No Network Access

Jan 5, 2010

I have very common problem (as i see on the forums) but I still haven't found the solution.. I have 2 computers ... the old one (with win XP installed) and brand new one (with win 7 x64 ultimate inastalled). The problem is ... on the old computer internet works fine, but on the new one i Just can't get it work. It allways says "No network access".

I have no router ... computer is wired directly to my cable modem. I tried nearly everything ... but still no succses Network card (realtek ) is integrated to my motherboard and have installed the latest driver. Here are some snapshots...

I can snapshot&attach any other window, just tell me wich one.

View 9 Replies


ADVERTISEMENT

Unidentified Network, No Network Access, Limited Access

Dec 29, 2009

I have a brand new acer aspire notebook and I'm trying to connect to my airport extreme card built into my iMac desktop. The laptop sees the signal just fine, but it will not connect to the Internet and I get "limited access". What can I do to connect?

View 1 Replies View Related

Unable To Connect To Wifi - No Network Access/limited Access

Nov 10, 2011

Last night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.

View 2 Replies View Related

Unidentified Network; No Network Access - Powerline Adapters

Dec 1, 2011

Today, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?

View 2 Replies View Related

Unidentified Network No Network Access

Jul 18, 2012

I have 2 different laptops. both running Windows7 and connecting to the internet wirelessly. within a few days of each other they both began to display "Currently connected to: Unidentified network No network access" and they will not let me get on the internet. It is not my router becuase It shows the same thing no matter where I try to connect. I have tried my gym and a local restaurant that I have always had success connecting to before. Furthermore my WindowsXP desktop is directly connected and is connecting to the internet without any problems. My laptops are both running AVG for antivirus.

View 4 Replies View Related

Unidentified Network - No Network Access

Apr 8, 2011

my laptop doesn't connect to my wireless network, neither by cable (wired).

View 9 Replies View Related

Unidentified Network - No Network Access

Dec 31, 2011

Yesterday it worked and when I booted today it didn't I have absolutely no idea what the problem is and I have checked everything I know with no use.

- I am using d-Lan (PowerLan) and have had no problems with it until today.

- My router, modem and the d-lan devices are functioning properly which I have tested multiple times so I'm sure the problem lies with my computer.

- I have tried Troubleshooting with no effect

- It isn't an IP conflict

- It isn't a 3rd party program (I started it in safe mode, same problem)

- Internet still works over my W-Lan but is incredibly slow and unstable

View 6 Replies View Related

Unidentified Network - No Network Access

Dec 26, 2009

For boxing day, I bought myself a new Computer case, a Cooler Master HAF 932. After setting it up and booting my computer, without any problems, my Internet would not work.

I attached the Network & Sharing Centre screen to show you what it says. I've tried many things, switching cables, direct input from modem (I use a router), and all sorts of guides that have similar problems.

View 9 Replies View Related

Can't Access A Pc In The Network

Mar 15, 2011

The company that i work for has just bought five new HP Compaq 6000 Pro running Win7 64bit (one for each department i.e. Trade Finance, Operations, Compliance, Accounts & Credit). I created standard user account for each member of the respective departments as well as admin account for myself. I setup a workgroup to connect all PCs to share a printer that is connected directly to one of the PC (Credit dept).

Here's the problem:

Three of the PCs (Trade Finance, Operations & Compliance) can access Credit PC and vice versa without any problem. However, Accounts PC will get an error message: "Logon failure: the user has not been granted the requested logon type at this computer" everytime trying to access Credit PC when login as standard user. But when I login as admin, I don't get any error whatsoever. Same thing happen when I login from Credit PC and access Accounts PC. No error.

I have disabled the firewall for both Accounts & Credit PCs and even changed all user accounts for Accounts PC to admin but still keep geeting the same error message.

View 1 Replies View Related

Cannot Access Other PC On Network

May 2, 2011

I have Windows 7 Pro 64 and I am trying to access an XP machine that is on the wireless network and when I click on that machine's name, I get a Windows Security box asking "Enter Network Password" and it has fields for User name and Password.

