Bsod While Installing Win7 On Vhd
Jun 29, 2009
I am using windows 7 build 7260 as my primary Os.
I wanted to try Windows 7 Home Basic edition. So I modified build 7201 iso and started installing it into a vhd. After the first restart during installation process it gave me a BSOD. It is telling me that the drive containing the vhd file does`nt have enough space so that the vhd could expand. But i already have enough space left in that drive that is more than 11Gb while windows 7 takes only 8Gb to install.
View 5 Replies
ADVERTISEMENT
Dec 25, 2009
I downloaded "dotnetfx35" from the Microsoft web site on my Windows 7 64 bit PC. When I double clicked on this file, it said it was extracting files, but I did not see any window popping up to show that the .NET framework is being installed. Now, I see a Microsoft.NET folder in the Programs in the Programs (x86) folder on my C drive.
However, I do not see MIcrosoft .NET Framework 3.5 SP1 in the Start>Programs menu or in the Add/REmove Programs list in the Control panel. Am I missing something? How can I verify that .net framework has in fact been successfully installed?
View 3 Replies
View Related
Sep 18, 2009
When Windows7 ships, I will be installing it on my laptop (Dell Latitude D631). This machine currently has Win XP Pro installed on a SATA HDD of 120Gb capacity.
My plan is to remove this disk & put it to one side, and install Windows 7 64bit on a brand new SATA HDD. I have bought a 500Gb WD drive and ideally plan to create 2 partitions - one for Windows, one for my data.
My questions are:
1. Any upfront advice on pitfalls of this approach?
2. Any knowledge (I can't specifically find any data on this, having trawled all sorts of places) of any drive capacity limitation for my Dell laptop - I have heard of 120 or 137 or other Gigabyte sizes as a limit so am now a little concerned that my lovely new 500Gb drive may not be fully usable.
If there's any inherent limitation, what's the way around this? Or will the BIOS 'autodetect' and see all 500Gb or is there something I need to do in BIOS or elsewhere to ensure the whole drive is visible and usable?
3. Finally...can I use the Windows 7 install process to create the 2 or even 3 partitions successfully?
View 4 Replies
View Related
Oct 20, 2009
I'm trying to install Windows 7 32bit on one of my drives via Vista, I click install on the DVD and click the drive. It does the first stage of installing and expanding files (whatever that is!). Then it restarts.. upon restart it boots onto Windows Setup and I get the logo which glows for a while then freezes.
I've looked this up and i've removed ram so I just have 1stick of 1gig and i've unplugged various USB items except my keyboard and mouse and still get the issue.
Any ideas?
View 4 Replies
View Related
Oct 23, 2009
i just bought this new computer and every part of it seems to work like it should (atleast so i belive) and everything is starting nicely and everything is found in bios.
however when i try to install windows 7 x64 and when i come to the part where i have to choose which driver to install my windows 7 on, it cant find any driver.
View 2 Replies
View Related
Oct 25, 2009
I have a 320 gb hardrive which is split into 2 partitions at the moment, C and D. Unfortunately, my C drive, which has Windows XP installed on it at the moment, is only 15gb. I know I need atleast 20GB for a Windows 7 64-bit installation.
As I don't have access to another drive or a large enough USB to back my files up in at the moment, I was wondering if I should just follow the guide here and install Windows 7 in my D drive instead. The thing I wanted to confirm was this:
I read in this thread that if I install Windows 7 on D drive, it'll read the drive it is installed on as C. Is that true? Because I was wondering if I could just install Windows 7 in D drive and then format C which has XP in it (but none of my data).
Then I could rename the blank drive to D. Is this scenario possible? To cut a long story short, I want to install Windows 7 on my PC, get rid of XP, but my C drive is only 15gb and my D drive has all my data (movies, pictures, documents etc) in it.
