Network Monitor For Router (ZyXel Q1000Z)?
Feb 3, 2012
I recently switched ISPs to CenturyLink. While faster and cheaper then CableOne, it doesn't have a cap. CableOne offers 50mb for a few dollars more but has a 50g cap. This may effect me big time as I'm a big fan of Netflix streaming via Roku. Thing is, I can't monitor what's going thru Roku so I have no idea how much over a cap I would go. I use NetWorx for my local computer and it works well. It says it can't see the router because the router does not support SNMP.Anyone know of a program that would allow me to monitor all traffic on my network? Currently, I have my computer, my iPad, my wife's Kindle, her computer and the Roku.
View 2 Replies
ADVERTISEMENT
Oct 21, 2012
I recently for the first time went over my monthly data cap for broadband and looking it to it a bit more it looks like a lot of the programs my kids are using are hogging the bandwidth. I don't really want to pay for more bandwidth (as I already pay way above average as I live in a small rural village) but I don't want to restrict too much what my kids are doing. The solution to me seems to be to see if I can monitor and if possible control to some extent the data on each of the IP connected to the router if that is at all possible. I have looked at my router settings and unfortunately they do not permit anything more than traffic monitoring and there are no custom firmwares to allows additional features of any use. Is there any software that I could use to do this?
View 1 Replies
View Related
Sep 27, 2011
I have AT&T DSL and it just drops out, I have a 2 wire router and the DSL and Internet lights will flash red when it drops, I have had this problem for almost a year and AT&T will run a useless test and tell me everything is fine. I have searched for 3 days trying to find a Broad Band Monitor to let me know when it drops and for how long, also how many times while I am at work, or just not on the PC.
View 2 Replies
View Related
Jul 19, 2011
1x PC (Mine, and i'd like to the be the admin Win 7 Ultimate X64) with internet access via the router and connected to a NAS 2x PC's Win 7 32bit with internet access via the router and connected to a NAS 1x NAS to be shared by all 3 PC's 1x NAS 1x 4 port router
In simple terms the 2x Win 7 32bit PC's are for my children hence why I would like admin control of the computers. They will need a connection to the internet and share the same NAS. The Win 7 Ult X64 computer will also be connected to the NAS as well as the router for internet access.
All PC's and NAS to be connected with cable as opposed to wireless. whether this would be easy to set up? What cable would I need between the NAS and the PC's?
View 2 Replies
View Related
Sep 21, 2012
I have a new HP Pavillon g4 with Windows 7 Home Premium installed and connect to the internet via an external antenna to a hotspot nearby. I'm trying to create a Home Network or Ad-Hoc computer to computer network without a router and without cables, using my Windows 7 computer as the master, receiving the internet, and my second computer running on XP SP2 as a slave. I have tried ad-hoc setup, but my XP does not connect to the internet (the XP connects without problem when I insert the external antenna directly). Does anyone know if it is possible to share internet between Windows 7 and XP and how to go about it? I googled for hours and tried different setups, all failed. I have successfully installed the "Virtual Router Manager", it works well between Windows 7 computers or tablets, but not with XP.
View 14 Replies
View Related
Aug 30, 2011
Every now and then the internet will stop working on my PCs. I have 2 near me at all times and both will stop working, a wireless lappy and wired desky lol.It will come back in a moment or in a little while. I havent figured out if its the router or the cable modem.
View 3 Replies
View Related
Jul 25, 2012
I work in a small office and use a laptop with Windows 7. We use the same router and have wired internet. His computer is connected to a "Network 4" while mine is connected to the private wireless internet system we've set up. He can't connect to any other connections on his computer while all the other connections around our office is visible on my laptop.
View 1 Replies
View Related
Feb 19, 2010
For some reason my netgear router is not showing on the network page of 'my computer'.it used to show up as 'Netgear Router' and if i clicked on it it would ask for my login and then display my configuration setting etc on a browser page. If I click on a link I have setup on my browser, it navigates there as normal.Not a humungous issue, but although I have tried a system restore, it still does not show up as expected. Connectivity is fine, as per normal.