I've never seen this box before and I don't remember ever setting a password for the XP machine. I can access my Windows 7 laptop successfully. How can I access the XP machine?

View 5 Replies View Related

No Network Access

Nov 7, 2011

I set up a new wireless connection and its done perfectly but I can't access from other device ( Ipod touch) the access type: no network access whereas the assess type it must be internet who do I solve this problem.

View 7 Replies View Related

HDD - No Access On Network

Aug 21, 2009

I have this machine and an XP machine on my network. The XP machine has the link layer hotfix installed for SP3. Both machines are fully updated.

Now I had a couple of hard drives shared and the XP machine had access to them without any issues at all. I needed more space on the music drive which was an external USB drive. I bought a Western Digital 500Gb internal sata drive and installed it. I moved the music to the new drive and shared the drive the same as the other drives were shared.

This is where it gets weird. The new drive shows up as a network location on the XP machine however it cannot be accessed. I get an error saying I need to make sure I have proper privileges. I do have them because the drive has full access for everyone assigned to it in permissions. The XP machine can still access the other drive I have shared with all my videos on it. So the problem is only with the new drive and all of the settings check out.

Anyone else have this kind of problem?

View 8 Replies View Related

No Network Access?

Jul 11, 2012

I have two internet connections, BSNL Broadband and Reliance Netconnect. I have been using both connections since last year and I have never faced this problem of "Unidentified network" and "No network connection". It was only in June this year that I began facing this problem. When my BSNL is connected, my PC does not detect it yet I can access internet. The networking icon in the task bar shows a Yellow Caution sign. When I use Reliance Netconnect, I can access internet but now, the yellow caution does not even appear, in fact there is a red cross. I have tried numerous trouble shooting steps like the cmd commands, disabling and enabling network adapters, etc but to no avail. However, when I put this in cmd "netsh winsock reset catalog", Reliance suddenly showed as active when I rebooted my PC. The Origin service of Electronic Arts happily went online. Then I disconnected Reliance and tried BSNL but no luck there. I reverted to Reliance and again the same problem. I repeated the steps again but still the same problem.

View 1 Replies View Related

No Access To Network

Sep 24, 2009

I have installed windows 7 RTM build 7600 and I have a yellow triangle with exclamation mark saying no network access but I can connect to internet. I am directly connected to internet via DSL modem D-Link 360 R and do not have router. This is on desktop computer. When I disconnect from net the exclamation mark shows and it's very annoying so can somebody help me?

View 9 Replies View Related

No Network Access On 2nd Nic

Jan 4, 2010

Have 2 nics, 1 for INTERNET and 1 for intranet. Internet works fine until I set up #2 with default gateway then I get a error message when leaving properties box. something about redundant default gateways. If I leave this in place #1 network stops working. I have tried to just setting #2 to auto both ip and gateway. I can't even ping the server. It doesn't leave the computer.

I thought it was the nic card because i riped it out of the old computer and the driver wouldn't work for the Windows 7. So I bought a new one that was compatible with Windows 7. Nothing has worked. The problem is that this is not my computer it's my wifes, and she's not a happy camper. This set-up worked on the XP that was taken out of service and replaced with the Windows 7.

View 3 Replies View Related

Cannot Access Existing XP Network

Jul 14, 2011

Currently I have an internal network (no internet access), with a few XP workstations conencted via a hub, working fine. When I added a Win 7 computer, it cannot connect to the network. It says "unidentified network" and when I run troubleshooter, result is "does not have a valid IP configuration." Note that all the XP computers are using the NetBIOS protocol; TCP/IP is not selected.

View 9 Replies View Related

How To Access Files On PC (from A PC On A Different Network)

Nov 7, 2011

I have a PC running Windows 7 Home Premium at my shop. I want to be able to access the files and folders on my shop PC from my home PC (which is obviously on a different network).

