No Internet Connectivity At Some Wifi Locations?
Jul 11, 2012
I am having a problem with my Toshiba NB505 Netbook - running Windows 7 Starter. I can connect fine at home to wifi- and also at my local public library. However I was unable to connect at a motel I was at recently and had the same problem when I visited a different local library.To be more exact, I was able to connect ok at these 2 locations - but there was no internet access. From reading, I suspect a 'DNS' issue of some sort, but I don't know how to go about remedying it.
View 9 Replies
ADVERTISEMENT
Dec 21, 2010
I have Windows 7 on a Dell Inspiron 1545. Most of the time when I put my laptop to sleep and restart it Wifi network connectivity is lost and I have to click the 'Wifi Signal' icon in the system taskbar and click on my network name and click connect to regain connectivity. I have gone to 'Power Management' tab and cleared 'Allow Windows to turn off this device to save power' option as suggested by most posts but it has done nothing to help me. But sometimes even after a long sleep the laptop immediately connects back to the network and sometimes even if I just close the lid and open it after a few seconds network connectivity is lost.
View 15 Replies
View Related
Jul 15, 2011
My grandfather called me yesterday and said the other day - his Dell Desktop automatically downloaded Sp1 and Sp2 and once it restarted - he could no longer connect to the internet. *Note - he is connected via a cable to the router* The computer shows he's connected to the router but it cannot connect to the internet.
He tried to use a "restore point" prior to the update, but they were all gone. There are 2 other computers connected to the internet and neither have any issues - one is connected via a cable and the other wireless.
I checked the settings on the router and modem and don't see any "stand-out" type issues. I'm not sure what else to do or check?
View 9 Replies
View Related
May 4, 2012
The Icon that shows my connection status is wrong. e.g: when I'm disconnected it shows I have wired internet connection, and when I have a wireless connection it shows that my internet adapter is off. How can I restore the the original icons' behavior?
View 1 Replies
View Related
Sep 27, 2012
My wifi was working fine a few days ago but i think the windows update has messed up my wifi adapter or connection. I did do a system restore when this happened a few days ago but since the restore is more then 1month old it is no more.So far i have tried the following:restarting/rebooting router,updating/reinstalling drivers,and many other things but nothing seemed to work i dont understand why it is scanning for wifi but on the mapping it says adapter isnt connected.I have shown a few pics to help you:
[spoiler]
[/spoiler]
View 9 Replies
View Related
Nov 25, 2009
I'm running 7 Home Premium 64bit on an HP box we got about a month ago.
Lately, when I restart the system, I can't get any internet connection. I can access shares on my home network, so the nic is working and I'm getting an ip address from my router. If I disable and reenable the nic, the internet connection works again. I've tried disabling firewalls and things like that, but the only thing that fixes it is the disable/enable.
The network "troubleshooter" can't see anything wrong, and everything looks like it's configured properly, and nothing has been changes since the initial setup. It worked fine for a couple weeks and now doesn't.
Anyone seen this before? Hints? The disable/enable isn't a big deal but I know at some point I won't be home and my wife will have a problem and I'd rather not deal with that!
View 2 Replies
View Related
Jan 11, 2010
Two days ago I lost internet connectivity suddenly on my desktop (Dell XPS 630i, onboard Nvidia network controller, running windows 7 Home Premium 64bit) and have been unable to restore it. As my laptop (winXP sp3) can still connect to the internet and the router settings have not been changed (Dlink DGL4500), I'm making the assuption that my networking problem resides on my desktop alone. the network adapter gives me a 'limited connectivity' symbol and refuses to connect to my network, even though the router acknowledges the desktop's wired connection. The troubleshooting diagnostic sometimes finds nothing, sometimes finds that the computer is not obtaining a proper IP, and sometimes claims the problem is the router. I've also disabled windows firewall. Throughout this whole process I have been getting a 'Drive Power State Failure' BSOD during restarts (about once every four or five restarts, not consistently).
At first I was unable to replace the drivers or uninstall the adapter through device manager. After reinstalling the drivers using the Nforce 650SLI drivers on their website, I was able to do this, but this did not solve the problem. I also did a windows restore to before the problem occured, also with no luck. I've been through the event log and there are numerous code 5007 errors, which just tell me that the adapter timed out during an operation. I've also read through some forums online and tried several solutions including adding a DhcpConnBcastFlagToggle line into the registry: SOLVED: Network Icon Exclamation: No Internet
View 9 Replies
View Related
Nov 2, 2009
just upgraded my vista 64-bit install to win7 home prem 64-bit.
everything has been working great except for an internet/network issue. at random times, all of a sudden the icon in the tray gets that yellow exclamation point over it and says there's a network issue and no internet available. it's like that until i disable and re-enable the network adapter. there are other systems on the wired router and they're still working fine (vista and xp machines).
the strange thing is it *seems* to only do it when i start doing more than one thing at the same time. i.e. trying to watch Internet while playing an online game. or, downloading a pdf while streaming music. all of a sudden, all internet goes down (other computers still working fine though). once i reset the adapter, all is well.
any ideas here?