View 9 Replies
View Related
May 24, 2012
I do not have a manual for our router. I do not, therefore, know the username, password or the number to use as a web address, which is what Kim Komando is telling me I need. How can I secure the router so no one else can log on to my network?
View 1 Replies
View Related
Jun 30, 2009
I have been having a problem with my home network crashing when using WIndows 7. For some reason, whenever I tried to access shared folders or computers on my home network, windows 7 would show "limited connectivity" and I would lose my internet connection. The crazy thing, is that Windows 7 was somehow causing my router to fail because all of my networked computers lost their connections (wired and wireless) until I reset the router and restarted windows 7.
I recently turned off "network discovery" in my network control panel in WIndows 7, and the problem seems to have stopped. But now I still can't access shared computers, folders, or printers. Does anyone have any idea what is going on?
Router: Belkin wireless G router with the latest firmware
Adapter: Realtech integrated into my gigabyte motherboard
Windows 7 build 7100 64bit (Although I've had the same problem with other early Windows 7 builds)
View 2 Replies
View Related
Mar 25, 2012
I have two Windows 7, two win xp (4 in total) connected as file sharing network.1. hen I turn the router off and then on, the win xp computers see all the rest, but Windows 7 computers see no one, they still have the internet ability.2. If I turn on the Windows 7 computers first: the 1st sees nobody, the second sees the first but not the consecutive computers. No home group.
View 3 Replies
View Related
Aug 16, 2012
I have a Verizon router and I purchased a NetGear N900 wireless dual band usb adapter for my son's computer. I was going to test the N900. It is for college.The N900 will not connect. I do have three other laptops that do connect and work ok. The N900 has WPS but the Verizon router does not.So I have to use the SSID, 'wep' option, and the wep key. The N900 tries to connect and stops trying after about 20 seconds or so. The N900 varies from 4 to 5 green bars. N900 installation was followed and went smoothly and the new software version was used. We are using Windows 7 Home Premium 32bit on my son's computer.I also purchased the Western Digital My Net N750 router for college. I have no way to test everything at home. It does have WPS so at the college I hope everything works.
View 2 Replies
View Related
Nov 6, 2009
I have a home network connecting 4 computers, 2 print servers, and a media bridge to a Linksys wireless router. Pretty much the same setup from XP to Vista to Windows 7.
After installing Windows 7 x64, I am seeing a device under the category "Infrastructure (1)" on my Windows Network screen. It identifies itself as "WNR843Bv" - a Netgear router - which is definitely NOT a device on my network! Maybe it belongs to a neighbor, I can't verify this. Other than this - the network is functioning as expected.
I use WPA2 encryption and MAC Address filtering on my Linksys router, so I am (reasonably) confident that this device is not connected to my network. However, I am not comfortable with this.
Can anyone help me understand :
(1) What is an "Infrastructure (1) device?
(2) Why is it showing up on my Network screen in Windows 7?
(3) How can I get rid of it?
View 9 Replies
View Related
Jul 19, 2012
don't know secutity key pass word
View 1 Replies
View Related
Jul 20, 2011
I have a wired network that has the following connected:1) My Main PC (Quad Core) with all the Shared HDD's (Windows 7 Ultimate 64bit)2) My Wife's PC (HP Touchsmart) Windows 7 Home Premium 32bit3) WD TV LiveHub (Media Player)4) WD TV Live (Media Player)5) My Second PC (Windows 7 Ultimate 64bit)6) My Third PC (Windows 7 Ultimate 64bit)and occasionally my laptop which has Windows 7 Ultimate 64bit and Ubuntu 10Often my ADSL connection drops and I have to restart my router to get it running.Once I do that, and My Main PC is on AND any other PC is on too, the network shares disappear. If I go to "Network" on any PC only the Media Servers are shown and if I go to the Media Players, no shares are shown.If I turn off all other PC's and THEN restart my main PC all shares appear again.I have been searching the Internet but haven't found anything that worked.
