Install Xp And Win7 On One Drive
Nov 12, 2009
I am planning to buy windows 7 within 2 weeks. I am currently using windows xp.
My computer specs is
Processor : pentium-4 2.93 ghz
Ram : 632 ghz (512+128)
OS : WIN XP
Hard drive : 80gb
Screen res:1024x768
I partitioned my hard drive into 4 (c,d,e,f), C drive contains Windows Xp and each drive is with 7.5 gb stored.
I want to keep my xp as it is and i want to install windows 7 also.
Is is possible to partition my drive and use it for xp and windows 7, if so pleaseee help me or specify any perfect tutorial on the web.
View 5 Replies
ADVERTISEMENT
Nov 11, 2009
Want to install Windows 7 on second drive....How?
I am currently on Vista which is on C: drive, and I want to install Windows 7 on F: drive.
How can I do that?
Also how will I select which Windows I want to log on to?
View 6 Replies
View Related
Sep 29, 2009
I have a HP m7667c, which has two SATA drives. The motherboard is ASUS P5BW-LA (or Basswood-UL8E). I've never successfully installed vista before because of it kept asking for SATA drive. I wonder if there is a solution for this problem with Window 7?
I think I have RAID on in the BIOS configuration but I don't really want to turn it off because in that way my old WinXP would die. I just wanted to give Windows 7 a try before I completely change to it. Could anyone help me? I could provide more information about the desktop if necessary.
View 0 Replies
View Related
Feb 24, 2009
I want to encrypt my hard drive with TrueCrypt, but it comes up with an error saying that "Windows is not installed on the drive from which it boots". I just reinstalled Windows 7, so it wouldn't be a huge loss to install it again in the same day, but when I install it, how do I make Windows install on the boot drive? When it came up with the partition prompt, I formatted the partitions (there were two) and then deleted the partitions and made it all unallocated space. Should I put one partition on first?
View 6 Replies
View Related
Dec 26, 2009
So I was not sure about Windows 7 and I have a PC with 2 physically separate internal hard drives. So I retained my vista OS on my C:/ drive (named OS) and did a clean install of windows 7 (using an upgrade disc student edition) on my D:/ drive (DATA).
After setting up, using and liking windows 7, I want to eliminate my vista system, which is boated now, completely. However, apparently with an intel chipset, I can't simply format the OS drive using the disc management utility, even though when I boot windows 7, it is renamed the D:/ drive because the bootloader is on the OS drive. I have tried changing the DATA drive to an active, bootable drive in disc manager. Unfortunately, I can't seem to make it the primary partition.
Originally found this forum on google with a hit on help: cannot reformat c drive
useful information, but I am not completely sure what it means.
After spending about a week customizing my Windows 7 install, I am not too happy about the possibility having to reinstall on the OS drive and go from there. What method should I use to format my OS drive, and still be able to boot the DATA drive. I would then like to use my OS drive for storing music, and pictures, etc.
I have an external HD to work with. I suppose I could image the DATA drive with the Windows 7 install, format the OS drive, and then restore the image to the C drive, but that still leaves the problem of how to format the OS drive in the first place. Also, I've never done a recovery from image before, and am not big on the prospect.
View 9 Replies
View Related
Jul 30, 2009
I'm in IT (surprise surprise) and I have extra hard drives coming out my ears. I want to move my Win RC x64 install to a larger hard drive.
Whats the easiest way to do this? I know its possible, I used to ghost XP machines at the local highschool (dont fret, they were all licensed).
I'm toying with the concept of making a fresh install, and doing something to the effect of a system restore to it, or something like that.
On a slightly less related note, my system is more powerful a machine than i ever expected to own two years ago. Its a core i7 machine with 12gb of ram and Windows 7 installed on a raptor. Why doesn't a fresh install of Windows 7 simply fly? Sure, multitasking can be done almost infinitely (lol), but there's literally no speed increase in app startup times, opening "my computer" or the device manager. None of it works as quickly or smoothly as i would have thought.
Also, again, where can i find a simple list of changes between RC and RTM?
View 7 Replies
View Related
Nov 8, 2009
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
View 1 Replies
View Related
Aug 30, 2009
I am planning on upgrading from XP to Windows 7 Professional fairly soon. I know that it performs a clean install and that I need to back up my C drive.
My question is in regards to my secondary hardrive. Will the clean install also wipe the second hardrive or will it leave it untouched? Basically, can I back up my C drive onto the secondary drive without fear of losing it all? I would assume it would leave the second drive alone but I couldn't find any info and thus, why I am here asking.
