I use a Linksys WUSB600N wireless adapter and I'm having a problem with it. Every time my adapter is detected, Windows 7 installs its own drivers which are terrible. I can't even install the drivers I want! I have searched everywhere but haven't any luck for solutions. I've even tried installing my drivers over Windows', but that doesn't work well. I have Windows set to "Never install driver software from Windows Update" but it still does.
The setup.exe for my drivers requires the adapter to be plugged in to finish installation, but I can't do that with Windows' drivers inevitably going to install first. Nor can I manually install drivers with the Device Manager if it also requires the adapter to be plugged in. I'm guessing the DriverStore is causing Windows to auto-install these faulty drivers?
I have a Linksys WUSB600N wireless network adapter. I used it in Vista using Linksys's driver for it, and it worked great. Now Windows 7 has installed it's own driver for it and... well, the driver sucks. Frequent connection drops, bad signal strength, etc etc. I've been trying to uninstall the driver Windows installed and get the Linksys one, but no matter what I do it always reinstalls the driver as soon as it detects the device again after I uninstall it.
I've searched around this forum and tried many things... setting Windows Update not to automatically install drivers, using safe mode, etc etc, nothing works. Windows is being particularly stubborn about wanting to install it's own horrible driver.
Since I made the Move to 64-bit a while back, Every once in a while, I would run into a Problem where I needed to Install Driver that was Un-Signed.
As A Security measure in the 64-bit Versions of Vista/7, All Drivers must come with a Secure Digital Signature.
This is not a large problem anymore with the fact that Most Drivers are Signed nowadays. But Older Hardware Drivers tend not to be Signed.
There is a Simple way around this Block.
Open the Command Prompt in Admin Mode (Type "CMD" into the Start Menu and press "Ctrl+Shift+Enter") Enter this Command: bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS Now when you Re-Boot, You should be able to Install those Pesky Un-Signed Drivers.
I have Windows 7 Home Premium 32 bit (x86) , trying to install on x64 architecture (dual core atom proc). I am trying to boot from the DVD, with the Autounattend.xml file on a USB drive (Mushkin 8GB, light blinks when accessed, so I know it is being read from). I have also tried using the file name Unattend.xml per other suggestions.My Autounattend.xml file does not get recognized. No errors are shown, but I explicitly set the locale, language, etc., to US English (en-Us), but I am still prompted by the Windows 7 DVD to select these settings.
I wanted to try Windows 7 Home Basic edition. So I modified build 7201 iso and started installing it into a vhd. After the first restart during installation process it gave me a BSOD. It is telling me that the drive containing the vhd file does`nt have enough space so that the vhd could expand. But i already have enough space left in that drive that is more than 11Gb while windows 7 takes only 8Gb to install.
I downloaded "dotnetfx35" from the Microsoft web site on my Windows 7 64 bit PC. When I double clicked on this file, it said it was extracting files, but I did not see any window popping up to show that the .NET framework is being installed. Now, I see a Microsoft.NET folder in the Programs in the Programs (x86) folder on my C drive.
However, I do not see MIcrosoft .NET Framework 3.5 SP1 in the Start>Programs menu or in the Add/REmove Programs list in the Control panel. Am I missing something? How can I verify that .net framework has in fact been successfully installed?
When Windows7 ships, I will be installing it on my laptop (Dell Latitude D631). This machine currently has Win XP Pro installed on a SATA HDD of 120Gb capacity.
My plan is to remove this disk & put it to one side, and install Windows 7 64bit on a brand new SATA HDD. I have bought a 500Gb WD drive and ideally plan to create 2 partitions - one for Windows, one for my data.
My questions are:
1. Any upfront advice on pitfalls of this approach?
2. Any knowledge (I can't specifically find any data on this, having trawled all sorts of places) of any drive capacity limitation for my Dell laptop - I have heard of 120 or 137 or other Gigabyte sizes as a limit so am now a little concerned that my lovely new 500Gb drive may not be fully usable.
If there's any inherent limitation, what's the way around this? Or will the BIOS 'autodetect' and see all 500Gb or is there something I need to do in BIOS or elsewhere to ensure the whole drive is visible and usable?
3. Finally...can I use the Windows 7 install process to create the 2 or even 3 partitions successfully?
I'm trying to install Windows 7 32bit on one of my drives via Vista, I click install on the DVD and click the drive. It does the first stage of installing and expanding files (whatever that is!). Then it restarts.. upon restart it boots onto Windows Setup and I get the logo which glows for a while then freezes.
I've looked this up and i've removed ram so I just have 1stick of 1gig and i've unplugged various USB items except my keyboard and mouse and still get the issue.
i just bought this new computer and every part of it seems to work like it should (atleast so i belive) and everything is starting nicely and everything is found in bios.
however when i try to install windows 7 x64 and when i come to the part where i have to choose which driver to install my windows 7 on, it cant find any driver.
I have a 320 gb hardrive which is split into 2 partitions at the moment, C and D. Unfortunately, my C drive, which has Windows XP installed on it at the moment, is only 15gb. I know I need atleast 20GB for a Windows 7 64-bit installation.