View 5 Replies
View Related
Dec 18, 2009
I am looking to use my 1TB seagate SATA II drive for my Windows 7 installation, and was wondering how I should go about partitioning it and how large each partition should be or what I sould put on each partition.
My system will be used for the following:
Computer Games that take up a lot of space (World In Conflict, Empire Total War, Battlefield 2, Call of Duty, etc.)
Music
Video files/ recordings (I have a Hauppauge tv card)
Some Photos
Basic apps like office
Data files
Which of the above items should I put on the OS partition, and which should get their own partitions? How large should the OS partition be compared to the other partitions? Seperate partition for games?
Having one giant drive might be nice to try, but then I would have no where to put my excess video files if I ever needed to reformat. The 1TB drive accomodates whatever video files I can't store on my 2 smaller drives and currently has 120 GB of video on it.
In addition to my 1TB drive, I also have 2 more internal drives, a 250GB Maxtor ATA which is filled with video files and a 200GB WD SATA that I use for my TV card and storing the recordings I make until I have a chance to edit them or move them to a differet drive.
I have a seperate 250GB external drive for backing up data files and music, so the backup issue is taken care of.
View 3 Replies
View Related
Feb 2, 2010
I have been working on this for about 5 hours now, searching many forums, downloading drivers, changing Bios settings, etc... but nothing is working. I realize there is a compatibility issue with KV8 and Win7 but a guy at Asus said it might be able to be fixed with certain drivers. I have been fooling around with VIA and Fasttrak 378.
My hard drive is working fine as I am using it right now, but when I get to the Win7 installation to choose where to save it, it does not detect a hard drive. This happened when I tried to install XP pro 64 a while ago as well. How can I make it appear? My system is:
ABS built
Asus K8V SE Deluxe
AMD Athlon 64 3000+
2gb G.Skill Ram
160gb Maxtor SATA hd
I guess I'm confused as to why my hard drive is even RAID configured being that there is only 1.
View 12 Replies
View Related
Jun 22, 2009
Since I made the Move to 64-bit a while back, Every once in a while, I would run into a Problem where I needed to Install Driver that was Un-Signed.
As A Security measure in the 64-bit Versions of Vista/7, All Drivers must come with a Secure Digital Signature.
This is not a large problem anymore with the fact that Most Drivers are Signed nowadays. But Older Hardware Drivers tend not to be Signed.
There is a Simple way around this Block.
Open the Command Prompt in Admin Mode (Type "CMD" into the Start Menu and press "Ctrl+Shift+Enter") Enter this Command: bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS Now when you Re-Boot, You should be able to Install those Pesky Un-Signed Drivers.
View 9 Replies
View Related
Jan 5, 2010
I use a Linksys WUSB600N wireless adapter and I'm having a problem with it. Every time my adapter is detected, Windows 7 installs its own drivers which are terrible. I can't even install the drivers I want! I have searched everywhere but haven't any luck for solutions. I've even tried installing my drivers over Windows', but that doesn't work well. I have Windows set to "Never install driver software from Windows Update" but it still does.
The setup.exe for my drivers requires the adapter to be plugged in to finish installation, but I can't do that with Windows' drivers inevitably going to install first. Nor can I manually install drivers with the Device Manager if it also requires the adapter to be plugged in. I'm guessing the DriverStore is causing Windows to auto-install these faulty drivers?
View 3 Replies
View Related
Jun 2, 2009
I did a partition, i ran the XP setup, chose the partition, started install, then it copied the files, then it had to restart, it restarted.. but its not moving for the next setup screen, it just jams on the load, "Press any key to boot from CD ... "
It is been there like over 30 minutes now, maybe someone can help me with this problem, thank you in advance.
PS. I restarted it also and then booted it again, and it seems it did not copy those files.. the partition was still empty.
PPS. And as it seems.. it does not run not at all now, i took out the XP cd and it does not load Windows 7 Also.
