No Internet Connectivity (ipv4/ipv6)
Sep 27, 2012
My wifi was working fine a few days ago but i think the windows update has messed up my wifi adapter or connection. I did do a system restore when this happened a few days ago but since the restore is more then 1month old it is no more.So far i have tried the following:restarting/rebooting router,updating/reinstalling drivers,and many other things but nothing seemed to work i dont understand why it is scanning for wifi but on the mapping it says adapter isnt connected.I have shown a few pics to help you:
[spoiler]
[/spoiler]
View 9 Replies
ADVERTISEMENT
Nov 3, 2012
I recently had a sound problem on the internet in google chrome ( no sound at all although the system sound worked fine). Installed shockewave and reinstall chrome on my pc and reboot my pc all remotely. At this stage my problem with chrome was not solved (although the sound in Explorer and firefox worked). After the remote reboot I could not reconnect to the internet. The local area connection status shows that ipv4 & 6 is not connected anymore.
I tried to turn on and off my network adapter, turn off my firewall and connect my pc directly to my cable modem( instead of being connected to my cisco 4200 v2 router) but nothing! I also tried to restart the DNS Client service and the DHCP client service: still nothing. The windows troubleshoot indicate a problem with the network adapter driver but I doubt it. I am running windows 7 ultimate.
View 1 Replies
View Related
Jun 13, 2011
I am using Windows 7 Pro and I can't access the Internet My IPv4 is working but I get this:
IPv4 : Internet
IPv6: No Internet Access
But when I open Browser I get white page but on vBulletin forums I get a 404 error on Every Forum site I go to. So I have a laptop, my brothers computer, xbox360, and my own pc all connected wired to the same router. Recently my PC is unable to get any internet at all from anything, even though it says:
ipv4 internet
ipv6 no internet access
It shows I am receiving and sending packets but not very often. All my other computers on my network except my one PC, I thought maybe it was my integrated network card on the computer but it seems I am not the only one who has had this problem.
View 1 Replies
View Related
Dec 6, 2011
I'll try my best to explain all the issues clearly.from very above downto the third line are:IPv4 connection : not connected (Not OK, it wasn't like that)IPv6 connection : not connected (No public IPv6 connection in China, this is OK)Media State: connectedBut as you can see below, network is OK (Yeah, it seems that). The problem is, this ADSL connection is not showed in 'Avtive Networks'.Most online activities are OK, but somw applications like EA Origin are malfunctioned(I'm sure it is because of the problem in network connection)I've tried reset my winsock, LSP, netsh int ipv4,also reinstalled drivers. All above didn'you may wanna have a look at my Network and Share Center. Here it comes.Area 1 shows that there is no active networks except a 'unidentified network'(this refers to Local Area Conncetion. Since I don't neither have a router nor use LAN, that don't matter). When ADSL was OK, I got a active ADSL network there.
View 2 Replies
View Related
Apr 14, 2011
I have a QNAP NAS and several devices (mostly Windows 7 and iOS devices)The vast majority of my networking setup seems OK - however on one Windows 7 laptop I am having problems. The Laptop can 'see' remote shares, access the Internet and ping other devices on the network - however remote devices cannot ping the laptop. Whilst trying to ascertain what could be the cause I thought that I would ping 'localhost' on the laptop - after all, it should be able to see itself!
[code]....
View 9 Replies
View Related
Jul 16, 2012
I am on an aspire one netbook and can no longer connect to the internet via wireless or a wired connection. I typed ipconfig/all in command prompt and all I got was..:
Host name:
Primary Dns Suffix:
Node Type: Broadcast
IP Routing Enabled: No
WINS Proxy Enabled: No
I do have a desktop and when I ipconfig/all this is what comes up
C:Documents and SettingsAdministrator>ipconfig/all
Windows IP Configuration
Host Name: your-9k1ay6x2a2
Primary Dns Suffix:
Node Type: Hybrid
IP Routing Enabled: No
WINS Proxy Enabled: No
View 3 Replies
View Related
Aug 31, 2011
I have a desktop that is connected to my Belkin router via wire. I have 3 laptops that are all connected to the router wirelessly. All computers have Windows 7 64bit and synched clocks. All are connected to a Home network. All 3 laptops detect that a Homegroup has been created on the wired desktop. I'm using the correct Homegroup password. All computers have discovery on. All computers have IPv4 and Ipv6 running. All services are running. Everything else I've read and tried regarding troubleshooting this issue haven't worked. All computers can see each other on the Network, but can't connect to the Homegroup.