View 4 Replies
View Related
Oct 22, 2009
I'm trying to share the C Drive of a Windows 7 PC (The name of that PC is LINKS). I set full permissions for the 'Everyone' group. When, from another Windows 7 PC, I click on 'Network', I can see LINKS and I can see the C Drive on LINKS. But when I try to open that C Drive, a message pops up saying I do not have permission (see picture).
How can I access that C Drive on LINKS?
View 9 Replies
View Related
Aug 2, 2009
In all my years of tweaking now i still have never made a RAM drive(the fact that i never had enough spare RAM to do so) I have now had 8GB for awhile now and pretty much 4GB of it is never in use. I would like to make a RAM drive for firefox and try that out.
View 6 Replies
View Related
Sep 19, 2009
I have 64-bit Windows 7 running on drive C.
w/ Readyboost enabled (if this matters)
Is it possible / feasible to move my pagefile to my 32-bit (D) drive?
I googled but couldn't find an answer.
View 4 Replies
View Related
Jan 4, 2010
My current hard drive has been getting wonky on me. About a month ago it came up with bad sectors. Replaced them with backup sectors. Nothing bad has happen since then, and I scan almost every day just in case. I am considering buying a new 1TB just because it will be newer, and faster. This disk is getting a lot of read/write errors and takes a while to do some stuff now.
My question is, does anyone know if it is possible to transfer your windows 7 partitions to a new drive directly without using a 3rd drive as a medium. The hard drive I am using is 750gb, and as I said, I am getting a 1TB. So does anyone know an easy way I can just plug in the new drive, use software to copy over Windows 7 to the new drive and it still work?
I know Windows 7 installed 2 partitions, so that is what is confusing me. Because I can not even see the other partition it uses.
PS: I have all my files backed up on 2 other drives. So don't worry about that.
View 4 Replies
View Related
Jul 17, 2009
Should I install Windows 7? If so, which build, and does it have any bootable ISOs? I would preferably like to install something that I won't have to replace with a newer build later, but I see that probably won't be possible unless we get an official update on the RTM soon.
View 9 Replies
View Related
Jul 16, 2009
How would one go about doing a network install of windows 7, the machine I'm on has no dvd, my usb stick is missing, and I don't wanna run an install from inside windows to a separate partition cause I don't the new install of windows 7 seeing "d:" as it's main directory.
View 3 Replies
View Related
Oct 24, 2009
It gets to starting windows. "second screen of install process" then I get the Blue Screen Of Death.
STOP: 0x0000001E (0xffffffffC0000005, 0xFFFFF8000BCE9E324, 0x0000000000000000, 0xFFFFFFFFFFFFFFFFF)
Or it just resets the computer. I have tried everyting. This is a new computer built by me with the first time an operating system has been put on it.
View 9 Replies
View Related
Oct 28, 2009
So, I have an interesting problem with installing Win 7 from XP. I'm doing a full install over the old XP drive.
I have an unusual hardware configuration. I have 2 HDD's, one is SATA, and the other is on a legacy IDE. The SATA drive is a WD Raptor which I use for the OS and the IDE is a slower, larger drive I use for storing data. Additionally, the IDE drive is the Slave on the IDE chain. In XP, this worked great, because the system would boot to the SATA drive and I could use both drives.
When I went to install 7, both drives appear in the list, but their letter names were reversed: the OS drive was listed as "D" and the data drive was listed as "C". I didn't think much of it until later. I installed on "D" which was the SATA drive. After install, I noticed that my IDE drive wasn't listed in file explorer.
So I opened the Disk Manager and found that both drives were listed, but only the install disk was active. However, the IDE drive was Disk 0, and the SATA drive was Disk 1 and labeled "C:". I activated the IDE drive and it became "E:" (the DVD-ROM was already "D:"). I attempted to reboot and got an error "BOOTMGR is missing". If I put in the Win 7 install DVD it will boot to the SATA drive.
I read some of the other threads here and attempted fixes using "bootrec.exe" to no avail. I finally decided to reinstall again on the SATA drive. Again, 7 listed the SATA drive as Disk 1/"C:", and the IDE drive as Disk 0/(no letter). This time, I didn't activate the IDE drive and tried to reboot. New message "No system disk...". Put in the Win 7 DVD and it boots to the SATA drive.
My current theory is that Windows 7 is getting confused about the drive ordering when creating the boot sector on the drives. I ran out of time last night, but I thought I would unplug the IDE drive and do a fresh install on the SATA drive, then plug in the IDE drive after things were booting normally.
I did check the BIOS settings, and the SATA drive is listed first in the boot order.
