Unidentified Network - Hooked Directly To Router
Jan 27, 2012
Have a small home network that has 1 desktop, 3 laptops, and tablet PC. The laptops are wireless and use Vista Home Premium and Windows 7). The desktop is hooked directly to the router via Ethernet (an Acer the problem PC).The router is WRTU54G-TM with the latest firmware, with security on it set to WPA-Personal and TKIP encryption. It hooks into cable modem. The Acer has a NVIDIA nForce 10/100 Mbps Ethernet NIC that came with system. Driver is 73.0.6.0 dated 4/30/2009. The system is less than a year old. System is Acer AX3400G-U4802 bought from Wal-mart.Windows 7 Home Premium 64 bit ssigned to same Workgroup as other PCs.The Acer had problems a month ago when the power went off and on a couple of times. It then would not display a screen on the monitor. The fan and system would come on but not beep. Sent it in to Acer and they returned it saying nothing was wrong. Was able to power it up initially, but then had the display issue again. After turning system off and on multiple times I got it to come up. It won't connect to the router. Doesn't see it. In the ipconfig it was giving a 169 IP address. Seeing that DHCP was not working, I manually changed the IP to what is needed to connect to the router and used the router's gateway IP. Still no joy. The NIC cable should be fine. Tried others. Same result.
I am ready to return it again to Acer and tell them about the Internet issue. Oh, by the way checked my wall outlets and all are getting enough juice. May have to invest in a backup power supply. Here is a detail of ipconfig that I have tried (can't do advanced Windows tricks as this is the Home Premium addition and Microsoft has dumbed it down ) :
===================
C:Windowssystem32>ipconfig /release
(and the same message for ipconfig /renew) -
Windows IP Configuration
An error occurred while releasing interface Loopback Pseudo-Interface 1 : The sy
stem cannot find the file specified.
[code]....
View 3 Replies
ADVERTISEMENT
Sep 26, 2012
I'm trying to re-rout a signal from one router through a computer to another router. The setup goes as follows:
Connected Network > My computer > Ethernet cable > Second router
The problem is, Windows recognises the router as an "Unidentified Network" and I have scourged the net for a solution. It worked when I had Vista. The router is a WRT300N Broadband router. It's quite old, but not outdated. Got it 3 years ago.
View 11 Replies
View Related
Nov 11, 2010
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
View 9 Replies
View Related
Jun 25, 2012
months ago before changing a router I had an AP, and a 2nd router set as a Client Bridge, so pc's on one could detect pc's on the other. Can't recreate that for some reason [another long thread] but what I did get up and running is 2nd router in Client [wireless client] mode, so the 2nd router is pulling its internet access from the AP, but the addressing on the 2nd router is different [DHCP is enabled, and the router's ip is different: 192.168.2.1, whereas the AP is .1.1 and doles out its devices as .1.110 & up ... which is strange]
So, I have a 7 pc behind the 2nd router [the client router] which is addressed as 192.168.2.122
how do I directly access that PC from one that is wirelessly connected to the AP [i.e. an address of 192.168.1.117] ??what's the syntax?
View 5 Replies
View Related
Jan 24, 2012
I have a small network, running 5 computers. One of these computers needs to stay offline, but is needing to connect to the network to backup on the backup drive.Is there a way I can use windows firewall to block all internet access to this computer?
View 8 Replies
View Related
Aug 30, 2012
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
View 3 Replies
View Related
Dec 1, 2011
Today, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
View 2 Replies
View Related
May 12, 2011
Recently when I try and connect to the internet my wireless connection network says it is an unidentified network with no internet access. This never happened before.
View 2 Replies
View Related
Oct 22, 2009
Okay so I've installed windows and everything is working okay except i can't connect my laptop to my computer via LAN because it won't let me change it to a HOME NETWORK. It is just gets set to an unidentified Network. any possible suggestions?
Also I've look at removing this from the services but its not running it when i go under task manager, unless it somewhere else.
"##Id_String2.6844F930_1628_4223_B5CC_5BB94B87 9762 ##"
View 1 Replies
View Related
Nov 11, 2011
Is there a way to get a Dish-network remote control to work directly with WMC without a satellite receiver, i.e. DN Remote Control to WMC PC to TV?
