I have been working on this for about 5 hours now, searching many forums, downloading drivers, changing Bios settings, etc... but nothing is working. I realize there is a compatibility issue with KV8 and Win7 but a guy at Asus said it might be able to be fixed with certain drivers. I have been fooling around with VIA and Fasttrak 378.
My hard drive is working fine as I am using it right now, but when I get to the Win7 installation to choose where to save it, it does not detect a hard drive. This happened when I tried to install XP pro 64 a while ago as well. How can I make it appear? My system is:
ABS built
Asus K8V SE Deluxe
AMD Athlon 64 3000+
2gb G.Skill Ram
160gb Maxtor SATA hd
I guess I'm confused as to why my hard drive is even RAID configured being that there is only 1.
Thought I'd share a little bit of info I picked up while settings up Seven on my new rig.
Found that the driver CD that comes with the motherboard doesn't work off the bat. Auto-play doesn't like Seven for whatever reason, so what I ended up doing was browsing the CD and running the setup executable in compatibility mode for Vista, worked like a charm. Called ASUS to find out if they had any beta Seven drivers and turns out they more than likely will not be releasing anything until after Seven goes RTM. The only issue I still have is a list of System Interrupt Controllers as unknown devices in device manager. Aside from that, everything works great so far!
Has anyone had any joy installing Windows 7 Ultimate x86 onto a ASUS A8N-SLI Deluxe?
I have a RAID0 configured using the Silicon Raid chip. I've had this running under XP, XP64, Vista64 previously.
During the install I get to the prompt (the old F6 prompt) to load drivers, I have download some drivers from ASUS, Silicon and MS but none seem to work.
I don't think it is the RAID0 that is really an issue as I also have another disk connect to the Silicon chip, that is not configured for RAID but it fails to detect that drive as well.
I've followed a few threads on here and other websites, but I cannot seem to get around this.
I've tried:
Silicon Image - Support | Search Results Microsoft Update Catalog Some of these, but there are loads.
I would like to know if I can install windows 7 & a new solid state drive on this system. Curently have 2gb ddr 400 memory, Atholon 3800 wd 250gb ide hd
I can not install the Nvidia raid drivers and it gives me trouble with a USB hard discs. Probably no one has the solution on that matter.
"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"
The another thing is - when i look my "device manager" and go display adapters, it show Radeon drivers 1950 series(Microsoft WDDM). Do i have a ATI or Microsoft driver?
Earlier i install Ati ATI 9.1 driver for Vista 32b and i thing it is working ok - planning to install Ati 9.2 later.
I bought a PC with a ASUS P6T Deluxe motherboard a month or so ago and installed Windows 7 Ultimate to a SATA drive.When the machine boots up it goes through the process of initialising the onboard RAID controller then looking for drives to boot from RAID - of which there aren't any.Also in Device Manager I have a RAID controller showing under Other Devices as 'not installed'.Can I disable RAID in the BIOS to speed up booting as I don't need it at present (or do I???)?
I’ve just built a new pc, rough spec below. I’m not very knowledgeable (probably haven’t set it up correctly it’s a quad core its all rather intimidating coming from a 1.1ghz AGP machine prior) and I’m having difficulties, hoping to find answers here.
System spec:
OS: Currently XP I did install windows 7 32 bit, and went back to XP Mobo: Asus p6t deluxe v2 (the one without the sas controllers) CPU: Intel i7 920 Ram: Crucial ballistix 1333mhz
Not over clocked, all stock, on air with a heat sink.
1.I’m trying to install windows 7 64 bit (frustrating/border line tears), during installation, a driver that has no description is required from a media device, searching online and using ideas I’m still unable to install windows 7 64 bit, but I have had windows 7 32 bit installed, without a driver requirement issue.
2.In my bios I can read my lg ch08 super multi blu ray drivers description, but it doesn’t show up (the letter drive icon) in my computer, it opens closes and speeds up, and I can not find a driver online… it doesn’t appear to exist inside the os.
I haven’t flashed the bios, seems to deep a process but it may be required, I ran windows 7 upgrade advisor and it mentioned a miniport driver possible issue, I just really need guidance here, I’m trying to install Windows 7 home premium edition.
I have an Asus P5N32-SLI Deluxe Motherboard with 4 GB of memory, an ATI 4800 series Video, running the latest BIOS version 502. My primary HD is a Raptor 150DB and my secondary is a 400GB WD. My DVD is a Plextor PX-775A. They are all SATA.
This problem crosses both platforms; 32bit and 64bit, It also does not matter if I have upgraded or preformed a fresh install of Windows 7.
Note: This problem has been apparent in EVERY official release of Windows 7 and all leaks up though the last leak of 7264 (64 bit).
Note: This problem does NOT happen in Vista, either platforms (32 or 64 bit).
I have absolutely no problem installing Windows 7. It runs absolute smoothly after the install. The problem happens when transferring single large files. I get a BSOD after a few minutes into the transfer. This also happens when Acronis does a backup of the system.