View 4 Replies
View Related
May 13, 2009
I am very lost, I have a IBM ThinkPad T42 with an older 20Gig hard drive that is blank, no OS on it, nothing at all. I tried to perform a custom clean install of Windows 7 and get to the part where you can format the drive or install drivers. When I select to install the drivers it can never find any.
What am I doing wrong? I know a little but I guess not enough, do I need to install fro somewhere else? and what drivers is it looking for?
View 1 Replies
View Related
Aug 22, 2009
My wife's computer with 7600 RTM 64-bit installed is experiencing about daily BSOD errors. She had similar problems under XP 32-bit as well and I tried replacing various components and drivers to see if I could resolve the problem. Nothing seemed to help. The problem might be resolved for a while, but eventually always came back regardless of what I tried to do.
Restarting the computer Windows presents a "recovered from serious error" dialog and displays an error message. The message we typically get is similar to:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 4e
BCP1: 0000000000000099
BCP2: 00000000000D3BFA
BCP3: 0000000000000002
BCP4: 00000000000D3DF9
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:WindowsMinidump
View 3 Replies
View Related
Nov 3, 2009
I've recently replaced my Win7 (7100) x32 with the x64 version in order to make use of more memory (not yet installed). However, although the rig I'm using had no problems in x32, it keeps BSODing in x64. Are there any commonly known reasons for BSODs in x64 when not in x32?
I have all drivers installed, updated and seemingly working. I get a BSOD within about 20 mins of booting usually. No temp issues with CPU - all under 30 idle and BSOD isn't necessarily when the CPU is stressed.
Specs:
Quad Core 2.4 Q6600
Asus P5K Mobo
Asus 8800GTX
2*1Gb Corsair XMS2
View 2 Replies
View Related
Oct 4, 2009
I've put together a new clone system with the intent of running 64-bit Win 7 Pro on it. Until it becomes available, I have 32-bit XP Pro installed on it. Nothing is overclocked, in fact, the memory is "underclocked" for stability. I'd rather have it stable than gain some trivial performance improvement.
Previously, when I first built it up, I installed 64-bit Ubuntu "Jaunty" on it with 8 GB of RAM installed in it (4 X 2GB). The Linux distro installed and was perfectly stable.
To get a "heads up" on Win 7 issues, I downloaded and installed the trial Enterprise edition. Since I couldn't find any MD5 for the ISO, I downloaded the file twice and did a binary compare on the two downloads to ensure they were the same. Also, I see that the Java applet that downloads the ISO file also has some kind of "verify process" built-in that runs at the end of the download (a checksum?). I burned a DVD in XP Pro using Nero 8 with data verification on (after burning, it reads the burned disk and compares the disk's contents with the ISO file).
Since 32-bit XP Pro can't even fully use 4 GB, I uninstalled 4 of the 8 GB (two modules) when I installed XP on the box. When the entire 8 GB was in the MoBo, I ran MemTest86+ for long periods without errors. To do so, however, I had to "underclock" the memory to DDR2-800 speeds. It couldn't successfully run at DDR2-1066 speeds. A problem that, by checking various support BBS's, was found to be common with my MoBo and the RAM modules in question. After pulling the two modules, I left the memory timing at the conservative settings. I also let MemTest86+ run overnight and got no errors with the two modules installed. My plan is (or, was) to put the entire 8 GB of RAM back after I got 64-bit Windows 7 running on it.
View 9 Replies
View Related
Feb 28, 2010
i noticed if i keep my system on overnight i will find an error message saying "windows has recovered from an unexpected shutdown" with the following messages
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7600.2.0.0.768.3
Locale ID:1033
Additional information about the problem:
BCCode:3b
BCP1:00000000C0000005
BCP2:FFFFF80002C82105
BCP3:FFFFF88007C5AA20
BCP4:0000000000000000
OS Version:6_1_7600
Service Pack:0_0
Product:768_1
Its seems to happen when i leave the system on over night, i also had a problem with the system coming out of sleep mode so i disabled sleep and hibernation, i feel like the 2 may be related, can anyone help?
