I have a 320 gb hardrive which is split into 2 partitions at the moment, C and D. Unfortunately, my C drive, which has Windows XP installed on it at the moment, is only 15gb. I know I need atleast 20GB for a Windows 7 64-bit installation.
As I don't have access to another drive or a large enough USB to back my files up in at the moment, I was wondering if I should just follow the guide here and install Windows 7 in my D drive instead. The thing I wanted to confirm was this:
I read in this thread that if I install Windows 7 on D drive, it'll read the drive it is installed on as C. Is that true? Because I was wondering if I could just install Windows 7 in D drive and then format C which has XP in it (but none of my data).
Then I could rename the blank drive to D. Is this scenario possible? To cut a long story short, I want to install Windows 7 on my PC, get rid of XP, but my C drive is only 15gb and my D drive has all my data (movies, pictures, documents etc) in it.
I am looking to use my 1TB seagate SATA II drive for my Windows 7 installation, and was wondering how I should go about partitioning it and how large each partition should be or what I sould put on each partition.
My system will be used for the following:
Computer Games that take up a lot of space (World In Conflict, Empire Total War, Battlefield 2, Call of Duty, etc.)
Music
Video files/ recordings (I have a Hauppauge tv card)
Some Photos
Basic apps like office
Data files
Which of the above items should I put on the OS partition, and which should get their own partitions? How large should the OS partition be compared to the other partitions? Seperate partition for games?
Having one giant drive might be nice to try, but then I would have no where to put my excess video files if I ever needed to reformat. The 1TB drive accomodates whatever video files I can't store on my 2 smaller drives and currently has 120 GB of video on it.
In addition to my 1TB drive, I also have 2 more internal drives, a 250GB Maxtor ATA which is filled with video files and a 200GB WD SATA that I use for my TV card and storing the recordings I make until I have a chance to edit them or move them to a differet drive.
I have a seperate 250GB external drive for backing up data files and music, so the backup issue is taken care of.
I am very lost, I have a IBM ThinkPad T42 with an older 20Gig hard drive that is blank, no OS on it, nothing at all. I tried to perform a custom clean install of Windows 7 and get to the part where you can format the drive or install drivers. When I select to install the drivers it can never find any.
What am I doing wrong? I know a little but I guess not enough, do I need to install fro somewhere else? and what drivers is it looking for?
I wanted to try Windows 7 Home Basic edition. So I modified build 7201 iso and started installing it into a vhd. After the first restart during installation process it gave me a BSOD. It is telling me that the drive containing the vhd file does`nt have enough space so that the vhd could expand. But i already have enough space left in that drive that is more than 11Gb while windows 7 takes only 8Gb to install.
I downloaded "dotnetfx35" from the Microsoft web site on my Windows 7 64 bit PC. When I double clicked on this file, it said it was extracting files, but I did not see any window popping up to show that the .NET framework is being installed. Now, I see a Microsoft.NET folder in the Programs in the Programs (x86) folder on my C drive.
However, I do not see MIcrosoft .NET Framework 3.5 SP1 in the Start>Programs menu or in the Add/REmove Programs list in the Control panel. Am I missing something? How can I verify that .net framework has in fact been successfully installed?
When Windows7 ships, I will be installing it on my laptop (Dell Latitude D631). This machine currently has Win XP Pro installed on a SATA HDD of 120Gb capacity.
My plan is to remove this disk & put it to one side, and install Windows 7 64bit on a brand new SATA HDD. I have bought a 500Gb WD drive and ideally plan to create 2 partitions - one for Windows, one for my data.
My questions are:
1. Any upfront advice on pitfalls of this approach?
2. Any knowledge (I can't specifically find any data on this, having trawled all sorts of places) of any drive capacity limitation for my Dell laptop - I have heard of 120 or 137 or other Gigabyte sizes as a limit so am now a little concerned that my lovely new 500Gb drive may not be fully usable.
If there's any inherent limitation, what's the way around this? Or will the BIOS 'autodetect' and see all 500Gb or is there something I need to do in BIOS or elsewhere to ensure the whole drive is visible and usable?
3. Finally...can I use the Windows 7 install process to create the 2 or even 3 partitions successfully?
I'm trying to install Windows 7 32bit on one of my drives via Vista, I click install on the DVD and click the drive. It does the first stage of installing and expanding files (whatever that is!). Then it restarts.. upon restart it boots onto Windows Setup and I get the logo which glows for a while then freezes.
