Error On New Install Of Win7
Oct 24, 2009
It gets to starting windows. "second screen of install process" then I get the Blue Screen Of Death.
STOP: 0x0000001E (0xffffffffC0000005, 0xFFFFF8000BCE9E324, 0x0000000000000000, 0xFFFFFFFFFFFFFFFFF)
Or it just resets the computer. I have tried everyting. This is a new computer built by me with the first time an operating system has been put on it.
View 9 Replies
ADVERTISEMENT
Nov 8, 2009
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
View 1 Replies
View Related
Oct 23, 2009
Okay, so I downloaded my copy of Windows 7 from DigitalRiver from the 741 offer for students. It gives me the three files as usual, but when I click on the .exe, I get a command prompt saying "Program is too big to fit into memory" before quickly closing.
I didn't even get this expandedSetup file that people are talking about, so I can't make a .ISO out of it or anything. I am running Vista Home Premium 32-bit, attempting to upgrade to Windows 7 Home Preimium Upgrade 32-bit.
I've tried re-downloading it.
I've tried using a different computer.
I've tried increasing virtual memory.
I've tried running as administrator.
Nothing seems to work, and I'm beginning to think I'm the only one so far with this problem. I even asked my computer science professor, and he thought the lack of virtual memory was the culprit. I have 3GB of RAM, and was able to free up 2GB to no avail.
View 2 Replies
View Related
Aug 7, 2009
I made a MSI using Wise Installation Express (v7.3). It contains many dll's and OCX's. Tried both selfreg and without it. I am installing it on a Windows 7 RC image.
My error message during the install goes something like this "error 1904 Failed to register RichViewEditX.ocx". It also fails on csXImage.ocx. Both ocx's are components we bought for our aging VB6 app.
I tried using regsvr32, but the OS rejected it and said something about Kernel32.dll error. I checked for dependencies, but at least one ocx was dependency free. Thus it should work on that one, but it didn't.
The ocx's are orignally Delphi components which have been made as VB6 ActiveX's.
What can I do to correct this problem? The web has not the answers, as far as I have searched.
View 3 Replies
View Related
Dec 1, 2009
The MS W7 upgrade advisor says this machine (AMD dual Athlon 64bit, 5GB memory) can upgrade to W7.
The machine has two HDD, 250GB (with dual boot of Vista 64 Home and XP 32 Home),
and 500 GB previously accessed from these two OSes, but now with all files removed.
When I start the W7 64bit install to the 500GB drive I get the message
" Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
I have an ASUS mobo with Phoenix BIOS.
As the disk was previously working and the BIOS does not seem to have a controller option I'm note sure where to go next.
View 9 Replies
View Related
Jul 17, 2009
Should I install Windows 7? If so, which build, and does it have any bootable ISOs? I would preferably like to install something that I won't have to replace with a newer build later, but I see that probably won't be possible unless we get an official update on the RTM soon.
View 9 Replies
View Related
Jul 16, 2009
How would one go about doing a network install of windows 7, the machine I'm on has no dvd, my usb stick is missing, and I don't wanna run an install from inside windows to a separate partition cause I don't the new install of windows 7 seeing "d:" as it's main directory.
View 3 Replies
View Related
Oct 28, 2009
So, I have an interesting problem with installing Win 7 from XP. I'm doing a full install over the old XP drive.
I have an unusual hardware configuration. I have 2 HDD's, one is SATA, and the other is on a legacy IDE. The SATA drive is a WD Raptor which I use for the OS and the IDE is a slower, larger drive I use for storing data. Additionally, the IDE drive is the Slave on the IDE chain. In XP, this worked great, because the system would boot to the SATA drive and I could use both drives.
When I went to install 7, both drives appear in the list, but their letter names were reversed: the OS drive was listed as "D" and the data drive was listed as "C". I didn't think much of it until later. I installed on "D" which was the SATA drive. After install, I noticed that my IDE drive wasn't listed in file explorer.
So I opened the Disk Manager and found that both drives were listed, but only the install disk was active. However, the IDE drive was Disk 0, and the SATA drive was Disk 1 and labeled "C:". I activated the IDE drive and it became "E:" (the DVD-ROM was already "D:"). I attempted to reboot and got an error "BOOTMGR is missing". If I put in the Win 7 install DVD it will boot to the SATA drive.
I read some of the other threads here and attempted fixes using "bootrec.exe" to no avail. I finally decided to reinstall again on the SATA drive. Again, 7 listed the SATA drive as Disk 1/"C:", and the IDE drive as Disk 0/(no letter). This time, I didn't activate the IDE drive and tried to reboot. New message "No system disk...". Put in the Win 7 DVD and it boots to the SATA drive.