SPECS:
Core i7-920 2.66GHz
ASUS P6T SE Intel X58
ANTEC TP-750w
Win7 Home Premium 64 Bit
OCZ OCZ3P1333LV6GK 6GB PC3-10666 (DDR3-1333) DDR3 - 12G total
WD CaviarGreen 1TB
OCZ Agility Series 120GB SATA II MLC Internal Solid state disk (SSD)
XFX HD-585A-ZNBC Radeon HD 5850 (Cypress Pro) 1GB Black Edition
Trouble shooting done so far:-
Memtest 86 - no errors after a full pass.
updated video card drivers no help ( also windows message center is saying i dont have the video card driver for a hd 5700 series card installed, but i have a 5800 series card, with up to date drivers.
View 3 Replies
View Related
May 7, 2009
I have installed all betas I could find, all were/are running fine. But the RC is a lot of pain. It fails into BSOD at the last step of the install "Completing installation". The error reads BAD_POOL_HEADER. I tried 64bit only.
I verified the ISO checksums, I have read the recommendations here, tried Safe mode, disabled display, installed from disc or from inside Windows, from HDD, changed BIOS settings to safe defaults... No luck. I even tried to integrate newest video drivers from nvidia.com using vLite.
My PC is Q6600, Gigabyte P35ds3l, 6Gb ram, evga Nvidia 8800gts, old WD Raptor 74Gb, USB mouse and kbd, Dell lcd.
View 5 Replies
View Related
Oct 27, 2009
upgrade my system from Windows XP Pro SP3. The setup starts and gets past creating a user account, setting a computer name etc and then restarts and looks like Windows 7 is going to startup and then I get a BLUE SCREEN OF DEATH with:
STOP: C000021a [Fatal System Error}
The intial session process or system process terminated unexpectedly with a status of 0x00000000 (0xC0000001 0x00100400)
It then mentions about dumping the memory out to disk and reboots. If i press F8 and attempt to boot SAFE MODE I get a requester saying that setup cannot be completed in Safe Mode. If try the startup recovery the first time it says it fixed a problem and wants to restart again but it has fixed nothing. Next time the startup recovery just runs and doesn't appear to finish.
I have run the Windows Memeory Diagnostic within the setup and memory checks out fine. I initially thought the onboad audio chipset was the issue and disabled that but it made no difference. I did get one successful installation but it eventually crashed and burned with the same error after approximately 12 hours.
View 9 Replies
View Related
Sep 27, 2009
I'm having trouble installing windows 7 from my flash drive onto my netbook that runs winxp.
Where I used UNetbootin on my Vaio (Vista) laptop computer to burn an iso image to my flash drive. I then booted up my netbook, entered BIOS, changing the USB booting priority to the USB. However, I then get the error bessage "Error BOOTMGR is missing ctr alt del" .
View 3 Replies
View Related
Dec 27, 2011
I am trying to install SP1 for W7 on an x64 machine, but run into a BSOD during the process (one of the times the machine reboots to install the SP). The stop code is the classic 0x7B, but there is no "title" for the error.W7 ran fine for a few days, as I was gradually installing updates. However now, while installing SP1 I can't finish the installation or even boot into safe mode.
View 4 Replies
View Related
Dec 22, 2011
What happens is that when I try to install windows 7 it gets to the "expanding files" and then I get the BSOD. It says: A problem has been detected, blah blah
PFN_LIST_CORRUPT
[WALL OF USELESS TEXT]
*** STOP: 0x0000004E
I would upload some crash file but I don't have an OS but I'm trying to get a high quality camera ASAP
System specs:
Motherboard: Asus M4A78T-E
CPU: AMD PHENOM II X4 3,0GHZ
RAM: [KINGSTON HYPERX DDR3 1600Mhz 4GB] x2
VGA: EVGA GTX470
View 6 Replies
View Related
Apr 12, 2012
I started to experience bsods lately when I am trying to install (and sometimes uninstall) programs. PC would not boot past 'starting windows' logo and I got a blank screen with Windows failed to start.
