I made a MSI using Wise Installation Express (v7.3). It contains many dll's and OCX's. Tried both selfreg and without it. I am installing it on a Windows 7 RC image.
My error message during the install goes something like this "error 1904 Failed to register RichViewEditX.ocx". It also fails on csXImage.ocx. Both ocx's are components we bought for our aging VB6 app.
I tried using regsvr32, but the OS rejected it and said something about Kernel32.dll error. I checked for dependencies, but at least one ocx was dependency free. Thus it should work on that one, but it didn't.
The ocx's are orignally Delphi components which have been made as VB6 ActiveX's.
What can I do to correct this problem? The web has not the answers, as far as I have searched.
I am having great difficulty downloading and installing AVG 2012. Keeps on saying goodbye before installing and i am getting message that says MSI engine failed to install. Can't download. have tried 2 system restore points but still same.
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
The MS W7 upgrade advisor says this machine (AMD dual Athlon 64bit, 5GB memory) can upgrade to W7.
The machine has two HDD, 250GB (with dual boot of Vista 64 Home and XP 32 Home),
and 500 GB previously accessed from these two OSes, but now with all files removed.
When I start the W7 64bit install to the 500GB drive I get the message
" Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
I have an ASUS mobo with Phoenix BIOS.
As the disk was previously working and the BIOS does not seem to have a controller option I'm note sure where to go next.
Getting the following "issue" and not sure how to proceed?
I went to intel and installed all the latest Windows 7 64bit drivers
I verified I have the latest bios from intel
I have the Intel DP35DP
I also am getting a PCI Simple Communication Controller that I can't find a driver for..I assume this is the old dell modem I have installed (Conexant RS56/SP-PCI - R6793-17) Address a problem with Intel Active Management Technology
Your version of Intel Active Management Technology isn't compatible with this version of Windows.
Go online to the following article for more information about possible solutions to this problem:
Click to go online to the Microsoft website for the KB article
Which version of Windows am I using? You are using Windows 7.
Computers that use Intel vPro technology may have devices that are unrecognized in the Windows 7 Device Manager.
Okay, so I downloaded my copy of Windows 7 from DigitalRiver from the 741 offer for students. It gives me the three files as usual, but when I click on the .exe, I get a command prompt saying "Program is too big to fit into memory" before quickly closing.
I didn't even get this expandedSetup file that people are talking about, so I can't make a .ISO out of it or anything. I am running Vista Home Premium 32-bit, attempting to upgrade to Windows 7 Home Preimium Upgrade 32-bit.
I've tried re-downloading it.
I've tried using a different computer.
I've tried increasing virtual memory.
I've tried running as administrator.
Nothing seems to work, and I'm beginning to think I'm the only one so far with this problem. I even asked my computer science professor, and he thought the lack of virtual memory was the culprit. I have 3GB of RAM, and was able to free up 2GB to no avail.
I installed Windows 7 64bit onto RAID 0+1 and XP on separate SATA drive. However, I now realise I re-formatted XP drive "out of sequence" in so much as I didn't follow the correct procedure to alter the boot sequence prior to re-format.
I can no longer boot into Windows 7, see following
The bios recognises the RAID setup - apologies for the poor quality.
I have tried running the startup & repair via install DVD, several times, but I keep getting the messsage that setup & repair did not detect any problems.
I´am using Windows 7 X64 b7057 primary on C: (second partition D: for data). I tried to intall Vista 64bit for dualboot, but after GUI of installing Vista finished and FIRST restarted an error black screen appeared after dual b.
selection, when I select Vista:
failed to start
windowssystem32winload.exe
status: 0xc000000d
And nothing helped /tried to repair from Vista DVD/.
I installed Vista to a partition created on the same HDD as Windows 7 as a "logical"
(it shows Windows 7) with 33GB free space /I think it should be enough/.
So the intaller of Vista didn´t finished installing Vista. Any idea how to fix it?
