Network Error 0x80070043
Nov 1, 2009
So after installing windows 7 the other day, everything seemed to be working properly. I was able to access all of my network shares to my file server, and other machines in the house.
Even yesterday this all worked as normal. But now today I am unable to communicate with any other pc in the house. either by pc-name or ip-address. I receive the error 0x80070043: The network name cannot be found.
From a command window, I am able to ping all machines I have tested to, by IP address, and by hostname.
Starting a virtual XP session within Windows 7, I am able to browse to the shares in the XP session.
In the network section, no PCs are visible excluding the local PC. Attempting to browse to the local PC via the network results in the error message "The specified network provider name is invalid".
All PCs are in the workgroup "WORKGROUP"
Browsing around the network via my laptop functions with no issues.
Browsing the the windows 7 PC from other pcs works without issue.
Any suggestions would be incredibly helpful.
View 3 Replies
ADVERTISEMENT
Aug 7, 2009
3 PC's all running Windows 7 Ultimate
1 Desktop connection via wire to router
2 Laptops connected via Wireless (Linksys wrg54g)
All 3 PC's are visible on all 3 PC's via the Homegroup in Windows Explorer. I can browse/copy/write files on all 3. All sweet. All 3 can print to the 2 Printers connected to the Desktop.
Laptop A is configured to Backup using the Windows 7 Backup to the Desktop. This works fine.
Laptop B however when trying to backup to the desktop I get an error message after I have selected the Drive in the setup screen and I've entered my username/password credentials
The error code is 0x80070043
I've tried everything and I'm quite experienced.
Both laptops for all intents and purposes are identical.
View 9 Replies
View Related
Aug 11, 2010
I recently switched out an older Netgear router for the Netgear WNDR3300. I have a 1TB WD MyBookWorld connected via ethernet to the router. Ever since the router switch I have been having two specifice issues:While uploading videos to Facebook, the video will upload anywhere from several MB up to over 100 MB, then stall, saying it's still uploading but trust me, it isn't. I can copy files/folders from the networked hard drive to my computer flawlessly, but when I try to copy files/folders from my computer to the networked hard drive, it copies anywhere from a few seconds to maybe a couple minutes then stalls out, giving the error message: "Network Error. There was a problem accessing [\SERVERFOLDER]... Make sure you are connected to the network and try again." with Retry, Skip and Cancel. When cancel is pressed it gives: "An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred.
Other useful information: on the new router, the WNDR3300, if I use WEP security, I can copy files/folders to the hard drive, no problem. However if I try to use WPA/WPA2, the abovementioned problems occur. I would use WEP and just forget the hassle, but WPA2 is much faster and more secure, so I really want to get this fixed.I also believe the two problems are somehow related, considering they both involve working for a few seconds to a few minutes, then stalling and failing. Could this be somekind of authentication or something to do with WPA/WPA2 that I'm doing wrong?
View 1 Replies
View Related
Sep 1, 2011
I have had my vista pc and my windows 7 (basic) net book setup to let me share files (through an Netgear DG834PN Route) for around 18 months with no problems.
However as of 3 days ago I can no longer do this and non of the network tools can fined or solve the problem. I can uses the internet though my rooter, see my vista pc on the network as well as the media streaming (windows one) thing.
I can also access my net book hard drive from my pc no problem and transfer/delete files as well?
When I do try to connect the following error message is given: "Error code: 0x80070035 The network path was not found"
P.s. I know windows 7 basic has not create home group ability, but it worked with the one I made on vista. I can not afford to upgrade my copy of windows 7 so that is totally out of the question.
View 1 Replies
View Related
Oct 5, 2009
Yesterday I installed the final version of Windows 7 Professional 64-bit (from MSDNAA) on my computer which was previously running Vista Home Premium 32-bit. On Vista, the network worked wonderfully, but once Windows 7 was fully installed, the computer can't even find any networks. I rebooted and ran Windows Vista in safe mode, and, sure enough, the internet was working and everything.
I took a look at the device manager in Vista, and it listed NVIDIA nForce 10/100 Mbps Ethernet and Linksys wireless G PCI adapter under my network adapters. (Oddly, when I run device manager in Windows 7, it only lists NVIDIA nForce Networking Controller under network adapters.)
I thought for sure it was just a driver error, so I merely went on the laptop, downloaded Driver Robot, put it on my computer running Windows 7, ran the export scan, put the result scan on a flash drive, and downloaded the driver for the network adapter that it told me to. Then I put the driver setup on the flash drive, and copy it onto my computer with Windows 7. First, it told me that the file was corrupted, but after many tries, it finally worked. I updated my network adapter drivers.
Unfortunately, I still can't find any networks.
EDIT: I just looked at my device manager in Windows 7 again. Under "Other devices," it lists "Network Controller" with a yellow exclamation point.