View 2 Replies View Related

Unable To Access Network

Jun 6, 2012

I am having problems with my daughter's laptop accessing the internet with her wifi, She accidentally reset her laptop back to factory settings. She also didn't make any recovery disks. The problem is now the laptop keeps asking for a network user name/Password when she tries to access the internet. I have researched this issue but to no avail. I am curious as to how to resolve this issue. I feel the only way may be to reset the wireless router back to factory settings and start again.

View 9 Replies View Related

[64-bit] No Access To Network On Boot?

Feb 26, 2011

My wife is running Win7 home and about 4 or 5 times a week when she boots up windows won't recognize the built in network adapter.

Device driver shows it's functioning properly, troubleshooter only comes up with update driver, but the driver is working. After several reboots it finally connects. Or, if I disable the network adapter and then re-enable it, it works.

Asus machine, wired connection less than a year old. Big hard drive 4gb ram, AMD cpu. We DON"T get the Unidentified Network problem.

View 9 Replies View Related

Cannot Get Access To Network Period

Jul 5, 2011

So I am having a strange problem with a PC. The hardware seems to be working. The same problem happens on all interfaces (wired and wireless connections). I cannot get access to the network period, even though the computer has a valid IP configuration via DHCP.The strange thing is that Windows 7 says that it has internet access up until the point I try to access the network or internet with any application. IE causes a loss in connection, Firefox, Windows Updates, etc.So I have tried this so far at the command prompt to no avail.netsh int ip resetandnetsh winsock resetWhat do you all think? I am thinking that a reinstall of Windows is needed.

View 1 Replies View Related

Gadget Network Access

May 15, 2009

I have just moved from Beta to RC and while it looked like everything is OK, I'm having this strange problem where my Weatherbug and XM gadgets will not work UNLESS I connect to a VPN. I have disabled the firewall, purged the DNS cache, disabled / re-enabled the NICs, but the problem remains. I have tried this on multiple networks on both my Ethernet and wireless connections (Dell D630 notebook) and get the same result. Any ideas? I'm not even sure where to start looking!

One more thing: I did perform an upgrade install from Beta x64 to RC x64 instead of the "demanded" clean install.

View 2 Replies View Related

Network - XP Cannot Access Win7

Jun 9, 2009

I am having an apparently common problem: my Windows 7 machine can access my XP/SP3 laptop just fine but though the XP can see the Windows 7, it can't access it at all. What I get is...[Windows 7 machine] is not accessible. You might not have permission to use this network resource... yada yada yada.

I've looked up the topic and this phrase and find lots of answers, some ridiculously complex (registry hacks?), most of them contradicting each other. Nothing I've found offers a step-by-step how-to.

I'm one of those who skipped Vista, so I'm not familiar with all the new security. When my home network was all XP, I just connected a computer to the workgroup, gave folder permissions, and go. (I don't use passwords.)

So how do I do it now?

There are/will be a lot of us moving to 7 straight from XP, and we need some sort of "you used to do this, now you must do this" type of guide.

View 2 Replies View Related

VPN Connects, No Network Access

Jun 9, 2009

I've set up the client to connect to the PPTP VPN at my workplace. It connects, but I can't access any computers on the network through explorer or remote desktop, by IP address or by name. Also, the internet will not connect after connecting to the VPN [we have a proxy, and the browser won't connect to it].

On the VPN status, the IPv4 Connectivity is listed as Internet

the IPv6 is listed as No Network Access.

I can, in a command prompt, ping network computers by name or IP. ipconfig /all gives, from what I can see, identical results to a Vista computer that connects properly.

This occurs from my house [set up as a Home network] and from public networks. The VPN is set up as a Work network. I've tried changing these and it doesn't seem to help. I've also tried disabling Windows firewall.

View 7 Replies View Related

Cannot Access Network Shares

Jul 10, 2009

I have a linux samba share setup that I use for my file server. It's setup for guest access.

Recently when I tried accessing the server, it asked me for a username and password, which it shouldn't. So I typed in guest, didn't work, I typed in the root account, didn't work.

My roommate can still access the server just fine. I checked all the permissions on the linux box, and it has to be an issue with my computer. I had my roommate setup a shared folder on his computer, and I couldn't access it either.