My current theory is that Windows 7 is getting confused about the drive ordering when creating the boot sector on the drives. I ran out of time last night, but I thought I would unplug the IDE drive and do a fresh install on the SATA drive, then plug in the IDE drive after things were booting normally.
I did check the BIOS settings, and the SATA drive is listed first in the boot order.
ASUS M2N-SLI Deluxe
AMD 4200+ CPU
OCZ 4GB RAM
(IDE) Hitachi 320GB
(SATA) WD Raptor 120GB
nVidia 7600GT
Can someone offer some advice on how to solve this so I don't need the Win 7 DVD in all the time?
View 7 Replies
View Related
Nov 11, 2009
Want to install Windows 7 on second drive....How?
I am currently on Vista which is on C: drive, and I want to install Windows 7 on F: drive.
How can I do that?
Also how will I select which Windows I want to log on to?
View 6 Replies
View Related
Nov 12, 2009
I am planning to buy windows 7 within 2 weeks. I am currently using windows xp.
My computer specs is
Processor : pentium-4 2.93 ghz
Ram : 632 ghz (512+128)
OS : WIN XP
Hard drive : 80gb
Screen res:1024x768
I partitioned my hard drive into 4 (c,d,e,f), C drive contains Windows Xp and each drive is with 7.5 gb stored.
I want to keep my xp as it is and i want to install windows 7 also.
Is is possible to partition my drive and use it for xp and windows 7, if so pleaseee help me or specify any perfect tutorial on the web.
View 5 Replies
View Related
Dec 17, 2009
I upgraded from vista ultimate to Windows 7 using Dell supplied upgrade disks. This was a mistake because either I had previous problems I did not know about or the upgrade injected some. Now I have a brand new retail Windows 7 Ultimate upgrade disk.
Any recommendation as to the method I should use to install it would be appreciated. If I do a normal upgrade over what I have now I am afraid I might have the same problems still there. I can't format the C: drive as it is the system drive. Any suggestions?
View 4 Replies
View Related
Mar 15, 2009
I have an older computer that is or was being used for Win XP Pro. I put a new hard drive that is partitioned with 25gb on the C drive with two other partitions of different sizes. I set the the hard drive as cable select (later tried as Master only)
Windows 7 in cable select saw all the partitions. When set to Master it only saw Partition 1 and the rest as unallocated which seems weird.
I have the boot order in Bios set as Floppy, CD Rom and then Hard Drive.
I have an external usb DVD reader for the install disc.
When i start the pc, then press to boot from CD, it sees the install disk and the install process starts. I get to the point to select where to install and I get this Notice:
"Windows can NOT be installed on to Disk 0 Partition 1"
I hit the more info button and get this notice:
"The computer hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the BIOS Menu."
It should boot to the hard drive the way I have it setup. At least it does for Win XP.
I was wondering if anyone has any suggestion as to how to get around this issue.
View 6 Replies
View Related
Nov 7, 2009
I want to install windows 7 ultimate on a second 32-bit computer. How to do it legally?
View 2 Replies
View Related
Dec 9, 2009
Getting the following "issue" and not sure how to proceed?
I went to intel and installed all the latest Windows 7 64bit drivers
I verified I have the latest bios from intel
I have the Intel DP35DP
I also am getting a PCI Simple Communication Controller that I can't find a driver for..I assume this is the old dell modem I have installed (Conexant RS56/SP-PCI - R6793-17)
Address a problem with Intel Active Management Technology
Your version of Intel Active Management Technology isn't compatible with this version of Windows.
Go online to the following article for more information about possible solutions to this problem:
Click to go online to the Microsoft website for the KB article
Which version of Windows am I using?
You are using Windows 7.
Computers that use Intel vPro technology may have devices that are unrecognized in the Windows 7 Device Manager.
View 1 Replies
View Related
Nov 10, 2009
I installed Windows 7 64bit onto RAID 0+1 and XP on separate SATA drive. However, I now realise I re-formatted XP drive "out of sequence" in so much as I didn't follow the correct procedure to alter the boot sequence prior to re-format.
I can no longer boot into Windows 7, see following
The bios recognises the RAID setup - apologies for the poor quality.
I have tried running the startup & repair via install DVD, several times, but I keep getting the messsage that setup & repair did not detect any problems.
