Running Win7 From A USB Stick / Drive
Oct 11, 2009
I know there have been some discussions on this but I found this thread which actually DOES work for getting an XP system to work from a USB.
(Not only the install but actually Booting and running).
Ngine.de - How to install and run a FULL Windows XP from a USB drive
In theory something like this *could* work for Windows 7 --- anybody had a go yet.
Note - instead of Disconnecting Hard drives as specified in the link just disable them in the Bios - it's quicker and easier.
I know MS says its not possible but people seem to be able to find a way to do amazing things with computers.
View 6 Replies
ADVERTISEMENT
Dec 12, 2009
2.4 GHz single core
1gb ram
256mb video memory
Advisor says not capable of Aero. Stationary computer.
Upgrade to Windows 7 or keep XP?
View 8 Replies
View Related
Apr 16, 2012
I have been getting BSODs for awhile now unfortunately. At first I thought it was my power supply not supplying enough power anymore because it's 2+ years old and has been through many builds.Well, I ran Memtest last night just to be sure, and after waking up 8 hours later, Memtest had reported over 450+ errors, this was with BOTH ram sticks inserted / being tested.My timings were set as they should be (9-9-9-24-2t command rate and 1.5v DRAM voltage).I'm currently testing 1 stick at a time to see if the errors pop up on one stick only. Now, in the BIOS, I have the timings set to 9-9-9-24-2t command rate, 1.5v DRAM voltage, but in Memtest it says: CAS: 6-6-6-20 / Single Channel (when testing one stick only)
View 2 Replies
View Related
Dec 11, 2009
I just upgraded to Windows 7 Ultimate from Vista. I have a decent computer, but after the upgrade everything has been running like its in slow motion. Every window that pops up pops up slow and when i exit out, it exits out slow. But the big problem i am having is that my games are running in slow motion even if i put all the settings as far down as they can go. I have updated my drivers for my motherboard, and video card and it hasn't improved one bit.
I also have cleared the registry using regcure and it still hasn't improved. All the same games that i played on Vista ran perfectly until i upgraded, and i clean installed the OS's twice now and i still have the same problem. Does anyone know how to fix this, or am i just going to have to stick with vista to run everything better?
Here is my computer:
ASUS P6T Deluxe V2 motherboard
GeForce GTX 260 Core 216 video card
CORSAIR XMS3 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3
Intel Core i7-920 processor
CORSAIR CMPSU-1000HX 1000W PSU
x2 Western Digital Caviar Black WD6401AALS 640GB 7200 RPM 32MB Cache SATA
XIGMATEK Intel Core i7 compatible Dark Knight heat sink
AZZA Solano 1000 Black Full tower Case
View 2 Replies
View Related
Jun 18, 2012
I use 3 USB sticks to backup data on a Win 7 machine
-Stick 1 does M,W,F
-Stick 2 does Tu + Th
-Stick 3 does Sun
I am having problems assigning them all to the same drive letter.I have tried assigning them individually in Disk Management to M: , which happens but as soon as the 2 of the sticks gets removed and put back in they go back to either H or G.I have looked at this thread and the registry fix didnt help either. Drive Letter - Add, Change, or Remove in Windows 7.I need all 3 sticks to be given the drive letter M and to keep it. (obv only 1 stick is in at a time.)
View 3 Replies
View Related
Jul 4, 2012
1. Is it possible to install Windows 7 ONTO external USB drives (160GB passport / 2TB ext. drive)? I guess not but I just want get it confirmed by experts here.
2. Is it possible to install Windows 7 (ONTO internal hard drive) FROM external USB drives (not USB sticks) like 160GB passport/ 2TB ext USB HDD? If yes, know the procedure to prepare one?
3. Is it possible to setup Windows 7 LIVE disk on USB stick?
4. Is it possible to setup Windows 7 LIVE disk on ext USB drive?
View 1 Replies
View Related
Aug 31, 2011
i have a laptop that i use a clear usb stick... i want to use it on my desk top computer which has a tower hard drive....
View 5 Replies
View Related
Apr 6, 2012
why does my shift key stick and caps lock stick
View 3 Replies
View Related
Feb 12, 2011
At some point the view/layout of my usb sticks has changed ie everything is in file type view...?How can I change it so that the contents appear altogether like c drive...?I have attached a screenshot of the unwanted layout.I have noticed that in my computer the usb stick shows as removable disk,however if I right click the usb stick and choose open as portable device, it then shows everything as normal...?