I'm not sure what happened to cause this... one day it worked, the next day it didn't. I tried a system restore thinking maybe some update caused an issue, but that didn't do anything. I've checked various registry keys, made sure the proper services are running. I'm lost as to what could be causing this...

View 9 Replies View Related

Ipv6 No Network Access

Sep 7, 2011

im getting this error im loged in my internet now but on IPV6 network settings it says ipv6 no network access can you help me .also troubleshoot it and it says "your computer does not meet the requirements for direct acess why also when im using internet the conection wents off sometime

View 2 Replies View Related

How To Access Files On PC (from A PC On A Different Network)

Nov 7, 2011

I have a PC running Windows 7 Home Premium at my shop. I want to be able to access the files and folders on my shop PC from my home PC (which is obviously on a different network

View 3 Replies View Related

No Network Access To Samba

Aug 16, 2009

I have a major problem. My Windows 7 RC Build 7100 can't suddenly connect to my linux server via Samba at all. It's been running for month doing just fine.

It's a wired connection. I can logon via SSH, browse public web folders, and ping host <-> client, both IP address and netbios name. However Samba is dead silent when trying to map a share.

I have checked the LAN configuration + Local Security Policy. Turning off the Windows firewall doesn't do a thing either.

When checking network, "net view 192.168.0.2", it returns "System error 53 has occurred. The network path was not found."

Googling the above message mentions a "DNS problem", but I don't have a clue what to do next.

View 4 Replies View Related

Can't Access Network Share

Aug 20, 2009

I have a few computers on the network and they have shared files.I can see their shares fine, they can't see mine.

192.168.0.1 ->this doesn't work for them, they keep getting the error that they don't have permission to acess it.

192.168.0.1SharedFolder

this works for them.They are mixed machines, vista, windows7 but they all get the error when trying to connect directly to my ip.

I tried enabling and then disabling homegroup(not using it btw) turning password protected sharing on and off, NOTHING works

What does one have to reset/fix in order to connect to the ip and see the shares on that machine.

View 4 Replies View Related

Can't Access A Network Device

Apr 4, 2012

I have a projector on my network which has LAN connectivity for the purpose of emailing error messages (ie. lamp due to be changed). The connection path is as follows:Using cat5e, I've connected the projector to a 5-Port Linksys SD205 where there are other devices connected. The SD205 is connected to a 24-Port Zyxel via cat5e which is where all network devices meet.The projector is properly configured with IP information. I am unable to ping the projector through the network. The port to which it is connected gets a brief, intermittent flash. If I connect the projector directly to the Zyxel switch, I can ping it and access it via IE.I thought the same so I swapped it out with a 8-Port Linksys EZXS88W but still get the same results.Perhaps it is a quirk with Linksys, so I swap out the switch with a 3com and still the same results.Why would this device connect when directly connected to the ZyXEL but not when going through the Linksys SD205? What does the intermittent flashing light on the Linksys SD205 mean?

View 9 Replies View Related

Cannot Access Spares HDD's On Network

Apr 16, 2012

So the problem is that my brother cannot access my spare hard drives over the network. And I cannot access his. We can get on each other's C: drives but any other hard drives that are set to share gives the error that he doesn't have permission to access the drive. What we do is right click the drive goto properties/sharing and click Advanced Sharing and tick share the folder. With this done he can see the drive but cannot access it without permissions. So I click permissions and tick full control butu still he cannot access it.what to do to properly share the drive and give access to it other the network.

View 1 Replies View Related

Cannot Access Files On A Different Pc On My Network

Jul 15, 2012

I want to be able to access and change files on my main pc, from my laptop which is in a different room, same with my wife's pc as well.Each time I go the network, I can see the computers, but each time I want to access files it comes up asking for password and user name.I have never set a user name or password and it is confusing the hell out of me to sort this out....

1.do I have to make sure the files are in a particular place, and saved in that place all the time?

2.can I not make "my documents" available to my wife and my laptop, and vice versa if they are swtiched on?

There must be a way to share our individual files and make them read write for ourselves?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved