I'm trying to share the C Drive of a Windows 7 PC (The name of that PC is LINKS). I set full permissions for the 'Everyone' group. When, from another Windows 7 PC, I click on 'Network', I can see LINKS and I can see the C Drive on LINKS. But when I try to open that C Drive, a message pops up saying I do not have permission (see picture).
How can I access that C Drive on LINKS?
I'm a true novice with networking.
For the first time ever, I've put in a Router, and, amazingly, it sems to work.
Have 2 PC's in the same room.
Both are ethernet hard wired to router, as they are all pretty close together.
Old PC runs XP, and has my Printer connected to it via a USB cable.
New PC runs Windows 7
Question. Assuming both PC's are turned On, would love to be able to print from my new Windows 7 PC to the printer (connected to the XP machine)
Now that there is a router, am assuming that this is possible.
Could someone please tell me how to configure the XP machine settings to enable this ?
Same question as to how to configure the new Windows 7 PC to do this ?
Detail would be appreciated, as I'm really not too sharp with this stuff.
Having troubles setting this up.
Windows 7 computer working fine - printer working fine (it's a canon ip5200). On Windows XP machine (SP3), I am trying to access the printer. I've tried this a couple of ways and it fails every time.
1) Drill down to printer via the Add Printer searchj for a network printer action. This eventually will ask me to point to an INF file that I don't have (unpacking Canon's printer driver installer to get to the 'ip5200.inf' file will eventually get me a 'Invalid printer file' error even though I can see that the inf file looks like an inf file.
2) Try to add it as a local printer, pointing to the network path (etworkprinter). That installs OK, but it doesn't work.
3) Try to install a network printer giving it a network path. See #1.
What in the heck am I doing wrong? I cannot get Windows7 to add the Windows XP drivers to it's list so I can install it via the network.
I have 2 Laptops running under XP and 2 Laptops running under Win 7, I run the XP under workgroup with Mshome name and these 2 laptops can access files from each other, similar under Homegroup, the Win 7 laptops can see each other.
The XP laptops CANNOT see the laptops under win 7, and vice versa. I read the How-to Geek article a few times , I tried to change the name MShome under XP to Workgroup, even then the win 7 and xp cannot see each other. Even worse the XP laptops cannot access each other.
Any suggestions.
I have 5 computers networked. 3 are Win 7 and 2 are XP Pro SP3.
The printer is connected to an XP machine and can be seen by all computers.
They are all in the same workgroup.
The 2 XP computers can share the printer normally and as long as the machine with the printer is on I can print without problems.
The 3 Windows 7 machines cannot.
I have tried all tricks I found here. I added the printer to Windows 7 as a local printer and added a local port that points to the XP machine (//XPComputer/Printer). That didn't work either and it seems to be the way people get it to work between XP and Windows 7.
I tried adding a network printer and although it sees the printer in the printer list, it hangs adding the printer or after adding the printer I get error 0x0000000d or 0x00000716. I looked these up but couldn't find anything that helped me solve the problem.
There seems to be some sort of authentication issue between the XP machine and the Windows 7 ones.
One tidbit of information, the XP machines are both using NetBEUI. Not sure if that is causing the issue or not. Haven't tried to disable it.
Has anybody fixed anything similar??
I am running Win7x64 and a HP7350 Photosmart printer. To get the printer to work the Windows 7 driver is used for a Deskjet 5550. Works fine. I would like to use the printer on my Linksys network as it did when my desktop was an XP. The driver is only available through the Windows 7 OS, not as a download for Windows 7. the download for XP doesn't work. The driver is incompatible. Is there a way around this?
View 2 Replies View Relatedokay, so i have a 1TB external hard drive and i wanna share it between my Windows 7 ult desktop(the one its connected to,wired to router),another desktop (xp pro,wired connection as well),a Windows 7 ult laptop (wirelessly),and a xp pro laptop (again wireless)he complicated part is i wanna password protect at least part of it from the rest of my family so i can hide my
View 1 Replies View RelatedI really need to know how to enable drive security and sharing option in win7 64bit.
I don't seem to find it, i have switched from xp recently and in xp I used to right clicked any drive (C or D) and selected sharing and security.. then I could set permissions for different users whether to access the particular drive (Read/Write access) like which user could access which hard disk drive and it kept privacy intact for me.
Now I need this in win7 is there anyone that could point me to the right direction how to get this done in win7?
i can't share my hard drive on the network. it's already been shared using advance sharing with permission set to full control. can anyone help me?
View 2 Replies View RelatedI have recently purchased a USB Harddrive.
I wish to share a directory on it, but when I tried through the share menu, or by clicking on 'share this' in Windows Explorer, Windows 7 told me that 'This folder can't be shared'. When I tried the advanced sharing settings, I get an error telling me that 'there are no more endpoints available from an endpoint mapper'.
Other directories, on my internal HDD, are already shared fine, and a quick test confirmed that further shares from the C drive also work. I am on Win 7 Home Premium and connect to a router via ethernet cable.
Okay so i have established my DvD drive will not read this but another computer in my house will. I need help getting her {Vista home basic} to share it with my {Windows seven ultimate RC}. I have turned firewalls off and everything.