View 6 Replies
View Related
May 20, 2011
i have a memory stick with 32gb i can not remove or store anything i shows me write protected how can i remove that?
View 2 Replies
View Related
Dec 20, 2011
When trying to Create a Back Up System Image having correctly formatted the memory stick. I am confronted by, "the drive is not a valid backup location".
View 7 Replies
View Related
Aug 30, 2009
I am planning on upgrading from XP to Windows 7 Professional fairly soon. I know that it performs a clean install and that I need to back up my C drive.
My question is in regards to my secondary hardrive. Will the clean install also wipe the second hardrive or will it leave it untouched? Basically, can I back up my C drive onto the secondary drive without fear of losing it all? I would assume it would leave the second drive alone but I couldn't find any info and thus, why I am here asking.
View 4 Replies
View Related
Nov 11, 2009
Want to install Windows 7 on second drive....How?
I am currently on Vista which is on C: drive, and I want to install Windows 7 on F: drive.
How can I do that?
Also how will I select which Windows I want to log on to?
View 6 Replies
View Related
Nov 12, 2009
I am planning to buy windows 7 within 2 weeks. I am currently using windows xp.
My computer specs is
Processor : pentium-4 2.93 ghz
Ram : 632 ghz (512+128)
OS : WIN XP
Hard drive : 80gb
Screen res:1024x768
I partitioned my hard drive into 4 (c,d,e,f), C drive contains Windows Xp and each drive is with 7.5 gb stored.
I want to keep my xp as it is and i want to install windows 7 also.
Is is possible to partition my drive and use it for xp and windows 7, if so pleaseee help me or specify any perfect tutorial on the web.
View 5 Replies
View Related
Oct 22, 2009
I'm trying to share the C Drive of a Windows 7 PC (The name of that PC is LINKS). I set full permissions for the 'Everyone' group. When, from another Windows 7 PC, I click on 'Network', I can see LINKS and I can see the C Drive on LINKS. But when I try to open that C Drive, a message pops up saying I do not have permission (see picture).
How can I access that C Drive on LINKS?
View 9 Replies
View Related
Aug 2, 2009
In all my years of tweaking now i still have never made a RAM drive(the fact that i never had enough spare RAM to do so) I have now had 8GB for awhile now and pretty much 4GB of it is never in use. I would like to make a RAM drive for firefox and try that out.
View 6 Replies
View Related
Sep 19, 2009
I have 64-bit Windows 7 running on drive C.
w/ Readyboost enabled (if this matters)
Is it possible / feasible to move my pagefile to my 32-bit (D) drive?
I googled but couldn't find an answer.
View 4 Replies
View Related
Jan 4, 2010
My current hard drive has been getting wonky on me. About a month ago it came up with bad sectors. Replaced them with backup sectors. Nothing bad has happen since then, and I scan almost every day just in case. I am considering buying a new 1TB just because it will be newer, and faster. This disk is getting a lot of read/write errors and takes a while to do some stuff now.
My question is, does anyone know if it is possible to transfer your windows 7 partitions to a new drive directly without using a 3rd drive as a medium. The hard drive I am using is 750gb, and as I said, I am getting a 1TB. So does anyone know an easy way I can just plug in the new drive, use software to copy over Windows 7 to the new drive and it still work?
I know Windows 7 installed 2 partitions, so that is what is confusing me. Because I can not even see the other partition it uses.
PS: I have all my files backed up on 2 other drives. So don't worry about that.
View 4 Replies
View Related
Sep 29, 2009
I have a HP m7667c, which has two SATA drives. The motherboard is ASUS P5BW-LA (or Basswood-UL8E). I've never successfully installed vista before because of it kept asking for SATA drive. I wonder if there is a solution for this problem with Window 7?
I think I have RAID on in the BIOS configuration but I don't really want to turn it off because in that way my old WinXP would die. I just wanted to give Windows 7 a try before I completely change to it. Could anyone help me? I could provide more information about the desktop if necessary.
View 0 Replies
View Related
Oct 25, 2009
I have a 320 gb hardrive which is split into 2 partitions at the moment, C and D. Unfortunately, my C drive, which has Windows XP installed on it at the moment, is only 15gb. I know I need atleast 20GB for a Windows 7 64-bit installation.