View 9 Replies
View Related
Jan 9, 2012
I have a laptop dell inspiron with W7, I tried to get online but it say no proxy server found. First I thought it might be my internet provider, then I tried with another computer andthe internet worked fine. The net-bios say no while in the other computer it says yes. my computer had a virus but now it completely clean
View 14 Replies
View Related
Mar 29, 2011
first my connection recently started cutting out at random times. Restarting sometimes helped, but disconnecting from the wireless network or rebooting the network adapter didn't help(atheros ar9285). If i go under status in available wireless network it says i have not connected to ipv4 or ipv6. I get this message even when i can get on the net. If i press details nothing shows up. i have pinged Google and have 0% loss he is my ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Mike-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code].....
recently the connection rarely fails, but i bridge my internet with my Xbox 360 so i don't have to pay for a wireless adapter, and when i do that sometimes the connection fails, or when watching netflix through Xbox it says i have lost signal or the signal strength has dropped, when nothing has changed on my laptops internet connection in terms of strength?
View 3 Replies
View Related
Jul 25, 2011
M wireless is flaky to say the least. Realtek 8185 adapter connects sometimes to the interwnt but is painfully slow. Drops connection all the time. My network name changes intermittently between "xxxxxx" and "xxxxxx 2", my network switches between home and public.
View 2 Replies
View Related
Jul 15, 2011
My grandfather called me yesterday and said the other day - his Dell Desktop automatically downloaded Sp1 and Sp2 and once it restarted - he could no longer connect to the internet. *Note - he is connected via a cable to the router* The computer shows he's connected to the router but it cannot connect to the internet.
He tried to use a "restore point" prior to the update, but they were all gone. There are 2 other computers connected to the internet and neither have any issues - one is connected via a cable and the other wireless.
I checked the settings on the router and modem and don't see any "stand-out" type issues. I'm not sure what else to do or check?
View 9 Replies
View Related
May 4, 2012
The Icon that shows my connection status is wrong. e.g: when I'm disconnected it shows I have wired internet connection, and when I have a wireless connection it shows that my internet adapter is off. How can I restore the the original icons' behavior?
View 1 Replies
View Related
Jul 11, 2012
I am having a problem with my Toshiba NB505 Netbook - running Windows 7 Starter. I can connect fine at home to wifi- and also at my local public library. However I was unable to connect at a motel I was at recently and had the same problem when I visited a different local library.To be more exact, I was able to connect ok at these 2 locations - but there was no internet access. From reading, I suspect a 'DNS' issue of some sort, but I don't know how to go about remedying it.
View 9 Replies
View Related
Nov 25, 2009
I'm running 7 Home Premium 64bit on an HP box we got about a month ago.
Lately, when I restart the system, I can't get any internet connection. I can access shares on my home network, so the nic is working and I'm getting an ip address from my router. If I disable and reenable the nic, the internet connection works again. I've tried disabling firewalls and things like that, but the only thing that fixes it is the disable/enable.
The network "troubleshooter" can't see anything wrong, and everything looks like it's configured properly, and nothing has been changes since the initial setup. It worked fine for a couple weeks and now doesn't.
Anyone seen this before? Hints? The disable/enable isn't a big deal but I know at some point I won't be home and my wife will have a problem and I'd rather not deal with that!