I read some articles about EasyBCD,etc but I´am not shure if my problem can be fixed with there utils. Can I install WinVista to a "logical" partiotion? /win 7 is on "primary"/
When I try to activate my installation of Windows 7 I'm getting error 0x8004FE33. Internet access is provided to me via proxy server (I'm part of a large campus network). Can anyone tell me how to fix this?
i cant update win 7 build 7100, i keep getting this error 80072F8F. ive tried restoring my advanced settings and nothing happened, i did a few searches on here with avail so can someone help me plz.
1 x 160GB (SATA) - Partition: ~149GB - Win Vista64
1 x 300GB (SATA) - Partition: ~220GB - MISC - Partition: ~58.5GB - Windows 7 64
1x 1TB (SATA) - Partition: ~931GB - Games
I ended up taking my 300GB drive, created a logical partition, then booted into the Windows 7 dvd I have. (win 7 - 7100?, straight off ms)
Firstly, it takes about a couple minutes just to load the files. Then once it finally gets to the splash* screen and the cursor appears.....it takes about 5-10minutes for the "install" window to appear which seems VERY odd since my machine is VERY fast. It takes quite a bit of time to accomplish installing from loading to finished (40minutes maybe)...
After everything installs when I go to choose the Windows 7 option on the boot menu, I get this black SOD Windowssystem32winloader.exe error 0xc000000D Something about the file being missing or corrupt.
I took my Windows 7 disk, and entered command prompt through recovery tools (which takes at least 5 minutes due to loading time to get to each time). I ran DISKPART, then did LIST VOL, so it would tell me the partitions and letters. Then I took another window, and entered bcdedit. The letters matched up with the partition letters and the file DOES exist.
I've tried 3 different sources on 3 different DVD's to see if perhaps I had a bad image (1 x microsoft/2 x torrent), but that's not the case. I've tried setting the path's again through bcdedit to make sure there was no data corruption in the settings, and that was not successful either...
So when I need to figure is out why it tells me the file "winloader.exe" is missing or corrupt, when in fact it is pointing to the right harddrive, on the right partition, on the right location.
Yes, they all show up on the BIOS post, yes it recognizes the 300GB drive in the setup without extra drivers. The only hdd it needs extra drivers for to see is my 1TB, but I'm not using that for the Windows 7 installation.
I'm trying to 'Create a system repair disc' but keep getting this error message: System repair disc could not be created. The request is not supported (0x80070032). This is trying to use my CDRW.
If I try to use my DVDRW the error message I get is same but with a Unspecified error (0x8004005).
I've googled and tried ms support but can't find a solution. Any help would be appreciated...TIA
upgrade my system from Windows XP Pro SP3. The setup starts and gets past creating a user account, setting a computer name etc and then restarts and looks like Windows 7 is going to startup and then I get a BLUE SCREEN OF DEATH with:
STOP: C000021a [Fatal System Error}
The intial session process or system process terminated unexpectedly with a status of 0x00000000 (0xC0000001 0x00100400)
It then mentions about dumping the memory out to disk and reboots. If i press F8 and attempt to boot SAFE MODE I get a requester saying that setup cannot be completed in Safe Mode. If try the startup recovery the first time it says it fixed a problem and wants to restart again but it has fixed nothing. Next time the startup recovery just runs and doesn't appear to finish.
I have run the Windows Memeory Diagnostic within the setup and memory checks out fine. I initially thought the onboad audio chipset was the issue and disabled that but it made no difference. I did get one successful installation but it eventually crashed and burned with the same error after approximately 12 hours.
I purchased the Win 7 Pro Upgrade 32bit via digitalriver, but I've been doing some reseach and probably should have selected the 64bit version.
- Any ideas how I can get the 64bit version?
- For those who ordered the 32bit back-up disc kit for the extra $15 and have received it, does it come with both 32bit & 64bit?
- I've already installed and activated the 32bit version, but when I go to install the 64bit version, will I need to / is there a way to deactivate my initial 32bit install or will this not matter?
I'm having trouble installing windows 7 from my flash drive onto my netbook that runs winxp.
Where I used UNetbootin on my Vaio (Vista) laptop computer to burn an iso image to my flash drive. I then booted up my netbook, entered BIOS, changing the USB booting priority to the USB. However, I then get the error bessage "Error BOOTMGR is missing ctr alt del" .