View 0 Replies
View Related
Apr 19, 2009
when I turned on my computer this morning the computer didn't start the antivirus program, and I can got to system repair, I cant start Computer management I get an error message
The Error message says.
"Network Error
Windows cannot access C:Windowssystem32compmgmt.msc
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
View 7 Replies
View Related
Nov 26, 2012
In a network with 10 computers, the PC-2 can access everyone but the PC-5. All other computers can access each other and PC-5 can also access everyone else.
Where is the bug? The PC-2 has the bug right? Why is it only one PC that the PC-2 cannot access?
Basic routines are checked I think: All running windows 7 All having same network sharing settings, Network discovery ON (both home and public) File sharing ON (both home and public) Public folder sharing ON (both home and public) Password OFF (both home and public)
Error message say: "Check the spelling of the name." (?!?!)
View 2 Replies
View Related
Jan 1, 2010
I have a small home network connecting 2 PC's and a NAS drive. The network is hard wired using CAT 5 and there is also a wireless AP for the Wii console. When both PC's used XP either could access (read and write) to the NAS which is mainly used to store digital photos. Since upgrading one PC to Windows 7 I cannot access the NAS from this PC.
I can see the drive and can logon via web brwoser to conduct maintenance but cannot read or write using Windows Explorer. I always get the Netwrok Error 1208 statement. I suspect it is to do with new security protocols in Windows 7 not talking to older Samba software. Could someone offer some help please ?
View 3 Replies
View Related
May 23, 2011
how can i fix the network eror(tcp_eror)
View 1 Replies
View Related
Apr 21, 2011
Getting an error when trying to connect to a network drive 'An error occured while re-connecting.No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept'Now this has been setup with a local folder on the server shared and is being mapped to 19 people on the network.I looked under advanced permissions and can see max allowed connections set to 20, there are 19 people in the company but the problem lies that some bring in their laptops and attempt to connect to to the existing shares as well which is obviously causing problems as I can only allow max '20' connections to this mapped folder.Is there any fix that will allow Win 7 Pro x64 I can enter in the registry to allow more connections?
OS:Running Win 7 Pro x64
View 4 Replies
View Related
Dec 4, 2009
while trying to update network adapter drivers on my gf's pc i had an error.
now i cant get it online.
ive tried using asus latest driver but it fails.
ive also tried a few older drivers.
but says not compatable with win 7
if i do a win 7 repair. will it reinstall the network adapter.
or do i need to do a full format?
View 4 Replies
View Related
Oct 22, 2010
I am new to Windows 7, and am unable as yet to get my documents to print from any program. I have installed multiple printers (different manufacturers) in an attempt to find something compatible, but I believe my problem to be tied to the network.
I am running Windows 7 64 bit, with Office 2007. I have installed a Xerox Phaser 6360 DN printer via the network at work. The printer is connected, as I can open the properties and see that the yellow toner is low. Newest/compatible driver from Xerox website is installed; yet whenever I send a document (or test page) to the printer, in the status window after a few minutes the status changes from "Printing" to "Error - Printing".
View 5 Replies
View Related
Apr 21, 2011
Getting an error when trying to connect to a network drive 'An error occured while re-connecting.No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept'Now this has been setup with a local folder on the server shared and is being mapped to 20 people on the network.I looked under advanced permissions and can see max allowed connections set to 20, there are 19 people in the company but the problem lies that some bring in their laptops and attempt to connect to to the existing shares as well which is obviously causing problems as I can only allow max '20' connections to this mapped folder.
View 8 Replies
View Related
Oct 3, 2011
I was planning on doing some college work during the weekend, but when I went to switch my laptop on it wouldn't connect to my hub. I have Windows 7 and my network connection symbol in the bottom right corner had a yellow star over it saying there wasn't limited access and the connection was unsuccessful. After restarting my hub and laptop, then trying a neighbours hub it was still unsuccessful. I have used the troubleshoot settings and the response says I have either a problem with the driver for the Wireless Network Connection adapter, or the Local Area Connection adapter. I am unsure on what this means and how to fix it
View 2 Replies
View Related
Dec 26, 2011
a friend of mine is trying to access files residing on a vista pc residing on the same network as his 7 pc in order to copy them over. cunningly, both pcs have exactly the same network name albeit one in capitals and one in lowercase although i am pretty sure this does not mkae a difference. can anyone tell if this is where the problem lies, especially since another vista pc on the network shows up fine
View 1 Replies
View Related
May 25, 2012
just built my computer and when I tried to connect it to the internet through an ethernet cable it created a broadband network connection. Then when I try to connect it tells me the modem had encountered a problem it's error 651 and I can't connect to
View 1 Replies
View Related
Jul 1, 2012
i am using windows 7 on dell latitude d620, when i share Internet via mobile htc wildfire android 2.3 version , so sometime it is network connected .but most of time showing error unidentified network & net is not work.
