Network Shares Disappear After Router Reboot?
Jul 20, 2011
I have a wired network that has the following connected:1) My Main PC (Quad Core) with all the Shared HDD's (Windows 7 Ultimate 64bit)2) My Wife's PC (HP Touchsmart) Windows 7 Home Premium 32bit3) WD TV LiveHub (Media Player)4) WD TV Live (Media Player)5) My Second PC (Windows 7 Ultimate 64bit)6) My Third PC (Windows 7 Ultimate 64bit)and occasionally my laptop which has Windows 7 Ultimate 64bit and Ubuntu 10Often my ADSL connection drops and I have to restart my router to get it running.Once I do that, and My Main PC is on AND any other PC is on too, the network shares disappear. If I go to "Network" on any PC only the Media Servers are shown and if I go to the Media Players, no shares are shown.If I turn off all other PC's and THEN restart my main PC all shares appear again.I have been searching the Internet but haven't found anything that worked.
View 7 Replies
ADVERTISEMENT
Jul 10, 2009
Ok, another Network problem I'm having is that the 9 shares that I have on my Windows 7 machine are shared among a small network with a couple of Vista machines, 1 Windows 7 machine and a couple of XP machines and even one Mac. Every once in a while when users on the XP machines try to use the shares, they are prompted with a username and password, and no matter what is entered they are not allowed access, even a good account and password on the Windows 7 machine.
They are told that the shares cannot be found, however they can still ping the Windows 7 machine, and they previously used the shares for days without problems. A reboot of the XP machine has no effect, however rebooting my Windows 7 (then manually readding the shares) clears it up. Again, WHY
View 0 Replies
View Related
Jul 10, 2009
What would cause 9 shares that I have on USB drives to disappear every time Windows 7 is rebooted? I have to recreate them every time. I did a test with another Windows 7 machine, using 1 USB share, and the first time I shared it with the 'Share with Specific People' adding Everyone to the list, and it disappeared upon reboot. I then did it through the Advanced Sharing in the Properties of the folder, rebooted and it actually remembered it. However doing it through the Advanced Sharing on the PC with 9 shares, it still didn't remember them after reboot. Why is there 2 different places to share anyway? I want to think 1 is for remote users and 1 is for local users, but then why don't they just say that, do they have to make it so confusing. It's totally not intuitive.
View 3 Replies
View Related
Jun 21, 2010
i've stumbled upon this weird bug when i was trying to install .otf fonts. fonts installing fine and applications can see/use them with no problem. i can see fonts in 'fonts' list, everything is fine until i reboot windows. when windows comes reboots neither apps nor fonts list is showing these fonts. when i'm trying to install them again, i'm getting a message that they are already exist and if i want to overwrite them. after reinstalling fonts, everything is fine again until another reboot. i tried deleting them and reinstalling, changing permissions, etc., nothings seems to be working.
View 6 Replies
View Related
Feb 25, 2012
I have a SATA DVD RW Drive. The drive would appear when I boot my computer and I can use it with no problem.
Occasionally...,especially when I leave my computer overnight, my DVD RW would disappear. I couldn't locate it from "My Computer" or "Device Manager". However when I reboot my computer the drive would appear again.
View 3 Replies
View Related
Jul 10, 2009
I have a linux samba share setup that I use for my file server. It's setup for guest access.
Recently when I tried accessing the server, it asked me for a username and password, which it shouldn't. So I typed in guest, didn't work, I typed in the root account, didn't work.
My roommate can still access the server just fine. I checked all the permissions on the linux box, and it has to be an issue with my computer. I had my roommate setup a shared folder on his computer, and I couldn't access it either.
I'm not sure what happened to cause this... one day it worked, the next day it didn't. I tried a system restore thinking maybe some update caused an issue, but that didn't do anything. I've checked various registry keys, made sure the proper services are running. I'm lost as to what could be causing this...
View 9 Replies
View Related
Sep 1, 2009
Just set up Windows 7 RTM on one of the machines in our office and I'm noticing something very strange: when we try to open a network drive, it's taking upwards of 40 seconds. You double-click on the drive and then just sit there as the green bar just CRAWLS across the address box and then finally displays the contents of the drive.
What's worse is that it does the same thing every time you change a directory on the network drive.
Opening network resources via URI does the same thing. It's just strange.
I've already disabled RDC on the machine, and it hasn't made a difference after a reboot.
Has anyone seen anything similar? Any thoughts?
View 9 Replies
View Related
Oct 12, 2009
I installed Windows 7 Ultimate saturday night (I got it early to have a release party). It was an upgrade from Vista Ultimate.