I've looked this up and i've removed ram so I just have 1stick of 1gig and i've unplugged various USB items except my keyboard and mouse and still get the issue.
i just bought this new computer and every part of it seems to work like it should (atleast so i belive) and everything is starting nicely and everything is found in bios.
however when i try to install windows 7 x64 and when i come to the part where i have to choose which driver to install my windows 7 on, it cant find any driver.
I have been working on this for about 5 hours now, searching many forums, downloading drivers, changing Bios settings, etc... but nothing is working. I realize there is a compatibility issue with KV8 and Win7 but a guy at Asus said it might be able to be fixed with certain drivers. I have been fooling around with VIA and Fasttrak 378.
My hard drive is working fine as I am using it right now, but when I get to the Win7 installation to choose where to save it, it does not detect a hard drive. This happened when I tried to install XP pro 64 a while ago as well. How can I make it appear? My system is:
ABS built Asus K8V SE Deluxe AMD Athlon 64 3000+ 2gb G.Skill Ram 160gb Maxtor SATA hd
I guess I'm confused as to why my hard drive is even RAID configured being that there is only 1.
Since I made the Move to 64-bit a while back, Every once in a while, I would run into a Problem where I needed to Install Driver that was Un-Signed.
As A Security measure in the 64-bit Versions of Vista/7, All Drivers must come with a Secure Digital Signature.
This is not a large problem anymore with the fact that Most Drivers are Signed nowadays. But Older Hardware Drivers tend not to be Signed.
There is a Simple way around this Block.
Open the Command Prompt in Admin Mode (Type "CMD" into the Start Menu and press "Ctrl+Shift+Enter") Enter this Command: bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS Now when you Re-Boot, You should be able to Install those Pesky Un-Signed Drivers.
I use a Linksys WUSB600N wireless adapter and I'm having a problem with it. Every time my adapter is detected, Windows 7 installs its own drivers which are terrible. I can't even install the drivers I want! I have searched everywhere but haven't any luck for solutions. I've even tried installing my drivers over Windows', but that doesn't work well. I have Windows set to "Never install driver software from Windows Update" but it still does.
The setup.exe for my drivers requires the adapter to be plugged in to finish installation, but I can't do that with Windows' drivers inevitably going to install first. Nor can I manually install drivers with the Device Manager if it also requires the adapter to be plugged in. I'm guessing the DriverStore is causing Windows to auto-install these faulty drivers?
I did a partition, i ran the XP setup, chose the partition, started install, then it copied the files, then it had to restart, it restarted.. but its not moving for the next setup screen, it just jams on the load, "Press any key to boot from CD ... "
It is been there like over 30 minutes now, maybe someone can help me with this problem, thank you in advance.
PS. I restarted it also and then booted it again, and it seems it did not copy those files.. the partition was still empty.
PPS. And as it seems.. it does not run not at all now, i took out the XP cd and it does not load Windows 7 Also.
I haven't posted on here for a while because I've been taking a break from my computer and playing LOTRO which was causing me occasional bsod's which were really getting me down. I took a break from LOTRO for around 6 months and not once did I get a bsod on my computer despite my husband and son playing other games on my computer.I've recently come back to LOTRO since the new update of migrating to the US servers to see how it would run on my computer and to see if the bsod's returned. They did and the new update hasn't changed a thing. Each time I get the bsod my graphics card is named as the cause of the culprit.I have a Dual GPU and I found that AMD says this. Quote.For The Ultimate Visual Experience, be sure to select ATI CrossFireX ready motherboards for AMD and Intel processors and multiple ATI Radeon HD graphics cards. Now I've done a search and it looks like my motherboard - Gigabyte GA-770T-USB3 -isn't Crossfire ready.Before I take the plunge and buy a crossfire ready motherboard, would having a Dual GPU cause problems if my motherboard isn't crossfire ready? Or would it not make a difference as I've only got the one card? I've downloaded the profiles for the ATI drivers for Crossfire/dual GPU's but I haven't installed it yet, as I'm not sure whether because my motherboard isn't Crossfire ready it's going to cause further conflict and even more problems when I'm playing LOTRO.I didn't realize that when I got the graphics card that it was a dual GPU
I know that I can use SFC in an active mode SFC /scannow where it will replace files in an effort to correct problems BUT I would like to just have it run an integrity check instead without it taking actions.
My desktop connects to my router via a netgear N300 wiress USB adaptor. Also connected to my router is my media server PC which has a shared network drive.On bootup My desktop looks for the mapped network drive before it loads the USB. So it always shows the network drive as being unavailable. This is soon sorted by double clicking on the network drive icon. Is there a workround so that the PC looks for the network drive after loading the USB network has been established?
