Find Firmware For Lenovo SL500?
Jul 21, 2011i want to find firmware for lenovo SL500
View 2 Replies
ADVERTISEMENT
Display Flickering Lenovo SL500 Windows 7
Dec 4, 2011I have updated my laptop Lenovo SL500 to windows7, and now I am facing an issue like whenever I use one more programs opened and at them same time, the display starts flickering unless those windows are not minimized, there is no problem if only one window at the screen.
View 9 Replies View RelatedDisplay Flickering Lenovo SL500-Windows 7?
Mar 18, 2012Recently I have updated my laptop Lenovo SL500 to windows7, and now I am facing an issue like whenever I use one more programs opened and at them same time, the display starts flickering unless those windows are not minimized, there is no problem if only one window at the screen.
View 1 Replies View RelatedCannot Find Firmware Update For MATSHITA DVDRWBD UJ-110
Mar 27, 2012Can anybody find the firmware update for MATSHITA DVDRWBD UJ-110?
View 4 Replies View RelatedTrying To Find Latest Drivers / Firmware For USB 3.0 Card
Jan 15, 2013I have Windows 7 Ultimate 64-bit. The original installation went just fine, but I never did test to see if transfer speeds were any faster. The instructions specifically mention to install the software first, then the hardware. Recently, I did a clean reinstall of Windows 7 Ultimate (x64). I never did remove the card. I tried running the software with the hardware already installed. Well, the drives are recognized and all, but the transfer rate between the two drives (one is Seagate 3.0 and one is WD 3.0) is only around 50 MB/sec...USB 2.0 speed, right? So, from what I've been able to find over the past couple of hours is that I can't contact WD about the card. They know nothing, and the product can't be found on their website. In device manager, it's listed as NEC Electronics, and it seems there's been some combination of forces between NEC Electronics and Renesas.
1. I have found updated drivers and firmware for NEC/Renesas USB 3.0 cards, but they are broken down into different models or families. For instance, most of them use a number along the lines of uPD720200/uPD720200A Version 2.1.27 WHQL uPD720201/uPD720202 Version 3.0.8.0 WHQL So, how do I find out what my uPD number is, so that I grab the right files?
2. Do I need to uninstall current drivers/software, remove the card from my PC, install the correct drivers, and then install the card back into my machine (See bit about installation instructions near beginning of post.) OR can I just find the updates and install them without removing the card? If so, do I uninstall the old drivers, or just install the new drivers and firmware over the top of the existing files?
Find The Driver For Lenovo T60 Video Display?
Dec 19, 2011find the driver for my lenovo t60 video display
View 1 Replies View RelatedHow To Find Lenovo Laptop Camera Software
May 16, 2012how to find lenovo laptop camera software
View 1 Replies View RelatedCan't Install Windows 7 In Notebook Lenovo Lenovo Z475-1309
Nov 20, 2011When trying to install W7 in 64-bit form I get the error message "The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks."
this is new purchased notebook and i can't install the windows 7 anywehere in the driver
Firmware Necessary Before Installing OS On SSD?
Feb 28, 2012I just got a new Dell XPS 8300. I will be placing a Crucial M4 ssd in it to be my main drive. I've been reading up on what to do, and my main concern so far is the firmware update. It sounds slightly more complicated than I'd like, and I am trying to decide if it's definitely something I need to do before installing Windows7 on the ssd.
Would I be a fool to just install it as-is, with whatever firmware comes on the drive?
I will be installing Windows7 Home Premium on it, but then will be paying for the upgrade to unlock it to Professional.
SSD Firmware Download Failed
Jun 14, 2012Just received a new OCZ Agility 3 SSD and are having some issues. I've installed the drive and formatted it, I have also tried to update to firmware on it countless times all of which have resulted in 'Firmware Download Failed'. The drives also seems to be disappearing occasionally and requires a restart before it appears again. I want to update the firmware before I clone my old HDD to it.
View 1 Replies View RelatedFirmware Update For Modem?
Sep 28, 2011I know this might not be the place for this question but i have just downloaded a Firmware update for me modem but the files came in .rom and . bin and i am unfamiliar with these files how do i open them or with what do i open them with???
View 2 Replies View RelatedCan't Update Firmware On ADATA S510 SSD
Mar 26, 2012I have an ADATA S510 120gig SSD, i tried downloading the Firmware upgrade tool seen on this page S510 SATA 6Gb/s Solid State Drive, Download, S510, 500 Series, Solid State Drive, Welcome to ADATA
I opened the tool and it didnt find my SSD drive. I then downloaded the file itself to try and manually install it but it is a "VIC" file, i dont even know how to open it.
Does anyone have experience with updating their firmware on these SSD drives?
edit: after digging around on my machine i found that i have firmware 3.3.2 which is apparently the latest firmware out there right now (i didnt know that till i just found this info out, this machine is 2 weeks old)
Matshita DVD RAM UJ-850S ATA Firmware Error?