I can't access any of my network shares. I am running a NSALite2 server with 3 drives and a Linksys NAS200 with 2 1Tb drives. I can access both via HTTP, but can not access them via a network share. I can ping both of them as well. I am using a laptop and connecting via wireless N. I can get on the Internet just fine. I can access the drives just fine on 2 XP machines on the network. I was able to access these drives previous using Vista Ultimate.
I have read some about changing the encryption from 128bit to 64bit, but was having trouble finding where to make this change.
Any ideas?
View 9 Replies
View Related
May 27, 2012
Here is my current network config:
2 Windows 7 PCs (Home Premium)
1 Vista PC
3 Windows XP PCs
1 Netgear NAS
all in workgroup "WORKGROUP"
all assigned static IPs
Up until today every computer could see every computer on their respective My Network Places screens. The XP machines could see all the shares on the NAS and could see and connect to any other computer by just double clicking. This morning the windows 7 PCs can see each other + the Vista machine and can see the NAS listed under storage but not under 'Computer' like it used to. The XP machines can see each other but not the NAS.
Every computer can ping any other one. Any computer can type the computer name (e.g. \NASshare works) and that gets it temporarily instated into the network places on Windows 7. We recently went through and assigned static IPs to every computer (before the issue). Resetting them back to DHCP isn't really an option (unless it's the only way to fix the issue, but I don't think it should be)
I've combed the net and I can't find anything that directly solves my problem. I've checked permissions, checked that simple file sharing on XP was off, checked that it's being let through firewalls, checked that file sharing was enabled in the network settings windows.
View 4 Replies
View Related
Sep 4, 2009
When i try and access a network share windows seems to be searching for files on my HD. Also i cant find the "display run command " option in start menu properties.
View 6 Replies
View Related
Oct 25, 2009
Windows 7 install went perfect. Loving it so far.
Came home and hooked up to wireless network. I can see my server and the 5 shared folders available. But I am unable to connect to any of them. Each time it says
"Windows cannot access serverstorage"
"You do not have permission to access server.
Any ideas?
FYI Yes I have network discovery on etc etc. These ARE password protected folders, but it's not even prompting me for a user/pass. When I attempt to Create a network drive and use different credential which is an account on that machine it says "it's currently mapped using a different user-name and password".
View 2 Replies
View Related
Feb 4, 2009
3 computers 1 with Windows 7, 2 others with Vista. On my main Vista machine I have drives F, G, I and K shared. I can see and connect to each share on my Vista laptop. But the Windows 7 machine can access the main Vista computer, display all the shares.
But I can only access the shares for Public and K share. F, G and I shares give me the message "Windows cannot access computerf ", you do not have permission to access.... " etc. I have double and triple checked the settings for the shares on the Vista machine and I have full control on all shares set in permissions.
I've read as many threads as possible, but they all either do connect or don't. I'm in between as the Windows 7 machine will connect to some shares, but not all.
Any ideas of where to start?
View 4 Replies
View Related
Jan 26, 2010
I currently have a Netgear rangemax wnr834bv2 running ddwrt and acting as a repeater for a linksys vonage router. This setup has worked for a while to give wifi coverage to my house. I currently have 1 xp home computer on via wired connection to the linksys router, 1 xp pro computer on wired connection to the netgear router, 1 xp media center laptop on a wireless connection to whichever router is closest. Until thursday of last week, i also had 1 win7 computer connected wirelessly to the netgear router.
Last thursday, for some unknown reason, i woke up to find that everytime the windows 7 computer tried to connect, the router would reboot and give the computer limited connectivity. If I rebooted the win7 computer, then i could connect, but the connection would stay active just long enough to check email, then the router would do a soft reboot and would then give limited connectivity again. Other computers connected wirelessly or wired, would simply re-establish the connection and work fine.
I chose a restore point before thursday on the win7 computer and it works, only for about 12 hours or so, then i come home and have to restore again. I have turned off active updates and i check to see if anything has been changed, but i cannot find anything.
Has anyone heard of this happening or would know what to even check. So far, i bought another router to test with just 1 new 'win 7 compatible' router and it did the same thing. i'm just stuck.
View 2 Replies
View Related
Jul 19, 2011
1x PC (Mine, and i'd like to the be the admin Win 7 Ultimate X64) with internet access via the router and connected to a NAS 2x PC's Win 7 32bit with internet access via the router and connected to a NAS 1x NAS to be shared by all 3 PC's 1x NAS 1x 4 port router
In simple terms the 2x Win 7 32bit PC's are for my children hence why I would like admin control of the computers. They will need a connection to the internet and share the same NAS. The Win 7 Ult X64 computer will also be connected to the NAS as well as the router for internet access.
All PC's and NAS to be connected with cable as opposed to wireless. whether this would be easy to set up? What cable would I need between the NAS and the PC's?