View 2 Replies View RelatedI have a 128GB SSD for booting and games and a 1tb hard drive for storage. Because my OS is on my boot drive, the location for my videos folder is on the boot drive and I don't want to store my movies on my boot drive because of space constraints. I'm using homegroup to stream movies to my mother's computer. Is there any way I can stream videos from a folder in my storage drive or any alternative method for changing the root destination of the videos folder in my C drive?
View 2 Replies View RelatedI have two external drives that I'd like to share. I have them mapped as an X: and Y: drive. I go into advanced sharing settings > permissions, and add Full Control for the group "Everyone". I hit apply and it looks fine and dandy. When I reboot my machine the sharing settings are lost.
When the computer initially starts up Auto Play opens for both drives. Not sure if this has anything to do with it though. how to get my sharing settings to stick for both externals?
I am running WHS but the same principal applies as 7. I have a HP N40L Server and have no problem sharing anything internal or external after it is connected following standard procedure.
My question is, is it possible to make Windows 7/WHS automatically share plug and play storage devices. The Server is over Wi-Fi and sometimes for big files it can be too slow and is easier just plugging in a HD.
Ideally
1. File is too big to rip directly to Desktop or Laptop from Server.
2. Plug in storage device to Server via any of the four USBs on the Servers front.
3. Go back to my regular Desktop or Laptop
4. Go to My Computer and notice the new drive has appeared under the Sever with my other internal shared drives
5. Drag and Drop to and from Server and Computer as I wish.
how the local drive mapping in Remote Desktop works. I use it because it's very convenient, but I'm concerned about the privacy of it, i.e. that other people might see this drive as well.
I need to be absolutely sure before I'm going to continue using a mapped drive.
I am planning on upgrading from XP to Windows 7 Professional fairly soon. I know that it performs a clean install and that I need to back up my C drive.
My question is in regards to my secondary hardrive. Will the clean install also wipe the second hardrive or will it leave it untouched? Basically, can I back up my C drive onto the secondary drive without fear of losing it all? I would assume it would leave the second drive alone but I couldn't find any info and thus, why I am here asking.
Want to install Windows 7 on second drive....How?
I am currently on Vista which is on C: drive, and I want to install Windows 7 on F: drive.
How can I do that?
Also how will I select which Windows I want to log on to?
I am planning to buy windows 7 within 2 weeks. I am currently using windows xp.
My computer specs is
Processor : pentium-4 2.93 ghz
Ram : 632 ghz (512+128)
OS : WIN XP
Hard drive : 80gb
Screen res:1024x768
I partitioned my hard drive into 4 (c,d,e,f), C drive contains Windows Xp and each drive is with 7.5 gb stored.
I want to keep my xp as it is and i want to install windows 7 also.
Is is possible to partition my drive and use it for xp and windows 7, if so pleaseee help me or specify any perfect tutorial on the web.
In all my years of tweaking now i still have never made a RAM drive(the fact that i never had enough spare RAM to do so) I have now had 8GB for awhile now and pretty much 4GB of it is never in use. I would like to make a RAM drive for firefox and try that out.
View 6 Replies View RelatedI have 64-bit Windows 7 running on drive C.
w/ Readyboost enabled (if this matters)
Is it possible / feasible to move my pagefile to my 32-bit (D) drive?
I googled but couldn't find an answer.
My current hard drive has been getting wonky on me. About a month ago it came up with bad sectors. Replaced them with backup sectors. Nothing bad has happen since then, and I scan almost every day just in case. I am considering buying a new 1TB just because it will be newer, and faster. This disk is getting a lot of read/write errors and takes a while to do some stuff now.
My question is, does anyone know if it is possible to transfer your windows 7 partitions to a new drive directly without using a 3rd drive as a medium. The hard drive I am using is 750gb, and as I said, I am getting a 1TB. So does anyone know an easy way I can just plug in the new drive, use software to copy over Windows 7 to the new drive and it still work?
I know Windows 7 installed 2 partitions, so that is what is confusing me. Because I can not even see the other partition it uses.
PS: I have all my files backed up on 2 other drives. So don't worry about that.
I have a HP m7667c, which has two SATA drives. The motherboard is ASUS P5BW-LA (or Basswood-UL8E). I've never successfully installed vista before because of it kept asking for SATA drive. I wonder if there is a solution for this problem with Window 7?
I think I have RAID on in the BIOS configuration but I don't really want to turn it off because in that way my old WinXP would die. I just wanted to give Windows 7 a try before I completely change to it. Could anyone help me? I could provide more information about the desktop if necessary.
I know there have been some discussions on this but I found this thread which actually DOES work for getting an XP system to work from a USB.
(Not only the install but actually Booting and running).
Ngine.de - How to install and run a FULL Windows XP from a USB drive
In theory something like this *could* work for Windows 7 --- anybody had a go yet.
Note - instead of Disconnecting Hard drives as specified in the link just disable them in the Bios - it's quicker and easier.
I know MS says its not possible but people seem to be able to find a way to do amazing things with computers.
