PC Doesn't Hibernate / Locks Instead - Standby State Not Supported By System Firmware
Mar 28, 2010
For some reason, every time I try to hibernate my PC (start -> hibernate), it locks itself instead and goes brings me straight to the login screen. This problem has only occurred recently and I haven't had problems with this before. The command line "shutdown /h" does the same thing and results in "The system cannot find the file specified. (2)".
"powercfg -a" results in:
The following sleep states are available on this system: Standby < S1, S3 > Hibernate Hybrid Sleep
The following sleep states are not available on this system:
Standby < S2 >
The system firmware does not support this standby state.
My specs are:
Windows 7 Ultimate 64bit
Intel core i7 CPU
6gb RAM
Radeon 5770 graphics
I'm running dual boot with windows XP on another partition as well. My windows 7 partition is active and system but the windows XP partition is boot.
I have windows 7 Home Premium and I am facing some problems with Hibernate and Standby. The first Problem is that my system doesn't hibernate but instead it just perform a log off. The second problem is that when I put the system in standby, it wakes up automatically after 2 to 3 hours which makes a serious problem if my laptop is in the bag.
I had my laptop for about 5 months running OEM Win 7 home premium 32bit. The system came with no disks so I am stuck, for now, with the copy loaded. Anyway, things had been running smoothly up to a few weeks ago, for when I tried to put my system into hibernate, like I've done many times before, the screen went black, but the system did not power-down. I could not do anything but power-cycle it. When it came back I got the "Windows failed to shutdown properly blah blah blah" message. I tried 'sleep' and the same thing happened. I don't do much in the way of adding or removing programs on this laptop, aside from updates and the only recent hardware change was using a usb mouse. Which I have tried removing this and there was no change. I have tried updating drivers that needed it (video, audio, and network) as well as the BIOS. No luck.
My computer is several years old, and just a few weeks ago started having a problem waking from standby. Up until now, it had no issues going into and coming out of sleep.Now, whenever it goes to sleep (whether due to inactivity or putting it to sleep manually), it won't wake up. The lights come on, the fans come on, but the monitor stays in standby. I've looked around online and found that many people get a black screen when booting up, i.e. the monitor comes alive and they may get a mouse cursor, but that's not what's happening to me. I don't get a black screen--my screen is never getting a signal from the computer. I have to do a hard reset, after which I get the 'Start Windows Normally' screen.I've tried uninstalling and reinstalling the graphics drivers, changing hybrid sleep settings, using hibernate instead of standby, uninstalling random programs, etc, to no effect. I don't think I had any major windows or driver updates that caused it.
whenever i put my dell latitude into standby or hibernate it seems to be okay. but when i bring it out of hibernation or standby it turns on again and tells me that there was a blue-screen and starts the PC like it was turned off via a normal shut down.i've got all the windows updates installed.
whenever I click on "Hibernate" from the start menu, my computer goes on standby. Also my computer usually has the uncanny ability to Hibernate when its battery gets critical. Now it just goes on standby, and I lose my work.
the windows 7 welcome screen spinner isn't animating when I boot my computer or the shutdown spinner animation i have tried going into safe mode to see if that would fix it but no luck, I also tried sfc.exe.
PC specs Operating System Microsoft Windows 7 Home Premium 64-bit SP1 CPU AMD FX-8120 Zambezi 32nm Technology RAM 8.00 GB Dual-Channel DDR3 @ 799MHz (11-11-11-28)
I went to sleep last night with the computer on (Windows 7 7077) like always and this morning it's still on but none of the usb devices are working, monitor doesn't come back from sleep state but the fans on all the components are still spinning. I tried hard rebooting 3-4 times and still nothing. I let it sit and cool off for a bit and still nothing. Anyone know what the problem could be?
I was thinking it was the motherboard but then wouldn't the ethernet light be off if the board wasn't working? The only thing on the computer the has been overclocked is the CPU which I took from 3.0ghz to 3.8ghz and it's been running fine on the stock cooler for the past 6 months almost and then bam it's like this. I don't think it could of been over heating as the temps usually run 30C at idle and 50-60C at full load and the side is off of it.
I followed it thoroughly and unfortunately I still have no hiberfil.sys file. The system locks, the screen goes into energy saving mode, but Windows doesn't hibernate. It all began when I upgraded Ubuntu (have a dual-boot), made a clean install of the 12.04 version, seemed to get all partitions encrypted, then messed up the grub, and finally I had a hard time assigning auto-mount and read-write privileges to all of them.Ubuntu seems fine now, and Windows sleeps but can't hibernate (or allow the hybrid sleep).Windows' partition is listed as "boot", I disabled the option of auto-mount for Ubuntu, but it still doesn't work.
