Assign A Password For Router If Its An Open Network?
Oct 20, 2012how do i assign a password for my router if its an open network?
View -1 Replieshow do i assign a password for my router if its an open network?
View -1 RepliesI need assistance with my router, serial # CSV01H7A3323 broad band router. I do not remember the password
View 2 Replies View RelatedHow can I find out what the password is on my router because I forgot it? I'm trying to log on with my wireless laptop.
View 5 Replies View RelatedI just purchased an Asus rt-n66u Router. Found Here: [URL] I haven't hooked it up yet, as it's a Christmas gift to me from my wife and she don't know it yet...lol...So, I'm not sure if there is any software that comes with it to do such a thing as it's wrapped under the tree...
Basically, I want to hook my 3TB External USB HDD to the Router, so that all our devices can share the media on it, but I want it password protected so if someone else comes in the House, they can't access anything on there and only we are allowed to access it. I'm not sure if the whole drive can be locked or just specific folders on the drive.
Ohh, I'm running Windows 7 Pro x64, my other devices are all random. Including Mac, Windows XP, Windows 8, Windows 7 Student ed...
I need a password for the DLinks 300 router? CD broken.
View 12 Replies View RelatedI need a password for the DL 300 router? CD broken.
View 1 Replies View RelatedHow to change password on router?
View 1 Replies View RelatedHow to change password on router?
View 3 Replies View Relatedi have a netgear32 router. now i need a password to hook up wi-fi from iphone to home computer. how do i find password?
View 3 Replies View Relatedtrying to set a password to unsecured router
View 2 Replies View RelatedI have a notebok with Windows 7 Home Premium. It has an Edimax EW7108PCG wifi adapter on it. It's driver is the Ralink RT61.
I have the problem, that the password for the router is not saved, and I
have to enter it at every start up.
I have a linksys router which I never secured with a password. I was able to use it with no issues until I added a password. The router works fine, I've connected my phone , Xbox, and laptop with no issues. My upstairs computer in the other hand I can not connect. It asks for my password and does not connect. It also asks for network authentication.
View 1 Replies View Relatedi have a problem i need to change my password in my router but i cant see where i m going?
View 1 Replies View RelatedI have this problem. My tenda wireless router that I was using for a long time was transferred to the other PC. How could I get back the connection 'coz now it requires password at all. I've entered passwords but it didn't work. I want to change password now but how will I do that?
View 3 Replies View Relatedi changed my password on router and can not open netgear
View 4 Replies View RelatedWhat is my dsl router user name and password
View 3 Replies View Relatedi would ask the steps for setup a passowrd in wireless router d-link di-624
View 2 Replies View RelatedI forgot my password for a NETGEAR 77 router
View 2 Replies View RelatedI believed I've had set up the Admin password and security code for this router (DIR-615) when I first installed this router @ 2 years ago. But somehow security code seems didn't register. I want to reset the security passcode, but I forgot the Admin's password so I cannot get access to the Dlink router to set up. Is there anyway that I can reset new PW or retrieve it.
View 1 Replies View Relatedhow would i change my password on my netgear router
View 4 Replies View RelatedMy wireless network: 1 Computer with ADSL modem and wireless router; The modem is connected in WAN port of router; and the computer is connected in LAN port of router. 1 Notebook with wi-fi receptor. Why a need to change my default login and password in wireless router If:
1 - The connection is encrypted with WPA2-PSK and AES with a very strong password (25 characters including letters, numbers and symbols);
2 - The SSID broadcast is disabled;
3 - The router have a MAC filter for only the my home computers;
4 - I allocated the number exactly of IP numbers to my home computers;
5 - The router Firewall is enabled and all computer of my home network have a good Internet Security (Firewall + Antivirus + Antispyware + Antispam + Antiphishing etc).
Is strictly necessary the change of my router default login and password?
I have no idea what my username and password for linksys router are. I tried to connect to http://192.168.1.1/ using defult (admin, admin) or (blank, admin) but had no luck. How can I reset the username and pass for the router in order to get acces to the settings?
View 3 Replies View RelatedWhen I away from my network and I want to operate my laptop then I get a message to put in security key. When I put in my password. I get a message does not match.
View 4 Replies View RelatedHow do I find the WEP/WPA/Security Key/Password for my wireless router, I have forgotten.
View 3 Replies View Relatedi cant figure out the the user id & default password for buffalo router
View 4 Replies View RelatedI need to access my router's (Cisco E3000) configuration utility, but of course, that requires entering a username and password, which I guess that I must have used something even unusual to me, because now it won't accept anything that I can think of. How do I discard the current username and password, and create new ones?
View 5 Replies View RelatedSo, i've been hosting games for a while but i don't know what happened, after i try to port forward router ports they just won't open :O. Yeh, as i go to Open Port Check Tool it says ''Error: I could not see your service on 62.**.***.*** on port (*****)Reason: Connection timed out''?
View 2 Replies View Relatedi cannot get to enter the router-login on windows or any other browser the user name and password window.
View 1 Replies View Related1x PC (Mine, and i'd like to the be the admin Win 7 Ultimate X64) with internet access via the router and connected to a NAS 2x PC's Win 7 32bit with internet access via the router and connected to a NAS 1x NAS to be shared by all 3 PC's 1x NAS 1x 4 port router
In simple terms the 2x Win 7 32bit PC's are for my children hence why I would like admin control of the computers. They will need a connection to the internet and share the same NAS. The Win 7 Ult X64 computer will also be connected to the NAS as well as the router for internet access.
All PC's and NAS to be connected with cable as opposed to wireless. whether this would be easy to set up? What cable would I need between the NAS and the PC's?
Untill yesterday my homegroup was working just fine. Two laptops / home premium / windows 7.Now when I try to access it I am prompted for a Network user name and password, the same promt giving details of my domain. This is not my homegroup password, I know where and how to find / use it. I have renamed pc's tried setting up homegroup again etc etc. Incidently I cant change the share options on any of my folders now, they are all locked to 'Nobody'.Can anyone help as it appears to have support from Microsoft for their product I'll have to pay pardon my igronance but if I sold a product with constant updates I wont charge for the support.
View 9 Replies View RelatedI've always thought of networking as one of the black arts.
4 PCs - One Vista, 2 Windows 7 Home Premium, 1 Windows 7 Ultimate. All see each other. All have appropriate folders shared.
Try accessing A from B and I get "Enter Network Password (to connect to B)". I never set one up to start with, so why is it asking me for it. How do I access/change something I never set?
Try accessing B from A - I see the PC, and the folders I want but trying to access them results in "You do not have permissionto access folder names Contact your network administrator - who he? Obviously me but I don't know what the answer is!
Trying similar things with the other two PCs in the mix results in various permutations of the same problem.
I have tried all the various links suggested through Networking and Help, but most of the actions seem to be boxes to click to make the PCs try to sort themselves out. When it fails I can't find a manual way of trying to sort it out.
Any suitable tutorials that may help? Couldn't see any.