im getting this error im loged in my internet now but on IPV6 network settings it says ipv6 no network access can you help me .also troubleshoot it and it says "your computer does not meet the requirements for direct acess why also when im using internet the conection wents off sometime
View 2 Replies
IPv6 shows No Network Access. Never had this before. WOn't let me log on to my Diablo 2 Battlenet(Yes 2, not 3, yet) No idea why or how it happened. This is a desktop and hooked up by a wire.And now saying No Internet Access!
View 3 Replies View RelatedI am on an aspire one netbook and can no longer connect to the internet via wireless or a wired connection. I typed ipconfig/all in command prompt and all I got was..:
Host name:
Primary Dns Suffix:
Node Type: Broadcast
IP Routing Enabled: No
WINS Proxy Enabled: No
I do have a desktop and when I ipconfig/all this is what comes up
C:Documents and SettingsAdministrator>ipconfig/all
Windows IP Configuration
Host Name: your-9k1ay6x2a2
Primary Dns Suffix:
Node Type: Hybrid
IP Routing Enabled: No
WINS Proxy Enabled: No
I recently had a sound problem on the internet in google chrome ( no sound at all although the system sound worked fine). Installed shockewave and reinstall chrome on my pc and reboot my pc all remotely. At this stage my problem with chrome was not solved (although the sound in Explorer and firefox worked). After the remote reboot I could not reconnect to the internet. The local area connection status shows that ipv4 & 6 is not connected anymore.
I tried to turn on and off my network adapter, turn off my firewall and connect my pc directly to my cable modem( instead of being connected to my cisco 4200 v2 router) but nothing! I also tried to restart the DNS Client service and the DHCP client service: still nothing. The windows troubleshoot indicate a problem with the network adapter driver but I doubt it. I am running windows 7 ultimate.
I am using Windows 7 Pro and I can't access the Internet My IPv4 is working but I get this:
IPv4 : Internet
IPv6: No Internet Access
But when I open Browser I get white page but on vBulletin forums I get a 404 error on Every Forum site I go to. So I have a laptop, my brothers computer, xbox360, and my own pc all connected wired to the same router. Recently my PC is unable to get any internet at all from anything, even though it says:
ipv4 internet
ipv6 no internet access
It shows I am receiving and sending packets but not very often. All my other computers on my network except my one PC, I thought maybe it was my integrated network card on the computer but it seems I am not the only one who has had this problem.
Quote: The move to Internet Protocol version 6 (IPv6) could have a profound affect on the Internet, breaking it up into islands of connectivity and threatening cybersecurity in the process, according to Jeff Young, a senior analyst at the Burton Group.
As the IPv4 free address pool continues to dwindle, enterprises can expect to see IPv6-only hosts on the Internet within a three-year timeframe, Young said. In the report, "IPv4 Address Exhaustion: An Inconvenient Truth," Young addresses the incompatibility of IPv4 and IPv6 and some of the problems that need to be addressed during the changeover.
Source: IPv6 move could cause network problems, threaten cybersecurity
M wireless is flaky to say the least. Realtek 8185 adapter connects sometimes to the interwnt but is painfully slow. Drops connection all the time. My network name changes intermittently between "xxxxxx" and "xxxxxx 2", my network switches between home and public.
View 2 Replies View RelatedI have a brand new acer aspire notebook and I'm trying to connect to my airport extreme card built into my iMac desktop. The laptop sees the signal just fine, but it will not connect to the Internet and I get "limited access". What can I do to connect?
View 1 Replies View RelatedLast night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.
View 2 Replies View RelatedToday, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
View 2 Replies View RelatedI m trying to connect two PC using IPv6 and i m getting reply to connected but i can't access shared folder it say Network Error Windows can't access.i m tried following Address \fe80::1 So How can i get shared folder Using IPv6..
View 1 Replies View RelatedI have 2 different laptops. both running Windows7 and connecting to the internet wirelessly. within a few days of each other they both began to display "Currently connected to: Unidentified network No network access" and they will not let me get on the internet. It is not my router becuase It shows the same thing no matter where I try to connect. I have tried my gym and a local restaurant that I have always had success connecting to before. Furthermore my WindowsXP desktop is directly connected and is connecting to the internet without any problems. My laptops are both running AVG for antivirus.
View 4 Replies View Relatedmy laptop doesn't connect to my wireless network, neither by cable (wired).
View 9 Replies View RelatedYesterday it worked and when I booted today it didn't I have absolutely no idea what the problem is and I have checked everything I know with no use.
- I am using d-Lan (PowerLan) and have had no problems with it until today.
- My router, modem and the d-lan devices are functioning properly which I have tested multiple times so I'm sure the problem lies with my computer.
- I have tried Troubleshooting with no effect
- It isn't an IP conflict
- It isn't a 3rd party program (I started it in safe mode, same problem)
- Internet still works over my W-Lan but is incredibly slow and unstable
For boxing day, I bought myself a new Computer case, a Cooler Master HAF 932. After setting it up and booting my computer, without any problems, my Internet would not work.
