i have a Sony Vaio VGN-CS325J that comes with Windows Vista Home Premium x64,now i am going to install windows seven x64 on my laptop but i don't want to lose my vista as a matter of fact i want to have dual boot win vista & seven.
is it possible?
(my Vista is installed at Drive C and i have an empty Drive that is F with NTFS file system and 50GB space).
I have windows Vista business with SP1 installed on a Dell Latitude laptop D830. I have run Windows upgrade advisor , it is giving me clear signal to upgrade to windows 7 professional or ultimate. Now with so much news about upgrade problems occurring. Should I upgrade or do clean install? Also I want to know , if there is a difference between windows 7 upgrade and windows 7 full version? With windows 7 full version, Can I get the upgrade option also?
View 4 Replies View RelatedSome might remember I posted a few days ago about installing Windows 7 (64bit) separately on this same comp (different hard drive) to test what drivers worked for the devices I had, in particular the Canon scanner.
Anyway it worked, and I booted into Windows 7 64b fine - but I had a few issues getting back into 32-bit one (64bit one became the active boot. even after i used diskpart and bcdedit etc.
Anyway, I got the 32-bit install to again load as the default (and deleted the 64-bit partition). BUT, I keep getting the Vista booting screen - i.e. the small green loading bar instead of the elaborate "Starting Windows'. I then put in the Windows 7 dvd in and went to repair the install (to try & get the Windows 7 boot screen back), but it wouldnt even find the OS install to repair it.
So basically, its back to the 32bit Windows 7 install fine - but with the older Vista loading screen. Any ideas?
I just installed windows 7 ultimate on my pc.
i already had xp32 and vista 64 business on a dual boot on the same HDD before installing windows 7.
during windows 7 install, I selected the xp32 partition, formatted it and installed windows 7 over the top as I no longer wanted xp32.
When the windows 7 install was complete I expected to see a dual boot screen with
option 1. windows 7
and option 2. vista64
unfortunatelty i have no dual boot options, the pc now just goes straight into windows 7. It doesnt sem to know that vista is there.
i would appreciate assistance in getting a dual boot set up with vista64 and windows 7
I have just discovered that I cannot do an Upgrade from Vista HP to Win 7 Pro and that I will have to do a Custom or clean install. That will be OK and doesn't cause any problems.
I have XP on one HDD and Vista on another with dual boot. However I want to replace Vista HP with Win 7 Pro 32 bit, ( I intend to go 64 bit later on).
What I would like to know is, will Win 7 replace Vista on the boot sequence (MBR?), so that on booting the PC I have the option of selecting either XP or Win 7, or will I be presented with a boot menu of XP, Vista and Windows 7, albeit that Vista is no longer installed? If the latter, will this cause any problems in selecting the OS that I want to launch i.e the MBR looking for a now non existing Vista and would there be a way to remove reference to Vista?
My minister has an hp laptop that uses Vista and I have suggested that she should convert to System Seven. So my question is this, how can it be done without losing any data, preferably and can it be done and have it run effectively with no bugs.
View 7 Replies View RelatedI have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
I ordered the 50$ Windows 7 upgrade disk.
I realize that Windows 7 will need vista or XP already installed for the upgrade version of Windows 7.
But if I want to upgrade my Vista 32-bit to Windows 7 64-bit,
Will I be able to do it with this upgrade disk?
after all I will need a fresh install (because 32 to 64) and this is the upgrade version.
I have an unused Vista upgrade that came with my purchase of a Dell XPS laptop running XP MCE 2005. Rather than having to backup files and then reinstall apps for a clean install of 7, would it make sense to run the Vista upgrade, deal with the Vista driver issues then, and be able to do an upgrade to 7?
View 3 Replies View RelatedI plan to upgrade from Windows Vista Home Premium x86 to Windows Seven Home Premium x64 when it is released. However, I only want to pay for an upgrade license, NOT a full price version.
My current version of Vista Home Premium is itself an upgrade from the original OEM copy of XP that came on my PC.
There are two ways as far as I can see:
i) Vista Home Premium x86 > Vista Home Premium x64 > Windows 7 Home Premium x64 (first stage done using an alternate media which I have just paid GBP 7 to be delivered shortly.
ii) Vista Home Premium x86 > Windows 7 Home Premium x86 > Windows 7 Home Premium x64 (first stage using an x86 retail upgrade, second stage using alternate media obtained after buying the retail x86 package).
However, looking at the following article:
Installation choices for 64-bit consumer versions of Windows Vista
it reveals that the steps are likely to be even more complex. For example, my option i) becomes:Uninstall Vista altogether Reinstall my original Dell x86 copy of XP Home Edition. Use the Vista alternative media to do an upgrade installation of Vista Home Premium x64. Then do an upgrade installation of Windows x64 on top of that. Extremely messy, and almost certain to end in tears!
It would be nice if MS took the opportunity to provide a straightforward upgrade path from x86 to x64 this time around; until we know the upgrade options no one knows for sure I guess. However, does anyone know or suspect an easier method?