I did buy and install a new Gigabyte motherboard and new memory. The problem went away, as I knew it would. However Windows 7 ran so much slower I RMA'ed the motherboard and memory.
I feel that it might be the chipset drivers? Which I have installed the Vista64 bit chipset driver, which seemed to cause the BSOD even faster.
The dump file was analyzed and I was told it was pointing to an nvida driver problem with my video?
I am trying to run windows 7 on my p5gd2 deluxe mb. Windows 7 will not recognize my optical drives. I was able to load it via USB and it ran fine but still did not show my optical drives. I have seen others on line say they are running windows 7 with this mb but I can't get my optical drives to show up. I contacted asus and they said the board my not be compatiable with windows 7 because of the age but how are others running it. I am currently running windows vista 32 bit with no problems.
i have 4 2gb Kingston HyperX memory at 800mhz on my P5b Deluxe. So 8gb in total.At first no problem, the motherboard recognize all 8gb with the Memory remap function 'on'The problem is that it recognizes it has PC-5300 and not PC-6400 (as it should cause they are)- So is there a way in the bios to make it that my motherboard recognize them has PC-6400 (800mhz) ? Other thing, Even though i am sure i bought exactly the same memory, in the sandra report, the 2 pairs are different.
Here is the Sandra report:
Processor Model : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz Speed : 3GHz Cores per Processor : 2 Unit(s) Type : Dual-Core Integrated Data Cache : 2x 32kB, Synchronous, Write-Thru, 8-way, 64 byte line size L2 Cache : 6MB, ECC, Synchronous, ATC, 24-way, 64 byte line size, 2 threads sharing
I just installed Windows 7 64-bit onto my gaming computer, as seen in my system specs. My main concern is, I have an Asus M2N32-SLI Deluxe motherboard, and I don't know if Windows updated the drivers for the chipset or the onboard audio.
I tried to download the chipset and audio drivers from Asus, using Vista 64-bit, but they would not install normally... When I tried to use the Asus Install, it would say I am not using the correct operating system. So, I went straight to the setup.exe file, and it "installed" the stuff, but nothing like how I have seen on either Vista or XP. I doubt the "install" did anything.
So what can I do? I'm thinking my chipset is what is causing my loss in FPS for my games... BTW, I am using build 7229.
I'm fairly new to Windows 7. Installed today, everything seems to work fine... except.. I can not find the WiFi drivers for the ASUS P5K Deluxe WiFi-AP mobo (ASUSTeK Computer Inc.).
Tried to run the setup on my old cd w/ Vista compability, but that didn't seem to work. Then I found some drivers here: ASUSTeK Computer Inc.-Support-
Does anyone here know where to find the wireless driver, or when it eventually might be released?
Some hardware will work with Microsoft drivers, but my AMD X2 5000+ processor doesn't register on CPU-Z at anything approaching 3.0 gb. even after altering settings in setup which when i ran xp 64 immediately resulted in processor speed change. what's up?
Updated to Win 7 2years ago (by a neighbor). Last week I tried to run the installationASUS CD and it came back with some kernel problem. I just wanted to reinstall some of the utilities, etc. that we're on the CD.
I install this windows 7 64bit many time,s on my asus x79 deluxe motherboard whit never any trouble today in put my windows 7 in my drive an reboot to install my windows 7 then this code 5 pop up saying can not boot from cd . I don't know what happen then i tried my windows 8 it booted right up but i don't like my windows 8 .
I have been having some trouble with Windows 7 and an ASUS A8V-Deluxe motherboard (K8T800). Windows 7 will not recognize that a network cable has been plugged in, even though the network cable and switch port tests ok on another PC. I've also tried a number of network cables CAT5e/CAT6.
Previous OS was Windows XP and everything worked fine.
System specs: Asus A8V-Deluxe (939) Athlon 3500 2GB DDR400 NVidia 6600GT 256MB 250GB IDE Hard drive LG DVD-RW (IDE)
Background: Started with a BIOS reset and a clean install and format of the hard drive every time
1. Installed Win7 x64 - Network Cable Unplugged 2. Installed Win7 x86 - Network Cable Unplugged 3. Installed Win7 x64 & added a known-to-be-working Intel Pro 100S NIC - Network Cable Unplugged on both NIC's 4. Installed Win7 x64 & added a known-to-be-working Intel Pro 100S NIC - Network Cable Unplugged on both NIC's 5. Disabled Onboard NIC and re-installed Win7 x64 - Network Cable Unplugged (Pro 100S) 6. Disabled Onboard NIC and re-installed Win7 x86 - Network Cable Unplugged (Pro 100S)
So it would appear that something else is causing the Network Cable Uplugged issue, it looks like something within Windows 7, rather than a physical problem with the NIC.
I have tried disabling IPv6, but that makes no difference.
I have tried a couple of BIOS versions, maybe if anyone out there has had any success with this MB and Windows 7 they could recommend a BIOS version?
