Use Usb Clear Stick In Hard Drive Desktop?
Aug 31, 2011i have a laptop that i use a clear usb stick... i want to use it on my desk top computer which has a tower hard drive....
View 5 Repliesi have a laptop that i use a clear usb stick... i want to use it on my desk top computer which has a tower hard drive....
View 5 RepliesHow to Clear the Desktop with Aero Shake in Windows 7 ?
View 0 Replies View RelatedI just need your expert opinion on this matter before I call Dell back. Apparently my Hard drive went out on my new computer (6 mos.old) and, I guess a possible Motherboard problem as well, because the Dell tech told me they were sending a Hard drive & a motherboard to a service tech near me. Anyway, the tech came out with only the Hard drive. When I ask him where the Motherboard was, he didn't know anything about a motherboard.Dell did not send him one. He went ahead and installed the Hard drive & every thing seems to be working fine now for 4 days so far. My concern is, do you think my computer would still work ok if it has a faulty motherboard too? My warranty will be up in about 6 months & just want to make sure. I have a message to call Dell back & let them know how my service call went, but Just wanted your opinion before I do. Should I insist on a new motherboard?
View 6 Replies View RelatedI had Dell XPS 8300 Desktop & had bought & Installed Windows-7 ( Ultimate ) on it's 500 GB HDD.I gave that system to my relative except Hard Drive.Now I bought Dell T-7500 Workstation with only DOS installed on it's hard drive to save some money & because I already have Windows-7 ( Ultimate ) DVD.I took out the hard drive with DOS from the workstation & replaced it with the hard drive that I had in XPS with Win-7 already installed.I then tried to boot it in the workstation but it wouldn't boot & gave error messages.So I formatted the OS Partition & fresh installed Windows-7. Now it does load Windows -7 but first it goes thru some other commands as follows when I start the system.
Dell SAS 6 Host Bus Adapter BIOS
MPTBIOS 6.22.03.00 ( 2008.08.06 )
Initializing.....
Press Ctrl - C to run SAS Configuration Utility
Searching for Devices at HBA 0.....
Dell MPT Boot ROM Successfully installed
Then it loads Windows-7.All of above happens on its own, I didnt touch anything.So what is going on & what do I have to do get rid off those initializing commands ? I have never had this happen to any previously owned Dell systems.Also I haven't installed any drivers yet but Sound, Video & Internet does work.Do I need to install any drivers & if yes, which ones ?Here is the configuration of Dell workstation T-7500 :
Intel(R) Xeon(R) E5645 2.40GHz, 12M cache, 5.86 GT/s QPI, Turbo, HT, 6C
Intel(R) 5520 Chipset
DOS Factory Installed (English)
Integrated Intel(R) SATA 3.0Gb/s controller with support for RAID
Integrated High Definition Audio
[code]....
Got a new computer today, plugged in my old 500GB hard drive for back up storage. I went into it, can see everything fine, go through the program files, etc...Except I can't find my old documents, pictures, or anything that was saved on my desktop. A search won't even bring it up. How the heck can I get it back?
View 2 Replies View Relatedis there an easy way to reboot into a different operating system thats on a different harddrive from the desktop?
View 4 Replies View Relatedhow do i transfer from my dell laptops hard drive to desktop when monitor on lap top is dead
View 1 Replies View RelatedI'm looking at getting an external storage device to store my files on, and I can't decide what to get.Is there a massive difference between between an external hardrive, and a Desktop hard drive? These are the ones I can't decide from..Western Digital 1TB Elements External Hard Drive | Littlewoods.com..Is there much difference between the two? Which one would suit me better? I'm running a samsung rv510 laptop.
View 4 Replies View Relatedmy desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
View 2 Replies View Related[code] I keep getting the error message: "Running out of disk space on Lenovo D Drive" and I don"t know how to free up space. I had a large file: MediaID.bin on this drive, using a lot of space, tried deleting it, it went away but no space was freed up.
View 7 Replies View RelatedEquipment: Acer Aspire 5535 Laptop Originally running Vista Home Premium - no problem. I have updated to W7 and now on W7 Ultimate SP1 32 bit I can slot an DS card into the card reader and copy to/from with Explorer.