ASUS M2N-SLI Deluxe
AMD 4200+ CPU
OCZ 4GB RAM
(IDE) Hitachi 320GB
(SATA) WD Raptor 120GB
nVidia 7600GT
Can someone offer some advice on how to solve this so I don't need the Win 7 DVD in all the time?
View 7 Replies
View Related
Dec 17, 2009
I upgraded from vista ultimate to Windows 7 using Dell supplied upgrade disks. This was a mistake because either I had previous problems I did not know about or the upgrade injected some. Now I have a brand new retail Windows 7 Ultimate upgrade disk.
Any recommendation as to the method I should use to install it would be appreciated. If I do a normal upgrade over what I have now I am afraid I might have the same problems still there. I can't format the C: drive as it is the system drive. Any suggestions?
View 4 Replies
View Related
Mar 15, 2009
I have an older computer that is or was being used for Win XP Pro. I put a new hard drive that is partitioned with 25gb on the C drive with two other partitions of different sizes. I set the the hard drive as cable select (later tried as Master only)
Windows 7 in cable select saw all the partitions. When set to Master it only saw Partition 1 and the rest as unallocated which seems weird.
I have the boot order in Bios set as Floppy, CD Rom and then Hard Drive.
I have an external usb DVD reader for the install disc.
When i start the pc, then press to boot from CD, it sees the install disk and the install process starts. I get to the point to select where to install and I get this Notice:
"Windows can NOT be installed on to Disk 0 Partition 1"
I hit the more info button and get this notice:
"The computer hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the BIOS Menu."
It should boot to the hard drive the way I have it setup. At least it does for Win XP.
I was wondering if anyone has any suggestion as to how to get around this issue.
View 6 Replies
View Related
Nov 7, 2009
I want to install windows 7 ultimate on a second 32-bit computer. How to do it legally?
View 2 Replies
View Related
Oct 11, 2009
I know there have been some discussions on this but I found this thread which actually DOES work for getting an XP system to work from a USB.
(Not only the install but actually Booting and running).
Ngine.de - How to install and run a FULL Windows XP from a USB drive
In theory something like this *could* work for Windows 7 --- anybody had a go yet.
Note - instead of Disconnecting Hard drives as specified in the link just disable them in the Bios - it's quicker and easier.
I know MS says its not possible but people seem to be able to find a way to do amazing things with computers.
View 6 Replies
View Related
Oct 25, 2009
I have a 320 gb hardrive which is split into 2 partitions at the moment, C and D. Unfortunately, my C drive, which has Windows XP installed on it at the moment, is only 15gb. I know I need atleast 20GB for a Windows 7 64-bit installation.
As I don't have access to another drive or a large enough USB to back my files up in at the moment, I was wondering if I should just follow the guide here and install Windows 7 in my D drive instead. The thing I wanted to confirm was this:
I read in this thread that if I install Windows 7 on D drive, it'll read the drive it is installed on as C. Is that true? Because I was wondering if I could just install Windows 7 in D drive and then format C which has XP in it (but none of my data).
Then I could rename the blank drive to D. Is this scenario possible? To cut a long story short, I want to install Windows 7 on my PC, get rid of XP, but my C drive is only 15gb and my D drive has all my data (movies, pictures, documents etc) in it.
View 5 Replies
View Related
Nov 4, 2009
And tips on how to do that, and is it even possible? I wanna get Windows 7 on my girlfriends computer, and they are not yet selling family licenses in my country (!!), so I was hoping I could upgrade her Win Vista to Windows 7 without having to do a clean format.
View 2 Replies
View Related
Nov 5, 2009
i have xp at the moment and upgrading to Windows 7 64bit. but i don't have access to an external hard drive so i can store my data with windows easy transfer
i also have 2 hard drives with one completely empty and one with all my data.
is it possible to just unplug the one with all my data and install windows 7 normally on my empy one and then just replug it in? since i don't have an external would this be a good alternative or possible _at_ all?
View 1 Replies
View Related
Nov 25, 2009
I installed Win 7 on a partition on the same drive as XP.
1 - XP was on C: Win 7 installed to F:
2 - I have removed XP from C:.
3 - Repaired Win 7. Win 7 boots fine.
Now I want to move Win 7 to the beginning of the drive but unsure how - as Acronis doesn't allow me to clone to the same drive - even though its another partition.
Is there any way round this?
View 9 Replies
View Related
Dec 18, 2009
I am looking to use my 1TB seagate SATA II drive for my Windows 7 installation, and was wondering how I should go about partitioning it and how large each partition should be or what I sould put on each partition.