As I don't have access to another drive or a large enough USB to back my files up in at the moment, I was wondering if I should just follow the guide here and install Windows 7 in my D drive instead. The thing I wanted to confirm was this:
I read in this thread that if I install Windows 7 on D drive, it'll read the drive it is installed on as C. Is that true? Because I was wondering if I could just install Windows 7 in D drive and then format C which has XP in it (but none of my data).
Then I could rename the blank drive to D. Is this scenario possible? To cut a long story short, I want to install Windows 7 on my PC, get rid of XP, but my C drive is only 15gb and my D drive has all my data (movies, pictures, documents etc) in it.
View 5 Replies
View Related
Nov 4, 2009
And tips on how to do that, and is it even possible? I wanna get Windows 7 on my girlfriends computer, and they are not yet selling family licenses in my country (!!), so I was hoping I could upgrade her Win Vista to Windows 7 without having to do a clean format.
View 2 Replies
View Related
Nov 5, 2009
i have xp at the moment and upgrading to Windows 7 64bit. but i don't have access to an external hard drive so i can store my data with windows easy transfer
i also have 2 hard drives with one completely empty and one with all my data.
is it possible to just unplug the one with all my data and install windows 7 normally on my empy one and then just replug it in? since i don't have an external would this be a good alternative or possible _at_ all?
View 1 Replies
View Related
Nov 25, 2009
I installed Win 7 on a partition on the same drive as XP.
1 - XP was on C: Win 7 installed to F:
2 - I have removed XP from C:.
3 - Repaired Win 7. Win 7 boots fine.
Now I want to move Win 7 to the beginning of the drive but unsure how - as Acronis doesn't allow me to clone to the same drive - even though its another partition.
Is there any way round this?
View 9 Replies
View Related
Feb 24, 2009
I want to encrypt my hard drive with TrueCrypt, but it comes up with an error saying that "Windows is not installed on the drive from which it boots". I just reinstalled Windows 7, so it wouldn't be a huge loss to install it again in the same day, but when I install it, how do I make Windows install on the boot drive? When it came up with the partition prompt, I formatted the partitions (there were two) and then deleted the partitions and made it all unallocated space. Should I put one partition on first?
View 6 Replies
View Related
Dec 18, 2009
I am looking to use my 1TB seagate SATA II drive for my Windows 7 installation, and was wondering how I should go about partitioning it and how large each partition should be or what I sould put on each partition.
My system will be used for the following:
Computer Games that take up a lot of space (World In Conflict, Empire Total War, Battlefield 2, Call of Duty, etc.)
Music
Video files/ recordings (I have a Hauppauge tv card)
Some Photos
Basic apps like office
Data files
Which of the above items should I put on the OS partition, and which should get their own partitions? How large should the OS partition be compared to the other partitions? Seperate partition for games?
Having one giant drive might be nice to try, but then I would have no where to put my excess video files if I ever needed to reformat. The 1TB drive accomodates whatever video files I can't store on my 2 smaller drives and currently has 120 GB of video on it.
In addition to my 1TB drive, I also have 2 more internal drives, a 250GB Maxtor ATA which is filled with video files and a 200GB WD SATA that I use for my TV card and storing the recordings I make until I have a chance to edit them or move them to a differet drive.
I have a seperate 250GB external drive for backing up data files and music, so the backup issue is taken care of.
View 3 Replies
View Related
Dec 26, 2009
So I was not sure about Windows 7 and I have a PC with 2 physically separate internal hard drives. So I retained my vista OS on my C:/ drive (named OS) and did a clean install of windows 7 (using an upgrade disc student edition) on my D:/ drive (DATA).
After setting up, using and liking windows 7, I want to eliminate my vista system, which is boated now, completely. However, apparently with an intel chipset, I can't simply format the OS drive using the disc management utility, even though when I boot windows 7, it is renamed the D:/ drive because the bootloader is on the OS drive. I have tried changing the DATA drive to an active, bootable drive in disc manager. Unfortunately, I can't seem to make it the primary partition.
Originally found this forum on google with a hit on help: cannot reformat c drive
useful information, but I am not completely sure what it means.
After spending about a week customizing my Windows 7 install, I am not too happy about the possibility having to reinstall on the OS drive and go from there. What method should I use to format my OS drive, and still be able to boot the DATA drive. I would then like to use my OS drive for storing music, and pictures, etc.
