I have a simple question, I recently fresh installed Windows7 and was wondering if I should Install the new mobo drivers from the ASUS site (i have an ASUS P5Q Pro) or should I just keep the current microsoft drives for all the chipsets/lan/etc. The only Thing I installed was the Realtek sound driver. Would there be any advantages to install proper drivers? because right now my computer runs perfectly stable and smooth using the Windows7 ones.
i see a lot of drivers pack for win 7, is it neccessery to have a driver cd installed with win 7, or it's enough if i have the drivers for my hardware as win 7 compatible, so is there any need for that extra drivers package cds if i have the right installer drivers?
Can someone please explain how this works? like where does it put the files etc and can i install the latest NVIDIA drives through the load drivers option during windows 7 install?
I'm currently using Win 7 RC 32-bit on this comp, and am looking to move to 64-bit by the time RTM comes round.
My question is - everything except my scanner has 64-bit drivers. There is this program that included 64-bit compatibility with a large number of scanners, and mine is listed.
Is there anyway I could install a second Windows 7 on a third partition (of this same hard drive), and try the driver with that to check it works? As I understand it you can't test drivers etc. in a VM install.
Finally moving all the main workstations over to Windows 7. In a test run yesterday - I noticed that Windows 7 jumps ahead of me in a big way right after the main desktop appears.
In the Vista/XP days - I would actually get to install my drivers in my preferred installation order. In this install - especially for graphics - before I even got to install my preferred nVidia drivers - I see that Win 7 has already grabbed and installed 195.65 - presumably from Windows Update - which I do not want.
What's the trick (if any) at "first" desktop to get Windows 7 to hold it's horses and let me install what I want?
I've been searching for an our or so all over trying to find something that helps me with this problem, but nothing seems to be working. I have an HP dv6780se Pavillion Laptop.
I put a new hard drive in it to restore and the restore disks are working correctly. It will install windows vista, but then when it starts installing all the bloatware the computer restarts and says OS not found.
So, I figured I'd install windows 7 since I was planning on doing it anyway.
My problem now is that I'm wondering since restore disks only install vista and don't finish the other hp stuff that the drivers aren't getting installed for vista...hence when I try and do a clean install of Windows 7 it says no drivers found. Any idea what I can do to get my install going?
Ok, i built a "whitebox" for a friend at work and they wanted to windows 7 64bit. So, i built the machine and have been trying to figure out how to get it to recognize the HD for the past 4 hours... mainly thanks to Samsung for making impossible to find drivers on their website for the Spinpoint F1 HD102UJ 1TB hard drive and i am also having problems finding drivers from the Gigabyte website... Anyway, suggestions? I gone through all the suggestions about checking the BIOS for RAID settings, but there is only 1 drive in this machine.
Furthermore, after trying to find the drivers online for about 2 hours...i ended up reformatting the drive from the utility disk that samsung had on their website..
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
I just did a clean install on my laptop and I am wondering if there is a quick and easy service to hunt down the necessary drivers i need, versus browsing the toshiba website for hours. I do have access to the internet on the computer because I have the wlan adapter driver installed.
For work I am going to be reformatting all the laptops before resale. Now downloading all the updates is very frustrating, but I have been advised to use a piece of software called Macrium Reflect, which basically copies the complete hard drive, so you have a perfect back up.
So my plan is to make a fresh install of windows, update Windows fully, and them make an exact image of that hard drive. What I then plan to do, is install this copy onto all the laptops (Using the unique windows key), which basically saves me wasting hours per laptop updating.
My problem is, when you format a laptop, some drivers are already installed, where others are not. I do not know exactly what determines why some drivers are already installed and some are not, but anyway, if I took the complete image of the hard drive, of lets say a Toshiba laptop, then put all that data on to an Acer laptop for example, would I get conflict between already installed drivers?
By this, I would not install any manually downloaded drivers onto the Toshiba until after the image is taken, meaning the only drivers moved between laptops are the pre-installed ones
My Realtek sound drivers keep on uninstalling themselves. I will install the drivers and I will then reboot as I says too, I reboot and they are there, if I boot the computer down and boot it back up the same day they are fine, no problems. But the next day when I go to boot up the pc I have no sound what so ever, I noticed that I have a HDMI Audio Driver, I disabled this and the problem went away for a few days.
I have installed window 7 in my pc. I want to know that is there any way to install driver from manage automatically from internet without going any particular site for download the driver and install them in to pc
I installed my new graphicscard yesterday (XFX GeForce GTS 250) and when Windows 7 booted, it automatically started downloading drivers -without my approval- (probably my own fault for not having UAC on) before I even had time to mount the driver CD.
