Have the UEFI Option in the boot menu of the ASUS K42F notebook. Regrettably, boot to USB is not an apparent option. Have emailed Asus support and the reply demonstrated no knowledge of the feature. There is an option that allows the entry of "command line" entries. The setup utilities are from American Megatrends (AMI).
View 2 Replies
Currently having a wake on lan issue with a certain computer.
The machine is setup correctly but the windows boot information is stored in a 100mb UEFI partition, and when the computer wakes on lan, it will not boot windows, just sit at a blank screen. When it wakes on lan it is trying to boot from the legacy device (same blank screen happens if you choose to boot from it from bios) ive tried updating the bios but no luck, all settings seem to be as they should be.
Is there some trick to get it to load the UEFI MBR, or is there a safe way other then reformatting the machine to move the MBR over to the legacy device itself?
I recently just build a new setup with Asus P8Z77-V LK, this motherboard comes with UEFI boot and legacy BIOS boot support.So I tested install windows 7 in both mode, and I didn't find any advantage of UEFI consider it is a new technology been promoted quite a lot for recent years.The benefit I found is: a graphic BIOS setup, which is useless to most users if you don't OC. Even you did, I still find using keyboard to navigate through the menu is much easier than mouse.Faster boot time? very negligible, could be 31 seconds compare to 28 seconds. As I timed use my stopwatch, the value could include a few seconds human error as well.Support boot from > 2.2TB HDD? nowadays most user use SSD as boot drive so this really doesn't matter.GPT disk partition? don't see any benefit here compare to legacy MBR...
View 3 Replies View RelatedSo yesterday in the early AM's I was browsing my internet and all the sudden, bam.i lost my internet.No reason at all, it just happened. This is only my computer, everything else works fine (If internet is out, our TV's don't work)When I go to my little internet icon in the taskbar, it says Unidentified Network and I have no internet access what so ever.When I run CMD and use ipconfig /release I get this:"An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified."I also got this error before:"An error occurred while releasing interface Local Area Connection : An address has not yet been associated with the network endpoint." Tech support kept telling me to use ipconfig /flushdns but whenever I entered it into CMD it gave me an error saying something along the lines of "command unrecognized" I cannot give you guys the full text of what CMD says since it's on a different computer.I am using a direct ethernet cord, not wireless.
* ipconfig /release and /renew and /flushdns
* Turn off firewall
* Update and Reinstall Driver
* Restarting my modem/router
* Restarting my computer
* Unplugging my ethernet cord and replugging it (also leaving it unplugged over-night)
* Manually assigning the 12 code I'm assuming IP
The device cannot start. Error 10.I have installed the drivers various times and the controller will not work.I have an MSI Z77 GD55.
View 9 Replies View RelatedI haven't posted on here for a while because I've been taking a break from my computer and playing LOTRO which was causing me occasional bsod's which were really getting me down. I took a break from LOTRO for around 6 months and not once did I get a bsod on my computer despite my husband and son playing other games on my computer.I've recently come back to LOTRO since the new update of migrating to the US servers to see how it would run on my computer and to see if the bsod's returned. They did and the new update hasn't changed a thing. Each time I get the bsod my graphics card is named as the cause of the culprit.I have a Dual GPU and I found that AMD says this. Quote.For The Ultimate Visual Experience, be sure to select ATI CrossFireX ready motherboards for AMD and Intel processors and multiple ATI Radeon HD graphics cards. Now I've done a search and it looks like my motherboard - Gigabyte GA-770T-USB3 -isn't Crossfire ready.Before I take the plunge and buy a crossfire ready motherboard, would having a Dual GPU cause problems if my motherboard isn't crossfire ready? Or would it not make a difference as I've only got the one card? I've downloaded the profiles for the ATI drivers for Crossfire/dual GPU's but I haven't installed it yet, as I'm not sure whether because my motherboard isn't Crossfire ready it's going to cause further conflict and even more problems when I'm playing LOTRO.I didn't realize that when I got the graphics card that it was a dual GPU
View 6 Replies View RelatedI know that I can use SFC in an active mode SFC /scannow where it will replace files in an effort to correct problems BUT I would like to just have it run an integrity check instead without it taking actions.
View 7 Replies View RelatedI have a 320 gb hardrive which is split into 2 partitions at the moment, C and D. Unfortunately, my C drive, which has Windows XP installed on it at the moment, is only 15gb. I know I need atleast 20GB for a Windows 7 64-bit installation.
As I don't have access to another drive or a large enough USB to back my files up in at the moment, I was wondering if I should just follow the guide here and install Windows 7 in my D drive instead. The thing I wanted to confirm was this:
I read in this thread that if I install Windows 7 on D drive, it'll read the drive it is installed on as C. Is that true? Because I was wondering if I could just install Windows 7 in D drive and then format C which has XP in it (but none of my data).
Then I could rename the blank drive to D. Is this scenario possible? To cut a long story short, I want to install Windows 7 on my PC, get rid of XP, but my C drive is only 15gb and my D drive has all my data (movies, pictures, documents etc) in it.