I attached the Network & Sharing Centre screen to show you what it says. I've tried many things, switching cables, direct input from modem (I use a router), and all sorts of guides that have similar problems.
I'll try my best to explain all the issues clearly.from very above downto the third line are:IPv4 connection : not connected (Not OK, it wasn't like that)IPv6 connection : not connected (No public IPv6 connection in China, this is OK)Media State: connectedBut as you can see below, network is OK (Yeah, it seems that). The problem is, this ADSL connection is not showed in 'Avtive Networks'.Most online activities are OK, but somw applications like EA Origin are malfunctioned(I'm sure it is because of the problem in network connection)I've tried reset my winsock, LSP, netsh int ipv4,also reinstalled drivers. All above didn'you may wanna have a look at my Network and Share Center. Here it comes.Area 1 shows that there is no active networks except a 'unidentified network'(this refers to Local Area Conncetion. Since I don't neither have a router nor use LAN, that don't matter). When ADSL was OK, I got a active ADSL network there.
View 2 Replies View RelatedI have a QNAP NAS and several devices (mostly Windows 7 and iOS devices)The vast majority of my networking setup seems OK - however on one Windows 7 laptop I am having problems. The Laptop can 'see' remote shares, access the Internet and ping other devices on the network - however remote devices cannot ping the laptop. Whilst trying to ascertain what could be the cause I thought that I would ping 'localhost' on the laptop - after all, it should be able to see itself!
[code]....
My wifi was working fine a few days ago but i think the windows update has messed up my wifi adapter or connection. I did do a system restore when this happened a few days ago but since the restore is more then 1month old it is no more.So far i have tried the following:restarting/rebooting router,updating/reinstalling drivers,and many other things but nothing seemed to work i dont understand why it is scanning for wifi but on the mapping it says adapter isnt connected.I have shown a few pics to help you:
[spoiler]
[/spoiler]
Looks like its time to upgrade from my older Linksys WRT54GX router to a new one. My question is which new routers support IPv6?? How can you tell?? Is there a comprehensive list of new routers supporting it? (If I am to upgrade, might as well get a nice one that supports it).
good/great (wireless) router that plays nice with Windows 7 x64? Something in the sub $200 range. Willing to spend more for a better product. (In doing some research I have seen poor reviews for virtually all routers, no matter the make/brand... so maybe I should be looking for the "LEAST WORST"..LOL)
Currently I have 4 hardwired computers and 4 wireless devices (1 computer, 3 "other"--ipod touch, wii, etc)
I have a set of PCs which if connected to a windows network will make all computers on that network default to ipv6 when resolving names. This happens even if IPv6 is unchecked, if the ipv4 binding is set above 6 in the advanced properties of the network card. If any of these PCs joins a network with a point of sale system (Aloha) that system develops problems since Aloha does not like IPv6. At all. All computers including the aloha terms are Windows 7, 32 or 64 bit. Reproduced this with different routers and network topologies.
For example, I take one of these particular PCs to my home network Prior to the terminal going onto the network
ping localhost --> 127.0.0.1
ping computername --> 192.x.x.x
After the PC has joined the network, just attached to the same router, not on the same workgroup, etc., now all computers on the network return
ping localhost --> ::1
ping computername --> 08fe:xxxx (IPv6 address)
ping computername -4 --> 192.x.x.x
ping localhost -4 --> 192.x.x.x
This behavior continues even without IPv6 enabled on any adapter on the network. When the PC is removed from the network, all other PCs continue with the new behavior. I have tried netsh winsock reset, net stop dnscache, netsh int ip reset.log hit, unchecking IPv6 in multiple places, ensuring binding order has IPv4 above IPv6 on all network adapters (none hidden) etc. It's like this PC infects other windows PCs with IPv6. I have not tried disabling IPv6 from the registry or by Policy in my lab but I believe I tried this on previous network with no effect.
i already follow this guide: How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7 and Windows Server 2008 to disable ipv6. and already try all combination from 0xffffffff until 0x11
0xffffffff will disable ipv6, but listening port still bind to ipv6.
for example, i still can ping ::1 even though that above registry editing should "disable the ipv6". and when i do netstat -an | find "LISTEN", some ports still bind to ipv6, for example:
TCP [::]:80 [::]:0 LISTENING
TCP [::]:135 [::]:0 LISTENING
TCP [::]:443 [::]:0 LISTENING
TCP [::]:445 [::]:0 LISTENING
and so on. anyone have solution to permanently disabling ipv6? the reason why i want to rid of ipv6 listening is because it cause conflicting to my router when want to do port forwarding. i don't have any problem to port forward to other machine installing windows xp/2003. tq.
Windows 7 and IPv6, ISATAP, Teredo Tunneling Adapter?