View 2 Replies
View Related
Sep 20, 2011
Google Redirect/rootkit infection (See here), I managed to get more or less rid of the thing. After this, I have encountered a "c0000135 %hs is missing" BSOD just after the end of Windows loading that I corrected by modifying the registry following. So now my installation works properly except that no internet connection is possible. I've been trying to do it via ethernet, wifi and mobile phone tethering and it just doesn't works. No IP address displayed, even when I try to force a manual IP (normally everything is sorted out via DHCP) or flush all DHCP/DNS... infos, the diagnostic tool from Windows concludes to a possible defunct driver. I've got a clean installation of W7 x64 (same version, up to date) on another hard drive and of course, everything works well (it's from this installation that I managed to properly clean up the other one and modify the registry). Little detail : I uninstalled Zone Alarm in a not really proper way so it may be something with it too.
View 6 Replies
View Related
Feb 10, 2011
Whatever modem/router I use (except my old 2Wire that died in Dec. 2010), I lose connectivity after I resume/wakeup. The tray icon says "connected", but my browser (Firefox) or my email client (Thunderbird) say "no"!
View 3 Replies
View Related
Nov 1, 2011
I had my HTPC up and running last night, watched a movie, turned it off and went to bed. When I woke up this morning I found that I couldn't get any sound while playing videos through my web browsers, thinking it might be a video card issue I first checked some of my movies, but they also wouldn't play with sound so I deleted my nvidia files and reinstalled them. No luck, on one restart I lost my internet connection with my router. If I look inside the Buffalo's settings, I can see my HTPC's IP address (after running ipconfig /all on the htpc) I did a system restore but that didn't work. I even went so far as to do a clean install of Windows on the HTPC, but that also didn't work. I keep getting the yellow triangle and the message "unknown network" The HTPC tells me to check my router, which I have restarted a number of times unplugging the cable modem and the Buffalo. Turn on the cable modem get it online, then plug in the Buffalo, but nothing works. I have tried switching ethernet cables, ports, but no luck.
View 3 Replies
View Related
Jan 5, 2010
Linksys Wifi router Died, so i am now connecting to the internet Directly from my speedtouch ADSL modem, on every reboot i loose internet connectivity.
It's basically connected to my home network and it's also connected to an unidentified network, to fix i have to disable and re-enable the network card..
Any body else experience this ?
View 9 Replies
View Related
Nov 1, 2011
I had my HTPC up and running last night, watched a movie, turned it off and went to bed. When I woke up this morning I found that I couldn't get any sound while playing videos through my web browsers, thinking it might be a video card issue I first checked some of my movies, but they also wouldn't play with sound so I deleted my nvidia files and reinstalled them. No luck, on one restart I lost my internet connection with my router. If I look inside the Buffalo's settings, I can see my HTPC's IP address (after running ipconfig /all on the htpc) I did a system restore but that didn't work. I even went so far as to do a clean install of Windows on the HTPC, but that also didn't work. I keep getting the yellow triangle and the message "unknown network" The HTPC tells me to check my router, which I have restarted a number of times unplugging the cable modem and the Buffalo. Turn on the cable modem get it online, then plug in the Buffalo, but nothing works. I have tried switching ethernet cables, ports, but no luck.
View 8 Replies
View Related
Aug 22, 2012
I have a few computers that connect via rasdial to a bridged modem. They are dropping off randomly and frequently enough that its a pain to have to reset them manually everytime. How I could write a script or something that would check for internet connectivity and if there is none then it would re dial the pppoe connection?
View 1 Replies
View Related
Jun 2, 2011
We have 2 wireless laptops & 1 hard wired tower (all onWindows 7) in a home network. (All hardware are new this year) The laptops have intermittent internet connectivity yet do not lose the network connections. I have upgraded both the Motorola modem and Linksys router to Windows 7 but it did not resolve the issue.