I then eject the device using Safely Remove Hardware and Eject Media icon in the rhs of the Task Bar.
I remove the card and then any other card slotted in is not recognised - including the original one. It does not appear in the Explorer window and is not accessible.
If I look on Device Manager, under Universal Bus Controllers, the eigth one down is USB Mass Storage Device and is showing an ! in yellow triangle. Right click on this brings up properties which tells me:
"Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer. (Code 47)
To fix this problem, unplug this device from your computer and then plug it in again." Well, if course I did remove the card but it don't see that
If I reboot the LT this is cleared. If I watch Device manager whilst ejecting the card, nothing happens till I actually, physically take out the card when it updates the window to show the fault triangle. I have checked for latest driver and am told it has the latest one. Other USB ports work OK.
How do you reset (clear) all current USB drive letter assignments? As a result of changing my external USB Hub controller from a CyberPower CP-H720P (USB 2.0 7-Port Hub w/Power Adapter) to a SIIG 06-0960A (USB 3.0 w/3-Ports & USB 2.0 w/3-Ports plus Card Reader w/Power Adapter), all of my original external USB drive letters were changed. The following are my Original and New USB external device drive letters: F changed to O � Port 7 Hub 3 � Patriot Memory (16GB USB 2.0 Memory) G changed to N � Port 2 Hub 4 � Desktop (Seagate USB 2.0) H changed to M � Port 1 Hub 4 � Free Agent Desktop (Seagate USB 2.0) I changed to K � Port 4 Hub 3 � MyBook 1130 (Western Digital USB 3.0) J changed to L � Port 3 Hub 3 � MyBook 1140 (Western Digital USB 3.0) I need to know what steps I must perform to clear (reset) my current USB drive letter assignments so that I can begin anew starting with the first available drive letter, drive letter �F�.
View 2 Replies View RelatedI love the Sticky Notes application. But it get's really annoying when I over over the Show Desktop button, I only see my gadgets! Sticky Notes gets hidden because Windows sees it as an application and not a gadget (which is right).
Anyway to add this functionality?
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedI use 3 USB sticks to backup data on a Win 7 machine
-Stick 1 does M,W,F
-Stick 2 does Tu + Th
-Stick 3 does Sun
I am having problems assigning them all to the same drive letter.I have tried assigning them individually in Disk Management to M: , which happens but as soon as the 2 of the sticks gets removed and put back in they go back to either H or G.I have looked at this thread and the registry fix didnt help either. Drive Letter - Add, Change, or Remove in Windows 7.I need all 3 sticks to be given the drive letter M and to keep it. (obv only 1 stick is in at a time.)
1. Is it possible to install Windows 7 ONTO external USB drives (160GB passport / 2TB ext. drive)? I guess not but I just want get it confirmed by experts here.
2. Is it possible to install Windows 7 (ONTO internal hard drive) FROM external USB drives (not USB sticks) like 160GB passport/ 2TB ext USB HDD? If yes, know the procedure to prepare one?
3. Is it possible to setup Windows 7 LIVE disk on USB stick?
4. Is it possible to setup Windows 7 LIVE disk on ext USB drive?
I know there have been some discussions on this but I found this thread which actually DOES work for getting an XP system to work from a USB.
(Not only the install but actually Booting and running).
Ngine.de - How to install and run a FULL Windows XP from a USB drive
In theory something like this *could* work for Windows 7 --- anybody had a go yet.
Note - instead of Disconnecting Hard drives as specified in the link just disable them in the Bios - it's quicker and easier.
I know MS says its not possible but people seem to be able to find a way to do amazing things with computers.
why does my shift key stick and caps lock stick
View 3 Replies View RelatedAt some point the view/layout of my usb sticks has changed ie everything is in file type view...?How can I change it so that the contents appear altogether like c drive...?I have attached a screenshot of the unwanted layout.I have noticed that in my computer the usb stick shows as removable disk,however if I right click the usb stick and choose open as portable device, it then shows everything as normal...?
View 6 Replies View Relatedi have a memory stick with 32gb i can not remove or store anything i shows me write protected how can i remove that?
View 2 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedWhen trying to Create a Back Up System Image having correctly formatted the memory stick. I am confronted by, "the drive is not a valid backup location".
View 7 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.