I am swapping out my older X58 BIOS motherboard for a UEFI motherboard with a new Ivy Bridge i5. I'd rather not have to reinstall Windows 7, and just want to make sure I can swap the boards and CPUs without issue.
View 3 Replies
i am having no luck finding information so as to install a new 3T hard drive. this is a nightmare. one of the first bits of info i need is whether my motherboard supports or uses UEFI or EFI..since there do not seem to be any manuals available (i've checked.)
View 2 Replies View RelatedCurrently having a wake on lan issue with a certain computer.
The machine is setup correctly but the windows boot information is stored in a 100mb UEFI partition, and when the computer wakes on lan, it will not boot windows, just sit at a blank screen. When it wakes on lan it is trying to boot from the legacy device (same blank screen happens if you choose to boot from it from bios) ive tried updating the bios but no luck, all settings seem to be as they should be.
Is there some trick to get it to load the UEFI MBR, or is there a safe way other then reformatting the machine to move the MBR over to the legacy device itself?
I recently just build a new setup with Asus P8Z77-V LK, this motherboard comes with UEFI boot and legacy BIOS boot support.So I tested install windows 7 in both mode, and I didn't find any advantage of UEFI consider it is a new technology been promoted quite a lot for recent years.The benefit I found is: a graphic BIOS setup, which is useless to most users if you don't OC. Even you did, I still find using keyboard to navigate through the menu is much easier than mouse.Faster boot time? very negligible, could be 31 seconds compare to 28 seconds. As I timed use my stopwatch, the value could include a few seconds human error as well.Support boot from > 2.2TB HDD? nowadays most user use SSD as boot drive so this really doesn't matter.GPT disk partition? don't see any benefit here compare to legacy MBR...
View 3 Replies View RelatedI am going to change my motherboard and CPU. I only have a Windows 7 OEM that i already used with my first motherboard.Can i just change the motherboards and boot from my HDD to use the same Windows 7 licence, or do I have to reboot my computer and try to re-install my already used license?
View 5 Replies View RelatedI want to upgrade my system to a New MotherBoard and Processor. I have the full Retail version of Windows 7 64Bit. Anyway two questions I have
1) Do I need to buy a new Windows 7 licence or will it Activate OK when I install the new MotherBoard
2) Do I need to re-install Windows 7 or will it just be a case of installing the new chipset drivers etc
I have an Intel Motherboard which I am changing to a Gigabyte one.If I were to do this myself, I would take proper steps to insure that Windows will boot with the new hardware. I would update my Intel Sata controller driver to a Standard AHCI 1.0 Serial ATA Controller. Then, SHUTDOWN the computer (not restart), then install the new Motherboard and all should be fine. Windows should install the new drivers.The problem is, my computer is being serviced for free at the place I purchased it from. So I don't have access or communication with the lab. I'm sure they are professionals but I want to be sure they don't mess up my C drive or drivers. So I have a few choices:
1. Update the controller driver to Standard, turn off the computer and send it to the lab (maybe with a note, asking that they install the motherboard BEFORE they turn the computer on).
2. Trust them that they know what they are doing and hope they will first turn the computer on, uninstall the Intel controller driver, and then install the new motherboard.
On a Win XP machine you could delete the registry keys under HKLMEnum as the last step before removing the MB and when the new MB was installed the Plug & Play would install the your hardware drivers and properly configure the new MB.Is there a similar process that will work with Win 7? There is no HKLMEnum key in Win 7 registry. There is a HKLMSystemControl Set 001Enum.
View 3 Replies View RelatedI'm changing my motherboard and would really avoid to reinstall windows 7. Is it possible without causing too much instability ? CPU, RAM, video card and all other hardware will stay the same.
View 11 Replies View RelatedI recently got a new motherboard and installed it into my desktop. I had win7 on my HD and thought it would be a good idea for a fresh install. Well upon start up it always automatically restarts at the "Windows is starting" screen with the logo. I have tried starting in safe mode, I have tried repairing and installing with the win7 CD and a bootable win7 usb, I have tried disabling the "Automatic restart on system failure" option. Nothing is working, it just restarts and reboots just to do it again.
View 2 Replies View RelatedI'm trying to find an update for the P5Q motherboard and I'm having a hard time trying.
View 1 Replies View RelatedMy master boot drive is on Ch0 (IDE) my SSD is on Ch4 (SATA) in the bios. How do I get my SSD to Ch0 so it's seen as the Windows Boot Drive (Master) for Windows to Boot, it is just a matter of it plugged into the right SATA port on the board ?
