Windows 7 Pro 32 Won't See Network, Won't Honor Static IPv4
Mar 18, 2012
We set up three new terminals this week at the office; they're all running Win 7 Pro 32-bit. I set them all up simultaneously (literally sat at a desk and entered the same keystrokes at each of them), so I don't see any obvious reason that one is behaving differently from the other two. The essential problem is that the terminal doesn't see the Internet.
Here are all the particulars that I think might be interesting, listed in no particular order:
- The terminal ran fine for several hours. Email access, Internet access, from 9 a.m. to 2 p.m. At that point, the user called me to show me a dialog box. I used System Restore to go back in time to 9 a.m. in case the user had somehow managed to do anything (though she's not an admin).
- IPv6 is disabled.
- The workplace uses Static IPs. The IP address is entered correctly in the IPv4 properties (x.x.x.213), but at cmd / ipconfig, I get this result: "Autoconfiguration IPv4 address: 169.254.95.187"
- In Network and Sharing Center, the network (which is only known as Unidentified Network) is set to type Public. When I reset it to type Work and reboot, it resets to type Public.
View 1 Replies
ADVERTISEMENT
Mar 16, 2012
We set up three new terminals this week at the office; they're all running Win 7 Pro 32-bit. I set them all up simultaneously (literally sat at a desk and entered the same keystrokes at each of them), so I don't see any obvious reason that one is behaving differently from the other two. The essential problem is that the terminal doesn't see the Internet. Here are all the particulars that I think might be interesting, listed in no particular order:
- The terminal ran fine for several hours. Email access, Internet access, from 9 a.m. to 2 p.m. At that point, the user called me to show me a dialog box. I used System Restore to go back in time to 9 a.m. in case the user had somehow managed to do anything (though she's not an admin).
- IPv6 is disabled.
- The workplace uses Static IPs. The IP address is entered correctly in the IPv4 properties (x.x.x.213), but at cmd / ipconfig, I get this result: "Autoconfiguration IPv4 address: 169.254.95.187"
- In Network and Sharing Center, the network (which is only known as Unidentified Network) is set to type Public. When I reset it to type Work and reboot, it resets to type Public.
View 1 Replies
View Related
Jul 16, 2012
I am on an aspire one netbook and can no longer connect to the internet via wireless or a wired connection. I typed ipconfig/all in command prompt and all I got was..:
Host name:
Primary Dns Suffix:
Node Type: Broadcast
IP Routing Enabled: No
WINS Proxy Enabled: No
I do have a desktop and when I ipconfig/all this is what comes up
C:Documents and SettingsAdministrator>ipconfig/all
Windows IP Configuration
Host Name: your-9k1ay6x2a2
Primary Dns Suffix:
Node Type: Hybrid
IP Routing Enabled: No
WINS Proxy Enabled: No
View 3 Replies
View Related
Jun 1, 2012
I can't connect to any network without Static IP
View 6 Replies
View Related
Feb 5, 2010
I have Windows 7 Pro and I connect my laptop to many different customer networks. It does a nice job identifying the network and setting a default printer etc. However...
I have one customer with 15 cellular routers that I maintain. Each of them has a static LAN IP with DHCP turned off. As soon as I manually set the static IP Windows Identifies the network and I'm good. Then when I done I need to manually set the static IP back to DHCP. Is there any way for Windows to switch to a static IP that I assign when I plug into these routers?
or
Is there some third party software (free would be nice) that can do that?
My old IBM laptop had some software that did exactly that. I think it was called Access connections.
Any thoughts ideas or suggestions?
View 6 Replies
View Related
Oct 28, 2009
I am trying to create both a static and dynamic network for my computer to choose from when I connect my notebook to one of two locations. I want to create a LAN 1 which picks up the static info specific and an LAN 2 for my dynamic connection.
This is possible to do with operating systems such as ubuntu and it is very easy, however is it even possible with Windows 7? I tried this with Vista as well and failed.
Can anyone help. I am tired of going into the TCP IP settings and reconfiguring this everyday.