I have an external HD to work with. I suppose I could image the DATA drive with the Windows 7 install, format the OS drive, and then restore the image to the C drive, but that still leaves the problem of how to format the OS drive in the first place. Also, I've never done a recovery from image before, and am not big on the prospect.
View 9 Replies
View Related
Dec 27, 2009
I have xp and windows 7 dual booting and all appears to be working well except 1 thing.
xp was already installed and I already had a free partition. I installed windows 7 onto the free partition. My problem is that windows 7 is on drive F and xp is on drive c. It does not matter which os is started, they always show as xp on C: and 7 on F:
Everything works but most programs like to install themselves on c drive.
When I have dual booted in the past which ever os was start was automatically renamed to C:.
Does anyone have any ideas on how to make it so that when I start XP it is on drive C (as it is now) and then when I start Windows 7 have it be on drive C.
View 8 Replies
View Related
Jan 2, 2010
I am using Windows 7 Home Premium N and XP Home on a dual-boot system but I want to move my Windows 7 partition from one drive to another but am not sure how to do it. Currently XP is on partition C: and Windows 7 on partition O: and essentially, what I want to do is to move partition O: to my main drive where space is already available for this to be done.
I have seven drives on my system amounting to 6.5Tb (2Tb on external drives) and currently Windows 7 is on a partition on one of the internal 1Tb drives. However, I would like to free up the space being used and place Windows 7 in a separate 50Gb partition at the end of my main drive (500Gb). Since I pre-partitioned the current Windows 7 partition before installation, I do not have the 'hidden' partition I've read so much about.
I have an old DOS version of Ghost on a boot CD and can readily back up the current Windows 7 partition ready for recovering to the prepared partition on my main drive. Once transferred I then want to delete the current Windows 7 partition. However, I know there is more to it than this! I am quite happy to reletter the partition to drive O: since I have software installed on the Windows 7 partition which is referred to in the registry.
All this I'm fairly confident about doing - but it is operations involving the boot manager that I am completely unsure of. How does the system know where the boot info is located? What points it to the right partition/drive? Does it refer to the drive and/or partition? Is there anything else I just may have overlooked? Finally, should I perhaps just leave it where it is until I'm ready to do a reinstall on the appropriate partition?
A lot of questions I'm afraid but I would appreciate some help as I'm fairly new to the question of dual-boot systems and boot management.
PS I have been looking for info on this in all sorts of places but have not so far found the answers to my questions. Sorry for any inconvenience if the info I'm looking for is already on this, or another, site. It's just that I've not found the info so far and any help being pointed in the right direction would be appreciated.
View 9 Replies
View Related
Feb 15, 2009
I have a simple xp 32 computer and would like to dual boot (from a partition) with windows 7. my problem seems to lie in whether i have enable my usb to be bootable as a dvd install of windows 7. it seems very complicated, and i am interested in figuring out whether it was possible to simply create the partition (with gpart) than in windows mount windows 7 and when it asks where it wants to be installed, I would than chose my new partition.
I don't know... (don't want to screw up)
I hope this makes sense...
I really would like to try widows 7, and any help would be very much appreciated .
View 23 Replies
View Related
Oct 25, 2009
I am looking for an alternate touchpad drive to install in my Dell Inspiron 1720 that is compatible for 32 bit Win 7. My warranty went up and Dell will not give me the compatible programs unless I pay.
I'm assuming there is a generic drive out there, somewhere, that does the trick. All I need is to increase the sensitivity, speed, and disable tap-click.
View 2 Replies
View Related
May 28, 2009
I got a question for you maybe you can answer for me. I have a single 1terabyte sata drive with windows 7 on it. I used to have Windows xp pro on it but i upload Windows 7, i just delete the "old windows" that Windows 7 left me. Now i have accumulated alot of files in my documents file which i use for video purposes which take up about 530 gigs.
i can't wipe my hard drive clean to install the new update rc which i recieved as a beta tester. Is there any way to partition the drive only where Windows 7 is at leaving my 530 gigs in a seperate partition so that i can install dual os's. The two os's will be Windows 7 rc and Xp Pro. the only reason i made the switch is because i built my new computer with 4 gigs of memory running core 7 processor but xp only sees 3 gigs.
View 8 Replies
View Related