View 2 Replies
View Related
Sep 21, 2012
I have a new HP Pavillon g4 with Windows 7 Home Premium installed and connect to the internet via an external antenna to a hotspot nearby. I'm trying to create a Home Network or Ad-Hoc computer to computer network without a router and without cables, using my Windows 7 computer as the master, receiving the internet, and my second computer running on XP SP2 as a slave. I have tried ad-hoc setup, but my XP does not connect to the internet (the XP connects without problem when I insert the external antenna directly). Does anyone know if it is possible to share internet between Windows 7 and XP and how to go about it? I googled for hours and tried different setups, all failed. I have successfully installed the "Virtual Router Manager", it works well between Windows 7 computers or tablets, but not with XP.
View 14 Replies
View Related
Aug 30, 2011
Every now and then the internet will stop working on my PCs. I have 2 near me at all times and both will stop working, a wireless lappy and wired desky lol.It will come back in a moment or in a little while. I havent figured out if its the router or the cable modem.
View 3 Replies
View Related
Jul 25, 2012
I work in a small office and use a laptop with Windows 7. We use the same router and have wired internet. His computer is connected to a "Network 4" while mine is connected to the private wireless internet system we've set up. He can't connect to any other connections on his computer while all the other connections around our office is visible on my laptop.
View 1 Replies
View Related
Feb 19, 2010
For some reason my netgear router is not showing on the network page of 'my computer'.it used to show up as 'Netgear Router' and if i clicked on it it would ask for my login and then display my configuration setting etc on a browser page. If I click on a link I have setup on my browser, it navigates there as normal.Not a humungous issue, but although I have tried a system restore, it still does not show up as expected. Connectivity is fine, as per normal.
View 9 Replies
View Related
May 24, 2012
I do not have a manual for our router. I do not, therefore, know the username, password or the number to use as a web address, which is what Kim Komando is telling me I need. How can I secure the router so no one else can log on to my network?
View 1 Replies
View Related
Jun 30, 2009
I have been having a problem with my home network crashing when using WIndows 7. For some reason, whenever I tried to access shared folders or computers on my home network, windows 7 would show "limited connectivity" and I would lose my internet connection. The crazy thing, is that Windows 7 was somehow causing my router to fail because all of my networked computers lost their connections (wired and wireless) until I reset the router and restarted windows 7.
I recently turned off "network discovery" in my network control panel in WIndows 7, and the problem seems to have stopped. But now I still can't access shared computers, folders, or printers. Does anyone have any idea what is going on?
Router: Belkin wireless G router with the latest firmware
Adapter: Realtech integrated into my gigabyte motherboard
Windows 7 build 7100 64bit (Although I've had the same problem with other early Windows 7 builds)
View 2 Replies
View Related
Mar 25, 2012
I have two Windows 7, two win xp (4 in total) connected as file sharing network.1. hen I turn the router off and then on, the win xp computers see all the rest, but Windows 7 computers see no one, they still have the internet ability.2. If I turn on the Windows 7 computers first: the 1st sees nobody, the second sees the first but not the consecutive computers. No home group.
View 3 Replies
View Related
Aug 16, 2012
I have a Verizon router and I purchased a NetGear N900 wireless dual band usb adapter for my son's computer. I was going to test the N900. It is for college.The N900 will not connect. I do have three other laptops that do connect and work ok. The N900 has WPS but the Verizon router does not.So I have to use the SSID, 'wep' option, and the wep key. The N900 tries to connect and stops trying after about 20 seconds or so. The N900 varies from 4 to 5 green bars. N900 installation was followed and went smoothly and the new software version was used. We are using Windows 7 Home Premium 32bit on my son's computer.I also purchased the Western Digital My Net N750 router for college. I have no way to test everything at home. It does have WPS so at the college I hope everything works.
View 2 Replies
View Related
Nov 6, 2009
I have a home network connecting 4 computers, 2 print servers, and a media bridge to a Linksys wireless router. Pretty much the same setup from XP to Vista to Windows 7.
After installing Windows 7 x64, I am seeing a device under the category "Infrastructure (1)" on my Windows Network screen. It identifies itself as "WNR843Bv" - a Netgear router - which is definitely NOT a device on my network! Maybe it belongs to a neighbor, I can't verify this. Other than this - the network is functioning as expected.
I use WPA2 encryption and MAC Address filtering on my Linksys router, so I am (reasonably) confident that this device is not connected to my network. However, I am not comfortable with this.
Can anyone help me understand :
(1) What is an "Infrastructure (1) device?
(2) Why is it showing up on my Network screen in Windows 7?
(3) How can I get rid of it?
View 9 Replies
View Related
Jul 19, 2012
don't know secutity key pass word
View 1 Replies
View Related
Feb 6, 2013
My son has a problem on his PC where everytime he starts up his computer or reboots he can't connect to the internet and the little network icon in the corner of the screen has a yellow warning sign. If you disable the network adapter and then re-enable it then the problem goes away.