View 1 Replies View RelatedI had a problem about ipv6 on windows 7 for a long time. I have a ipv6 & ipv4 dual stack network. Every time I wake up my computer, the ipv6 cannot work. The appearance is that I can't ping and access ipv6 website. But after some research, I realize that only the DNS part is broken. When I ping the ipv6 site like ipv6.google.com, it tells me it find no host, but if I use nslookup, I can find the ipv6 address. And the following are my tries:
ping ipv6.google.com -- not work
ping 2a00:1450:8001::68 -- does work, the ip is the ipv6.google.com address
ping -6 ipv6.google.com -- does work like the above
I have a number of systems with various flavors of Windows 7 installed - x64, x86, Home Premium, Ultimate, and so on. Some were factory installs, some were installed by me at various times.Although I manually configured an IPv6 address on each system, they all exhibit the problem of using an automatically-generated IPv6 address instead of the one I have configured. This makes it difficult to connect to servers which use IP addresses for access control, as the automatically-generated addresses change on reboot.[code] one which I have hard-coded, an auto-generated one marked "preferred" and another auto-generated one which is not marked "preferred". When I try to access another IPv6 host on the same LAN, the connection comes from the 2430:1432:1:2:60ee:fe68:8697:cf8a address.I've searched for a way to force Windows to use the IPv6 address I configured and I haven't found anything that worked.
View 5 Replies View RelatedI have a desktop that is connected to my Belkin router via wire. I have 3 laptops that are all connected to the router wirelessly. All computers have Windows 7 64bit and synched clocks. All are connected to a Home network. All 3 laptops detect that a Homegroup has been created on the wired desktop. I'm using the correct Homegroup password. All computers have discovery on. All computers have IPv4 and Ipv6 running. All services are running. Everything else I've read and tried regarding troubleshooting this issue haven't worked. All computers can see each other on the Network, but can't connect to the Homegroup.
View 9 Replies View RelatedThe company that i work for has just bought five new HP Compaq 6000 Pro running Win7 64bit (one for each department i.e. Trade Finance, Operations, Compliance, Accounts & Credit). I created standard user account for each member of the respective departments as well as admin account for myself. I setup a workgroup to connect all PCs to share a printer that is connected directly to one of the PC (Credit dept).
Here's the problem:
Three of the PCs (Trade Finance, Operations & Compliance) can access Credit PC and vice versa without any problem. However, Accounts PC will get an error message: "Logon failure: the user has not been granted the requested logon type at this computer" everytime trying to access Credit PC when login as standard user. But when I login as admin, I don't get any error whatsoever. Same thing happen when I login from Credit PC and access Accounts PC. No error.
I have disabled the firewall for both Accounts & Credit PCs and even changed all user accounts for Accounts PC to admin but still keep geeting the same error message.
I have Windows 7 Pro 64 and I am trying to access an XP machine that is on the wireless network and when I click on that machine's name, I get a Windows Security box asking "Enter Network Password" and it has fields for User name and Password.
I've never seen this box before and I don't remember ever setting a password for the XP machine. I can access my Windows 7 laptop successfully. How can I access the XP machine?
I set up a new wireless connection and its done perfectly but I can't access from other device ( Ipod touch) the access type: no network access whereas the assess type it must be internet who do I solve this problem.
View 7 Replies View RelatedI have this machine and an XP machine on my network. The XP machine has the link layer hotfix installed for SP3. Both machines are fully updated.
Now I had a couple of hard drives shared and the XP machine had access to them without any issues at all. I needed more space on the music drive which was an external USB drive. I bought a Western Digital 500Gb internal sata drive and installed it. I moved the music to the new drive and shared the drive the same as the other drives were shared.
This is where it gets weird. The new drive shows up as a network location on the XP machine however it cannot be accessed. I get an error saying I need to make sure I have proper privileges. I do have them because the drive has full access for everyone assigned to it in permissions. The XP machine can still access the other drive I have shared with all my videos on it. So the problem is only with the new drive and all of the settings check out.
Anyone else have this kind of problem?
I have two internet connections, BSNL Broadband and Reliance Netconnect. I have been using both connections since last year and I have never faced this problem of "Unidentified network" and "No network connection". It was only in June this year that I began facing this problem. When my BSNL is connected, my PC does not detect it yet I can access internet. The networking icon in the task bar shows a Yellow Caution sign. When I use Reliance Netconnect, I can access internet but now, the yellow caution does not even appear, in fact there is a red cross. I have tried numerous trouble shooting steps like the cmd commands, disabling and enabling network adapters, etc but to no avail. However, when I put this in cmd "netsh winsock reset catalog", Reliance suddenly showed as active when I rebooted my PC. The Origin service of Electronic Arts happily went online. Then I disconnected Reliance and tried BSNL but no luck there. I reverted to Reliance and again the same problem. I repeated the steps again but still the same problem.
View 1 Replies View RelatedI have installed windows 7 RTM build 7600 and I have a yellow triangle with exclamation mark saying no network access but I can connect to internet. I am directly connected to internet via DSL modem D-Link 360 R and do not have router. This is on desktop computer. When I disconnect from net the exclamation mark shows and it's very annoying so can somebody help me?
View 9 Replies View Related
