been reading about Windows 7 monitor calibration for color matching at microsoft site and how to do it. don't have Windows 7 yet tho. is this monitor calibration effective? colors on monitor and printed materials match pretty well say compared to 3rd party calibration tools?
View 2 RepliesWhat is Best Non-MS Network Monitor for Windows 7?
OK... before half of you suggest Perfomance Monitor in Administrative Tools, I'm looking for something easier to use and preferably something that can measure both wired and 802.11x speeds and throughputs.
I am preparing to replace my primary hard drive. The existing drive has limited space and there are indications that it may not last much longer. I have created a system image on another storage drive and a recovery disk using the software that is built in to windows 7. Is this an effective way to replace my hard drive? Is the windows 7 software reliable?
View 5 Replies View RelatedReinstalled windows from Home Premium 32-bit to Ultimate 64-bit.All was okay, except the fact that I could not connect to my home wifi. It asked me for a password, I typed it in, then it asked me for it again, but this time it inmediatly said that it was invalid. Other responses ive had are Network security mismatch, windows cannot connect to the network. I have tried many different things, such as installiing the 32-bit version of Ultimate, updating drivers, and i cant connect to the wirelles.
View 1 Replies View RelatedI'm not sure where to put this post, so I'm putting it here. I have a dual monitor setup, an HP LP2275w as my primary monitor and a Viewsonic P95F+ CRT as my secondary monitor that I switch on from time to time. My problem is that when windows starts, it always goes to the secondary CRT monitor, even if it's off.
I have them set up correctly in the display settings where my LCD is the the main monitor, 1, and the CRT is 2. I also have this set correctly in the nvidia control panel, but I get the same problem every time windows starts.
Is there a way to fix this?
I have ordered a PC (Dell Studio XPS 8100, 8GB Ram, Nvidia GeForce 240, Intel Core i5 750) and would like to use my existing BenQ FP93E S monitor with it as I am very happy with this monitor. Apparently the BenQ is compatible with Vista but I cannot find out whether it is compatible with Windows 7. I intend connecting via DVI-D.
View 3 Replies View RelatedNow Im using an old monitor LG 700s, and for some weird reason I cannot change the resolution to 1152x864 on 75 hz...I just get 60 hz (lot of screen flicker) option and nothing else, updated to the latest win 7 nvidia drivers released today...updated the monitor drivers as well, but Im not getting that refresh rate.
The funny thing is the monitor does support 1152x864 75 hz according to the monitor specs and I have it tunning on that resolution on both Win XP sp3 and Windpws Vista SP1 both 32 bit....
What am I doing wrong.....or is it just an issue with the drivers since its a new OS and its gonna take a lot of time for nvidia to fix...if it is an issue on their part?
Can someone please explain why in the year 2009 do we still have to calibrate joystick and control pads (granted it only takes a couple of seconds in the game) just to get things to hold center? I've never understood why a PC has to calibrate it's gaming peripherals whereas consoles you don't.
View 1 Replies View RelatedI am having a problem with the built in Windows 7 color calibration.I follow the wizard for achieving the correct calibration and I am very happy with the final results. However when I restart the computer it looses the calibration settings, so it has to be re-done.
View 1 Replies View RelatedI've recently decided to dig out my old Logitech Extreme 3D Pro joystick and put it to good use. However, it seems that Windows 7 either lacks the calibration wizard that Windows XP had or it's just hidden very well. I've google searched "Joystick calibration windows 7" and the like numerous times, all coming up with some tutorial for XP.Anyone could point me in the right direction as to what I should do or where I can go to calibrate this.
View 7 Replies View RelatedMy Calibration Retry Count is at 618. My hard drive is very audible also. Is that a sign of failure?
View 1 Replies View RelatedHow to Open and Use Display Color Calibration in Windows 7 ?
View 0 Replies View RelatedI got a new monitor recently - a Viewsonic VA2333-LED. I found that I didn't like the color settings and was not able to get the right color/gamma/brightness and contrast settings by using the monitor's menu. I have an Nvidia card, so next thing I did was to edit the color settings through the Nvidia control panel to just how I like them, I selected "Use NVIDIA settings", hit apply and saved the new settings. Looked great until I had to reboot my computer or it went into stand by at which point mysteriously the "Use NVIDIA settings" would become unchecked and my color was back to being an overexposed, bright white mess.
Next I tried the WIndows Color calibration. I went through the process saved the new color profile and set it as the default. Then, lo and behold, after my computer went to stand by, the color was right back to being crap. I even went so far as to delete the default profiles completely, leaving only my adjusted profile set as default. But again, when the monitor goes to stand by, the color settings that I created are lost. Here's the strangest part, when I enter the WIndows 7 color management screen, it still shows my profile as selected (even though clearly my settings are not applied). I have to uncheck the "Use my settings on this device" box and then recheck it and voila, my settings are back. And on top of that, my settings are only lost about 50% of the time that my computer goes to stand-by. On reboot, they work properly, but get lost half the time when the computer enters stand-by.