View 9 Replies View RelatedI just got my Windows 7 pro 64bit today and before i installed it i searched on the net if there any problem with the p5QL PRO MotherBoard,(Bios Version) anyway
right now my bios version/date 0902, 28/11/2008.
i never updates a bios before i don't want to blow up my motherboard either lol
i looked on support.asus and i found updates, version 1001 or higher 1004
but i don't want to upgrades it if i don't need too , anyones know if i really need to upgrades it to support win 7
cause i saw many thread here talking about win 7 64bit that don't work well with 9800GT
i dunno if the driver are the cause or the motherboard itself,
I just swapped out my old motherboard since it was quite rubbish (really old packard bell m-atx board) for a brand new ASrock P5B-DE motherboard.
However after installing the board and plugging everything back in exactly where it came from on the old board, the PC cant boot into windows 7 64bit. I've tried the repair option and it doesn't work.
I've tried disabling and enabling various options in the BIOS. Also tried removing the memory and only using 1 stick then tried both sticks in different slots and that hasn't changed anything.
I've tried inserting my Win7 CD but it doesn't seem to boot from the DVD drive (will keep trying to see if it can).
System specs are:
Intel core 2 Quad Q6600 @ 2.4GHz (using Freezer Pro7 CPU cooler)
Samsung DDR2 800mhz Ram (2GB x 2)
160GB 7200RPM Hitachi HDD
ATI (XFX) 5830 1GB GPU
Zalman 500W PSU
my next point of call is to try a lower end GPU as i've still got my Nvidia GTS 250 and doesn't use any external power from the PSU.
(P.S. I'm not overly bothered about doing a clean install as i recently did one anyway and I haven't had a huge amount of programs installed on the pc since then. But if I can fix this without a clean install that would be preferable)
Mine is gigabyte g31 mother board it is taking too long time to install windows 7 or 8 into it , it will asks press any key to boot from CD\DVD and i pressed after that ,it will start loading windows files and logo will appear and it takes more than 3 minutes to show install windows and also after that it takes 3 minutes to show setup is starting up.
View 3 Replies View RelatedAt my company I setup and deploy many windows 7 machines. I use a start-up batch file to do most of the work and a few other files in the start-up folder, this is all imaged to the hard drive with a hard drive duplicator. The batch file runs once and deletes it self. Anyways, that is the general idea of what is going on. the only thing left that I have to do manually is change the BIOS settings, USB enabled/disabled, behavior on power up, BIOS password, ect... Is there any way I could automate this process, preferably a command line?
View 4 Replies View Relatedi've recently decide to update all of my PC components , and stuck on motherboard bios. i've red the manuals , and it says to download "asus update utility" on their site , but when im choosing "windows 7 64" and downloading the utility it says that i should download 64 bit application . so is there any other way to update my bios ? or..
View 9 Replies View RelatedAbout a month ago, one day when I turned my computer on, the BIOS display side had shrunk, leaving a 1 inch black border around the edge of the screen. This went away when I turned the computer on the following day, but has now come back. It doesn't seem to have any other adverse effects, but it bugs me. Can anyone explain why this might be and what I could do to make my BIOS full screen again?
View 3 Replies View RelatedI like to keep my BIOS time set to UTC, which works perfectly with Linux, but whenever I log into Windows, the displayed time is UTC even though I have set the timezone. When I change the time manually or with synchronization, it changes BIOS time itself instead of simply using it as a base for localtime.
View 3 Replies View RelatedI have the above motherboard. I have been using a video card which is three years old and thought I would try out the integrated video before my video card died. I switched it in the Bios and switched the monitor cable and it started fine on integrated video. The only thing is that the first screen where I can enter Bios does not show, so I am unable to enter the Bios. I tried hitting the delete button on the blank screen but nothing happens. I was able to shut down the PC and switch back to the video card, so I am OK. Does anyone have any idea why the first screen doesn't show on integrated?
View 2 Replies View RelatedI updated the bios to the latest version on a gigabyte GA-Z68X-UD3H-B3, using @bios application in windows. I have two disks in a RAID1 All was working fine but upon boot i was getting a message about enabling ACHI. Stupidly curiousity got the better of me and I eventually I said Yes. The next time i turned off i couldn't boot to windows. I went into the bios and noticed that the SATA was set to ACHI, but the bios still saw my RAID volume set up and everything appeared Normal, so i changed this setting to RAID.
it still wouldn't boot to windows - giving some message about not having access to the drive. i tried using the windows install disk but that gives error messages about RECENV utility not working, use chkdsk. it does show a drive as a volume D: (not C: interestingly) I have tried running repair and that doesn't work. I have tried chkdsk/r and that didn't help. In fact that degraded the Raid so i had to rebuild it, and now that is running Normal.