View 1 Replies
View Related
Feb 8, 2012
I have been using my home internet in my new place for a couple of weeks fine, yesterday morning when I tried it it had the limited access yellow triangle and wouldn�t connect.I reset the router and connected to the wifi on my iphone which worked fine, I checked the DNS numbers were the same as on my iphone which they were and I had not changed any settings. I spent the entire day yesterday online looking for solutions, I�ve reset the adapter, disabled it etc, set the ip and dns to automatic and back again etc etc.
When my wifi tries to connect to my home internet it takes a LONG time to identify and then identifies it either as an unidentified network and/or public. Even when I change it to home it changes it back to public or just doesn�t let me change it to home and says try again later.
Ps- I just tried disabling then re-enabling the protocol 6 on the wifi which isn�t working and it just said �in order to configure TCP/IP, you must install and enable a network adapter card. But then it just let me configure it and is still connected but with limited access and public network.
View 9 Replies
View Related
Sep 6, 2009
I just moved to a new home, and i cannot connect to my local LAN ! I am on a Mac right now ( arghh ) and the Internet works fine on this one.
I am using a cable to a router, wich is connected to a modem. The router is fairly old but has always worked fine ( using a direct cable doesnt work aswell ). Windows 7 says it is connected to a 'Unidentified Network'. The ipv4 settings for the adapter are; Automatic ip/dhcp.
ipconfig gives an ipv6 address. The automatically generated ip is: 169.254.241.20. There is nothing at Default Gateway. The driver settings are correct, as far as i believe. I downloaded the latest x64 Windows 7 marvell yukon drivers.
I disabled sleep mode on my pc. I don't have the Bonjour service running. On the Mac, i only had to enable DHCP and it recognized the network correctly. These are the ip's that it got:
ip: 83.87.107.135
subnet: 255.255.248.0
router: 83.87.104.1
This is getting frustrating since i cannot see where the problem could be.
here are my specs;
Asus p5w DH Deluxe
win 7 ( 7600 )
q6600
2 integrated network adapters on the mobo: Marvell Yukon 88E8053 pci-e Gigabit Ethernet Controller
View 7 Replies
View Related
Jul 18, 2012
I have 2 different laptops. both running Windows7 and connecting to the internet wirelessly. within a few days of each other they both began to display "Currently connected to: Unidentified network No network access" and they will not let me get on the internet. It is not my router becuase It shows the same thing no matter where I try to connect. I have tried my gym and a local restaurant that I have always had success connecting to before. Furthermore my WindowsXP desktop is directly connected and is connecting to the internet without any problems. My laptops are both running AVG for antivirus.
View 4 Replies
View Related
Apr 8, 2011
my laptop doesn't connect to my wireless network, neither by cable (wired).
View 9 Replies
View Related
Dec 31, 2011
Yesterday it worked and when I booted today it didn't I have absolutely no idea what the problem is and I have checked everything I know with no use.
- I am using d-Lan (PowerLan) and have had no problems with it until today.
- My router, modem and the d-lan devices are functioning properly which I have tested multiple times so I'm sure the problem lies with my computer.
- I have tried Troubleshooting with no effect
- It isn't an IP conflict
- It isn't a 3rd party program (I started it in safe mode, same problem)
- Internet still works over my W-Lan but is incredibly slow and unstable
View 6 Replies
View Related
Dec 26, 2009
For boxing day, I bought myself a new Computer case, a Cooler Master HAF 932. After setting it up and booting my computer, without any problems, my Internet would not work.
I attached the Network & Sharing Centre screen to show you what it says. I've tried many things, switching cables, direct input from modem (I use a router), and all sorts of guides that have similar problems.
View 9 Replies
View Related
Mar 7, 2011
I have got a desktop computer and a laptop at my home. I have got a single internet connection. So I added an extra NIC card to my desktop PC. Then I connected my desktop to the internet and then connected my laptop and desktop using a crossover network cable. Both my machines have got win 7 installed. So when I created the network my laptop identified the network and allowed it to me to choose between home, work and public networks. I am able to share the internet too. But my desktop keeps on saying unidentified network which prevents me from joining my home-group.
