I have a home network with 4 computers; 3 wireless, 1 Ethernet. When they were all XP, things were working fine. Now 2 of the wireless systems have been upgraded to Windows 7 with the "family Pack" retail upgrade.
I believe I have made all the proper permissions and security policies, but this is not working. The Windows 7 system can access the XP system folders. but the XP systems can see the Windows 7 system but get an access violation error.
I've tried some of the suggestions in other thread, no joy. I turned off the McAfee firewall, but that doesn't help.
XP doesn't know anything about "Homegroups" I have a work group name and its set on all systems,
I have this problem with my new Asus laptop which was fine yesterday, but cannot connect to any wireless network now. When I click the Network connections button on my task bar it shows me my internet connection with the words Limited Access next to it. I've been on google for a good 2 hours and can't really find the answer. I may know what's wrong, however. Yesterday I pressed the shutdown button on my laptop and then it starts those automatic updates that happen when you shut down. It said something like "Updating 1 of 1 updates". It took a while so I put thelaptops screen down, and when I checked on it again 5 minutes later... Blue screen. I held the power button down on my laptop and shrugged it off.. but now I can't connect to any wireless network.Assuming the network driver is the thing that was updating last night, I searched up what to do, Rollback the dri
Once I've started my computer the "Network" icon is kind of "searching" but after a while it becomes red like I have no internet access. But I do got internet, I can go the internet but I can't open anything in the start menu. Then after a while again, the icon becomes "normal" and everything works fine. The code I get when I troubleshoot is "0x80070426" and the troubleshooter wont start. This is kind of annoying, I am using Windows 7 ultimate.
I have a brand new acer aspire notebook and I'm trying to connect to my airport extreme card built into my iMac desktop. The laptop sees the signal just fine, but it will not connect to the Internet and I get "limited access". What can I do to connect?
I am having an intermittent problem isnalling different programs in Windows 7. I will get the following error message when the insall fails "Error 1606. Could not access network location %AppDATA%." When I got this error before I was able to get around it by crated another administrator account in Windows to install programs. Since then I have did a clean install of windows and the issue went away until several months ago. So far the programs that I cant install are Java updates, and Quickbooks Starter Edition. Below you will find some basics about my PC.
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i3 CPU 530 @ 2.93GHz, Intel64 Family 6 Model 37 Stepping 2 Processor Count: 4
I was wondering I anyone could help with this. I am receiving multiple BSOD daily. I have already ran the HP Disk check and it has reported no problems. I have included the dmp file as requested.
I have been getting a "Windows Framework driver violation" BSOD when I am playing video games on my PC. This started after I installed Guitar Pro 6, which might be a mere coincidence or it might not be. I did the whole analysis stuff and here is the result:
Windows 7 forums.zip
I ran DriverGenius and updated all drivers that it suggested. Also ran windows update and it updated some stuff (updated everything except the language packages for windows) and still nothing. I also downloaded the latest driver for my graphics card. A beta version that just came out. The game still crashes. I have only tried playing FIFA 13 and it keeps crashing at random times. Sometimes when I am choosing the language, sometimes in the middle of a match, sometimes in the menus. Just completely random.
Last night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.
Today, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
I have 2 different laptops. both running Windows7 and connecting to the internet wirelessly. within a few days of each other they both began to display "Currently connected to: Unidentified network No network access" and they will not let me get on the internet. It is not my router becuase It shows the same thing no matter where I try to connect. I have tried my gym and a local restaurant that I have always had success connecting to before. Furthermore my WindowsXP desktop is directly connected and is connecting to the internet without any problems. My laptops are both running AVG for antivirus.
For boxing day, I bought myself a new Computer case, a Cooler Master HAF 932. After setting it up and booting my computer, without any problems, my Internet would not work.
I attached the Network & Sharing Centre screen to show you what it says. I've tried many things, switching cables, direct input from modem (I use a router), and all sorts of guides that have similar problems.
I have just set up a new ASUS zenbook prime. I set up the wireless network 2 nights ago and had no problems. I then installed Microsoft Office 2010 and the problems started. I started getting errors about ATK0100 driver missing and the wireless function stopped working. I re-installed the ATK0100 driver and that stoppped that error message. I then thought that the wireless adapter may have also been affected by the Offce install so I removed then re-installed that one (Intel Centrino(R) Advanced-N 6235). I also unistalled Office but still hasn't fixed the problem. I can connect via a 4G USB wireless adapter but can't connect to my home wireless modem. I have 2 other laptops (windows7 and vista) accessing the wireless modem. When I try to connect the error is "no network access"" and "Windows was unable to connect to "SSID"". I have tried removing the wireless network and adding it again but to no avail. I have also used the troubleshooter but it can't find anything wrong either. The wireless function is on and I'm not sure what else to try? I have trawled through lots of forums and it seems like quite a few people have the same problem but I haven't yet found an answer.
I help network and run some office locations that run two or more computers. One computer is setup as a server with specific software on it, and another or more computers are setup as workstations.When attempting to connect to a workstation computer in the network I receive the error message:Network Error Windows cannot access \ComputerName Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose. Error Code: 0x80070035 The Network path was not found Here are some details:I'm trying to connect to a computer running Windows XP SP3 from a different computer running Windows 7 Pro Sp1 (both machines are 32-bit). Share folders are setup correctly giving everyone and administrators full access. I'm trying to connect from an administrative account created with the same name and password on both computers. Both computers have the same subnet and similar IPs (IE, one IP is 192.168.1.1 and the other is 192.168.1.2). Both computers are on the same workgroup name. Enable TCP/IP is setup on the network adapter (versus being "Default"). TCP/IPv6 is disabled Windows Firewall is disabled on the WinXP computer, and turned off on the Windows 7 computer. Computer Browser, Server, SSDP Discovery, and TCP/IP NetBIOS Helper services are all set to Automatic startup and started. Both computers have other software anti-virus/firewall that have been disabled (for testing purposes). I can browse the shared folder on the Windows 7 computer from the WinXP computer without problem, and don't get the above error on WinXP. Other interesting facts are that I can see the WinXP computer when opening the Network browser on the Windows 7 computer, but I can't see the Windows 7 computer in the Network Places browser on the WinXP computer. Also, I can edit the HOSTS with the computer names/IPs to stop the above error message, but it's really only a bandaid to this problem.I have other services that broadcast from the Windows 7 computer via the network adapters based on the LANA number (which I have correctly setup). These broadcast information and let software on the WinXP computer work correctly. These broadcasts are not getting through as if the LANA number was setup incorrectly, even with the HOSTS file edited.
I would like to find a solution without having to edit the HOSTS file. I've been reading forum post after forum post (google search). What's frustrating is this is not the only environment I have something like this setup (Windows 7/WinXP mix), but this network is the only one I'm having issues with. I've Looked over every concievable network setting between two identical mixed OS locations and found nothing different. Yet the problem persists. The Windows 7 computer was just upgraded to Windows 7 from WinXP Also. The image used to do the upgrade is the same used at another location I compared this computer to.
The company that i work for has just bought five new HP Compaq 6000 Pro running Win7 64bit (one for each department i.e. Trade Finance, Operations, Compliance, Accounts & Credit). I created standard user account for each member of the respective departments as well as admin account for myself. I setup a workgroup to connect all PCs to share a printer that is connected directly to one of the PC (Credit dept).
Here's the problem:
Three of the PCs (Trade Finance, Operations & Compliance) can access Credit PC and vice versa without any problem. However, Accounts PC will get an error message: "Logon failure: the user has not been granted the requested logon type at this computer" everytime trying to access Credit PC when login as standard user. But when I login as admin, I don't get any error whatsoever. Same thing happen when I login from Credit PC and access Accounts PC. No error.
I have disabled the firewall for both Accounts & Credit PCs and even changed all user accounts for Accounts PC to admin but still keep geeting the same error message.
I have Windows 7 Pro 64 and I am trying to access an XP machine that is on the wireless network and when I click on that machine's name, I get a Windows Security box asking "Enter Network Password" and it has fields for User name and Password.
I've never seen this box before and I don't remember ever setting a password for the XP machine. I can access my Windows 7 laptop successfully. How can I access the XP machine?
I set up a new wireless connection and its done perfectly but I can't access from other device ( Ipod touch) the access type: no network access whereas the assess type it must be internet who do I solve this problem.
I have this machine and an XP machine on my network. The XP machine has the link layer hotfix installed for SP3. Both machines are fully updated.
Now I had a couple of hard drives shared and the XP machine had access to them without any issues at all. I needed more space on the music drive which was an external USB drive. I bought a Western Digital 500Gb internal sata drive and installed it. I moved the music to the new drive and shared the drive the same as the other drives were shared.