I also can't see any of my restores when i use the install disk.
I don't want to do a reformat and start again as there is data on there that is newer than my last backup.
So the options i am considering
1. remove the disks - place one of them in an external usb case and try to extract the data to save it - not sure if this is possible? and then do a clean install or try the below.
2. can i go back to the previous bios version? is that just a case of power off everything and remove the CMOS battery? and power back on?
3. go through with a new install of win 7 but don't format the drive and see if it just corrects any bad files.
can i download free audio driver for my pc
View 2 Replies View RelatedI am choosing which OS to boot by changing the boot order in my BIOS. To me, this seems clean and simple. I built 32 bit XP on one disk, then removed that disk from my system, installed a different disk, and built 64 bit Windows 7.
When both disks are installed, I change the boot order to select the OS I want, and each OS sees and can use the files on either disk.
Am I asking for trouble here, or is this as clean as I think it is? What I want is one set of user document files which can be used from whichever OS has been booted.
I want to ask how can i use uefi ? my computer specs are:-Intel i5-2500kIntel DH67BL8 GB Ram250GB Seagate i have a windows x64 usb as well.
View 7 Replies View RelatedI'm still trying to get a hang of how UEFI works. I did take a look at it when I went to install my OS (And again when i got a SSD), but I couldn't make heads or tails of it and used BIOS.
does UEFI make a drastic difference over BIOS, and can I convert without having to do a complete wipe and install? or how would go about switching to EFI, or is it worth it?
I've Lenovo G570 I want to know that I can install Windows 7 in UEFI on my laptop or not? I didn't see any UEFI option in my BIOS menu, the specs are:
Lenovo G570,
Intel Core i5-2430M 2.4Ghz
4GB DDR3 SDRAM
Intel HD Graphics 3000
this has been dealt with in various places but not to my total satisfaction. So bear with me if the answer is hidden somewhere in the forum.I've got an oem asus with 2 hdds the first of which has Win 7 64 home pre-installed via uefi boot manager. It is a gpt formatted disk. The second disk is empty and is set up with mbr. I wish to dual boot onto the second disk with Win 7 32 Pro but fear a rejection due to the fact appparenly Uefi will not manage 32 bit installs/boots. More to the point , will the mbr variance on the 2nd disk somehow make for an exception to this 32bit 'prejudice' on the part of uefi or simply make matters worse? My bios has a single option regarding a legacy setting connected with uefi which is disabled. PxO.or rather. Gregrocker seems to think obviating the problem with 2 physically separate installs (i.e. Hdd disconnect) will allow a Bios based boot as opposed to a Uefi/Windows managed one. Is this workaround a sure thing and my only option or is there a practical way to go the classic route with the auto boot loader screen on start up? Perhaps a better way to put it is..on dual boot systems is it true that you can't have BOTH uefi and the bios directing the show. You gotta choose one or the other. Frankly, to my novice mind this whole problem seems to be a regression from the XP days.
View 9 Replies View RelatedI am installing Windows on my new SSD. I made the disk GPT (instead of MBR), and installed Windows (tried 5 times now) with similar results. Either error 0xc0000225 or boot loop of "Windows is loading files" ... or it throws me back to my BIOS Boot selection screen where I came from ... what might be the problem? Windows 7 still cant handle GPT partitions? Or it doesnt like the new SSD? I managed to install and reboot successfully once by removing all other drives (except the SSD which I am installing into), works, I can enter Windows. Then once I installed back the other HDDs, it fails again ...
View 4 Replies View RelatedSince UEFI exists, some people talk about BIOS replacement by UEFI in short-term (2011 for exemple) (see "News").Who never has problem with BIOS bugs ? I must fight against several problems on one of my mobos because of its incorrect BIOS code, essentially for long time boot BIOS and very buggy S3 sleep mode.However, when I read many posts about people who have installed their Windows 7 x64 in UEFI mode, I'm afraid of some new problems that UEFI causes, according to these people, even during a Windows session, even if installation was fine.I would like to know your experience about UEFI, on motherboards which support it (my motherboard is an Intel DG45ID which proposes UEFI boot).
View 2 Replies View Related915 motherboard intel support chipset motherboard sound, vga, usb drivers download
View 1 Replies View RelatedHave the UEFI Option in the boot menu of the ASUS K42F notebook. Regrettably, boot to USB is not an apparent option. Have emailed Asus support and the reply demonstrated no knowledge of the feature. There is an option that allows the entry of "command line" entries. The setup utilities are from American Megatrends (AMI).
View 2 Replies View Related
