How would one go about doing a network install of windows 7, the machine I'm on has no dvd, my usb stick is missing, and I don't wanna run an install from inside windows to a separate partition cause I don't the new install of windows 7 seeing "d:" as it's main directory.
View 3 RepliesI have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
I am having an apparently common problem: my Windows 7 machine can access my XP/SP3 laptop just fine but though the XP can see the Windows 7, it can't access it at all. What I get is...[Windows 7 machine] is not accessible. You might not have permission to use this network resource... yada yada yada.
I've looked up the topic and this phrase and find lots of answers, some ridiculously complex (registry hacks?), most of them contradicting each other. Nothing I've found offers a step-by-step how-to.
I'm one of those who skipped Vista, so I'm not familiar with all the new security. When my home network was all XP, I just connected a computer to the workgroup, gave folder permissions, and go. (I don't use passwords.)
So how do I do it now?
There are/will be a lot of us moving to 7 straight from XP, and we need some sort of "you used to do this, now you must do this" type of guide.
This problem has become progressively worse.
It started out months ago, when ever I would try to do multiple things over my network connection on my Windows 7 machine, the network connection would just die, and I'd have to disable/enable my LAC to get a connection again.
This included opening up too many tabs in firefox, or trying to stream music off my other PC, play a game, use vent, and web browse etc. It seemed to be linked with the # of active connections I had.
Well now it's doing something entirely new, and I need help. When ever I try to do anything streaming, it's just not responding. It sets up the initial connection, downloads a little bit, then just stops responding. I can still go to web pages and load them easily (provided they're not large pages), but if I try to watch a video, it only loads parts and doesn't play.
I tried running the Pandora app I've used up until today without issue, and all it does is open, load the song, then stop. I tried streaming audio off my other PC, and all it does it load the play list, but doesn't play.
What is Best Non-MS Network Monitor for Windows 7?
OK... before half of you suggest Perfomance Monitor in Administrative Tools, I'm looking for something easier to use and preferably something that can measure both wired and 802.11x speeds and throughputs.
I just got Windows 7 Ultimate for my desktop, and I need to set up a network via Ethernet cable & ASUS 8 port Ethernet Hub with 2 other Vista laptops.
OK, all of the computers are connected to the Hub.Now I have to run a network wizard or something, and I want to do it from Windows 7(desktop).
What are the steps that I need to follow ? Help anyone ?
I am wondering which network to purchase so that I don't have driver issues with win 7.
Anyone know a good card?
For all the apparent attention to backward compatibility that MS says they put into Windows 7 I find that a Mixed Windows 7 / WinXp network is really problematic.
I am able to network Windows 7 MyDocuments without too much problem, though not as easily as a Windows 7 / Windows 7 or a WinXP / WinXP network. I am finding it impossible to connect to a second disk on my Windows 7 computer from an XP machine on my network. I can "see" the 2nd drive but am prevented from connecting ("blah, blah is not accessible, contact network administrator...").
One thing I have noticed from perusing this forum is that some people are having problems connecting from XP to 7, while others can not connect from 7 to XP. No consistency that I can see, which is cause for pause in my books.
The sharing permissions are set on the drive.
I hope the problem is mine and not systemic, because if anything is a Windows 7 deal-breaker would be it. Multi-computer organizations are not going to migrate their computer to Windows 7 en-mass, rather one computer at a time.
Any illumination on this problem will be greatly appreciated.
I just upgraded my fileserver to 2008 R2 (clean install) and also upgraded my home PC to Windows 7 (also a clean install). Both are connected together using a linksys 8-port gigabit switch and each machine has 2 NICs which are bridged. The server has a static IP and the workstation currently has a static IP as well (although I've had it set for DHCP and the problem still occurs). Network Discovery is enabled on both and they are both in the same workgroup.
Now with that being said, here's the issue.....