For example, with my x86 copy of Vista Home Premium in situ, could I install a clean copy of Vista Home Premium x64 on another partition by booting from the DVD, and then just do an upgrade install of Windows 7 x64 when it become available?
I just got Windows 7 Ultimate for my desktop, and I need to set up a network via Ethernet cable & ASUS 8 port Ethernet Hub with 2 other Vista laptops.
OK, all of the computers are connected to the Hub.Now I have to run a network wizard or something, and I want to do it from Windows 7(desktop).
What are the steps that I need to follow ? Help anyone ?
how do you upgrade from vista to windows 7? I have a 32 bit operating system.
View 4 Replies View RelatedI've been told that it is possible to maintain all ones applications and settings when upgrading from XP to windows 7, if you first upgrade XP to Vista and then the Vista to Windows 7. Can anyone verify that? It would be more time consuming but given the amount of apps I have installed and need, it is the best choice in my view. I have an old Vista disc somewhere so there is no extra expense.
Anyone done this before? or heard of it working?
I'm thinking of switching from Vista to Windows 7, is windows 7 running stable enough that I won't be running into many problems(like driver problems?). What drivers can I use for W7?the same ones as for vista? What's the best way to prerpare for a clean windows 7 installation?
View 8 Replies View Relatedi currently have windows vista with windows mail and im looking to do a clean install to windows 7,
im planning to use windows live mail, how should i backup my emails in windows mail to restore them onto windows live mail?
Lenovo 3000 N100 laptop with Vista on it had all sorts of issues. I cleaned them all up, but couldn't stop it from hanging. Seemingly random. Complete and permanent freeze requiring 10 seconds on the power button to restart.
Eventually decided to move to Win 7 RC. Formatted hard disk completely (with BootIt NG) before installing. Still having the same problem.
Memtest86 reports no issues (after 47 hours).
Chkdsk no errors.
sfc.exe no errors.
Hitachi dtf no errors (although it's a Toshiba drive).
All the regular spyware, adware, malware programs - no issues.
Interestingly, the problem doesn't seem to occur in Safe mode or when performing chkdsk, installing Windows, or anything else outside the main windows environment. This leads me to believe it's not hardware, but some system/software element common to both Vista and Windows 7?
I'm using a Lenovo 3000 N100. 1.73GHz, 1gig ram, 32 bit Win 7, version 6.1, build 7100.
Also, I'm currently trying to run a Windows Update from within Safe Mode With Networking, but it's not working. Should it be?
I tried to upgrade from Vista to windows 7 rtm,
everything was OK but when it start to open desktop for a first time, taskbar start to crash and reapear, it is like constantly refreshing, and it is impossible to open any program cause it shuts down immedieatly,
and taskbar and desktop continue to "refresh".
that is happening also in safe mode, only much slower.
windows doesnt repport any error, and also repair option said it does not detect any problem... ?
does anybody have similar experience, and how to solve it?
I've been going at this all day searching, trial and error, and it's all very frustrating at this point.
I use a custom bootloader for my vista 64 to trick it to be activated (not sure your policy on discussing this). But now I wanted to try Windows 7 since it has been released in the RC status (because I had aquaintances try 7000 beta, and no one liked it). So I want to have it on my machine to tinker with and test it out.
I ended up taking my 300GB drive, and removing about 60GB from it, creating a logical partition, formatting it, then booted into the Windows 7 dvd I have. (win 7 - 7600)
Firstly, it takes about a couple minutes just to load the files. Then once it finally gets to the splash* screen and the cursor appears.....it takes about 5-10minutes for the "install" window to appear which seems VERY odd since my machine is VERY fast.
It takes quite a bit of time to accomplish installing from loading to finished (30minutes maybe), and by then it overwrites my bootloader for my VISTA installation (so its not activated anymore), and it shows WIN 7, and below that Vista 64. Read more at the forum...
And tips on how to do that, and is it even possible? I wanna get Windows 7 on my girlfriends computer, and they are not yet selling family licenses in my country (!!), so I was hoping I could upgrade her Win Vista to Windows 7 without having to do a clean format.
View 2 Replies View RelatedIs there a program or a way that I can backup my Windows Vista 32bit Mail msgs and account settings and my and my FireFox bookmarks , tabs and all embedded site passwords and restore them to a clean install of Windows 7 64bit ?
View 1 Replies View RelatedI have four SATA II drives, four gig memory, etc, in my machine that have Windows XP and Vista dual-booting. Both OS's are installed on the same physical drives; about 150 gig each partition.
I've freed up one of the drives, changed the BIOS to boot from the DVD, and installed Windows 7, 64-bit. The installation completed without a hitch and the setup detected everything, sans the Viewsonic monitor. Windows did have a driver for the monitor, but I used the one for Vista 64-bit from Viewsonic and we are good.