I have a PC that has windows 7 ultimate installed by a friend with a disk that legally allows multiple installations.Unfortunately my operating system isnt working well. it wont install a service pack or printers etc and I would like to do a fresh install from scratch. My friend tells me if I use his disk it will use up another of his product keys . however I am wondering is there any way I can re-install it with the existing product key so as not to use up another windows installation from his batch of licence keys
Have the UEFI Option in the boot menu of the ASUS K42F notebook. Regrettably, boot to USB is not an apparent option. Have emailed Asus support and the reply demonstrated no knowledge of the feature. There is an option that allows the entry of "command line" entries. The setup utilities are from American Megatrends (AMI).
I have a Server connected to a fixed IP on local LAN say 192.168.0.7 Now I just want to use some client software REMOTELY (outside the LAN) which simply requires me to type in IP address + user / password. Now if my Router reports my current IP address as www.xxx.yyy.zzz is THAT the address I should use and do I need to port forward anything -- The application is Vsphere NOT RDP as RDP needs me to connect to a WINDOWS machine (Real or VM inside tha LAN).On the server I can access ANY of the running VM's from the Vpshere client.I've actually "Poodlefaked" it so I can get my INTERNET IP address by starting the No-IP program from within any of the VMs at start up. This should allow mw to retrieve the current Internet IP address.(No-IP - Dynamic DNS, Static DNS for Your Dynamic IP)The No-IP works fine for me --there are others you can use for similar functions when you have dynamic IP's.
set up my parents brand new PC running Win 7 64 bit. Basically everything is fine except for 2 things which may be connected?1)Even though I connect to the internet no problem the little blue circle continues to spin in the taskbar as if it's trying to connect.2)I installed the latest version of firefox and that shows a banner along the top of the screen constantly saying something along the lines of updates are being downloaded.I have asimilair setup at home and have not come across this before.I've also installed AVG,Ccleaner and Comodo firewall.
I am planning on upgrading from XP to Windows 7 Professional fairly soon. I know that it performs a clean install and that I need to back up my C drive.
My question is in regards to my secondary hardrive. Will the clean install also wipe the second hardrive or will it leave it untouched? Basically, can I back up my C drive onto the secondary drive without fear of losing it all? I would assume it would leave the second drive alone but I couldn't find any info and thus, why I am here asking.
I'm trying to share the C Drive of a Windows 7 PC (The name of that PC is LINKS). I set full permissions for the 'Everyone' group. When, from another Windows 7 PC, I click on 'Network', I can see LINKS and I can see the C Drive on LINKS. But when I try to open that C Drive, a message pops up saying I do not have permission (see picture).
In all my years of tweaking now i still have never made a RAM drive(the fact that i never had enough spare RAM to do so) I have now had 8GB for awhile now and pretty much 4GB of it is never in use. I would like to make a RAM drive for firefox and try that out.
My current hard drive has been getting wonky on me. About a month ago it came up with bad sectors. Replaced them with backup sectors. Nothing bad has happen since then, and I scan almost every day just in case. I am considering buying a new 1TB just because it will be newer, and faster. This disk is getting a lot of read/write errors and takes a while to do some stuff now.
My question is, does anyone know if it is possible to transfer your windows 7 partitions to a new drive directly without using a 3rd drive as a medium. The hard drive I am using is 750gb, and as I said, I am getting a 1TB. So does anyone know an easy way I can just plug in the new drive, use software to copy over Windows 7 to the new drive and it still work?
I know Windows 7 installed 2 partitions, so that is what is confusing me. Because I can not even see the other partition it uses.
PS: I have all my files backed up on 2 other drives. So don't worry about that.
I have a HP m7667c, which has two SATA drives. The motherboard is ASUS P5BW-LA (or Basswood-UL8E). I've never successfully installed vista before because of it kept asking for SATA drive. I wonder if there is a solution for this problem with Window 7?
I think I have RAID on in the BIOS configuration but I don't really want to turn it off because in that way my old WinXP would die. I just wanted to give Windows 7 a try before I completely change to it. Could anyone help me? I could provide more information about the desktop if necessary.
And tips on how to do that, and is it even possible? I wanna get Windows 7 on my girlfriends computer, and they are not yet selling family licenses in my country (!!), so I was hoping I could upgrade her Win Vista to Windows 7 without having to do a clean format.
i have xp at the moment and upgrading to Windows 7 64bit. but i don't have access to an external hard drive so i can store my data with windows easy transfer
i also have 2 hard drives with one completely empty and one with all my data.
is it possible to just unplug the one with all my data and install windows 7 normally on my empy one and then just replug it in? since i don't have an external would this be a good alternative or possible _at_ all?