View 3 Replies
View Related
Jul 4, 2010
when i try to install Medal of honor pacific assault to my window 7 comp it gets to the second disk and cant install says it cant find the install if you have a salution to my problem please email me at (email removed by moderator. DO NOT post your email address expecting a reply.)
View 3 Replies
View Related
Feb 14, 2012
I just bought a original copy of Medal of Honour Allied Assault. Thats the game from 2002. I installed it on a laptop Windows 7 with Geforce GT 540M. Installing went fine. Intro runs fine. Ingame menu too. But when i start a game, all i can see is black, with green and yellow lines. I can see structures but no textures.
View 2 Replies
View Related
Feb 20, 2009
I Can't install MOH Airborne, when it ask me the cd key, i put it and then he says its incorrect, than i tried to put in compatibility mode, but didn't work as well, what can i do?
i've tried other cd key but didn't work too.
View 8 Replies
View Related
Sep 14, 2011
I cannot run medal of honor limited edition on my pc. Is it supported by windows 7?
View 1 Replies
View Related
Mar 9, 2012
i have Windows 7 ultimate 64bit and XP Pro 32bit, and here is my issue: i have a huge network and i have to set my IPs
IPv4:
IP Adress 10.100.150.200
Subnet M: 255.255.128.0
Gateway: 10.100.20.1
DNS: 10.100.0.3
This settings work on all XP OS but doesnt work with all Windows 7. It works for 5-10 min then it says no connection. After set IP it works then doesnt work. If i ping 10.100.20.1 -t it pings as much as i want until i stop and if i restart ping it doesnt work, while first ping i can access to internet after stopping the ping no internet also, That win 7s works with normal ip configurations like: ip:192.168.0.10 gateway: 192.168.0.1
Does windows 7 have problem with different gateway problem? or is it a bug?
View 3 Replies
View Related
Jan 9, 2012
I have a laptop dell inspiron with W7, I tried to get online but it say no proxy server found. First I thought it might be my internet provider, then I tried with another computer andthe internet worked fine. The net-bios say no while in the other computer it says yes. my computer had a virus but now it completely clean
View 14 Replies
View Related
Dec 6, 2011
I'll try my best to explain all the issues clearly.from very above downto the third line are:IPv4 connection : not connected (Not OK, it wasn't like that)IPv6 connection : not connected (No public IPv6 connection in China, this is OK)Media State: connectedBut as you can see below, network is OK (Yeah, it seems that). The problem is, this ADSL connection is not showed in 'Avtive Networks'.Most online activities are OK, but somw applications like EA Origin are malfunctioned(I'm sure it is because of the problem in network connection)I've tried reset my winsock, LSP, netsh int ipv4,also reinstalled drivers. All above didn'you may wanna have a look at my Network and Share Center. Here it comes.Area 1 shows that there is no active networks except a 'unidentified network'(this refers to Local Area Conncetion. Since I don't neither have a router nor use LAN, that don't matter). When ADSL was OK, I got a active ADSL network there.
View 2 Replies
View Related
Mar 29, 2011
first my connection recently started cutting out at random times. Restarting sometimes helped, but disconnecting from the wireless network or rebooting the network adapter didn't help(atheros ar9285). If i go under status in available wireless network it says i have not connected to ipv4 or ipv6. I get this message even when i can get on the net. If i press details nothing shows up. i have pinged Google and have 0% loss he is my ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Mike-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code].....
recently the connection rarely fails, but i bridge my internet with my Xbox 360 so i don't have to pay for a wireless adapter, and when i do that sometimes the connection fails, or when watching netflix through Xbox it says i have lost signal or the signal strength has dropped, when nothing has changed on my laptops internet connection in terms of strength?
View 3 Replies
View Related
Apr 14, 2011
I have a QNAP NAS and several devices (mostly Windows 7 and iOS devices)The vast majority of my networking setup seems OK - however on one Windows 7 laptop I am having problems. The Laptop can 'see' remote shares, access the Internet and ping other devices on the network - however remote devices cannot ping the laptop. Whilst trying to ascertain what could be the cause I thought that I would ping 'localhost' on the laptop - after all, it should be able to see itself!