My system will be used for the following:
Computer Games that take up a lot of space (World In Conflict, Empire Total War, Battlefield 2, Call of Duty, etc.)
Music
Video files/ recordings (I have a Hauppauge tv card)
Some Photos
Basic apps like office
Data files
Which of the above items should I put on the OS partition, and which should get their own partitions? How large should the OS partition be compared to the other partitions? Seperate partition for games?
Having one giant drive might be nice to try, but then I would have no where to put my excess video files if I ever needed to reformat. The 1TB drive accomodates whatever video files I can't store on my 2 smaller drives and currently has 120 GB of video on it.
In addition to my 1TB drive, I also have 2 more internal drives, a 250GB Maxtor ATA which is filled with video files and a 200GB WD SATA that I use for my TV card and storing the recordings I make until I have a chance to edit them or move them to a differet drive.
I have a seperate 250GB external drive for backing up data files and music, so the backup issue is taken care of.
View 3 Replies
View Related
Dec 27, 2009
I have xp and windows 7 dual booting and all appears to be working well except 1 thing.
xp was already installed and I already had a free partition. I installed windows 7 onto the free partition. My problem is that windows 7 is on drive F and xp is on drive c. It does not matter which os is started, they always show as xp on C: and 7 on F:
Everything works but most programs like to install themselves on c drive.
When I have dual booted in the past which ever os was start was automatically renamed to C:.
Does anyone have any ideas on how to make it so that when I start XP it is on drive C (as it is now) and then when I start Windows 7 have it be on drive C.
View 8 Replies
View Related
Jan 2, 2010
I am using Windows 7 Home Premium N and XP Home on a dual-boot system but I want to move my Windows 7 partition from one drive to another but am not sure how to do it. Currently XP is on partition C: and Windows 7 on partition O: and essentially, what I want to do is to move partition O: to my main drive where space is already available for this to be done.
I have seven drives on my system amounting to 6.5Tb (2Tb on external drives) and currently Windows 7 is on a partition on one of the internal 1Tb drives. However, I would like to free up the space being used and place Windows 7 in a separate 50Gb partition at the end of my main drive (500Gb). Since I pre-partitioned the current Windows 7 partition before installation, I do not have the 'hidden' partition I've read so much about.
I have an old DOS version of Ghost on a boot CD and can readily back up the current Windows 7 partition ready for recovering to the prepared partition on my main drive. Once transferred I then want to delete the current Windows 7 partition. However, I know there is more to it than this! I am quite happy to reletter the partition to drive O: since I have software installed on the Windows 7 partition which is referred to in the registry.
All this I'm fairly confident about doing - but it is operations involving the boot manager that I am completely unsure of. How does the system know where the boot info is located? What points it to the right partition/drive? Does it refer to the drive and/or partition? Is there anything else I just may have overlooked? Finally, should I perhaps just leave it where it is until I'm ready to do a reinstall on the appropriate partition?
A lot of questions I'm afraid but I would appreciate some help as I'm fairly new to the question of dual-boot systems and boot management.
PS I have been looking for info on this in all sorts of places but have not so far found the answers to my questions. Sorry for any inconvenience if the info I'm looking for is already on this, or another, site. It's just that I've not found the info so far and any help being pointed in the right direction would be appreciated.
View 9 Replies
View Related
Feb 15, 2009
I have a simple xp 32 computer and would like to dual boot (from a partition) with windows 7. my problem seems to lie in whether i have enable my usb to be bootable as a dvd install of windows 7. it seems very complicated, and i am interested in figuring out whether it was possible to simply create the partition (with gpart) than in windows mount windows 7 and when it asks where it wants to be installed, I would than chose my new partition.
I don't know... (don't want to screw up)
I hope this makes sense...
I really would like to try widows 7, and any help would be very much appreciated .
View 23 Replies
View Related
Nov 9, 2009
i see a lot of drivers pack for win 7, is it neccessery to have a driver cd installed with win 7, or it's enough if i have the drivers for my hardware as win 7 compatible, so is there any need for that extra drivers package cds if i have the right installer drivers?
View 7 Replies
View Related
Nov 19, 2009
Ok so I got an MSDN membership for my birthday (Thanks Dad ) and I'm now downloading Windows 7 Ultimate 64bit.
I wanna know if the drivers are automatically found or if I need to download them and put them on a flash drive first.
View 3 Replies
View Related
Dec 26, 2009
Can someone please explain how this works? like where does it put the files etc and can i install the latest NVIDIA drives through the load drivers option during windows 7 install?
View 1 Replies
View Related