As I don't have access to another drive or a large enough USB to back my files up in at the moment, I was wondering if I should just follow the guide here and install Windows 7 in my D drive instead. The thing I wanted to confirm was this:
I read in this thread that if I install Windows 7 on D drive, it'll read the drive it is installed on as C. Is that true? Because I was wondering if I could just install Windows 7 in D drive and then format C which has XP in it (but none of my data).
Then I could rename the blank drive to D. Is this scenario possible? To cut a long story short, I want to install Windows 7 on my PC, get rid of XP, but my C drive is only 15gb and my D drive has all my data (movies, pictures, documents etc) in it.
I am looking to use my 1TB seagate SATA II drive for my Windows 7 installation, and was wondering how I should go about partitioning it and how large each partition should be or what I sould put on each partition.
My system will be used for the following:
Computer Games that take up a lot of space (World In Conflict, Empire Total War, Battlefield 2, Call of Duty, etc.)
Music
Video files/ recordings (I have a Hauppauge tv card)
Some Photos
Basic apps like office
Data files
Which of the above items should I put on the OS partition, and which should get their own partitions? How large should the OS partition be compared to the other partitions? Seperate partition for games?
Having one giant drive might be nice to try, but then I would have no where to put my excess video files if I ever needed to reformat. The 1TB drive accomodates whatever video files I can't store on my 2 smaller drives and currently has 120 GB of video on it.
In addition to my 1TB drive, I also have 2 more internal drives, a 250GB Maxtor ATA which is filled with video files and a 200GB WD SATA that I use for my TV card and storing the recordings I make until I have a chance to edit them or move them to a differet drive.
I have a seperate 250GB external drive for backing up data files and music, so the backup issue is taken care of.
I have been working on this for about 5 hours now, searching many forums, downloading drivers, changing Bios settings, etc... but nothing is working. I realize there is a compatibility issue with KV8 and Win7 but a guy at Asus said it might be able to be fixed with certain drivers. I have been fooling around with VIA and Fasttrak 378.
My hard drive is working fine as I am using it right now, but when I get to the Win7 installation to choose where to save it, it does not detect a hard drive. This happened when I tried to install XP pro 64 a while ago as well. How can I make it appear? My system is:
ABS built Asus K8V SE Deluxe AMD Athlon 64 3000+ 2gb G.Skill Ram 160gb Maxtor SATA hd
I guess I'm confused as to why my hard drive is even RAID configured being that there is only 1.
I did a partition, i ran the XP setup, chose the partition, started install, then it copied the files, then it had to restart, it restarted.. but its not moving for the next setup screen, it just jams on the load, "Press any key to boot from CD ... "
It is been there like over 30 minutes now, maybe someone can help me with this problem, thank you in advance.
PS. I restarted it also and then booted it again, and it seems it did not copy those files.. the partition was still empty.
PPS. And as it seems.. it does not run not at all now, i took out the XP cd and it does not load Windows 7 Also.
I am very lost, I have a IBM ThinkPad T42 with an older 20Gig hard drive that is blank, no OS on it, nothing at all. I tried to perform a custom clean install of Windows 7 and get to the part where you can format the drive or install drivers. When I select to install the drivers it can never find any.
What am I doing wrong? I know a little but I guess not enough, do I need to install fro somewhere else? and what drivers is it looking for?
I have a simple question, I recently fresh installed Windows7 and was wondering if I should Install the new mobo drivers from the ASUS site (i have an ASUS P5Q Pro) or should I just keep the current microsoft drives for all the chipsets/lan/etc. The only Thing I installed was the Realtek sound driver. Would there be any advantages to install proper drivers? because right now my computer runs perfectly stable and smooth using the Windows7 ones.
I recently picked up a pre-built machine that came with Windows 7 (OEM) pre-installed and an Nvidia 8400GS. I replaced the 8400GS with a GTS 250 and figured I'd uninstall the drivers that Windows 7 pulled in through Windows Update, and download the latest Nvidia drivers.
I uninstalled the stock drivers in the Device Manager, checked the "delete drivers" box and restarted the machine. Windows 7 dedected the card and immediately started to auto-install drivers. I could skip the downloading of new drivers, but it still installed older Nvidia drivers (dated April or May 2009). Can this be prevented? If so, how?
Windows Update then offered to download newer drivers (September 2009), which I allowed manually (this part is fine). What I'm looking for is a clean way to uninstall the drivers installed by Windows 7 and then manually install the driver package I downloaded from Nvidia.com.
On a side note (should probably make a separate post for this), is it normal that after the Windows 7 desktop is displayed (including shortcut icons), after two seconds the icons reset (become white default icons) and somewhat slowly reload? After a reboot, that is. I don't remember this happening with the 8400GS before I fiddled with the drivers.