I am having a serious problem with sleep mode in WIN7. Whenever I put the PC in sleep mode, it will come back on when I hit ESC or move the mouse, but the monitor never comes back on and the PC is crashed. I can't do anything other than cut the power to get it to shut off. My bios is only the same version that came on the CD that came with the board. In the directions, it stated not to update the bios if I am not having problems, and up until I went to try to put it in sleep mode today everything has been running perfect. I have also not updated my ATI Catalyst software either, just still running the same stuff that came on the CD with the GPU.
I guess I figure why mess with success if all was well. My memory shows to be running at 1600 with the voltage at 1.65. I've done a bit of research on the topic, but there's lots of varied opinions on other forums I've seen. This symptom is very problematic and I am nervous about keeping on causing it to occur if I can't get a good handle on what to do first - when it did this I had to try rebooting twice for my machine to finally come alive again (the first reboot was unsuccessful and the monitor never responded similar to the first crash).
My build: Intel i5 2500k CPU Asus P8P67 REV 3.0 mobo XFX Radeon 6850 GPU CORSAIR XMS3 4GB (2 x 2GB) SDRAM DDR3 1600 Antec 750W PSU Antec 902 case Corsair CPU cooler Western Digital Sata-6 1TB HDD LG Bluray burner Win7 Home Premium 64 bit
My laptop is an MSI Gx660, running windows 7 64bit with 12gb ram.The laptop is only 1-2months old and My harddisk has very little files with about 205gb free on the C drive.
After using for a long period of time like 6-7hours, I would usually put my laptop into hibernate mode.When I click hibernate, the screen turns black but even after 20mins the power button including wifi and other lights doesnt go off, which I have to force shutdown by holding the power button. Even sleeping the laptop after 6-7hours does the same issue, unable to go to sleep(indicated by the blinking power button)
The wierd thing is that if I use the laptop for about 2 hours or less, I am able to fully hibernate or sleep, which I tested a few times.
When I run the command: powercfg -requestsI notice there is a SERVICE named CryptSvc preventing my laptop from going to standby. I have looked up on how to disable it using OVERRIDE command to no avail.If anyone have experience on this, please advise.Here is a screenshot of the problem.URl.
I accidently managed to delete all files in my c:/users directory and now my system won't go into standby or hibernate mode. It just shows a blank screen when I choose either or these but the PC never hibernates or sleeps and the only way to get it out of this state is a hard shutdown. I deleted all Files/Folders except my own user folder.
Windows 7 home premium, 64-bit HP Envy 3D laptop with 8GB memory, no custom hardware
I have configured a backup job which wakes up the laptop at midnight, takes a backup and puts laptop into standby again. All this happens with the laptop lid closed. The power scheme is configured to put laptop into standby when lid is closed.
The resume from standby, backup and suspend after backup is controlled by Windows Home Server (2003) console which is installed on the laptop. I had purchased the HP laptop in October of last year and this job used to work just fine. Sometime in March of this year, the backup stopped working.
After checking the logs and physically observing the laptop at midnight, I found that the laptop resumes from standby at the scheduled time but immediately goes into standby if the lid is closed. The backup fails. Windows event logs indicate that laptop lid close action is putting system into standby.
If the lid is open, then the laptop resumes from standby, stays awake, backup proceeds and laptop goes into standby again.
Here are my problems:
a) Why did the backup work for several months and then stopped working?
b) I have other laptops in the house running Windows 7 home premium on variety of hardware (all HP) and they do not have any issue. Even with the lid closed, they resume from standby, do a backup and go into standby again. The power scheme on all these laptops is set to put laptop into standby when lid is closed. I have verified from physically observing the laptops during backup time.
I have checked all the usual suspects like BIOS updates, driver updates, run sfc, completely deleted the Windows Home Server console from laptop and re-installed after deleting all past backups. Is there some setting that I have overlooked?
For the last couple of nights, there has been an update to apply when I log off. In both cases, the update seemed to hang and I left the computer switched on overnight with the monitor switched off.On the first occasion it was still hung in the morning so I reset the computer. All seemed to be OK during the day but when I came to close down there was an update to apply. I guess it was the same one. It hung again and I left the computer overnight again. This time it had switched off but when I switched it on again it came up with a temporary profile.A message appeared telling me to look in the event viewer but that is a waste of time as there are several hundred million entries which don't mean anything to me.Where do I go from here? I guess I can do a system restore but that is likely to lead me back here after a day or two as the system tries to keep itself up to date.
my computer has been experiencing frequent bsod events mostly during gaming but often while streaming video as well. I recently installed several new components in my pc including a new mobo, ram, and an hdd. The system's memory was tested, the bios have been updated, and the display drivers have been wiped and updated.Nevertheless, I've received the following error messages:[CODE]
i have Windows 7 (64) preinstalled on an Acer Aspire notebook. I've been looking high and low for a way to backup just my system state, the way I used to be able do in Windows XP. There was even a guided tutorial to help you do it on the MS web site. The resultant file was much smaller than a partition backup and was often more useful for disaster recovery than the simple restore point recovery. It only took a few minutes to create. It seems NTBackup is gone. Is there any way to do what ntbackup used to do?