View 6 Replies
View Related
Apr 9, 2009
I´am using Windows 7 X64 b7057 primary on C: (second partition D: for data). I tried to intall Vista 64bit for dualboot, but after GUI of installing Vista finished and FIRST restarted an error black screen appeared after dual b.
selection, when I select Vista:
failed to start
windowssystem32winload.exe
status: 0xc000000d
And nothing helped /tried to repair from Vista DVD/.
I installed Vista to a partition created on the same HDD as Windows 7 as a "logical"
(it shows Windows 7) with 33GB free space /I think it should be enough/.
So the intaller of Vista didn´t finished installing Vista. Any idea how to fix it?
I read some articles about EasyBCD,etc but I´am not shure if my problem can be fixed with there utils. Can I install WinVista to a "logical" partiotion? /win 7 is on "primary"/
View 9 Replies
View Related
May 19, 2009
When I try to activate my installation of Windows 7 I'm getting error 0x8004FE33. Internet access is provided to me via proxy server (I'm part of a large campus network). Can anyone tell me how to fix this?
View 6 Replies
View Related
Sep 29, 2009
I have a HP m7667c, which has two SATA drives. The motherboard is ASUS P5BW-LA (or Basswood-UL8E). I've never successfully installed vista before because of it kept asking for SATA drive. I wonder if there is a solution for this problem with Window 7?
I think I have RAID on in the BIOS configuration but I don't really want to turn it off because in that way my old WinXP would die. I just wanted to give Windows 7 a try before I completely change to it. Could anyone help me? I could provide more information about the desktop if necessary.
View 0 Replies
View Related
Nov 9, 2009
i see a lot of drivers pack for win 7, is it neccessery to have a driver cd installed with win 7, or it's enough if i have the drivers for my hardware as win 7 compatible, so is there any need for that extra drivers package cds if i have the right installer drivers?
View 7 Replies
View Related
Nov 19, 2009
Ok so I got an MSDN membership for my birthday (Thanks Dad ) and I'm now downloading Windows 7 Ultimate 64bit.
I wanna know if the drivers are automatically found or if I need to download them and put them on a flash drive first.
View 3 Replies
View Related
Dec 26, 2009
Can someone please explain how this works? like where does it put the files etc and can i install the latest NVIDIA drives through the load drivers option during windows 7 install?
View 1 Replies
View Related
Jun 27, 2009
I'm currently using Win 7 RC 32-bit on this comp, and am looking to move to 64-bit by the time RTM comes round.
My question is - everything except my scanner has 64-bit drivers. There is this program that included 64-bit compatibility with a large number of scanners, and mine is listed.
Is there anyway I could install a second Windows 7 on a third partition (of this same hard drive), and try the driver with that to check it works? As I understand it you can't test drivers etc. in a VM install.
View 9 Replies
View Related
Oct 12, 2009
This morning I attended a Windows 7 Launch developer presentation as part of the New Efficiency. We were given copies of Windows 7 Ultimate at the end of the presentation, however I was disappointed to find it was only 32-bit. It says so on the disc.
My question is, is there somewhere I can get a hold of a copy of Win 7 Ultimate 64 bit (say, a download site?), and install it with my CD key I was given? Also, am I right in assuming that my CD key will work for both 64 and 32 bit?
View 8 Replies
View Related
Sep 12, 2009
I'm currently running Vista Home Premium 32-bit.
I'm going to buy Windows 7 Home Premium 32-bit upgrade.
I want to do a clean install on a new hard drive I just bought.
I'm going to put the current Vista hard drive on SATA 1
The new hard drive for Win 7 will be on SATA 0
I can't figure out what procedure to use so Win 7 Upgrade sees the old activated Vista to activate Win 7.
In short, I want a clean install via Win 7 upgrade media on a seperate hard drive.
Can anyone help with this?
View 9 Replies
View Related
Dec 4, 2009
i have a Sony Vaio VGN-CS325J that comes with Windows Vista Home Premium x64,now i am going to install windows seven x64 on my laptop but i don't want to lose my vista as a matter of fact i want to have dual boot win vista & seven.
is it possible?
(my Vista is installed at Drive C and i have an empty Drive that is F with NTFS file system and 50GB space).
View 9 Replies
View Related
Feb 24, 2009
I want to encrypt my hard drive with TrueCrypt, but it comes up with an error saying that "Windows is not installed on the drive from which it boots". I just reinstalled Windows 7, so it wouldn't be a huge loss to install it again in the same day, but when I install it, how do I make Windows install on the boot drive? When it came up with the partition prompt, I formatted the partitions (there were two) and then deleted the partitions and made it all unallocated space. Should I put one partition on first?