View 7 Replies
View Related
Jun 7, 2012
My computer has been acting up lately,I haven't made any changes to my computer or anything but it seems to just not want to connect to the inter for more than 5 min. My othe computer on the house seems to connect fine, but mine will only connect for 5 min the can't find the network for 15 min and it does this repeatedly. I tried updating the drivers but there were no updates available. I ran the troubleshooter and it couldn't find a problem, it just said to make sure I was in range of the router, which I am because my computer was working fine in the same spot about a week ago.
View 12 Replies
View Related
Feb 24, 2011
I have a wireless router for a desktop...want to use it for mini notebook, lost security key!
View 5 Replies
View Related
May 31, 2011
I am running Windows 7 Home Premium (64 bit) on a Dell Inspiron 560. I am using a DI-524 D-Link wireless router. I have an Acer Aspire One Net Book running Windows XP Home it is equipped with an internal wireless network adapter. I can connect/communicate with router and access the internet with no problems whatever. However, when I connect an external wireless network adapter e.g. Alpha AWUS036H I cannot get a connection when I disable my internal network adapter. I have also tried the Trendnet TEW-424UB USB external wireless network adapter and the symptoms are exactly the same. If I leave home and use another Wireless point of access I have no trouble connecting using the external adapters which means the problem is confined to my personal home network. I have removed and reinstalled my router, and the network adapters drivers etc. I have uninstalled my Norton Firewall and and disabled my Windows firewall to no avail. I have removed my WEP security features and tried to run it open with no improvement. I have connected the external network adapters on a neighbours computer running XP to see if I could connect to my home network. That didn't work as well. Bottom line is I simply cannot get an external wireless network adapter to work with my router. Yet my internal netbook adapter connects with no problems at all.
View 2 Replies
View Related
Oct 28, 2011
I am connecting to my office computer from home using remote desktop connection.
My office computer is in a network under router. So I forwarded a port 3389 to my computer's internal ip address. Now I want to connect to another computer at my office from home. I tried forwarding the port 3990. But I was not able to access using remote desktop connect.
What should I do to access the second computer. Will 3390, 3391 ... will not work?
View 7 Replies
View Related
Jan 27, 2012
Have a small home network that has 1 desktop, 3 laptops, and tablet PC. The laptops are wireless and use Vista Home Premium and Windows 7). The desktop is hooked directly to the router via Ethernet (an Acer the problem PC).The router is WRTU54G-TM with the latest firmware, with security on it set to WPA-Personal and TKIP encryption. It hooks into cable modem. The Acer has a NVIDIA nForce 10/100 Mbps Ethernet NIC that came with system. Driver is 73.0.6.0 dated 4/30/2009. The system is less than a year old. System is Acer AX3400G-U4802 bought from Wal-mart.Windows 7 Home Premium 64 bit ssigned to same Workgroup as other PCs.The Acer had problems a month ago when the power went off and on a couple of times. It then would not display a screen on the monitor. The fan and system would come on but not beep. Sent it in to Acer and they returned it saying nothing was wrong. Was able to power it up initially, but then had the display issue again. After turning system off and on multiple times I got it to come up. It won't connect to the router. Doesn't see it. In the ipconfig it was giving a 169 IP address. Seeing that DHCP was not working, I manually changed the IP to what is needed to connect to the router and used the router's gateway IP. Still no joy. The NIC cable should be fine. Tried others. Same result.
I am ready to return it again to Acer and tell them about the Internet issue. Oh, by the way checked my wall outlets and all are getting enough juice. May have to invest in a backup power supply. Here is a detail of ipconfig that I have tried (can't do advanced Windows tricks as this is the Home Premium addition and Microsoft has dumbed it down ) :
===================
C:Windowssystem32>ipconfig /release
(and the same message for ipconfig /renew) -
Windows IP Configuration
An error occurred while releasing interface Loopback Pseudo-Interface 1 : The sy
stem cannot find the file specified.