View 2 Replies
View Related
Jan 11, 2010
Two days ago I lost internet connectivity suddenly on my desktop (Dell XPS 630i, onboard Nvidia network controller, running windows 7 Home Premium 64bit) and have been unable to restore it. As my laptop (winXP sp3) can still connect to the internet and the router settings have not been changed (Dlink DGL4500), I'm making the assuption that my networking problem resides on my desktop alone. the network adapter gives me a 'limited connectivity' symbol and refuses to connect to my network, even though the router acknowledges the desktop's wired connection. The troubleshooting diagnostic sometimes finds nothing, sometimes finds that the computer is not obtaining a proper IP, and sometimes claims the problem is the router. I've also disabled windows firewall. Throughout this whole process I have been getting a 'Drive Power State Failure' BSOD during restarts (about once every four or five restarts, not consistently).
At first I was unable to replace the drivers or uninstall the adapter through device manager. After reinstalling the drivers using the Nforce 650SLI drivers on their website, I was able to do this, but this did not solve the problem. I also did a windows restore to before the problem occured, also with no luck. I've been through the event log and there are numerous code 5007 errors, which just tell me that the adapter timed out during an operation. I've also read through some forums online and tried several solutions including adding a DhcpConnBcastFlagToggle line into the registry: SOLVED: Network Icon Exclamation: No Internet
View 9 Replies
View Related
Nov 2, 2009
just upgraded my vista 64-bit install to win7 home prem 64-bit.
everything has been working great except for an internet/network issue. at random times, all of a sudden the icon in the tray gets that yellow exclamation point over it and says there's a network issue and no internet available. it's like that until i disable and re-enable the network adapter. there are other systems on the wired router and they're still working fine (vista and xp machines).
the strange thing is it *seems* to only do it when i start doing more than one thing at the same time. i.e. trying to watch Internet while playing an online game. or, downloading a pdf while streaming music. all of a sudden, all internet goes down (other computers still working fine though). once i reset the adapter, all is well.
any ideas here?
View 2 Replies
View Related
Sep 20, 2011
Google Redirect/rootkit infection (See here), I managed to get more or less rid of the thing. After this, I have encountered a "c0000135 %hs is missing" BSOD just after the end of Windows loading that I corrected by modifying the registry following. So now my installation works properly except that no internet connection is possible. I've been trying to do it via ethernet, wifi and mobile phone tethering and it just doesn't works. No IP address displayed, even when I try to force a manual IP (normally everything is sorted out via DHCP) or flush all DHCP/DNS... infos, the diagnostic tool from Windows concludes to a possible defunct driver. I've got a clean installation of W7 x64 (same version, up to date) on another hard drive and of course, everything works well (it's from this installation that I managed to properly clean up the other one and modify the registry). Little detail : I uninstalled Zone Alarm in a not really proper way so it may be something with it too.
View 6 Replies
View Related
Feb 10, 2011
Whatever modem/router I use (except my old 2Wire that died in Dec. 2010), I lose connectivity after I resume/wakeup. The tray icon says "connected", but my browser (Firefox) or my email client (Thunderbird) say "no"!
View 3 Replies
View Related
Nov 1, 2011
I had my HTPC up and running last night, watched a movie, turned it off and went to bed. When I woke up this morning I found that I couldn't get any sound while playing videos through my web browsers, thinking it might be a video card issue I first checked some of my movies, but they also wouldn't play with sound so I deleted my nvidia files and reinstalled them. No luck, on one restart I lost my internet connection with my router. If I look inside the Buffalo's settings, I can see my HTPC's IP address (after running ipconfig /all on the htpc) I did a system restore but that didn't work. I even went so far as to do a clean install of Windows on the HTPC, but that also didn't work. I keep getting the yellow triangle and the message "unknown network" The HTPC tells me to check my router, which I have restarted a number of times unplugging the cable modem and the Buffalo. Turn on the cable modem get it online, then plug in the Buffalo, but nothing works. I have tried switching ethernet cables, ports, but no luck.