Periodically, the workstation no longer can "see" the server if I try to browse the network. However I can still ping the server by IP as well as name, browse fileshares and even RDP into it. The only thing that is affected is if I'm using a program on my PC and need to access files that are on a network share, then the server isn't listed under network to allow me to browse to the share.
When this happens, I can usually reboot the server and then it will show up, but there seems to be no set pattern as to when it will disappear. If both machines are left on and not rebooted, the server sometimes will just show up under Network for awhile and then disappear again. One final note, on the server, the workstation does show up when browsing the network.
I have all my printers connected to Windows 7 machine. I have an Xp machine connected via home network that I want to use the printer(s) over the network. Once I get the printer network connection established, it works fine except when I shut down the computers and restart them the next day. Even though the desired printer is showing "ready" on my Xp machine, I cannot print to it.
I believe that the Windows 7 machine is changing the printer Share name some times as I found out today. Once I make sure all names etc are the same and re-booting both machines it seems to work once again. Today I had no luck until I went to go to the shared file folders on the Windows 7 machine, Windows 7 asked me for sign in/password, then the printer started working.
I need to fix this, got something not configured correctly? Should not matter what machine is turned on first to get both machines networked together?
I have installed Windows 7 on a new PC and been playing around with it for a couple of days.
I have added it to my home workgroup and shared out some folders. I have turned off Windows firewall, however if I try to view the shared folders from other machines (XP) on the home network I get asked for a login and password.
Yet if I browse the other XP machines from the Windows 7 machine I can see all their folders. I can't find a setting anywhere that would seem to address this!
Should I install Windows 7? If so, which build, and does it have any bootable ISOs? I would preferably like to install something that I won't have to replace with a newer build later, but I see that probably won't be possible unless we get an official update on the RTM soon.
View 9 Replies View RelatedIt gets to starting windows. "second screen of install process" then I get the Blue Screen Of Death.
STOP: 0x0000001E (0xffffffffC0000005, 0xFFFFF8000BCE9E324, 0x0000000000000000, 0xFFFFFFFFFFFFFFFFF)
Or it just resets the computer. I have tried everyting. This is a new computer built by me with the first time an operating system has been put on it.
So, I have an interesting problem with installing Win 7 from XP. I'm doing a full install over the old XP drive.
I have an unusual hardware configuration. I have 2 HDD's, one is SATA, and the other is on a legacy IDE. The SATA drive is a WD Raptor which I use for the OS and the IDE is a slower, larger drive I use for storing data. Additionally, the IDE drive is the Slave on the IDE chain. In XP, this worked great, because the system would boot to the SATA drive and I could use both drives.
When I went to install 7, both drives appear in the list, but their letter names were reversed: the OS drive was listed as "D" and the data drive was listed as "C". I didn't think much of it until later. I installed on "D" which was the SATA drive. After install, I noticed that my IDE drive wasn't listed in file explorer.
So I opened the Disk Manager and found that both drives were listed, but only the install disk was active. However, the IDE drive was Disk 0, and the SATA drive was Disk 1 and labeled "C:". I activated the IDE drive and it became "E:" (the DVD-ROM was already "D:"). I attempted to reboot and got an error "BOOTMGR is missing". If I put in the Win 7 install DVD it will boot to the SATA drive.
I read some of the other threads here and attempted fixes using "bootrec.exe" to no avail. I finally decided to reinstall again on the SATA drive. Again, 7 listed the SATA drive as Disk 1/"C:", and the IDE drive as Disk 0/(no letter). This time, I didn't activate the IDE drive and tried to reboot. New message "No system disk...". Put in the Win 7 DVD and it boots to the SATA drive.
My current theory is that Windows 7 is getting confused about the drive ordering when creating the boot sector on the drives. I ran out of time last night, but I thought I would unplug the IDE drive and do a fresh install on the SATA drive, then plug in the IDE drive after things were booting normally.
I did check the BIOS settings, and the SATA drive is listed first in the boot order.