After rebooting Windows 7, I expected to have couple of boot option but there's none. No XP and/or Vista, just Windows 7. I've tried to locate the bootmanager in Windows 7, but I couldn't find it and that worried me. There was no backup made since it should've picked up the other OS's.
I didn't touch any of the bootsectors, nor did Windows 7; the latter one did make the drive a primary disk and installed the boot record there. After modifying the BIOS, making the the XP/Vista drive the first drive to be booted, XP and Vista came back, but Windows 7 disappeared. I can boot either OS's by changing the order the drives are booted by the BIOS, but I rather have the choice for XP/Vista/7 in the boot menu.
I am not sure why Windows 7 didn't pick up on the other OS's; the reason could be the SATA drives, if I'd have to guess. Since "disk 1" was set as the first drive to boot by the BIOS, Windows 7 did not check other drives and declared itself the only OS.
The question is, how do I add Windows 7 to the Vista's boot menu, or alternatively, how do I add XP/Vista to 7's boot menu?
The problem I have is that none of my computers can access either of the Windows 7 computers. The Windows 7 computers can access the Vista and WinXP computers, but not the 2nd Windows 7 computer (asks for a user and password).
When trying to access the Windows 7 computers all ask for a user and password, I had set the Windows 7 computer to be open access for networking, but this does not seem to of happened (I've done something wrong).
I had installed Link Layer Topology Discovery (LLTD) Responder on my XP machine as advised but I got an error message saying I had a newer update so this was not installed.
I am now at a total loss as to where to go now, I have done heaps of google searches and these tried to help but still did not slove my problem. (I'm not computer dumb, so do understand 90% of what is required).
I have the following setup.
2x Windows 7 RC systems, hardwired.
2x WinXP-Pro systems, hardwired
1x WinXP-Pro Laptop, wireless
1x Vista Laptop, wireless.
No home server installed.
I did a clean install of Vista but I don't have my product keycode. I want to go ahead and upgrade to Windows 7. Is it possible to upgrade to Windows 7 without that Vista keycode and just use the new Win 7 keycode?
View 2 Replies View RelatedI currently have vista 32 bit installed and was thinking of upgrading to windows 7 64 bit. From what I've read, it is possible to do this using the upgrade disc, but not with the in place upgrade. Wondering if anyone could explain how to do a proper clean install using the upgrade disc. Thanks.
BTW, I am running the home edition of vista and would be going to home premium of windows 7 if that makes any difference.
I just bought windows 7 upgrade home premium. currently my home premium machine has a lot of junk and i am wondering if i wipe everything and reinstall vista again BUT not activate it (you know "you have 30 days to activate) and upgrade windows 7 and activate the windows 7 version. Hope i explained it well....
WOULD THIS WORK?
I started out with Vista 32 Ultimate installed on my machine. I created a second partition on that system drive , and left my data drive alone and installed Win 7 64 Ultimate RC on the new partition. The system boots to win7 with no boot menu to pick vista from, any ideas?
View 2 Replies View Relateda little tip here as I HATE webmail based type of email clients. I was quite happy with Outlook express and Windows mail.
This tip works on both X-86 and x-64 versions.
1) Take ownership of the windows mail folder (it's in program files or program files (x86) depending which version of W7 you are running.
2) delete contents of the folder.
3) copy your old VISTA windows mail folder to the windows mail folder on W7
4) make a shortcut link to winmail.exe
5) set up your accounts like on Vista / Outlook express in XP
6) enjoy.
I upgraded from Vista to Windows 7 with no problem. A pop up did mention that I would not be able to use windows mail but did advise my setting and files would still be able to be used. I now have Outlook running but can find no way forward to find all my previous emails.
Question.
Where are my files?
I recently bought a DELL STUDIO 1555 on June 12.
Since Free windows upgrade is for the systems purchased after June 26 i am not getting a upgrade.
I am from INDIA. I contacted Dell Customer Service here. They said i cannot purchase it from them also. Actually they had very less information about Windows 7. All they just said is that since my system is bought before June 26 i am not eligible. They had no further information about it.
I have Two Questions
Q1. Why Can't i purchase OEM version of windows 7 from DELL?
Q2.Since my laptop is shipped with OEM version of WINDOWS VISTA HOME PREMIUM 32 BIT SP1, if i purchase a WINDOWS 7 HOME PREMIUM UPGRADE PACK from Microsoft / Amazon etc,.
Can i install it on my machine ??
Can i install WINDOWS 7 by formatting C Drive or should it be installed over Vista ??
I was runnung vista home 32 bit, and I upgraded to windows 7 professional.
I did a clean install of windows 7, 64 bit. May I run, legally, the vista home in a virtual window under the windows 7?
I ask because I have installed the vista home using vmware player with the windows 7 as host, but to continue, I must validate the vista home - the program I used for the upgrade.
I read how to import vista mail contacts to windows 7 (using windows Live), but how do you import(?) vista mailboxes (sent, deleted, saved, etc)?? Also, can you continue to have a microsoft news reader in windows 7 and can one import those also in some fashion?
View 3 Replies View Related