My desktop connects to my router via a netgear N300 wiress USB adaptor. Also connected to my router is my media server PC which has a shared network drive.On bootup My desktop looks for the mapped network drive before it loads the USB. So it always shows the network drive as being unavailable. This is soon sorted by double clicking on the network drive icon. Is there a workround so that the PC looks for the network drive after loading the USB network has been established?
View 4 Replies View RelatedI want to ask how can i use uefi ? my computer specs are:-Intel i5-2500kIntel DH67BL8 GB Ram250GB Seagate i have a windows x64 usb as well.
View 7 Replies View RelatedI have a PC that has windows 7 ultimate installed by a friend with a disk that legally allows multiple installations.Unfortunately my operating system isnt working well. it wont install a service pack or printers etc and I would like to do a fresh install from scratch. My friend tells me if I use his disk it will use up another of his product keys . however I am wondering is there any way I can re-install it with the existing product key so as not to use up another windows installation from his batch of licence keys
View 1 Replies View Relatedi cant connect my nokia bh 503 headphones to my hp laptop?
View 1 Replies View RelatedI have a Server connected to a fixed IP on local LAN say 192.168.0.7 Now I just want to use some client software REMOTELY (outside the LAN) which simply requires me to type in IP address + user / password. Now if my Router reports my current IP address as www.xxx.yyy.zzz is THAT the address I should use and do I need to port forward anything -- The application is Vsphere NOT RDP as RDP needs me to connect to a WINDOWS machine (Real or VM inside tha LAN).On the server I can access ANY of the running VM's from the Vpshere client.I've actually "Poodlefaked" it so I can get my INTERNET IP address by starting the No-IP program from within any of the VMs at start up. This should allow mw to retrieve the current Internet IP address.(No-IP - Dynamic DNS, Static DNS for Your Dynamic IP)The No-IP works fine for me --there are others you can use for similar functions when you have dynamic IP's.
View 1 Replies View RelatedI just got a new Dell XPS 8300. I will be placing a Crucial M4 ssd in it to be my main drive. I've been reading up on what to do, and my main concern so far is the firmware update. It sounds slightly more complicated than I'd like, and I am trying to decide if it's definitely something I need to do before installing Windows7 on the ssd.
Would I be a fool to just install it as-is, with whatever firmware comes on the drive?
I will be installing Windows7 Home Premium on it, but then will be paying for the upgrade to unlock it to Professional.
set up my parents brand new PC running Win 7 64 bit. Basically everything is fine except for 2 things which may be connected?1)Even though I connect to the internet no problem the little blue circle continues to spin in the taskbar as if it's trying to connect.2)I installed the latest version of firefox and that shows a banner along the top of the screen constantly saying something along the lines of updates are being downloaded.I have asimilair setup at home and have not come across this before.I've also installed AVG,Ccleaner and Comodo firewall.
View 3 Replies View RelatedI'm still trying to get a hang of how UEFI works. I did take a look at it when I went to install my OS (And again when i got a SSD), but I couldn't make heads or tails of it and used BIOS.
does UEFI make a drastic difference over BIOS, and can I convert without having to do a complete wipe and install? or how would go about switching to EFI, or is it worth it?
I've Lenovo G570 I want to know that I can install Windows 7 in UEFI on my laptop or not? I didn't see any UEFI option in my BIOS menu, the specs are:
Lenovo G570,
Intel Core i5-2430M 2.4Ghz
4GB DDR3 SDRAM
Intel HD Graphics 3000
I am swapping out my older X58 BIOS motherboard for a UEFI motherboard with a new Ivy Bridge i5. I'd rather not have to reinstall Windows 7, and just want to make sure I can swap the boards and CPUs without issue.
View 3 Replies View Relatedthis has been dealt with in various places but not to my total satisfaction. So bear with me if the answer is hidden somewhere in the forum.I've got an oem asus with 2 hdds the first of which has Win 7 64 home pre-installed via uefi boot manager. It is a gpt formatted disk. The second disk is empty and is set up with mbr. I wish to dual boot onto the second disk with Win 7 32 Pro but fear a rejection due to the fact appparenly Uefi will not manage 32 bit installs/boots. More to the point , will the mbr variance on the 2nd disk somehow make for an exception to this 32bit 'prejudice' on the part of uefi or simply make matters worse? My bios has a single option regarding a legacy setting connected with uefi which is disabled. PxO.or rather. Gregrocker seems to think obviating the problem with 2 physically separate installs (i.e. Hdd disconnect) will allow a Bios based boot as opposed to a Uefi/Windows managed one. Is this workaround a sure thing and my only option or is there a practical way to go the classic route with the auto boot loader screen on start up? Perhaps a better way to put it is..on dual boot systems is it true that you can't have BOTH uefi and the bios directing the show. You gotta choose one or the other. Frankly, to my novice mind this whole problem seems to be a regression from the XP days.