View 9 Replies
View Related
Jul 1, 2012
when ever I install the VGA driver (any version of it- from the oldest to the newest) my laptop shows me a BSOD, each time with different messages (such as: page fault with non paged area, system service exception, memory management,...
I've even recovered it using the image disks which I've created when it was a brand new, but I still have the same problem. All the mini dump files attached.
Specs:
Sony VAIO VPCEA4BGX
OS: Windows 7 Professional X64
CPU: core I5, 2.67 GHz
RAM 4GB DDR3
VGA: ATI mobility Radeon HD 5470
HDD: 500GB Samsung
View 3 Replies
View Related
Jul 4, 2012
I get to about the 4th and last installation disc of Max Payne 3 and I get BSOD. It looks like its almost 100% completed then and then I receive the BSOD. I have updated all my drivers, motherboard, graphics, ethernet, sound.
View 9 Replies
View Related
Sep 10, 2012
My computer had been shut down for a few days. When I came back and booted back up, I noticed that AVG was no longer running. I couldn't seem to get it to start, so I tried uninstalling it since I had the 2012 version anyway, so I could update to 2013 and hopefully fix the problem. Every time I try to uninstall, I get a BSOD. Every time I try to install the new version, I also get a BSOD.
I haven't installed anything new or added new hardware, so the only thing I can think of is the latest AVG update did something. The last new program I installed was Guild Wars 2, but that was weeks ago (with no issues). At first I thought maybe this was a virus, but it looks like this is a common issue? Files attached.
View 1 Replies
View Related
Sep 13, 2012
in a last couple of months I constantly get BSOD everytime I try to install utorrent, regardless what version it is. I tried to find an answer on utorrent forums but i did not so I am trying to find it here. I tried verifier, after verification, it showed that NDIS IM driver aswebr.sys should be verified and when I click on finish, it says "No options changed" and it still remains unverified. It suppose to be a problem with Realtek ethernet drivers but I installed latest using Live Update. Can you help me verify aswebr.sys without having to reinstall whole Windows 7 Ultimate that I have?
View 9 Replies
View Related
Sep 28, 2012
I've been getting blue screens for the past 2 days everytime I try to install Diablo 3 or render game footage with a program. It also happened once for no reason.
View 9 Replies
View Related
Dec 7, 2012
went from 7850, to 7970, to gtx680 that is now RMA back to the old 7850, and getting a new 7970 on sunday. Now, I uninstalled everything I can find that has to do with either nVidia or AMD, and it still BSOD right on startup: Used Driver Sweeper to clean all drivers, and even went manually and deleted every single one that has AMD, Gigabyte or Radeon written on it.
View 2 Replies
View Related
Oct 8, 2009
Well, after deleting Windows XP, Vista and Ubuntu and reinstalling 7 (32bit) as a single OS I maybe resolved my problem with Sapphire HD 3650 not working on 7 but now, when I install Windows 7 drivers (weird, my agp card gets recognized with normal drivers) and reboot I get BSOD before entering the login screen of Win 7. Any help?
View 4 Replies
View Related
Oct 10, 2010
I already have Win7x64 installed but right now is crippled by a virus. So instead of installing a anti virus program I just decided that I want to start anew and reformat everything and install Windows 7 fresh. So I throw the disc in and boot from it, it loads up some "files" and goes to the Windows 7 animation, then it blue screens. The error message that I get out of it says wimFsf.sys is the culprit and after that it says page_fault_in_nonpaged_area. I tried swapping out ram sticks, right now I have 2 2 gig rams in there,I tried taking one out, switching the spots, and even put 2 1 gig rams in there but nothing worked.
View 9 Replies
View Related
Nov 8, 2009
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
View 1 Replies
View Related