[code]....
View 9 Replies
View Related
Aug 19, 2012
I have a brand new desktop running Win 7 64 bit and a laptop running Win 7 Ultimate.
The laptop uses IPv4 to connect, verified via ipconfig. The desktop uses IPv6. Each can see one another on the network, but cannot access one another. If I uncheck IPv4 on the laptop, I can then access the desktop PC, but cannot surf the internet. Once I click it back on, I lose access to the desktop.
I have tried connecting to both with and without homegroups enabled, but I think it's the IPv4 on the laptop that's causing the issue.
How can I get these two to play nice? The laptop hooked up wirelessly with an Aetheros AR5007EG adapter via Realtek PCIe FE Ramily controller. Can I force the laptop to use IPv6 somehow?
View 5 Replies
View Related
Sep 27, 2012
My wifi was working fine a few days ago but i think the windows update has messed up my wifi adapter or connection. I did do a system restore when this happened a few days ago but since the restore is more then 1month old it is no more.So far i have tried the following:restarting/rebooting router,updating/reinstalling drivers,and many other things but nothing seemed to work i dont understand why it is scanning for wifi but on the mapping it says adapter isnt connected.I have shown a few pics to help you:
[spoiler]
[/spoiler]
View 9 Replies
View Related
Nov 3, 2012
I recently had a sound problem on the internet in google chrome ( no sound at all although the system sound worked fine). Installed shockewave and reinstall chrome on my pc and reboot my pc all remotely. At this stage my problem with chrome was not solved (although the sound in Explorer and firefox worked). After the remote reboot I could not reconnect to the internet. The local area connection status shows that ipv4 & 6 is not connected anymore.
I tried to turn on and off my network adapter, turn off my firewall and connect my pc directly to my cable modem( instead of being connected to my cisco 4200 v2 router) but nothing! I also tried to restart the DNS Client service and the DHCP client service: still nothing. The windows troubleshoot indicate a problem with the network adapter driver but I doubt it. I am running windows 7 ultimate.
View 1 Replies
View Related
Oct 9, 2012
How do I set a static IP in windows?
View 10 Replies
View Related
Jun 13, 2011
I am using Windows 7 Pro and I can't access the Internet My IPv4 is working but I get this:
IPv4 : Internet
IPv6: No Internet Access
But when I open Browser I get white page but on vBulletin forums I get a 404 error on Every Forum site I go to. So I have a laptop, my brothers computer, xbox360, and my own pc all connected wired to the same router. Recently my PC is unable to get any internet at all from anything, even though it says:
ipv4 internet
ipv6 no internet access
It shows I am receiving and sending packets but not very often. All my other computers on my network except my one PC, I thought maybe it was my integrated network card on the computer but it seems I am not the only one who has had this problem.
View 1 Replies
View Related
Mar 6, 2011
I have a problem setting up a static ip on my computer, every time i try my computer crashes...
View 9 Replies
View Related
Aug 31, 2011
I have a desktop that is connected to my Belkin router via wire. I have 3 laptops that are all connected to the router wirelessly. All computers have Windows 7 64bit and synched clocks. All are connected to a Home network. All 3 laptops detect that a Homegroup has been created on the wired desktop. I'm using the correct Homegroup password. All computers have discovery on. All computers have IPv4 and Ipv6 running. All services are running. Everything else I've read and tried regarding troubleshooting this issue haven't worked. All computers can see each other on the Network, but can't connect to the Homegroup.
View 9 Replies
View Related
Feb 22, 2011
I set my Windows 7 Pro computer to a static IP. Reboot and the computer can't get to the network, forget the internet. Give it a DHCP IP, then immediately give it the static it had and it works fine. does anyone know a script I can have run at startup that sets the NIC to DHCP, then back to the static I want?
View 7 Replies
View Related
Jun 14, 2009
My sound is acting strange since i've installed Windows 7. (Ex-Vista user). It's making static/crackling sounds when I listen to music, or play games anything that makes sounds is getting disturbed by some kind of interrupting sound that makes crackling sounds..