View 9 Replies View RelatedI am installing Windows on my new SSD. I made the disk GPT (instead of MBR), and installed Windows (tried 5 times now) with similar results. Either error 0xc0000225 or boot loop of "Windows is loading files" ... or it throws me back to my BIOS Boot selection screen where I came from ... what might be the problem? Windows 7 still cant handle GPT partitions? Or it doesnt like the new SSD? I managed to install and reboot successfully once by removing all other drives (except the SSD which I am installing into), works, I can enter Windows. Then once I installed back the other HDDs, it fails again ...
View 4 Replies View RelatedJust received a new OCZ Agility 3 SSD and are having some issues. I've installed the drive and formatted it, I have also tried to update to firmware on it countless times all of which have resulted in 'Firmware Download Failed'. The drives also seems to be disappearing occasionally and requires a restart before it appears again. I want to update the firmware before I clone my old HDD to it.
View 1 Replies View RelatedI know this might not be the place for this question but i have just downloaded a Firmware update for me modem but the files came in .rom and . bin and i am unfamiliar with these files how do i open them or with what do i open them with???
View 2 Replies View Relatedi am having no luck finding information so as to install a new 3T hard drive. this is a nightmare. one of the first bits of info i need is whether my motherboard supports or uses UEFI or EFI..since there do not seem to be any manuals available (i've checked.)
View 2 Replies View RelatedSince UEFI exists, some people talk about BIOS replacement by UEFI in short-term (2011 for exemple) (see "News").Who never has problem with BIOS bugs ? I must fight against several problems on one of my mobos because of its incorrect BIOS code, essentially for long time boot BIOS and very buggy S3 sleep mode.However, when I read many posts about people who have installed their Windows 7 x64 in UEFI mode, I'm afraid of some new problems that UEFI causes, according to these people, even during a Windows session, even if installation was fine.I would like to know your experience about UEFI, on motherboards which support it (my motherboard is an Intel DG45ID which proposes UEFI boot).
View 2 Replies View RelatedI have an ADATA S510 120gig SSD, i tried downloading the Firmware upgrade tool seen on this page S510 SATA 6Gb/s Solid State Drive, Download, S510, 500 Series, Solid State Drive, Welcome to ADATA
I opened the tool and it didnt find my SSD drive. I then downloaded the file itself to try and manually install it but it is a "VIC" file, i dont even know how to open it.
Does anyone have experience with updating their firmware on these SSD drives?
edit: after digging around on my machine i found that i have firmware 3.3.2 which is apparently the latest firmware out there right now (i didnt know that till i just found this info out, this machine is 2 weeks old)
I can watch DVD's but get a firmware error when trying to burn CD's thru windows explorer.I use windows 7(32 bit) OS.
View 2 Replies View Relatedi want to find firmware for lenovo SL500
View 2 Replies View RelatedI was wondering if anyone might be able to address this: I'm getting a HAL error in my win7 event viewer log -- event i.d. = 12...description reads " platform firmware has corrupted memory across the previous system power transition.
It always throws the error up when going in or out of sleep mode in windows 7 x64
I want to install Windows 7 to a UEFI-compatible netbook that only has a SD Card slot and a single USB Port (the netbook I'm refering to is the CR-48 if anyone is curious)I know this computer supports UEFI (I was able to start the Fedora 14 EFI and Windows 7 x64 EFI installers) but my assumption is that EFI-based OS installs require you to have the disc inserted (both installers failed to actually load).
View 2 Replies View RelatedI have an Asus Z68 mainboard with UEFI-BIOS. Windows 7 Professional 64bit is installed in UEFI mode on a GPT partitioned drive (SSD). It worked flawlessly.Now I added my second, old harddrive, that is still MBR formatted.Windows won't start anymore, instead I am seeing "Windows is loading files", then a blinking cursor, and that's all.I have two options in BIOS regarding boot priority:
1) I can boot from the SSD as primary priority
2) I can select an option called "Windows Boot loader", I think this refers to the UEFI boot code that Windows wrote to the UEFI.
If I select the first option, I get the "Windows is loading files screen" and then the "Windows has detected a startup error, do you want to repair the system startup" screen. If I select "Start Windows normally", I get a blinking cursor and then nothing. If I select "Repair startup", I see "Windows is loading files", and then again the "Startup repair screen". It is an endless loop.If I select the second option, I get "Windows is loading files", then a blinking cursor, and nothing more.Is there any way to get my Windows to boot again without disconnecting or re-partitioning the old harddrive? Note that the old harddrive is NOT for booting, as it is just a datastore.
I am getting a Razer Deathadder 3500 DPI Gaming Mouse for Christmas from amazon.com. I am really excited about it but heard it had driver and firmware issues that could totally break the mouse. What should I do when I receive the mouse? Should I use the CD Drivers, plug in the mouse and then update them from razerzone.com? Should I install the drivers, plug in the mouse, then install the firmware? Should I install the CD, plug in the mouse then install the drivers and firmware from razerzone? I have heard that you should install the drivers and then the firmware. DON'T Want this mouse to break the first day. Oh and I don't even know if it comes with a CD
View 5 Replies View Related