Periodically, lately it's at least daily, my mouse cursor freezes and the computer becomes unresponsive requiring cold boot. This sometimes happens even before I log on if I boot up and don't log on then come back later, the mouse may be frozen. It also happens while in idle and screen saver is running. I was running in Safe Mode w/ Networking today and it also happened. The mouse I was using was a MS Wireless Mouse 5000.
That one would just freeze. I accidentally destroyed it and am now using a MS Wireless ARC mouse instead. The only difference I notice is that the ARC mouse will occasionally pause the cursor in a spot for a second or two and then continue. However, it also will eventually freeze and lock system. Not sure how to identify where the problem is. I've updated the NVIDIA driver recently to the latest one.
I have a problem with the driver "XFXA_PCDRV_LB_1_04_0000" or "SBXF_PCDRV_LB_2_18_0015" and when I try to install it, I got the error "impossible to detect a supported product from the system".
This is the hardware ID: PCIVEN_1102&DEV_0001&SUBSYS_00201102&REV_00 PCIVEN_1102&DEV_0001&SUBSYS_00201102 PCIVEN_1102&DEV_0001&CC_040100 PCIVEN_1102&DEV_0001&CC_0401
I'm just wondering if this is something abnormal. I keep my system up 24/7 just shutting off display without putting it to sleep/hibernate. Every morning when I wake up and check the kernel memory, it's quite high >500mb. I checked with a friend and his is onli about ~300. What does this mean, a memory leak?
i wanna divide the 'C' ,i used the "New simple volume wizard " after pressing finish i got the msg The operation you selected will convert the selected basic disk to dynamic disk. if you convert the disk t dynamic , you will not be able to start installed operating systems from any volume on the disk (except the current boot volume). are you sure ? when i press yes i got error msg "Dynamic disk are not supported by this operating system or server configuration . dynamic disk are not supported on clusters.
I just got a new Dell XPS 8300. I will be placing a Crucial M4 ssd in it to be my main drive. I've been reading up on what to do, and my main concern so far is the firmware update. It sounds slightly more complicated than I'd like, and I am trying to decide if it's definitely something I need to do before installing Windows7 on the ssd.
Would I be a fool to just install it as-is, with whatever firmware comes on the drive?
I will be installing Windows7 Home Premium on it, but then will be paying for the upgrade to unlock it to Professional.
Just received a new OCZ Agility 3 SSD and are having some issues. I've installed the drive and formatted it, I have also tried to update to firmware on it countless times all of which have resulted in 'Firmware Download Failed'. The drives also seems to be disappearing occasionally and requires a restart before it appears again. I want to update the firmware before I clone my old HDD to it.
I know this might not be the place for this question but i have just downloaded a Firmware update for me modem but the files came in .rom and . bin and i am unfamiliar with these files how do i open them or with what do i open them with???
I have an ADATA S510 120gig SSD, i tried downloading the Firmware upgrade tool seen on this page S510 SATA 6Gb/s Solid State Drive, Download, S510, 500 Series, Solid State Drive, Welcome to ADATA
I opened the tool and it didnt find my SSD drive. I then downloaded the file itself to try and manually install it but it is a "VIC" file, i dont even know how to open it.
Does anyone have experience with updating their firmware on these SSD drives?
edit: after digging around on my machine i found that i have firmware 3.3.2 which is apparently the latest firmware out there right now (i didnt know that till i just found this info out, this machine is 2 weeks old)
I was wondering if anyone might be able to address this: I'm getting a HAL error in my win7 event viewer log -- event i.d. = 12...description reads " platform firmware has corrupted memory across the previous system power transition.
It always throws the error up when going in or out of sleep mode in windows 7 x64
I am getting a Razer Deathadder 3500 DPI Gaming Mouse for Christmas from amazon.com. I am really excited about it but heard it had driver and firmware issues that could totally break the mouse. What should I do when I receive the mouse? Should I use the CD Drivers, plug in the mouse and then update them from razerzone.com? Should I install the drivers, plug in the mouse, then install the firmware? Should I install the CD, plug in the mouse then install the drivers and firmware from razerzone? I have heard that you should install the drivers and then the firmware. DON'T Want this mouse to break the first day. Oh and I don't even know if it comes with a CD