View 3 Replies
View Related
Jan 5, 2010
Linksys Wifi router Died, so i am now connecting to the internet Directly from my speedtouch ADSL modem, on every reboot i loose internet connectivity.
It's basically connected to my home network and it's also connected to an unidentified network, to fix i have to disable and re-enable the network card..
Any body else experience this ?
View 9 Replies
View Related
Nov 1, 2011
I had my HTPC up and running last night, watched a movie, turned it off and went to bed. When I woke up this morning I found that I couldn't get any sound while playing videos through my web browsers, thinking it might be a video card issue I first checked some of my movies, but they also wouldn't play with sound so I deleted my nvidia files and reinstalled them. No luck, on one restart I lost my internet connection with my router. If I look inside the Buffalo's settings, I can see my HTPC's IP address (after running ipconfig /all on the htpc) I did a system restore but that didn't work. I even went so far as to do a clean install of Windows on the HTPC, but that also didn't work. I keep getting the yellow triangle and the message "unknown network" The HTPC tells me to check my router, which I have restarted a number of times unplugging the cable modem and the Buffalo. Turn on the cable modem get it online, then plug in the Buffalo, but nothing works. I have tried switching ethernet cables, ports, but no luck.
View 8 Replies
View Related
Aug 22, 2012
I have a few computers that connect via rasdial to a bridged modem. They are dropping off randomly and frequently enough that its a pain to have to reset them manually everytime. How I could write a script or something that would check for internet connectivity and if there is none then it would re dial the pppoe connection?
View 1 Replies
View Related
Jun 2, 2011
We have 2 wireless laptops & 1 hard wired tower (all onWindows 7) in a home network. (All hardware are new this year) The laptops have intermittent internet connectivity yet do not lose the network connections. I have upgraded both the Motorola modem and Linksys router to Windows 7 but it did not resolve the issue.
View 5 Replies
View Related
Nov 15, 2012
Drivers, sound, video and internet connectivity after formatting
View 3 Replies
View Related
Feb 27, 2011
On the right hand side of the taskbar I have the icons for battery life, volume, internet connection, etc. When I used to put the mouse over the internet connection it would show me who I was connected too (SSID) , signal quality, and speed.I began having some issues so I had to remove my Netgear connection and then reconnect.Ever since I did this all that shows up now when I put the mouse over it is now only says: Netgear and Internet access.How do I get the information back. It shows up on my desktop, but not my laptop.
View 7 Replies
View Related
Apr 6, 2011
I'm trying to fix my sisters laptop, which just wont connect to the Internet. I've checked everything I can find. Here's a description of the problem - When looking at the icon in the system tray that shows the connection bars, when I hover over it, it says "not connected - connections are available" . On the related pop-up window It does show my wireless connection. When trying to connect to that wireless network, it eventually says "the connection was unsuccessful - this computer has limited connectivity to "bthomehub.....".
At this point it gives an option to troubleshoot, when I select this it says - "problems found - there might be a problem with the driver for the wireless network connection adapter". If I look at the troubleshooting report from this window it says "windows couldn't automatically bind the IP protocol stack to the network adapter". In 'network and sharing centre' it shows the computer being connected to the homehub, but no connection from homehub to the Internet. Attempted to ping ebay, got this response - "ping request could not find host ebay.com please check then name and try again."
Under wireless connection status it says -
"ipv4 connectivity - no Internet access"
"ipv6 connectivity - no network access"
From looking around on the internet I have tried the following -
- netsh winsock reset catalog
- netsh int ip reset reset.log
- reinstalled drivers for wireless network connection adapter
- checked that windows has no restore points
- tried ipconfig /release at command prompt, got the error "the operation failed as no adapter is in the - - state permissible for this operation"
- tried ipconfig /renew at command prompt, got the error "the operation failed as no adapter is in the - state permissible for this operation"
I tried removing various antivirus/system protection apps...at this point I then got a yellow icon over the connection bars in the system tray, and it now says im 'connected'. but it says 'no internet access'. Its a new laptop running windows 7, it did work fine for a while and then suddenly stopped working while connected to the internet.