It turns out those drivers were most likely wrong, I still don't have OpenGL support and there is no settings program for the card. So... I have no idea of where to find my drivers and delete them so I can install the one from my CD. I've tried, I found my old drivers but I can't find the ones Windows installed. I can't even run the Setup.exe in the CD, it just loads and nothing happens. Yes, I have tried RAA. UAC is always down to zero.
Where can I find the drivers Windows 7 Home Premium Edition installed?
I connected my Casio LK-215 via USB. Widndows won't find drivers automatically so i tried to get ones from Casio but they aren't for 64 bit Windows. So i downloaded some M-Audio drivers and installed them but in device manager it shows red exclamation mark and when it's connected and i try to play after a while it just freezes.
After installing a Netgear WNDR4500 router, and not changing anything else (settings, sleep/wake, etc.) my W7HP computer will not stay off! I have gone into the settings (via computer management) for the mouse, keyboard, and networking card, and have unchecked the box that allows those devices to wake the computer. I had the computer set to turn off after 10 minutes of inactivity, but changed it to 60 because the constant restarting grew tiresome. Now, after a period of time, the monitor will turn off, but the tower remains on.
I have heard of viruses causing computer crashes and shutdowns, but I have never heard of one that prevents a computer from staying off. The only way I am able to have the computer not restart (about a minute) after shutting down is to uplug the power cord after the machine is off, otherwise it simply restarts on its' own.
I would like Windows to automatically download and install its updates when I walk away from my machine for more than 5 minutes. How can this be set up?
I am reinstalling Windows rather often, but would like to do this without creating a slipstream DVD. Windows update has this tendency to wait a couple of hours before telling you that it has found an update. Is there a way to launch the updater agent on startup and then restart the computer thus installing the updates and running the agent again? I must say that installing updates is a pain where the sun doesn't shine since you need to watch it in order to reboot and launch the updater 6-7 times on a fresh install.
I'm having some problems with my motherboard now with Windows 7. It's an Abit motherboard and I'm getting a warning for the action center which states: "Your power management system is missing a driver" and suggest the uGuru 3.1X.
Now is where things get annoying, Abit is shut down and their driver downloads are dead. Even if they were alive, there has not been made any utility for Windows 7 as it weren't out at the time they closed.
So I have a few questions I hope some of you can answer:
- Is it at all vitial to have this driver?
- Is it anywhere I can get one which work with Windows 7?
if none of the above
- Can I somehow force the action center to ignore this "problem"? I hate having unsolved problems poping up there
A little additional question, anyone else having stability problems with the most recent windows messenger client on Windows 7 64bit?
Does any one have a fix for a Canon D860 Image class multifunction copier/printer?
It is recognized as a USB connection, but Canon has no windows 7 64 bit driver for it. I also hear the printer is being discontinued even though the price is the same as I paid for 3 years ago. It is a great photocopier and printer. Well it used to be a good printer!
I have already tried windows updating and I have driver detective as well. Struck out on all fronts. I looked at someone else's thread and I sent Canon support yesterday. They have not responded although they acknowledged the E-mail. Yeah, I guess this old bird is being sent to the old age home.
64bit soundmax drivers for Win 7 Currant ASUS drivers NFG! I have an i7 1366 MB Asus PT6 Deluxe MB 3gig Quad. 7 says not available, Don,t take MS at thier word right?
This is the version 4 adapter. I've downloaded and installed the driver. It seems to finish the setup as it should and the computer recognizes the driver as installed. The device is listed under the "unspecified" section in the device manager and says it needs trouble shooting.
I have a new monitor, and also a new USB to RS 2343 converter cable that both came with a CD that apparently has Drivers for the devices on them.
They don't start automatically in auto-play to load, and my reading of the file labels in the CD makes no sense to me.
So, with the CD in the drive just sitting there, what do I do to actually get the PC to recognize the Drivers in the Folder(s), and load them in the appropriate places ?
Should I install Windows 7? If so, which build, and does it have any bootable ISOs? I would preferably like to install something that I won't have to replace with a newer build later, but I see that probably won't be possible unless we get an official update on the RTM soon.
How would one go about doing a network install of windows 7, the machine I'm on has no dvd, my usb stick is missing, and I don't wanna run an install from inside windows to a separate partition cause I don't the new install of windows 7 seeing "d:" as it's main directory.