View 1 Replies
View Related
Sep 27, 2012
I have a small problem at work with my new printer. I have 11 computers in a classroom, the printer is connected to the teacher's computer (mine, named DELL00). However, I am unable to add the printer on any other computer in classroom, usually with error 0x00000002
All computers have admin account named Teacher, and all except the Teacher's computer have one standard account named Student. Adding the printer on admin account went without single problem on every computer, but the pinter does not show on the Student account. When I try to add the printer from Student account, I get error 0x00000002
I am adding the printer through Devices & Printers -> Add Printer -> Network Printer -> Not in list -> \DELL00LaserJet-P1102. This method worked on the admin account without problem,s but not on the student account.
View 3 Replies
View Related
Nov 4, 2009
I have a home network with 4 computers; 3 wireless, 1 Ethernet. When they were all XP, things were working fine. Now 2 of the wireless systems have been upgraded to Windows 7 with the "family Pack" retail upgrade.
I believe I have made all the proper permissions and security policies, but this is not working. The Windows 7 system can access the XP system folders. but the XP systems can see the Windows 7 system but get an access violation error.
I've tried some of the suggestions in other thread, no joy. I turned off the McAfee firewall, but that doesn't help.
XP doesn't know anything about "Homegroups" I have a work group name and its set on all systems,
What am I missing?
View 4 Replies
View Related
Dec 10, 2009
my new laptop is less than a week old.
hp dv6-2044ca.
and I've been trying to configure a home network with the workgroup, WORKGROUP
i need to share files between a XP Desktop and a Laptop that has Windows 7.
i have followed a lot of guides and tips by now but i cannot get it to work!
on my laptop, it recognizes the XP computer, but fails to open it
it says i have the naming wrong, yet i know it is correct.
diagnose doesn't help and Pinging the ip address says request timed out 4 times, thne something about 100% packet loss.
on the xp computer side, it recognizes my laptop and can access files
as for network settings, it should be all correct cause i followed this guide that i found on a post by a Microsoft worker (i think).
i just cannot figure out what is wrong.
and the error is 0x80070035
my purpose for this is to access Desktop and the printer connected to it
as well as the shared documents folder,..
View 9 Replies
View Related
Dec 30, 2009
When I select network I can see the other computers on the nework but when I click on any of them but my own I get an error " Check the spelling of the name. Otherwise, there might be problem with your network Error code 0x80070035 the network path not found" The computer is seeing them but says the path name is wrong. The others are vista machines and they all can see and access this machine. Any help would be great also I have no problem accessing the internet only the local computers I can't access.
View 9 Replies
View Related
Oct 13, 2011
I'm running Windows 7 64bit and have tried several times to install iTunes 10.5, both over iTunes 10.4 and separately. Everytime I get the error message - "a network error occurred while attempting to read from the file:C:|windowsinstallerapplesoftwareupdate.msi".
View 4 Replies
View Related
Mar 22, 2009
I have been using Windows 7 beta (386) with no problems up until a few days ago.I've run into the The Network Adaptor "Local Area Connection" does not have a valid IP Configuration message. When I go to Network Sharing I see that I am connected to an Unidentified Network but unable to connect to the internet. This has happened all of a sudden.
View 9 Replies
View Related
Nov 25, 2011
i use the standard win7 wi-fi connection manager. when i launch the system, the wi-fi card gets connected to the router and i can browse the internet. however, the icon of the manager shows the signal strength bars with a blue circle (the circle that indicates loading sth everywhere else in windows) which usually tells me that it is still connecting to the network. the circle doesn't spin, it's just stuck. clicking on the icon doesn't bring up the available network list, so it just doesn't respond.also, the system cannot play sounds. well, it surely cannot play sound from the internet, like grooveshark or Internet. music on grooveshark doesn't even start, Internet videos go silent. actually i haven't tested if it cannot play sth e.g. from itunes, but one time when i wanted to restart the computer short after startup, it showed that explorer is not responding, with the task "playing the log out tune" currently being performed, so maybe the same thing with "offline" sounds...then, after some time (usually it's 10-20 minutes after the i turn on the computer) a notification window is shown telling me that a program needs my action and when i accept it, the message appears about c:windowssystem32spoolsv.exe experiencing a runtime error and requesting the runtime to terminate it, or sth like this - so just the standard spoolsv.exe error message. and then... voila! the wi-fi icon shows just plain signal strtength bars and responds to my actions, and i can play sounds.the information that i use a lexmark x4975 wi-fi printer might be of some significance. i don't remember now exactly (and don't have any way to check it) but i'm nearly sure that the situation with the printer is quite similar - before the error i can't use it, and after - i can.