View 2 Replies
View Related
Feb 17, 2012
I had Windows 7 32-bit running on a Dell PC. About one week ago, I noticed Internet connectivity was gone and that there was "limited connectivity" as I was now connected to an "unidentified network". The other systems on the network are still connected and working perfect; the problem is isolated to this one system. The network uses a static IP scheme. "IPCONFIG /ALL" shows that the IP is assigned, is included on the correct subnet and has the correct gateway and DNS information. I've tried a host of solutions suggested on forums; from "route delete 0.0.0.0" to disabling my firewall to configuring for a dynamic IP. Nothing has worked. Reluctantly, I resorted to a fresh install as I began to worry that I may have picked something up. I completely wiped the hard drive and did a fresh Windows 7 32-bit installation all only to have the same problem. I assume that the NIC is functioning as it accepts all IP settings.
View 1 Replies
View Related
Feb 7, 2012
I recently installed a new SSD and put my OS on it but every now and then when I boot up it just wont get an internet connection.Once its booted up and I restart Windows though its fine.It doesn't happen everytime but 50% or so I'd say on boot up.I'm thinking its something to do with how fast its booting up now and for some reason my network settings or drivers have not had a chance to load or something and its not getting a handshake with my router.
View 4 Replies
View Related
Aug 19, 2012
I have a brand new desktop running Win 7 64 bit and a laptop running Win 7 Ultimate.
The laptop uses IPv4 to connect, verified via ipconfig. The desktop uses IPv6. Each can see one another on the network, but cannot access one another. If I uncheck IPv4 on the laptop, I can then access the desktop PC, but cannot surf the internet. Once I click it back on, I lose access to the desktop.
I have tried connecting to both with and without homegroups enabled, but I think it's the IPv4 on the laptop that's causing the issue.
How can I get these two to play nice? The laptop hooked up wirelessly with an Aetheros AR5007EG adapter via Realtek PCIe FE Ramily controller. Can I force the laptop to use IPv6 somehow?
View 5 Replies
View Related
Mar 18, 2012
We set up three new terminals this week at the office; they're all running Win 7 Pro 32-bit. I set them all up simultaneously (literally sat at a desk and entered the same keystrokes at each of them), so I don't see any obvious reason that one is behaving differently from the other two. The essential problem is that the terminal doesn't see the Internet.
Here are all the particulars that I think might be interesting, listed in no particular order:
- The terminal ran fine for several hours. Email access, Internet access, from 9 a.m. to 2 p.m. At that point, the user called me to show me a dialog box. I used System Restore to go back in time to 9 a.m. in case the user had somehow managed to do anything (though she's not an admin).
- IPv6 is disabled.
- The workplace uses Static IPs. The IP address is entered correctly in the IPv4 properties (x.x.x.213), but at cmd / ipconfig, I get this result: "Autoconfiguration IPv4 address: 169.254.95.187"
- In Network and Sharing Center, the network (which is only known as Unidentified Network) is set to type Public. When I reset it to type Work and reboot, it resets to type Public.
View 1 Replies
View Related
Mar 9, 2012
i have Windows 7 ultimate 64bit and XP Pro 32bit, and here is my issue: i have a huge network and i have to set my IPs
IPv4:
IP Adress 10.100.150.200
Subnet M: 255.255.128.0
Gateway: 10.100.20.1
DNS: 10.100.0.3
This settings work on all XP OS but doesnt work with all Windows 7. It works for 5-10 min then it says no connection. After set IP it works then doesnt work. If i ping 10.100.20.1 -t it pings as much as i want until i stop and if i restart ping it doesnt work, while first ping i can access to internet after stopping the ping no internet also, That win 7s works with normal ip configurations like: ip:192.168.0.10 gateway: 192.168.0.1
Does windows 7 have problem with different gateway problem? or is it a bug?
View 3 Replies
View Related