View 6 Replies
View Related
Dec 26, 2009
So I was not sure about Windows 7 and I have a PC with 2 physically separate internal hard drives. So I retained my vista OS on my C:/ drive (named OS) and did a clean install of windows 7 (using an upgrade disc student edition) on my D:/ drive (DATA).
After setting up, using and liking windows 7, I want to eliminate my vista system, which is boated now, completely. However, apparently with an intel chipset, I can't simply format the OS drive using the disc management utility, even though when I boot windows 7, it is renamed the D:/ drive because the bootloader is on the OS drive. I have tried changing the DATA drive to an active, bootable drive in disc manager. Unfortunately, I can't seem to make it the primary partition.
Originally found this forum on google with a hit on help: cannot reformat c drive
useful information, but I am not completely sure what it means.
After spending about a week customizing my Windows 7 install, I am not too happy about the possibility having to reinstall on the OS drive and go from there. What method should I use to format my OS drive, and still be able to boot the DATA drive. I would then like to use my OS drive for storing music, and pictures, etc.
I have an external HD to work with. I suppose I could image the DATA drive with the Windows 7 install, format the OS drive, and then restore the image to the C drive, but that still leaves the problem of how to format the OS drive in the first place. Also, I've never done a recovery from image before, and am not big on the prospect.
View 9 Replies
View Related
Jan 2, 2010
Finally moving all the main workstations over to Windows 7. In a test run yesterday - I noticed that Windows 7 jumps ahead of me in a big way right after the main desktop appears.
In the Vista/XP days - I would actually get to install my drivers in my preferred installation order. In this install - especially for graphics - before I even got to install my preferred nVidia drivers - I see that Win 7 has already grabbed and installed 195.65 - presumably from Windows Update - which I do not want.
What's the trick (if any) at "first" desktop to get Windows 7 to hold it's horses and let me install what I want?
View 9 Replies
View Related
May 3, 2009
I had device driver problems when installing Windows7 RC7100 from DVD so I setup a bootable USB drive. Follow these instructions.
Plug the drive into your PC.Open a command prompt as administrator. Get the drive number by typing:
diskpart
list disk
On my machine the USB disk was number 1. Format the drive by typing:
select disk 1
clean
create partition primary
select partition 1
active
format fs=NTFS
assign
exit Then copy Windows7 files from ISO to your USB drive.
Remember to setup your bios to boot from a USB drive.
I also setup multiple boot for XP, Vista & Windows 7 - no problems.
View 1 Replies
View Related
Jun 4, 2009
i cant update win 7 build 7100, i keep getting this error 80072F8F. ive tried restoring my advanced settings and nothing happened, i did a few searches on here with avail so can someone help me plz.
View 4 Replies
View Related
Aug 19, 2009
I have 3 hdd's.
1 x 160GB (SATA)
- Partition: ~149GB - Win Vista64
1 x 300GB (SATA)
- Partition: ~220GB - MISC
- Partition: ~58.5GB - Windows 7 64
1x 1TB (SATA)
- Partition: ~931GB - Games
I ended up taking my 300GB drive, created a logical partition, then booted into the Windows 7 dvd I have. (win 7 - 7100?, straight off ms)
Firstly, it takes about a couple minutes just to load the files. Then once it finally gets to the splash* screen and the cursor appears.....it takes about 5-10minutes for the "install" window to appear which seems VERY odd since my machine is VERY fast. It takes quite a bit of time to accomplish installing from loading to finished (40minutes maybe)...
After everything installs when I go to choose the Windows 7 option on the boot menu, I get this black SOD
Windowssystem32winloader.exe error 0xc000000D
Something about the file being missing or corrupt.
I took my Windows 7 disk, and entered command prompt through recovery tools (which takes at least 5 minutes due to loading time to get to each time).
I ran DISKPART, then did LIST VOL, so it would tell me the partitions and letters.
Then I took another window, and entered bcdedit. The letters matched up with the partition letters and the file DOES exist.
I've tried 3 different sources on 3 different DVD's to see if perhaps I had a bad image (1 x microsoft/2 x torrent), but that's not the case.
I've tried setting the path's again through bcdedit to make sure there was no data corruption in the settings, and that was not successful either...
So when I need to figure is out why it tells me the file "winloader.exe" is missing or corrupt, when in fact it is pointing to the right harddrive, on the right partition, on the right location.
Yes, they all show up on the BIOS post, yes it recognizes the 300GB drive in the setup without extra drivers. The only hdd it needs extra drivers for to see is my 1TB, but I'm not using that for the Windows 7 installation.
View 7 Replies
View Related