Ive just installed Windows 7 on my desktop computer but when i try to burn a disk i keep getting "Power calibration error" I have checked for the IMAPI in services but it isd not there. I also have the same problem on my laptop...IMAPI is not there either, my laptop is running Vista.. it just stopped working all of a sudden.
Do i need to download IMAPI from somewhere?? Ive looked everywhere but cannot seem to find it or any info on it if its missing .
I have a Dell XPS 15 (L502X) laptop withIntel Core i7-2630QM processor6 GB DDR3 RAM15.6" Full HD LED Screen2 GB NVIDIA GeForce GT540M with OptimusMy display was a little 'warm'. I mean that what should appear as white didn't appear white, instead it appeared creamy (i.e. according to RGB scheme, the red content in the display was more than what is required.)To fix this, I did thisRight Click Desktop > Personalize > Display > Calibrate Color and then adjusted the red and green bars to make the color settings proper. Now, the display is as I want it to be.The problem is that when the PC reboots or when an UAC window pops up, the settings are lost and again my display becomes 'warm'/creamy. I've tried going to Control Panel > Color Management and doing what this says:
View 5 Replies View RelatedWhen I run the Display Color Calibration to alter the gamma cos it is too bright for me, It resets after any reboot or shutdown is there any way to keep the adjusted setting after shutdown/reboot?
View 9 Replies View RelatedI have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
I ran HDTune and it shows a warning next to "Calibration Retry Count". Under the "Data" column, it's been 612 since yesterday. What does this mean for my hard driveAlso, I've use various other HDD testing programs and I get perfect results.
View 8 Replies View RelatedIs it possible to upgrade in place from Windows 7 32bit to Windows 7 64bit.
Is it better to do a clean new 64bit install?
I purchased the Win 7 Pro Upgrade 32bit via digitalriver, but I've been doing some reseach and probably should have selected the 64bit version.
- Any ideas how I can get the 64bit version?
- For those who ordered the 32bit back-up disc kit for the extra $15 and have received it, does it come with both 32bit & 64bit?
- I've already installed and activated the 32bit version, but when I go to install the 64bit version, will I need to / is there a way to deactivate my initial 32bit install or will this not matter?
I'm currently running 32-bit Windows 7 (Professional, full version) on my laptop, and want to use this machine to create a bootable USB drive with 64-bit Windows 7 (also Professional, full version). I tried going through the steps that are available on various tutorials online, but I'm always tripped up while attempting to use bootsect to make the drive bootable; basically I get an error saying that I need to be using a 64-bit OS.
I don't have convenient access to a computer with 64-bit Windows Vista/7 (I work at an academic institution where all pubic computers have XP or Linux), so I'm wondering if there's any way to get around this and create a bootable USB for 64-bit Windows 7 via a 32-bit OS.
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedI have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies View RelatedI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 Replies View RelatedI recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU
Chipset : Intel G41
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM )
Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
I'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
I have AT&T DSL and it just drops out, I have a 2 wire router and the DSL and Internet lights will flash red when it drops, I have had this problem for almost a year and AT&T will run a useless test and tell me everything is fine. I have searched for 3 days trying to find a Broad Band Monitor to let me know when it drops and for how long, also how many times while I am at work, or just not on the PC.
View 2 Replies View RelatedI am looking for any Windows 7 Theme that includes changing the looks of any window that exemplifies the architectural look of a Mac: sharp edges, and boxy buttons, and colored scroll bars. It doesn't have to be necessarily the Mac theme, but anything around that look is acceptable.
I am fine with tweaking the explorer.exe, and some system32 files.
Any suggestions, comments and questions are always welcome.
P.S. I just got tired of the round look of any window.
I own a USB Drive ... Dane-Elec 16GB . I have a big problem with the USB on Windows 7 .
This USB have a password protect system and he need to create a virtual floppy drive so i can open the password program in order to get access to the USB .
My problem is that Windows 7 can`t install the virtual floppy drive . I have Windows Vista Ultimate SP1 as my second OS and the USB works perfect . Same on Windows XP . The only problem is here on Windows 7 . I used Windows updates to get the drivers but still not working .
By the way , if i run W. Vista and disable the password protection then in Windows 7 i can see my USB drive but i need the protection for my USB so if anyone know how to solve it please tell me .
[EDIT] Forgot to mention that i have the latest drivers for the USB even if i make the update from Device Manager i get the next message :
"Windows has determined the driver software for your device is up to date. USB FloppyDisk Drive"