View 2 Replies
View Related
Jul 27, 2009
Ive just installed Windows 7 7600 HP on to one of our work PC's and it says its connected to an unidentified network. I cant change it to work network or even Home network but the strange thing is its working fine. All our other PC's can see it and share files on it etc and i have internet access on it.
This is the second time ive installed HP and the second time this has happened. In the past ive been using Ultimate and this didn't happen.
We use static IP addresses for our internal network with no DNS server.
Anyone got any ideas how i can change this network location. Im using HP as im testing it out for when my copy arrives in Oct but if this is a problem related to HP i might think again.
View 3 Replies
View Related
Nov 30, 2009
about a week ago I started to get an unidentified network issue on my laptop.
here is how it basically works. I will see the network i want to connect to, and click on it. after which it will tell me that it is taking awhile finding the network, and then connect me to a unidentified public network. and it will tell me to the left of that that I am connected to the network I tried to connect to, but I have no Internet access.
I have tried turning the adapter off and on, restarting and I have deleted bonjour, (I think) and can't figure out what it might be. help please?
View 7 Replies
View Related
Jan 14, 2012
I am facing Unidentified network problem
View 3 Replies
View Related
Aug 10, 2012
I just bought anew Acer Laptop with Windows 7. When I try to connect it to my home network it shows a good signal strength but it will not connect me to it. I get a box saying it is an Unidentified Network. We have gone through all the normal internet connection paths and reset the router. We are able to access an Iphone with no problem. WE took this laptop to my sons house and could not access his home network either. Receiving the same Unidentified Network message when we tried. We called Acer and they wanted us to pay for a remote access to this brand new laptop. We refused. We will take the laptop back to the store first because that is not right.
View 1 Replies
View Related
Sep 5, 2011
About two months ago I had some money problems and was forced to move in with my dad. I have a 20GB Xbox 360 and Xbox Live. I knew my dad had the internet so I could still use Live.I have been doing so via an Ethernet wire going from my laptop (connected via wireless to the router) to the Xbox.
View 2 Replies
View Related
Jun 10, 2011
I am working on my bosses personal desktop. It had windows xp 32bit. Due to a virus the hard drive had to be wiped. He purchased windows 7 (32bit) to be installed.It's an older hp (about 3-4 years) with a intel pro VE 100 network card.the hard drive was completely wiped (including the partitions) and windows 7 32bit was installed.dispite what i select as the network type, it conitnues to set it as an unidentified network. I have tried reinstalling, wiping it again and reinstalling. It conitnues to set it as unidentified
View 1 Replies
View Related
Apr 19, 2011
My pc is connected a router with an ethernet cable. The router was reset and now the pc cannot connect to the internet.The message I get is,unidentified network access type No Internet access,work network connections,local area connections,we have rebooted, turned computer off then on, reset back to a previous time, changed the ethernet cable
View 9 Replies
View Related
Apr 23, 2011
Windows 7 64-bit Home Premium
ACER Aspire X3400
Nvidia Nforce 10/100/1000 ethernet
Cable internet
SB1502 Cable modem
When I try to connect to the internet, it just says "identifying" then says it is an "unidentified network". I've tried:
Resetting the modem
Checked all cables
Uninstalled and reinstalled the drivers
Disabled & enabled the drivers
It's set to automatically connect to DNS
Updating the ethernet with the latest from Microsoft
Ran ipconfig /release and renew
Tried another modem and new cables
Tried other houses with DSL & Cable internet
I installed a USB wireless device which worked when I tested it in wireless areas. But so far nothing has worked for the wired part. At one point before all this started, the internet worked intermittently and would work at other houses perfectly. So I assumed it was my modem or connection at my house. But then I plugged another PC into my modem and it worked instantly. So I know there is no physical problem with my connection, modem or cables.