Sep 30, 2010I can watch DVD's but get a firmware error when trying to burn CD's thru windows explorer.I use windows 7(32 bit) OS.
View 2 Replies View RelatedHAL Gigabyte Firmware Has Corrupted Memory
Feb 28, 2010I was wondering if anyone might be able to address this: I'm getting a HAL error in my win7 event viewer log -- event i.d. = 12...description reads " platform firmware has corrupted memory across the previous system power transition.
It always throws the error up when going in or out of sleep mode in windows 7 x64
Install The Razer Deathadder Drivers + Firmware
Dec 6, 2010I am getting a Razer Deathadder 3500 DPI Gaming Mouse for Christmas from amazon.com. I am really excited about it but heard it had driver and firmware issues that could totally break the mouse. What should I do when I receive the mouse? Should I use the CD Drivers, plug in the mouse and then update them from razerzone.com? Should I install the drivers, plug in the mouse, then install the firmware? Should I install the CD, plug in the mouse then install the drivers and firmware from razerzone? I have heard that you should install the drivers and then the firmware. DON'T Want this mouse to break the first day. Oh and I don't even know if it comes with a CD
View 5 Replies View RelatedUpgrade Router Firmware To Support New Ip6 Protocol?
May 10, 2011Should I upgrade the firmware of my netgear wndr3700 router so it will now support ip6 protocol instead of ip4. The update in in netgears website. The support for my router has expires so I would need to pay for support if there any problems.The netgear wndr3700 works perfectly right now with my computer and wireless blue ray player..
View 1 Replies View RelatedMatshita Mk5059gsx Ata Drive Firmware In Windows 7
Jul 16, 2011this dvd rom won't burn... my brother said the firmware should be update since it is in windows 7 os... where do I get it?
View 1 Replies View RelatedUEFI: Universal Extensible Firmware Interface Query?
Nov 14, 2012Have the UEFI Option in the boot menu of the ASUS K42F notebook. Regrettably, boot to USB is not an apparent option. Have emailed Asus support and the reply demonstrated no knowledge of the feature. There is an option that allows the entry of "command line" entries. The setup utilities are from American Megatrends (AMI).
View 2 Replies View RelatedCrucial M4 Drive Freezing After 000F Firmware Update?
Sep 14, 2012I've spent my whole day trying to figure out what is going on with this to no avail What I've Done:Installed Windows 7 ultimate 64-bit OS on Crucial M4 drive that was acting up and freezing Continued freezing after installing drivers, stable for 10-30mins then freeze, requires hard reset every time updated FW to 000F as recommended, same deal swapped ports with platter drive, same deal took drive in to where I bought it from, they said all stress tests etc went fine Pretty much at my wits end. I'm fairly convinced its nothing else since I am running on the seperate mechanical drive fine.
Specs as follows:
Acer Aspire 8943G-5636
Intel Core i3-350M processor @ 2.26GHz, 3MB L3 cache
ATI Mobility Radeon HD 5650
8GB memory
500GB Western Digital mechanical HDD
128GB Crucial M4 SSD
Windows Failed To Load Because Firmware Is Not ACPI Compatible
Jul 20, 2009I had installed Seven on my Dell Dimension 4400 everything was all right and I was working successfully with that operating system but I had to upgrade my BIOS and after that it shows me error when I try to start system: 0xc0000225 (Windows failed to load because the firmware [bios] is not ACPI compatible). The same when I want to re-install Seven.. "Windows is loading files" and then I can see the menu when the problem is presented that I should choose repair system etc.. but it always ends with the same effect.I can do nothing.As I wrote above I wanted to upgrade bios but I stayed with the same version because of many reasons so I made upgrade but nothing has really changed. What's more, I'm sure that Seven may work on my machine - I used it!There's a map of my Bios: Documentation Shall you check what should I change?
View 9 Replies View RelatedRestore Original Firmware WRT54GL Wireless-G Router?
Aug 21, 2011Current My Firmware Is DD-WRT v24 std But.. Now I Need Restore to Original Router Firmware
View 3 Replies View RelatedSony Firmware Parser Driver Needed For VGN-FZ11Z Windows 7 32bit?
May 6, 2012I need a firmware parser driver (i guess its other name is human computer interface if im not wrong). Specs are as under
SONY VAIO VGN-FZ11Z
Windows 7 PRO 32bit
PC Doesn't Hibernate / Locks Instead - Standby State Not Supported By System Firmware
Mar 28, 2010For some reason, every time I try to hibernate my PC (start -> hibernate), it locks itself instead and goes brings me straight to the login screen. This problem has only occurred recently and I haven't had problems with this before. The command line "shutdown /h" does the same thing and results in "The system cannot find the file specified. (2)".
"powercfg -a" results in:
The following sleep states are available on this system: Standby < S1, S3 > Hibernate Hybrid Sleep
The following sleep states are not available on this system:
Standby < S2 >
The system firmware does not support this standby state.
My specs are:
Windows 7 Ultimate 64bit
Intel core i7 CPU
6gb RAM
Radeon 5770 graphics
I'm running dual boot with windows XP on another partition as well. My windows 7 partition is active and system but the windows XP partition is boot.
Flashing BIOS Firmware Update Has Lost Windows 7 Boot Record?
Nov 30, 2012I wanted to install more RAM, but Supermicro support told me I needed to update BIOS (flash it) to enable it to accept higher RAM.After I did this, the BIOS seems to have lost the record that boots my Windows 7 installation. After going through the checks, it just comes up with "Operating System not found."So I thought that, since I have two SATA drives, I could try installing Windows on my redundant disk to see if that might generate a dual boot menu.I was able to successfully install a fresh copy of Windows on the 2nd disk, but it will only boot into that one. It seems my system has completely forgotten about my other, working, installation.Is there a process for recovering the boot information and setting it up such that I can go back to using my other installation?
View 2 Replies View RelatedHow To Find Find Locker Made Invisible Using Folder Protect
Apr 5, 20121.I had created a locker on my desktop using "Folder Lock" software.
2.Subsequently I made the locker invisible using "Folder Protect" software.
3.When I was trying to add more files to the locker created in 1 the locker tried to "increase it's size on the run"...
4.This process failed and "Folder Lock" shut down and since then I cannot locate the locker anymore on my PC nor can I see it in "Folder Protect"
5.Having read on a forum, I uninstalled "Folder Protect" and reinstalled...but that did not help..I still could not find the Locker.
6.I even uninstalled and reinstalled "Folder Lock"...even this did not help
7.I understand the lockers created by "Folder Lock" are UNDELETABLE.
8.Clearly my locker is somewhere on my hard disk but I am unable to locate it.
IBM Lenovo T61
Aug 14, 2009i am having IBM lenovo T61 laptop, i have installed windows 7 build 7100 in it.
But i have a problem of system hangs for about 10 or more minutes, during that time i can only move my mouse pointer and no other program can be done.
I thought i have problem with my hardware. I then tried with vista it works very well.
So guys i want to know can i install windows 7 or not on my laptop? or is there any way to cross over this problem? please help me. And the thing is i want to upgrade my self to windows 7.
Lenovo T61
Jan 4, 2010I cant get the software to read the fingerprint sensor. I used the New windows 7 x64 bit drivers but still no luck. The message that is being returned by the program is "
Does anyone have any suggestion's. I have gone in the device manager and looked at all of the units and they say that the biometric driver is working fine. Could it be a bad install and just try it again?
Windows 7 64-bit
Lenovo T61
Lenovo Netbook S10
Dec 25, 2009i recently ordered the lenovo ideaPad netbook s10 and should be getting it soon, it comes with xp, so i purchased a windows 7 upgrade from win741. for $32.00. they link you to a download .iso and .exe. i downloaded both files and have a product key.
so the question is how should i go about upgrading? do i just copy the .exe file on my desktop? i take it that the .iso needs to be burned to disk and installed by disk drive, but not available with my netbook.
Lenovo X61 Problem
May 17, 2009I have installed windows 7 on a Lenovo X61. The problem I am having is that the wired network fails to connect on startup. Running the network and sharing center (apparently disabling and enabling the wired adapter) eventually resolves the connection, but it takes a few minutes. Any ideas?
View 1 Replies View RelatedLenovo Laptop Freezing Up?
Feb 21, 2011My Lenovo X61S [7668-CTO] laptop has been freezing up all month. To my knowledge, I have installed all Lenovo and Windows updates--including Windows 7 SP-1 today. Error messages below. They are all BCCode 124, whatever that means. TSG SysInfo follows. What to do?Tech Support Guy System Info Utility version 1.0.0.1.OS Version: Microsoft Windows 7 Professional , Service Pack 1, v.721, 32 bit Processor: Intel(R) Core(TM)2 Duo CPU L7700 @ 1.80GHz, x64 Family 6 Model 15 Stepping 11
[Code]....
Lenovo Laptop Will Not Boot
Jun 11, 2012Lenovo laptop with Windows 7 OS. The laptop shut down while plugged in overnight. I have removed the battery and let it sit for hours to cool/reset. Upon power up, the hard drive light comes on for 2-3 seconds, then goes off. Sometimes the screen flickers white for another 2-3 seconds, but the OS never boots up. I have removed the hard drive and plugged it into another computer via a SATA cable. I was able to read data. The drive appears to be working. I ran Malware Bytes and it cleared off some suspect files (PUP.FunWebProducts and PUP.MyWebSearch). I have a log file to post if helpful. When I put the hard drive back into the laptop, I get the same result as before. I made a recovery disc on another Win 7 computer and attempted to boot the Lenovo from the disc, but still I get the same result. I have tried pressing F8 at start up, but still no joy. Is this a BIOS issue, failed HD controller, or something else?
View 6 Replies View Related