I'm currently running 32-bit Windows 7 (Professional, full version) on my laptop, and want to use this machine to create a bootable USB drive with 64-bit Windows 7 (also Professional, full version). I tried going through the steps that are available on various tutorials online, but I'm always tripped up while attempting to use bootsect to make the drive bootable; basically I get an error saying that I need to be using a 64-bit OS.
I don't have convenient access to a computer with 64-bit Windows Vista/7 (I work at an academic institution where all pubic computers have XP or Linux), so I'm wondering if there's any way to get around this and create a bootable USB for 64-bit Windows 7 via a 32-bit OS.
I am looking for any Windows 7 Theme that includes changing the looks of any window that exemplifies the architectural look of a Mac: sharp edges, and boxy buttons, and colored scroll bars. It doesn't have to be necessarily the Mac theme, but anything around that look is acceptable.
I am fine with tweaking the explorer.exe, and some system32 files.
Any suggestions, comments and questions are always welcome.
P.S. I just got tired of the round look of any window.
I own a USB Drive ... Dane-Elec 16GB . I have a big problem with the USB on Windows 7 .
This USB have a password protect system and he need to create a virtual floppy drive so i can open the password program in order to get access to the USB .
My problem is that Windows 7 can`t install the virtual floppy drive . I have Windows Vista Ultimate SP1 as my second OS and the USB works perfect . Same on Windows XP . The only problem is here on Windows 7 . I used Windows updates to get the drivers but still not working .
By the way , if i run W. Vista and disable the password protection then in Windows 7 i can see my USB drive but i need the protection for my USB so if anyone know how to solve it please tell me .
[EDIT] Forgot to mention that i have the latest drivers for the USB even if i make the update from Device Manager i get the next message :
"Windows has determined the driver software for your device is up to date. USB FloppyDisk Drive"
Have an weird issue with Win 7 in the sense of Widescreen support.
I have an 22inch screen and run my games at the native rez of 1680 X 1050
Now the thing is older games like Project Snowblind and NFS:Most Wanted for example doesent support Widescreen as such, obviously. But in XP it seems to stretch the image and run fullscreen without any black edges on screen.
Where as in Win 7 it runs like in unstreched with Black Edges cause of the rez.
In XP even though not in Widescreen res , NFS for example I run 1280 X 1024 it runs full screen stretched, but in Win 7 it runs with the same rez and settings. But doesen't stretch image to rez.
Anyone else experience the same problem or know of a solution. I didin't do anything strange in XP, or change any settings or tweak GFX card drivers.
I tried running in XP Compatibility mode with Win 7, still the same.
I recently installed Windows 7 RC to my laptop and am facing a problem now. Sometimes when I plug in an USB Hard-drive or a ZEN MP3 player, the system does a full lock-up.
I had 7 Beta on the laptop earlier and it had no problems whatsoever. Anyone else experienced/solved similar problems or should I just go try and reinstall?
1st. Can I upgrade (clean install) from either XP or Vista 32 bit system to Windows 7 64?
2nd. If the answer to 1st is yes... If the Win 7 64 bit gives too much trouble, will I be able to reinstall and go with Win 7 32 bit.
I believe the future is going to be 64 but I've never used the 64 bit and really don't know what to expect or how smooth the transition will be. Any thoughts or advice???
I downloaded Windows 7 x64 and x86. i was in dubai last week and installed the x86 on my parents PC. works like a breeze and the installation couldnt have gone smoother.
I come back to melbourne and try the install on my PC and whether I run it through my current win7beta OS or whether i boot drom cd, both thr x64 and x86 give me error 0x80070241 around the 15% installation mark. after many attempts, i thought that i was perhaps because when doing a clean install, Windows 7 doesnt let you do a full format but only a quick format.
so i got a friends PC and did a full format. x84 installed upto 50% and gave me error 0x80070570.
I've read a lot of threads about Windows 7 servers not being able to see XP servers, but didn't see a lot of clear resolution to the issue.
Just got a new notebook with Win 7 Pro (32 bit). I cannot get it to see our office file server by name (633D). However, it can see it fine by IP address (192.168.0.103).