I have a 320 gb hardrive which is split into 2 partitions at the moment, C and D. Unfortunately, my C drive, which has Windows XP installed on it at the moment, is only 15gb. I know I need atleast 20GB for a Windows 7 64-bit installation.
As I don't have access to another drive or a large enough USB to back my files up in at the moment, I was wondering if I should just follow the guide here and install Windows 7 in my D drive instead. The thing I wanted to confirm was this:
I read in this thread that if I install Windows 7 on D drive, it'll read the drive it is installed on as C. Is that true? Because I was wondering if I could just install Windows 7 in D drive and then format C which has XP in it (but none of my data).
Then I could rename the blank drive to D. Is this scenario possible? To cut a long story short, I want to install Windows 7 on my PC, get rid of XP, but my C drive is only 15gb and my D drive has all my data (movies, pictures, documents etc) in it.
And tips on how to do that, and is it even possible? I wanna get Windows 7 on my girlfriends computer, and they are not yet selling family licenses in my country (!!), so I was hoping I could upgrade her Win Vista to Windows 7 without having to do a clean format.
View 2 Replies View Relatedi have xp at the moment and upgrading to Windows 7 64bit. but i don't have access to an external hard drive so i can store my data with windows easy transfer
i also have 2 hard drives with one completely empty and one with all my data.
is it possible to just unplug the one with all my data and install windows 7 normally on my empy one and then just replug it in? since i don't have an external would this be a good alternative or possible _at_ all?
I installed Win 7 on a partition on the same drive as XP.
1 - XP was on C: Win 7 installed to F:
2 - I have removed XP from C:.
3 - Repaired Win 7. Win 7 boots fine.
Now I want to move Win 7 to the beginning of the drive but unsure how - as Acronis doesn't allow me to clone to the same drive - even though its another partition.
Is there any way round this?
I want to encrypt my hard drive with TrueCrypt, but it comes up with an error saying that "Windows is not installed on the drive from which it boots". I just reinstalled Windows 7, so it wouldn't be a huge loss to install it again in the same day, but when I install it, how do I make Windows install on the boot drive? When it came up with the partition prompt, I formatted the partitions (there were two) and then deleted the partitions and made it all unallocated space. Should I put one partition on first?
View 6 Replies View RelatedI am looking to use my 1TB seagate SATA II drive for my Windows 7 installation, and was wondering how I should go about partitioning it and how large each partition should be or what I sould put on each partition.
My system will be used for the following:
Computer Games that take up a lot of space (World In Conflict, Empire Total War, Battlefield 2, Call of Duty, etc.)
Music
Video files/ recordings (I have a Hauppauge tv card)
Some Photos
Basic apps like office
Data files
Which of the above items should I put on the OS partition, and which should get their own partitions? How large should the OS partition be compared to the other partitions? Seperate partition for games?
Having one giant drive might be nice to try, but then I would have no where to put my excess video files if I ever needed to reformat. The 1TB drive accomodates whatever video files I can't store on my 2 smaller drives and currently has 120 GB of video on it.
In addition to my 1TB drive, I also have 2 more internal drives, a 250GB Maxtor ATA which is filled with video files and a 200GB WD SATA that I use for my TV card and storing the recordings I make until I have a chance to edit them or move them to a differet drive.
I have a seperate 250GB external drive for backing up data files and music, so the backup issue is taken care of.
So I was not sure about Windows 7 and I have a PC with 2 physically separate internal hard drives. So I retained my vista OS on my C:/ drive (named OS) and did a clean install of windows 7 (using an upgrade disc student edition) on my D:/ drive (DATA).
After setting up, using and liking windows 7, I want to eliminate my vista system, which is boated now, completely. However, apparently with an intel chipset, I can't simply format the OS drive using the disc management utility, even though when I boot windows 7, it is renamed the D:/ drive because the bootloader is on the OS drive. I have tried changing the DATA drive to an active, bootable drive in disc manager. Unfortunately, I can't seem to make it the primary partition.
Originally found this forum on google with a hit on help: cannot reformat c drive
useful information, but I am not completely sure what it means.
After spending about a week customizing my Windows 7 install, I am not too happy about the possibility having to reinstall on the OS drive and go from there. What method should I use to format my OS drive, and still be able to boot the DATA drive. I would then like to use my OS drive for storing music, and pictures, etc.
I have an external HD to work with. I suppose I could image the DATA drive with the Windows 7 install, format the OS drive, and then restore the image to the C drive, but that still leaves the problem of how to format the OS drive in the first place. Also, I've never done a recovery from image before, and am not big on the prospect.
I have xp and windows 7 dual booting and all appears to be working well except 1 thing.
xp was already installed and I already had a free partition. I installed windows 7 onto the free partition. My problem is that windows 7 is on drive F and xp is on drive c. It does not matter which os is started, they always show as xp on C: and 7 on F:
Everything works but most programs like to install themselves on c drive.
When I have dual booted in the past which ever os was start was automatically renamed to C:.
Does anyone have any ideas on how to make it so that when I start XP it is on drive C (as it is now) and then when I start Windows 7 have it be on drive C.