ASUS M2N-SLI Deluxe
AMD 4200+ CPU
OCZ 4GB RAM
(IDE) Hitachi 320GB
(SATA) WD Raptor 120GB
nVidia 7600GT
Can someone offer some advice on how to solve this so I don't need the Win 7 DVD in all the time?
Want to install Windows 7 on second drive....How?
I am currently on Vista which is on C: drive, and I want to install Windows 7 on F: drive.
How can I do that?
Also how will I select which Windows I want to log on to?
I am planning to buy windows 7 within 2 weeks. I am currently using windows xp.
My computer specs is
Processor : pentium-4 2.93 ghz
Ram : 632 ghz (512+128)
OS : WIN XP
Hard drive : 80gb
Screen res:1024x768
I partitioned my hard drive into 4 (c,d,e,f), C drive contains Windows Xp and each drive is with 7.5 gb stored.
I want to keep my xp as it is and i want to install windows 7 also.
Is is possible to partition my drive and use it for xp and windows 7, if so pleaseee help me or specify any perfect tutorial on the web.
I upgraded from vista ultimate to Windows 7 using Dell supplied upgrade disks. This was a mistake because either I had previous problems I did not know about or the upgrade injected some. Now I have a brand new retail Windows 7 Ultimate upgrade disk.
Any recommendation as to the method I should use to install it would be appreciated. If I do a normal upgrade over what I have now I am afraid I might have the same problems still there. I can't format the C: drive as it is the system drive. Any suggestions?
I have an older computer that is or was being used for Win XP Pro. I put a new hard drive that is partitioned with 25gb on the C drive with two other partitions of different sizes. I set the the hard drive as cable select (later tried as Master only)
Windows 7 in cable select saw all the partitions. When set to Master it only saw Partition 1 and the rest as unallocated which seems weird.
I have the boot order in Bios set as Floppy, CD Rom and then Hard Drive.
I have an external usb DVD reader for the install disc.
When i start the pc, then press to boot from CD, it sees the install disk and the install process starts. I get to the point to select where to install and I get this Notice:
"Windows can NOT be installed on to Disk 0 Partition 1"
I hit the more info button and get this notice:
"The computer hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the BIOS Menu."
It should boot to the hard drive the way I have it setup. At least it does for Win XP.
I was wondering if anyone has any suggestion as to how to get around this issue.
I want to install windows 7 ultimate on a second 32-bit computer. How to do it legally?
View 2 Replies View RelatedI have a HP m7667c, which has two SATA drives. The motherboard is ASUS P5BW-LA (or Basswood-UL8E). I've never successfully installed vista before because of it kept asking for SATA drive. I wonder if there is a solution for this problem with Window 7?
I think I have RAID on in the BIOS configuration but I don't really want to turn it off because in that way my old WinXP would die. I just wanted to give Windows 7 a try before I completely change to it. Could anyone help me? I could provide more information about the desktop if necessary.
i see a lot of drivers pack for win 7, is it neccessery to have a driver cd installed with win 7, or it's enough if i have the drivers for my hardware as win 7 compatible, so is there any need for that extra drivers package cds if i have the right installer drivers?
View 7 Replies View RelatedOk so I got an MSDN membership for my birthday (Thanks Dad ) and I'm now downloading Windows 7 Ultimate 64bit.
I wanna know if the drivers are automatically found or if I need to download them and put them on a flash drive first.
Can someone please explain how this works? like where does it put the files etc and can i install the latest NVIDIA drives through the load drivers option during windows 7 install?
View 1 Replies View RelatedI'm currently using Win 7 RC 32-bit on this comp, and am looking to move to 64-bit by the time RTM comes round.
My question is - everything except my scanner has 64-bit drivers. There is this program that included 64-bit compatibility with a large number of scanners, and mine is listed.
Is there anyway I could install a second Windows 7 on a third partition (of this same hard drive), and try the driver with that to check it works? As I understand it you can't test drivers etc. in a VM install.