This is where it gets weird. The new drive shows up as a network location on the XP machine however it cannot be accessed. I get an error saying I need to make sure I have proper privileges. I do have them because the drive has full access for everyone assigned to it in permissions. The XP machine can still access the other drive I have shared with all my videos on it. So the problem is only with the new drive and all of the settings check out.
I have two internet connections, BSNL Broadband and Reliance Netconnect. I have been using both connections since last year and I have never faced this problem of "Unidentified network" and "No network connection". It was only in June this year that I began facing this problem. When my BSNL is connected, my PC does not detect it yet I can access internet. The networking icon in the task bar shows a Yellow Caution sign. When I use Reliance Netconnect, I can access internet but now, the yellow caution does not even appear, in fact there is a red cross. I have tried numerous trouble shooting steps like the cmd commands, disabling and enabling network adapters, etc but to no avail. However, when I put this in cmd "netsh winsock reset catalog", Reliance suddenly showed as active when I rebooted my PC. The Origin service of Electronic Arts happily went online. Then I disconnected Reliance and tried BSNL but no luck there. I reverted to Reliance and again the same problem. I repeated the steps again but still the same problem.
I have installed windows 7 RTM build 7600 and I have a yellow triangle with exclamation mark saying no network access but I can connect to internet. I am directly connected to internet via DSL modem D-Link 360 R and do not have router. This is on desktop computer. When I disconnect from net the exclamation mark shows and it's very annoying so can somebody help me?
Have 2 nics, 1 for INTERNET and 1 for intranet. Internet works fine until I set up #2 with default gateway then I get a error message when leaving properties box. something about redundant default gateways. If I leave this in place #1 network stops working. I have tried to just setting #2 to auto both ip and gateway. I can't even ping the server. It doesn't leave the computer.
I thought it was the nic card because i riped it out of the old computer and the driver wouldn't work for the Windows 7. So I bought a new one that was compatible with Windows 7. Nothing has worked. The problem is that this is not my computer it's my wifes, and she's not a happy camper. This set-up worked on the XP that was taken out of service and replaced with the Windows 7.
I have very common problem (as i see on the forums) but I still haven't found the solution.. I have 2 computers ... the old one (with win XP installed) and brand new one (with win 7 x64 ultimate inastalled). The problem is ... on the old computer internet works fine, but on the new one i Just can't get it work. It allways says "No network access".
I have no router ... computer is wired directly to my cable modem. I tried nearly everything ... but still no succses Network card (realtek ) is integrated to my motherboard and have installed the latest driver. Here are some snapshots...
I can snapshot&attach any other window, just tell me wich one.
Currently I have an internal network (no internet access), with a few XP workstations conencted via a hub, working fine. When I added a Win 7 computer, it cannot connect to the network. It says "unidentified network" and when I run troubleshooter, result is "does not have a valid IP configuration." Note that all the XP computers are using the NetBIOS protocol; TCP/IP is not selected.
I have a PC running Windows 7 Home Premium at my shop. I want to be able to access the files and folders on my shop PC from my home PC (which is obviously on a different network).
I am having problems with my daughter's laptop accessing the internet with her wifi, She accidentally reset her laptop back to factory settings. She also didn't make any recovery disks. The problem is now the laptop keeps asking for a network user name/Password when she tries to access the internet. I have researched this issue but to no avail. I am curious as to how to resolve this issue. I feel the only way may be to reset the wireless router back to factory settings and start again.
My wife is running Win7 home and about 4 or 5 times a week when she boots up windows won't recognize the built in network adapter.
Device driver shows it's functioning properly, troubleshooter only comes up with update driver, but the driver is working. After several reboots it finally connects. Or, if I disable the network adapter and then re-enable it, it works.
Asus machine, wired connection less than a year old. Big hard drive 4gb ram, AMD cpu. We DON"T get the Unidentified Network problem.
So I am having a strange problem with a PC. The hardware seems to be working. The same problem happens on all interfaces (wired and wireless connections). I cannot get access to the network period, even though the computer has a valid IP configuration via DHCP.The strange thing is that Windows 7 says that it has internet access up until the point I try to access the network or internet with any application. IE causes a loss in connection, Firefox, Windows Updates, etc.So I have tried this so far at the command prompt to no avail.netsh int ip resetandnetsh winsock resetWhat do you all think? I am thinking that a reinstall of Windows is needed.