View 5 Replies
View Related
Nov 15, 2012
Drivers, sound, video and internet connectivity after formatting
View 3 Replies
View Related
Sep 6, 2011
I'm trying to fix my girlfriend's Windows 7 laptop after she had a virus/malware infection. I'm pretty sure we've successfully cleared the virus (an updated/full scan with Malwarebyte's Anti-Malware in safe mode comes up clean). However, we have had no Internet access since the infection. The wireless router/connection itself is fine (I connect to it daily with my laptop, as I am to write this post) but her laptop won't connect to it, we can't browse any web pages.I may have made the problem worse in trying to resolve it. I stupidly followed the advice on a forum for some registry edits for Windows XP--deleting WinSock and WinSock2 from the registry and then restarting the computer in hopes they'd re-register themselves. Unfortunately, WinSock2 re-appeared but WinSock did not. I'm wondering if this has created a new problem (or compounded the problems we were already having).In diagnostics, we currently get the following report: "Wireless Network Connection doesn't have a valid IP configuration." I just ran an ipconfig in the command prompt and got the following results:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Elizabeth-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 2 Replies
View Related
Feb 27, 2011
On the right hand side of the taskbar I have the icons for battery life, volume, internet connection, etc. When I used to put the mouse over the internet connection it would show me who I was connected too (SSID) , signal quality, and speed.I began having some issues so I had to remove my Netgear connection and then reconnect.Ever since I did this all that shows up now when I put the mouse over it is now only says: Netgear and Internet access.How do I get the information back. It shows up on my desktop, but not my laptop.
View 7 Replies
View Related
Apr 6, 2011
I'm trying to fix my sisters laptop, which just wont connect to the Internet. I've checked everything I can find. Here's a description of the problem - When looking at the icon in the system tray that shows the connection bars, when I hover over it, it says "not connected - connections are available" . On the related pop-up window It does show my wireless connection. When trying to connect to that wireless network, it eventually says "the connection was unsuccessful - this computer has limited connectivity to "bthomehub.....".
At this point it gives an option to troubleshoot, when I select this it says - "problems found - there might be a problem with the driver for the wireless network connection adapter". If I look at the troubleshooting report from this window it says "windows couldn't automatically bind the IP protocol stack to the network adapter". In 'network and sharing centre' it shows the computer being connected to the homehub, but no connection from homehub to the Internet. Attempted to ping ebay, got this response - "ping request could not find host ebay.com please check then name and try again."
Under wireless connection status it says -
"ipv4 connectivity - no Internet access"
"ipv6 connectivity - no network access"
From looking around on the internet I have tried the following -
- netsh winsock reset catalog
- netsh int ip reset reset.log
- reinstalled drivers for wireless network connection adapter
- checked that windows has no restore points
- tried ipconfig /release at command prompt, got the error "the operation failed as no adapter is in the - - state permissible for this operation"
- tried ipconfig /renew at command prompt, got the error "the operation failed as no adapter is in the - state permissible for this operation"
I tried removing various antivirus/system protection apps...at this point I then got a yellow icon over the connection bars in the system tray, and it now says im 'connected'. but it says 'no internet access'. Its a new laptop running windows 7, it did work fine for a while and then suddenly stopped working while connected to the internet.
View 2 Replies
View Related
Feb 27, 2012
I have - A Laptop with Windows 7 UltimateA Linksys Wireless Router with ports which are all Ethernet ports (i.e. no USB ports).A Tata Photon Plus (which is basically a Wireless USB Modem)I have been trying to setup a wireless network to have my handheld devices connect to the internet.I have - Connected the Ethernet port of my laptop to one of the Ethernet Ports of my Wireless Router.I have connected my Wireless USB Modem to my laptop (as my Router does not have a USM port).My Questions While I have been able to setup the Wireless Network, the Network shows "No Internet Access". Can someone help me with how to bring in Internet to the Wireless Network? I am sorry but I don't have enough networking acumen which would enable me to do this without assistance.
View 9 Replies
View Related
Feb 17, 2012
I had Windows 7 32-bit running on a Dell PC. About one week ago, I noticed Internet connectivity was gone and that there was "limited connectivity" as I was now connected to an "unidentified network". The other systems on the network are still connected and working perfect; the problem is isolated to this one system. The network uses a static IP scheme. "IPCONFIG /ALL" shows that the IP is assigned, is included on the correct subnet and has the correct gateway and DNS information. I've tried a host of solutions suggested on forums; from "route delete 0.0.0.0" to disabling my firewall to configuring for a dynamic IP. Nothing has worked. Reluctantly, I resorted to a fresh install as I began to worry that I may have picked something up. I completely wiped the hard drive and did a fresh Windows 7 32-bit installation all only to have the same problem. I assume that the NIC is functioning as it accepts all IP settings.
