook.I was told that McAfee was fixed but will not run until I pay them $179.00 to fix my Windows 7 Service pack which is apparantly missing a file. They called it an error in attribute record and said the error is inthe operating system of my computer.
View 1 Replies
View Related
Feb 3, 2013
I have a brand new laptop with Windows 7 Home Premium 64bit pre-installed on it. Some of the programs that I paid big money for that I ran on Windows XP service pack 3 32bit won't install. Is there are way around this problem?
View 14 Replies
View Related
Mar 28, 2011
Is there any way I can check what is see what is preventing Service Pack 1 KB 976932 from installing on my laptop? My laptop is running fine, all other updates installed normally. Don't know whether its a related issue or not but when I connect my Samsung Galaxy S to my laptop via USB, I get MTP driver install failure.
View 9 Replies
View Related
May 29, 2011
I have Win 7 Ultimate 32-bit. I have never had SP1 before. I recently used system restore to roll back a few days and now when I try to install have Win 7 Ultimate 32-bit. I have never had SP1 before. I recently rolled back my PC a few day with system restore, then updated Windows to the newest updates. I downloaded SP1 32-bit and when I try to install it, it installs right to almost the end and gives me: Error 0x80070002.
View 1 Replies
View Related