[code]....
View 3 Replies
View Related
May 5, 2012
I have a wired linksys router that works fine. I'm not using DHCP on it, its setup at 192.168.1.1. My pc which only has a wired NIC, connects with no problems.I recently bought a tplink wireless router. I changed it so the ip is now 192.168.1.254 (it was 192.168.0.254 originally which meant I couldnt access settings to change from the default password, SSID).
I got the tplink wireless router, so I wouldnt have to be tethered with a wire on my laptop for internet. However, I've wasted time with tech support which I can barely hear or understand.I'd like to get this working, otherwise I'm sending everything back, wireless router and laptop.I can ping both the linksys and tplink from my laptop with no problems.I can get connected to the tplink wireless router without a problem but I cannot get to the internet.
View 6 Replies
View Related
May 7, 2011
how can i find my net work key to ad wireless on my sacond computer
View 1 Replies
View Related
Dec 29, 2011
WD drive conected to router, doesn't show on network. Link light on drive & router lit. What I miss?
View 1 Replies
View Related
Sep 6, 2012
how do I find my network security key on my Verizon router 37H9B
View 2 Replies
View Related
Sep 26, 2012
I'm trying to re-rout a signal from one router through a computer to another router. The setup goes as follows:
Connected Network > My computer > Ethernet cable > Second router
The problem is, Windows recognises the router as an "Unidentified Network" and I have scourged the net for a solution. It worked when I had Vista. The router is a WRT300N Broadband router. It's quite old, but not outdated. Got it 3 years ago.
View 11 Replies
View Related
Oct 20, 2012
how do i assign a password for my router if its an open network?
View -1 Replies
View Related
Jan 6, 2013
i need my pass word and security cod to set up my netflix
View 2 Replies
View Related
Aug 17, 2011
I have a Netgear Adsl2 modem / Router with 4 ports in the rear.The two computers are going to be next to each other and I was just planning on plugging the new PC into the back of the netgear modem to have internet access on both along with the original PC for internet access. NP there.Is it now possible to have the two PC's connected to each other throught the Router/modem to share files and for my children to play games against each other...I.E home network with 2 pc's talking to each other through the net gear modem/router? Both machines only have the one Lan input (I'm pretty sure)Both running windows 7 (one 32bit and the other 64 bit)
View 3 Replies
View Related
Jun 4, 2012
I was a bit of a loss and maybe it's because I have been out of the game for a long time but I came across a disturbing development. I call century link because my router was not connecting at the proper speed of 7 mbps. That problem was easily remedied over the phone but the lady said she could see several devices connected. This lost me a bit because I have a double router configuration. The Actiontech PK5000 i turned into nothing more that an internet modem. I disabled the DHCP and configured my Linksys E1200 for all the internal DHCP so there is only one cable going to the PK5000. I should technically speaking look like one user on there network with natural protection from the second router. I may be kidding myself or man I'm getting old but if someone can tell me how that works it would be fun to know and what would even be funner to know is how to stop it
View 1 Replies
View Related
Nov 24, 2012
why one of my laptop suddenly has no internet access.no matter what I tried its still does not connet.It is show that its connecting to my main network but it said no internet access.
View 7 Replies
View Related
May 11, 2012
I am having a hard time configuring my Access point. I have a DSL Router connected to our telephone line and it works fine wirelessly, Yesterday I purchased TP LINK Router to configure as Access Point to extend wireless signal up to the second floor. Now, I am wondering, should I do some re-configuration on my DSL Router before configuring my TP Link Router? Guys, Please share your thoughts and if you have knowledge on how to configure my 2nd Router to my WifiNOTE: I followed the user guide manual that came with my TP LINK router but it is no USE. I just need to know if should I reconfigure my 1st Router in order to communicate with my 2nd Router.
View 4 Replies
View Related