View 9 Replies
View Related
Jun 15, 2009
I decided to just post this as a new thread, as it appears to be getting positive results for most people. I highly recommend it anyway, as you will eventually encounter this if you apply all of your updates.For those of you reporting problems with your network after updating MS Office or installing Adobe CS3..If you are having Internet connection problems related to "Unidentified Network" showing and the "!" over your NIC icon, then this should take care of it: [code] If you do, stop it and disable it. It is actually the Bonjour DNS Responder Service, and I believe it is the cause of the "Unidentified Network."The Unidentified Network disappeared after stopping this service and a quick disable/enable of the NIC, restoring Internet access.I Actually just rebooted, edited this post, and then re-enabled the offensive service to see what would happen...Immediately after enabling the NIC and this bastard service, the "Unidentified Network" returned...stopped it, disabled it, disable/enable NIC...Internet back up and running and no "Unidentified Network." (woot - woot!)
I experienced this in both build 7100 and 7127...I am running 7127 now x64 - and discovered this fix just last night...so far so good just rebooted and then edited this post...I believe this fix will solve 7100 build issues too; however..I have not tested 7100 again yet.I also re-enabled Win 7's Discovery Mapping services, but always leave IPv6 disabled just because I am not using it.another two reboots, and a hard disk addition, and no problems with the Internet! - If you tried another fix such as changing the address of your network adapter, under "Advanced" - this is not necessary...I set mine back to "Not Configured." Everything is working fine as long as the Bonjour service is not running.. [code]
View 9 Replies
View Related
Jan 18, 2012
I recently had a virus that I had removed, but now that its gone, I still cannot connect to the internet. It does not detect the ethernet cable when its plug in, as in the LED does not light up green.This is what CMD shows me when I do ipconfig /all Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.
C:UsersAdministrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : ADos-PC[code].......
View 1 Replies
View Related
Feb 19, 2012
My computer had been working fine and while I was watching a movie on my computer the internet randomly gave out (wasn't streaming the movie or using the internet to watch it). Now I can't connect to the internet and it says that the network is Unidentified. I've tried a bunch of fixes such as uninstalling my drivers and letting windows reinstall them, changing my mac address, resetting the router, checked everything was plugged in, disable bonjour, tried releasing my ip and renewing it. I've tried so many things that have popped up on google that I have no idea what else to do. I don't want to reformat my computer if I can avoid it. If anyone has any idea I'd be so happy.I'm running Windows 7 x64 Home Premium. Other computers on the network are able to connect to the internet and I can access files from other computers on the network.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersTallus>ipconfig /all
Windows IP Configuration
[code]....
View 9 Replies
View Related
Jun 7, 2012
This seems to be an old problem going back to win7's initial release yet people are still having the problem now. Everybody told me to install win7, "it's awesome", "everything just works", etc...and here I can't even get online.Anyway, what I can tell you is that I'm on a wired connection. Everything else connected to the same router works fine. I've got another computer running Vista, works fine. My xbox & ps3 both work fine. This computer that's having the problem was working fine when I was running XP and Vista on it. So it's clearly an issue with Windows 7.I've checked for the Bonjour service I saw mentioned in other threads, don't have it. The next thing I should probably try is assigning a static IP manually. I'm fuzzy on how to do that since I have no experience with win7.
View 9 Replies
View Related
Nov 30, 2010
As per a lot of other people on here, I'm having issues with connecting my desktop PC to my BigPond router. It will connect via wireless (have an installed D-Link DWA525 wireless card) but will not connect via LAN.I've changed the IP, DNS and Default gateways to the same as the other working PC's in the house, but still no luck. The mobo uses Realtek GBE Family PCI-E controllers, but for some reason it won't move off 10Mbps (even when I try to tell it to change this).I have tried new drivers, and have tried uninstalling drivers and letting windows install its own. None have worked. I've disabled V6, didn't work.My IPCONFIG ALL shows up the following: [code]
View 7 Replies
View Related
Apr 27, 2011
Im having a big problem with connecting to the internet. It was working fine a couple of days ago but now i cant connect to the internet at all. I have a windows 7 compatible laptop and google chrome is the default internet Im using. I have checked the wireless network connection status which reads "IPv4 Connectivity No network access" "IPv6 Connectivity No network access" "Media state Enabled". The unidentified network is currently set at Public network and cant be switched to anything else. l have spent 4 hours trying to resolve the issue of reconnecting but have had no luck.
View 1 Replies
View Related