This morning I attended a Windows 7 Launch developer presentation as part of the New Efficiency. We were given copies of Windows 7 Ultimate at the end of the presentation, however I was disappointed to find it was only 32-bit. It says so on the disc.
My question is, is there somewhere I can get a hold of a copy of Win 7 Ultimate 64 bit (say, a download site?), and install it with my CD key I was given? Also, am I right in assuming that my CD key will work for both 64 and 32 bit?
I'm currently running Vista Home Premium 32-bit.
I'm going to buy Windows 7 Home Premium 32-bit upgrade.
I want to do a clean install on a new hard drive I just bought.
I'm going to put the current Vista hard drive on SATA 1
The new hard drive for Win 7 will be on SATA 0
I can't figure out what procedure to use so Win 7 Upgrade sees the old activated Vista to activate Win 7.
In short, I want a clean install via Win 7 upgrade media on a seperate hard drive.
Can anyone help with this?
i have a Sony Vaio VGN-CS325J that comes with Windows Vista Home Premium x64,now i am going to install windows seven x64 on my laptop but i don't want to lose my vista as a matter of fact i want to have dual boot win vista & seven.
is it possible?
(my Vista is installed at Drive C and i have an empty Drive that is F with NTFS file system and 50GB space).
I want to encrypt my hard drive with TrueCrypt, but it comes up with an error saying that "Windows is not installed on the drive from which it boots". I just reinstalled Windows 7, so it wouldn't be a huge loss to install it again in the same day, but when I install it, how do I make Windows install on the boot drive? When it came up with the partition prompt, I formatted the partitions (there were two) and then deleted the partitions and made it all unallocated space. Should I put one partition on first?
View 6 Replies View RelatedSo I was not sure about Windows 7 and I have a PC with 2 physically separate internal hard drives. So I retained my vista OS on my C:/ drive (named OS) and did a clean install of windows 7 (using an upgrade disc student edition) on my D:/ drive (DATA).
After setting up, using and liking windows 7, I want to eliminate my vista system, which is boated now, completely. However, apparently with an intel chipset, I can't simply format the OS drive using the disc management utility, even though when I boot windows 7, it is renamed the D:/ drive because the bootloader is on the OS drive. I have tried changing the DATA drive to an active, bootable drive in disc manager. Unfortunately, I can't seem to make it the primary partition.
Originally found this forum on google with a hit on help: cannot reformat c drive
useful information, but I am not completely sure what it means.
After spending about a week customizing my Windows 7 install, I am not too happy about the possibility having to reinstall on the OS drive and go from there. What method should I use to format my OS drive, and still be able to boot the DATA drive. I would then like to use my OS drive for storing music, and pictures, etc.
I have an external HD to work with. I suppose I could image the DATA drive with the Windows 7 install, format the OS drive, and then restore the image to the C drive, but that still leaves the problem of how to format the OS drive in the first place. Also, I've never done a recovery from image before, and am not big on the prospect.
Finally moving all the main workstations over to Windows 7. In a test run yesterday - I noticed that Windows 7 jumps ahead of me in a big way right after the main desktop appears.
In the Vista/XP days - I would actually get to install my drivers in my preferred installation order. In this install - especially for graphics - before I even got to install my preferred nVidia drivers - I see that Win 7 has already grabbed and installed 195.65 - presumably from Windows Update - which I do not want.
What's the trick (if any) at "first" desktop to get Windows 7 to hold it's horses and let me install what I want?
I had device driver problems when installing Windows7 RC7100 from DVD so I setup a bootable USB drive. Follow these instructions.
Plug the drive into your PC.Open a command prompt as administrator. Get the drive number by typing:
diskpart
list disk
On my machine the USB disk was number 1. Format the drive by typing:
select disk 1
clean
create partition primary
select partition 1
active
format fs=NTFS
assign
exit Then copy Windows7 files from ISO to your USB drive.
Remember to setup your bios to boot from a USB drive.
I also setup multiple boot for XP, Vista & Windows 7 - no problems.