View 2 Replies
View Related
Feb 8, 2012
I tried to run Windows Network Diagnostics and an error occurred. In the details it said the diagnostic file was 'restricted'.I searched around for answers and found a suggestion to run 'sfc/scannow' in an elevated command prompt. The file checker reported no 'integrity violations' but the Windows Network Diagnostics tool suddenly worked! (in the 2 year life of my Sony Vaio I don't recall it ever working before).The problem: when I next turn on my computer after it has been shut down, the Windows Network Diagnostics tool has stopped working again - unless I run 'sfc/scannow' - then it runs fine. [code]
View 9 Replies
View Related
Dec 20, 2010
Win7 64 bit reports a problem with the driver for Microsoft ISATAP Adapter and Toredo Tunneling Adapter. Troubleshooting does not automatically fix it and reports that the drivers are OK. I have seen several other reports of this problem but not yet found a cause or fix
View 6 Replies
View Related
Sep 18, 2009
Upon installing Need for Speed: Shift, I get this error:
"Error 1606: Could not access Network location 0"
Can anyone tell me where "0" is located at in the registry?
All of my searches led me to the "Recent" folder, so I tried the method for that along with others and no go. I just can't find the 0 folder (or whatever it is?
View 1 Replies
View Related
Jun 13, 2009
I have Win 7 on two of my machines, one is 32bit and the one I am using at the moment is 64bit. I have a rather unusual problem in that I can access my Router in FF on the 32bit machine (IE as well) but on the 64bit, Nothing
When I enter the IP address for my Router it just sits there and then comes up with a Page Load Error? this happens also in IE8. I have turned OFF the firewall, all the settings are the same in both machines, except the IP adress of course .
View 6 Replies
View Related
Oct 19, 2009
I've downloaded the newest installation package several times and changed even between Home and Pro packages. Error stays the same, and as far as I've found out it's due to a network error. Has anyone else experienced the problem?
Here is the error log that Avast installer gives:
19.10.2009 09:58:39 general: Started: 19.10.2009, 09:58:39
19.10.2009 09:58:39 system: Operating system: Windows Vista ver 6.1, build 7600, sp 0.0
19.10.2009 09:58:39 system: Memory: 33% load. Phys:2091832/2097151K free, Page:4194303/4194303K free, Virt:2035552/2097024K free
19.10.2009 09:58:39 system: Computer WinName: TONI-PC
19.10.2009 09:58:39 system: Windows Net User: toni-PC oni
19.10.2009 09:58:39 general: Old version: ffffffff (-1)
19.10.2009 09:58:39 system: Using temp: C:Users oniAppDataLocalTemp\_av_inet.tm~a00688 (920643M free)
19.10.2009 09:58:39 internet: SYNCER: Type: use IE settings
19.10.2009 09:58:39 internet: SYNCER: Auth: another authentication, use WinInet
19.10.2009 09:58:39 general: Install check: Program folder does NOT exist in registry
19.10.2009 09:58:39 general: SGW32P::CheckIfInstalled set m_bAlreadyInstalled to 0
19.10.2009 09:58:41 general: progress thread start
19.10.2009 09:58:41 general: Destination: C:Users oniAppDataLocalTemp\_av_inet.tm~a00688
19.10.2009 09:58:41 general: Starting download: http://www.avast.com/go.php?verb=get-avast-home&type=cnet&langid=fin
19.10.2009 09:58:41 general: Download finished from server avast! - Download antivirus software for spyware and virus protection, result: 0x20000006, server response: 301
19.10.2009 09:58:41 general: Stats avast! - Download antivirus software for spyware and virus protection, server response: 536870918
19.10.2009 09:58:42 general: POST result: 0x00000000, server response: 20
View 4 Replies
View Related
Oct 21, 2009
For some reason I am not able to transfer large files to my Windows Home Server (home build). The file will start to transfer then just stop and error out.
The error message says Network Error: There is a problem accessing serverfolder.
This is on a wired connection so I dont know why it would just be dropping the connection. I can still surf the internet fine during this time.
Realtek RTL8169/8100 network cart, cat5e cable, 10/100 netgear 24 port unmanaged switch, WRT54GL router(tomato firmware). NICs are set to auto negotiate.
Any ideas what could be causing this?
I attached a screen shot of the error message and network monitor.
View 9 Replies
View Related
Nov 29, 2009
I have a Desktop computer with Windows 7 (32 bit) and a laptop with Windows 7 (64 bit). I'm trying to set up a network printer, so I can print from my laptop using my desktop computeer printer. I've set up my wireless computer which uses Windows Xp just fine, and can print from that computer. But when I try to add a network printer on my laptop, as it's finishing installation, an error message pops up saying "cannot connect to printer" error code 0x0000000d. Any feedback would be greatly appreciated. Is it possible to set up a 64 bit with a 32 bit computer?
View 3 Replies
View Related