View 1 Replies
View Related
Feb 7, 2012
I recently installed a new SSD and put my OS on it but every now and then when I boot up it just wont get an internet connection.Once its booted up and I restart Windows though its fine.It doesn't happen everytime but 50% or so I'd say on boot up.I'm thinking its something to do with how fast its booting up now and for some reason my network settings or drivers have not had a chance to load or something and its not getting a handshake with my router.
View 4 Replies
View Related
Dec 18, 2011
I am an owner of a dell studio 17 laptop. It was pre installed with windows vista, 2 days back I upgraded my laptop to windows 7 ultimate x64. Since then I am unable to connect to my internet.
View 9 Replies
View Related
Jul 29, 2012
Currently my internet is not working but was fine for the pass few weeks. The problem im having is that the wifi works for Iphone but not my laptop. Im able to connect to my housemate wifi , just now the free wifi that was provided by the owner. Is there any reason why my laptop wifi isnt working for this connection but works for other wifi connection ?
View 49 Replies
View Related
Oct 24, 2012
I have a Dell Inspiron 15 Laptop. It always works great except for one problem I have had from the beginning. When I am at some place like Starbucks or the Library and want to use the internet, my computer will show me the list of "Wireless Network Connections" available and I can click on the library for example and it will connect just fine. It will show the word "Connected" under the "Library" connection. But it will also say "No Internet Access". This happens anytime I go to a free wifi hotspot. I have learned that there is an additional login required. So for the library I would have to pull up my browser, go to their website and find their login. The problem with this is that sometimes you don't know the URL to their website so you can't login. there is some setting on my computer I can change to make the login screen come up automatically or even bypass this option. When I use these wifi hotspots with my phone or Google Nexus I never have this problem.
View 1 Replies
View Related
Jun 1, 2012
I have two operating systems installed on my Sony Vaio VPCF115FG, Windows 7 Home Premium and Windows 8 Consumer Preview.
Wi-Fi is working fine on both, however, LAN connections are only working on Windows 8 but not Windows 7. It reads the LAN connection in Windows 7 but it does not actually connect to the internet. I honestly tried everything, including uninstalling the LAN driver and reinstalling it, no use.
This is an error I received before: [URL]
View 2 Replies
View Related
Jan 1, 2012
I connect to my home wifi and it says connected, but there is no internet connection.I noticed that network adapter shows "wireless network connection 2" with that "2" at the end of name. I guess there is a problem. If I rename it to just "wireless network connection" it says it already exists. But cannot see it, and use it! Can anyone tell me how to reset it or somehow switch to "wireless network connection" without "2"?
Also when I type ipconfig/all I get this:
------------------
C:Usersuser>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : user-PC
[code]....
View 9 Replies
View Related
Jun 24, 2012
I am unable to connect to the internet in wireless mode. It shows the available networks, but does not connect when I type in my router password. I have tried everything I know of. Uninstalled/Reinstalled the driver - I have an Intel 5100 AGN wireless driver installed. I disabled and enabled it. Didn't work. Running command prompt and typing in ipconfig /all doesn't detect my adapter device - says "Media Disconnected".I also did these by running command prompt as an administrator: Reset WINSOCK entries to installation defaults: netsh winsock reset catalogReset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.logReset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.logand restarted my computer. I have a Dell Studio 1555 with Win 7 (32-bit) Professional.What am I supposed to do now? Please help!PS: I know this is a problem with my Windows as the wireless works seamlessly in my Ubuntu.
View 2 Replies
View Related
Aug 5, 2012
The system seems stable just being on, and the minute I turn it on, I get the BSOD.This is a Gateway T-1631 laptop that use to have Vista. I upgraded to seven, but wiped the computer out to have a fresh install. Ever since the fresh install, it hasn't been working right and crashes consistently.
View 4 Replies
View Related
Oct 1, 2010
My wifi at work will recognize the wireless network and says it's connected. Yet there is no internet. So I use the Ethernet cable and internet works. My wifi connects immediately on my home wifi router with no issues. I had wireless working flawlessly last week, but all this week it won't connect.
View 4 Replies
View Related
Feb 3, 2011
I have a question about sharing my Internet. Ok my internet provider sends me some analogue signals, my modems gets them, converts them to digital signals and then, sends this Connection to where it should go (I mean I can use this connection using e.g. wifi). I have a vpn connection. I wanna use it on my mobile. My mobile doesn't support vpn configuration. So somehow I should send the vpn connection from my pc and modem. How can I share the internet I am using in my pc using my WiFi modem?
View 2 Replies
View Related