View 4 Replies
View Related
Jun 7, 2012
My computer has been acting up lately,I haven't made any changes to my computer or anything but it seems to just not want to connect to the inter for more than 5 min. My othe computer on the house seems to connect fine, but mine will only connect for 5 min the can't find the network for 15 min and it does this repeatedly. I tried updating the drivers but there were no updates available. I ran the troubleshooter and it couldn't find a problem, it just said to make sure I was in range of the router, which I am because my computer was working fine in the same spot about a week ago.
View 12 Replies
View Related
Feb 24, 2011
I have a wireless router for a desktop...want to use it for mini notebook, lost security key!
View 5 Replies
View Related
May 31, 2011
I am running Windows 7 Home Premium (64 bit) on a Dell Inspiron 560. I am using a DI-524 D-Link wireless router. I have an Acer Aspire One Net Book running Windows XP Home it is equipped with an internal wireless network adapter. I can connect/communicate with router and access the internet with no problems whatever. However, when I connect an external wireless network adapter e.g. Alpha AWUS036H I cannot get a connection when I disable my internal network adapter. I have also tried the Trendnet TEW-424UB USB external wireless network adapter and the symptoms are exactly the same. If I leave home and use another Wireless point of access I have no trouble connecting using the external adapters which means the problem is confined to my personal home network. I have removed and reinstalled my router, and the network adapters drivers etc. I have uninstalled my Norton Firewall and and disabled my Windows firewall to no avail. I have removed my WEP security features and tried to run it open with no improvement. I have connected the external network adapters on a neighbours computer running XP to see if I could connect to my home network. That didn't work as well. Bottom line is I simply cannot get an external wireless network adapter to work with my router. Yet my internal netbook adapter connects with no problems at all.
View 2 Replies
View Related
Oct 28, 2011
I am connecting to my office computer from home using remote desktop connection.
My office computer is in a network under router. So I forwarded a port 3389 to my computer's internal ip address. Now I want to connect to another computer at my office from home. I tried forwarding the port 3990. But I was not able to access using remote desktop connect.
What should I do to access the second computer. Will 3390, 3391 ... will not work?
View 7 Replies
View Related
Jan 27, 2012
Have a small home network that has 1 desktop, 3 laptops, and tablet PC. The laptops are wireless and use Vista Home Premium and Windows 7). The desktop is hooked directly to the router via Ethernet (an Acer the problem PC).The router is WRTU54G-TM with the latest firmware, with security on it set to WPA-Personal and TKIP encryption. It hooks into cable modem. The Acer has a NVIDIA nForce 10/100 Mbps Ethernet NIC that came with system. Driver is 73.0.6.0 dated 4/30/2009. The system is less than a year old. System is Acer AX3400G-U4802 bought from Wal-mart.Windows 7 Home Premium 64 bit ssigned to same Workgroup as other PCs.The Acer had problems a month ago when the power went off and on a couple of times. It then would not display a screen on the monitor. The fan and system would come on but not beep. Sent it in to Acer and they returned it saying nothing was wrong. Was able to power it up initially, but then had the display issue again. After turning system off and on multiple times I got it to come up. It won't connect to the router. Doesn't see it. In the ipconfig it was giving a 169 IP address. Seeing that DHCP was not working, I manually changed the IP to what is needed to connect to the router and used the router's gateway IP. Still no joy. The NIC cable should be fine. Tried others. Same result.
I am ready to return it again to Acer and tell them about the Internet issue. Oh, by the way checked my wall outlets and all are getting enough juice. May have to invest in a backup power supply. Here is a detail of ipconfig that I have tried (can't do advanced Windows tricks as this is the Home Premium addition and Microsoft has dumbed it down ) :
===================
C:Windowssystem32>ipconfig /release
(and the same message for ipconfig /renew) -
Windows IP Configuration
An error occurred while releasing interface Loopback Pseudo-Interface 1 : The sy
stem cannot find the file specified.
[code]....
View 3 Replies
View Related
Feb 3, 2012
I recently switched ISPs to CenturyLink. While faster and cheaper then CableOne, it doesn't have a cap. CableOne offers 50mb for a few dollars more but has a 50g cap. This may effect me big time as I'm a big fan of Netflix streaming via Roku. Thing is, I can't monitor what's going thru Roku so I have no idea how much over a cap I would go. I use NetWorx for my local computer and it works well. It says it can't see the router because the router does not support SNMP.Anyone know of a program that would allow me to monitor all traffic on my network? Currently, I have my computer, my iPad, my wife's Kindle, her computer and the Roku.
View 2 Replies
View Related