My ASUS Notebook was running fine when I went to bed the other night and Windows 7 did an auto update. I logged on the next morning and all the USB, Network Adapter, and Sound drivers were dead. I checked, and it appears that a few of the components of the Windows update did not complete successfully (.Net framework, Silverlight, etc.), so I assume this has something to do with it. I assumed it would be no big deal to fix the drivers, but boy was I wrong. Here's what I've tried (and failed) to fix this.
I have a new monitor, and also a new USB to RS 2343 converter cable that both came with a CD that apparently has Drivers for the devices on them.
They don't start automatically in auto-play to load, and my reading of the file labels in the CD makes no sense to me.
So, with the CD in the drive just sitting there, what do I do to actually get the PC to recognize the Drivers in the Folder(s), and load them in the appropriate places ?
I'm having some problems with my motherboard now with Windows 7. It's an Abit motherboard and I'm getting a warning for the action center which states: "Your power management system is missing a driver" and suggest the uGuru 3.1X.
Now is where things get annoying, Abit is shut down and their driver downloads are dead. Even if they were alive, there has not been made any utility for Windows 7 as it weren't out at the time they closed.
So I have a few questions I hope some of you can answer:
- Is it at all vitial to have this driver?
- Is it anywhere I can get one which work with Windows 7?
if none of the above
- Can I somehow force the action center to ignore this "problem"? I hate having unsolved problems poping up there
A little additional question, anyone else having stability problems with the most recent windows messenger client on Windows 7 64bit?
Does any one have a fix for a Canon D860 Image class multifunction copier/printer?
It is recognized as a USB connection, but Canon has no windows 7 64 bit driver for it. I also hear the printer is being discontinued even though the price is the same as I paid for 3 years ago. It is a great photocopier and printer. Well it used to be a good printer!
I have already tried windows updating and I have driver detective as well. Struck out on all fronts. I looked at someone else's thread and I sent Canon support yesterday. They have not responded although they acknowledged the E-mail. Yeah, I guess this old bird is being sent to the old age home.
64bit soundmax drivers for Win 7 Currant ASUS drivers NFG! I have an i7 1366 MB Asus PT6 Deluxe MB 3gig Quad. 7 says not available, Don,t take MS at thier word right?
This is the version 4 adapter. I've downloaded and installed the driver. It seems to finish the setup as it should and the computer recognizes the driver as installed. The device is listed under the "unspecified" section in the device manager and says it needs trouble shooting.
I bought a Asus U36J laptop back in April of last year and ever since then I have been beating around an issue that I dont seem to be able to resolve one way or the other. When ever the laptop is on battery and in battery saving mode it has my taskbar on autohide. If I turn that off, then it stays off right until it is put back into battery saving mode at which point it is "magically" ticked on again.
Is there no way to simply disable that feature, as its annoying me greatly. I know its tied into the battery saving desktop, and I want to keep the battery saving desktop but want a full taskbar all the time. I found a supposed fix to make that happen, and while it actually makes the taskbar appear all the time, it still is a bad hack as any windows I have open wont "attach" to the taskbar but attaches to the buttom of the screen.
So for the love of god is there no sane way for me to keep the battery saving desktop but get rid of the autohiding taskbar. Otherwise I know Asus most likely wont be my laptop of choice next time aroumd.
I currently have an old P4 running 32-bit Windows 7 RC. I don’t think I can put 64-bit on that machine, but I am considering 64-bit on the retail version when it is released in October. I tested about thirty 32-bit shareware and freeware applications on 32-bit Windows 7 RC and they all work well. My questions concern 32-bit drivers and unsigned 32-bit and 64-bit drivers on Windows 7 64-bit retail.
I have seen references to a BCedit command. I ran Bcdedit /set Bcdedit nointegritychecks ON on my Vista SP2 machine and it ran successfully. I have not tested what it will let me do as I now have no Vista driver issues. Here are my questions:
Which of these is the correct command to disable the signature check on Windows 7 RC?
bcdedit /set loadoptions DISABLE_INTEGRITY_CHECKS
bcedit –SET TESTSIGN NO
Is there any reason to use the correct command rather than using F8 during the boot process?
Does the correct command work for both unsigned 32-bit and unsigned 64-bit drivers on a 64-bit Windows 7 system?
Is the correct command useful on both 32-bit and 64-bit Windows 7 for driver signing issues generally?
I assume the command works for only 1 boot cycle. Given that, is there any reason to run a command to re-enable the driver signing check if one reboots again after the driver installation?
Is there any other solution other than third party software, which I would prefer to avoid as I don’t expect to run into a driver issue frequently?
What is a decent estimate of how many of my 32-bit applications that work well on 32-bit Vista SP2 will install and work well on 64-bit Windows 7 retail, assuming I use the correct command to disable the signature check?
i see a lot of drivers pack for win 7, is it neccessery to have a driver cd installed with win 7, or it's enough if i have the drivers for my hardware as win 7 compatible, so is there any need for that extra drivers package cds if i have the right installer drivers?
Can someone please explain how this works? like where does it put the files etc and can i install the latest NVIDIA drives through the load drivers option during windows 7 install?