Things I've tried:
1. I tried switching the cables (bought new ones)
2. I tried different speakers
3. I tried 2 different headphones
4. I tried cleaning my computer (dust)
5. I tried to get rid of any disturbing devices (phones, radios)
6. I tried uninstalling my device (HD audio device) and test it, and reinstall it, and test it again
7. I tried a reset boot (holding button for few seconds)
8. I got rid of my webcam it contained a microphone.
View 5 Replies
View Related
Sep 9, 2011
I'm having an issue with my audio that is driving me up a wall. I'm having that (apparently common) issue of crackling/popping/static-y audio on a Realtek chip. I've tried multiple drivers, from Realtek official to Generic to Vista ones. My latency graph has little to no spiking too! (A problem most people identified in the previous megathread). I know this is a solvable issue because previously I've had it under control. It was just so long ago and I've forgotten.[code] Bios, video card, and OS are up to date. If you need any other information I can get it.
View 1 Replies
View Related
Mar 10, 2011
What is a static IP? are there any benefits from it?
View 5 Replies
View Related
Jun 28, 2012
I have been having for over 2 hours, but to no avail. Ever since I upgraded my previously windows vista computer up to windows 7, I have been having severe problems connecting to my home internet. Now, I cannot change any of my routers settings since they are my step fathers ,and he has a set username and password that I am not allowed to know. All other device in our house will connect just fine to our internet, and my laptop can connect to all other routers fine, this one is the only one I have problems with. What happens is that I get a "connected with limited access" error, and am completely unable to gain any internet access. I managed to set some static IP settings that allow me internet access, yet make things run more slowly and I am unable to connect with people properly in game, such as hosting a terraria server and other things like it. [code]
I have attempted uninstalling and reinstalling the network drivers, and when I troubleshoot problems when I'm not using the static IP, it says there is a problem but gives little to no information, while being unable to automatically solve the problem.Let me make it clear that when I was on windows vista, my connection was fine, and I still connect to every other network I try fine without the static IP. I have attempted to use ipconfig /remove and ipconfig /renew also to no avail, and I am really not sure what else I can do. The static IP allows me connection to the internet, but I am tired of it being slow and giving me trouble with connectivity.
View 9 Replies
View Related
Dec 13, 2011
I have a HP pavilion P6000 with windows 7.About a couple of months after I purchased the computer,I would turn it on and it would just loop the HP splash screen over and over. I called HP and after hours trying this and that I was told to disconnect any plugs from the computer and push the start button for 2 seconds to discharge any static then it would start right up, that worked for a few weeks Started happening over and over, sent the computer back to HP (after hrs. of tech support) they replaced the motherboard. That worked for about a month then same thing happened again.
Sent it back again (after hrs. of tech support) HP replaced something to do with the possessor, work for a while. Now every time I boot up I have the same problem again looping the HP splash screen until I discharge the static, then it works until I shut it off.
View 2 Replies
View Related
Oct 29, 2012
It is randomly changing from a static IP to a DHCP one, Problem is that it's my media server.it also happens for no particular reason, I can reboot 10 times and it'll stay the same, but after a day or two or three even (seems random) it just flops back. i've uninstalled and reinstalled the driver for it and got nothin.
View 1 Replies
View Related
Mar 26, 2012
This isn't a question about a printer sitting somewhere in the house.During tax season we go to the local library to do free tax preparation. We use an online program. We plug in our Ethernet cable to the library's system and each laptop has a static IP to identify it to the network.What we would like to do now is bring in a wireless printer to use for tax forms. Attached directly to this printer is a small router we have used before. But if we simply pressed the print button, I suspect it might look on the libraries wireless network for that printer.Besides assigning a static IP to this printer, I'm thinking we might also have to include the MAC address as well so it finds that router connected to the printer.
View 2 Replies
View Related
Mar 6, 2011
Whenever I try setting a static ip it works fine but other computers can't access my files on the homegroup (and I can't access theres either) , they can join alright and access each others fine.
View 1 Replies
View Related
