What is Best Non-MS Network Monitor for Windows 7?
OK... before half of you suggest Perfomance Monitor in Administrative Tools, I'm looking for something easier to use and preferably something that can measure both wired and 802.11x speeds and throughputs.
been reading about Windows 7 monitor calibration for color matching at microsoft site and how to do it. don't have Windows 7 yet tho. is this monitor calibration effective? colors on monitor and printed materials match pretty well say compared to 3rd party calibration tools?
I'm not sure where to put this post, so I'm putting it here. I have a dual monitor setup, an HP LP2275w as my primary monitor and a Viewsonic P95F+ CRT as my secondary monitor that I switch on from time to time. My problem is that when windows starts, it always goes to the secondary CRT monitor, even if it's off.
I have them set up correctly in the display settings where my LCD is the the main monitor, 1, and the CRT is 2. I also have this set correctly in the nvidia control panel, but I get the same problem every time windows starts.
I have ordered a PC (Dell Studio XPS 8100, 8GB Ram, Nvidia GeForce 240, Intel Core i5 750) and would like to use my existing BenQ FP93E S monitor with it as I am very happy with this monitor. Apparently the BenQ is compatible with Vista but I cannot find out whether it is compatible with Windows 7. I intend connecting via DVI-D.
Now Im using an old monitor LG 700s, and for some weird reason I cannot change the resolution to 1152x864 on 75 hz...I just get 60 hz (lot of screen flicker) option and nothing else, updated to the latest win 7 nvidia drivers released today...updated the monitor drivers as well, but Im not getting that refresh rate.
The funny thing is the monitor does support 1152x864 75 hz according to the monitor specs and I have it tunning on that resolution on both Win XP sp3 and Windpws Vista SP1 both 32 bit....
What am I doing wrong.....or is it just an issue with the drivers since its a new OS and its gonna take a lot of time for nvidia to fix...if it is an issue on their part?
I have AT&T DSL and it just drops out, I have a 2 wire router and the DSL and Internet lights will flash red when it drops, I have had this problem for almost a year and AT&T will run a useless test and tell me everything is fine. I have searched for 3 days trying to find a Broad Band Monitor to let me know when it drops and for how long, also how many times while I am at work, or just not on the PC.
How would one go about doing a network install of windows 7, the machine I'm on has no dvd, my usb stick is missing, and I don't wanna run an install from inside windows to a separate partition cause I don't the new install of windows 7 seeing "d:" as it's main directory.
I am having an apparently common problem: my Windows 7 machine can access my XP/SP3 laptop just fine but though the XP can see the Windows 7, it can't access it at all. What I get is...[Windows 7 machine] is not accessible. You might not have permission to use this network resource... yada yada yada.
I've looked up the topic and this phrase and find lots of answers, some ridiculously complex (registry hacks?), most of them contradicting each other. Nothing I've found offers a step-by-step how-to.
I'm one of those who skipped Vista, so I'm not familiar with all the new security. When my home network was all XP, I just connected a computer to the workgroup, gave folder permissions, and go. (I don't use passwords.)
So how do I do it now?
There are/will be a lot of us moving to 7 straight from XP, and we need some sort of "you used to do this, now you must do this" type of guide.
It started out months ago, when ever I would try to do multiple things over my network connection on my Windows 7 machine, the network connection would just die, and I'd have to disable/enable my LAC to get a connection again.
This included opening up too many tabs in firefox, or trying to stream music off my other PC, play a game, use vent, and web browse etc. It seemed to be linked with the # of active connections I had.
Well now it's doing something entirely new, and I need help. When ever I try to do anything streaming, it's just not responding. It sets up the initial connection, downloads a little bit, then just stops responding. I can still go to web pages and load them easily (provided they're not large pages), but if I try to watch a video, it only loads parts and doesn't play.
I tried running the Pandora app I've used up until today without issue, and all it does is open, load the song, then stop. I tried streaming audio off my other PC, and all it does it load the play list, but doesn't play.
For all the apparent attention to backward compatibility that MS says they put into Windows 7 I find that a Mixed Windows 7 / WinXp network is really problematic.
I am able to network Windows 7 MyDocuments without too much problem, though not as easily as a Windows 7 / Windows 7 or a WinXP / WinXP network. I am finding it impossible to connect to a second disk on my Windows 7 computer from an XP machine on my network. I can "see" the 2nd drive but am prevented from connecting ("blah, blah is not accessible, contact network administrator...").
One thing I have noticed from perusing this forum is that some people are having problems connecting from XP to 7, while others can not connect from 7 to XP. No consistency that I can see, which is cause for pause in my books.
The sharing permissions are set on the drive.
I hope the problem is mine and not systemic, because if anything is a Windows 7 deal-breaker would be it. Multi-computer organizations are not going to migrate their computer to Windows 7 en-mass, rather one computer at a time.
Any illumination on this problem will be greatly appreciated.
I just upgraded my fileserver to 2008 R2 (clean install) and also upgraded my home PC to Windows 7 (also a clean install). Both are connected together using a linksys 8-port gigabit switch and each machine has 2 NICs which are bridged. The server has a static IP and the workstation currently has a static IP as well (although I've had it set for DHCP and the problem still occurs). Network Discovery is enabled on both and they are both in the same workgroup.
Now with that being said, here's the issue.....
Periodically, the workstation no longer can "see" the server if I try to browse the network. However I can still ping the server by IP as well as name, browse fileshares and even RDP into it. The only thing that is affected is if I'm using a program on my PC and need to access files that are on a network share, then the server isn't listed under network to allow me to browse to the share.
When this happens, I can usually reboot the server and then it will show up, but there seems to be no set pattern as to when it will disappear. If both machines are left on and not rebooted, the server sometimes will just show up under Network for awhile and then disappear again. One final note, on the server, the workstation does show up when browsing the network.
I have all my printers connected to Windows 7 machine. I have an Xp machine connected via home network that I want to use the printer(s) over the network. Once I get the printer network connection established, it works fine except when I shut down the computers and restart them the next day. Even though the desired printer is showing "ready" on my Xp machine, I cannot print to it.
I believe that the Windows 7 machine is changing the printer Share name some times as I found out today. Once I make sure all names etc are the same and re-booting both machines it seems to work once again. Today I had no luck until I went to go to the shared file folders on the Windows 7 machine, Windows 7 asked me for sign in/password, then the printer started working.
I need to fix this, got something not configured correctly? Should not matter what machine is turned on first to get both machines networked together?
I have installed Windows 7 on a new PC and been playing around with it for a couple of days.
I have added it to my home workgroup and shared out some folders. I have turned off Windows firewall, however if I try to view the shared folders from other machines (XP) on the home network I get asked for a login and password.
Yet if I browse the other XP machines from the Windows 7 machine I can see all their folders. I can't find a setting anywhere that would seem to address this!
I need to monitor a computer when i am traveling, the computer will not be on my network and i would like to monitor and track the websites visited while i am away
I am running 64bit Windows 7 on a DX58SO motherboard with the latest bios and board drivers downloaded from intel.- Windows 7 has all of the updates installed. After I installed SP1 I noticed that I had a yellow exclamation mark by the network adapters icon in the device manager applet with the error displayed as:
WAN Miniport (Netwprk Monitor) #2 This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
The drivers as identified in the properties sheet (ndistapi.sys and ndiswan.sys) are in fact located in their proper location in Windows/System32/Drivers/
I tried to uninstall the Wan Miniport to see if a restart would load the drivers but Windows would not allow it to be uninstalled. My network is working OK so what exactly does the Network Monitor do?
I have been looking for network usage monitor freeware that is compatible with Windows 7 with no luck. I need it urgently to report my own monthly usage to my landlord so that my flatmates cannot lie about their usage in working out porportions of the broadband bills. Please post download links if you happen to know any. I have had though luck with any Windows XP only freeware of this sort.
I recently switched ISPs to CenturyLink. While faster and cheaper then CableOne, it doesn't have a cap. CableOne offers 50mb for a few dollars more but has a 50g cap. This may effect me big time as I'm a big fan of Netflix streaming via Roku. Thing is, I can't monitor what's going thru Roku so I have no idea how much over a cap I would go. I use NetWorx for my local computer and it works well. It says it can't see the router because the router does not support SNMP.Anyone know of a program that would allow me to monitor all traffic on my network? Currently, I have my computer, my iPad, my wife's Kindle, her computer and the Roku.
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
I purchased the Win 7 Pro Upgrade 32bit via digitalriver, but I've been doing some reseach and probably should have selected the 64bit version.
- Any ideas how I can get the 64bit version?
- For those who ordered the 32bit back-up disc kit for the extra $15 and have received it, does it come with both 32bit & 64bit?
- I've already installed and activated the 32bit version, but when I go to install the 64bit version, will I need to / is there a way to deactivate my initial 32bit install or will this not matter?
I'm currently running 32-bit Windows 7 (Professional, full version) on my laptop, and want to use this machine to create a bootable USB drive with 64-bit Windows 7 (also Professional, full version). I tried going through the steps that are available on various tutorials online, but I'm always tripped up while attempting to use bootsect to make the drive bootable; basically I get an error saying that I need to be using a 64-bit OS.
I don't have convenient access to a computer with 64-bit Windows Vista/7 (I work at an academic institution where all pubic computers have XP or Linux), so I'm wondering if there's any way to get around this and create a bootable USB for 64-bit Windows 7 via a 32-bit OS.
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
I am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D Windows 7 home premium 64-bit AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
I recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU Chipset : Intel G41 Processor : Intel Core 2 Duo E6420 @ 2133 MHz Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM ) Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1) Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
I'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open Network and Sharing Center - Open and refreshed Network and Sharing Center - Closed