Error Is "no Network Access"" And "Windows Was Unable To Connect To "SSID""?
Aug 25, 2012
I have just set up a new ASUS zenbook prime. I set up the wireless network 2 nights ago and had no problems. I then installed Microsoft Office 2010 and the problems started. I started getting errors about ATK0100 driver missing and the wireless function stopped working. I re-installed the ATK0100 driver and that stoppped that error message. I then thought that the wireless adapter may have also been affected by the Offce install so I removed then re-installed that one (Intel Centrino(R) Advanced-N 6235). I also unistalled Office but still hasn't fixed the problem. I can connect via a 4G USB wireless adapter but can't connect to my home wireless modem. I have 2 other laptops (windows7 and vista) accessing the wireless modem. When I try to connect the error is "no network access"" and "Windows was unable to connect to "SSID"". I have tried removing the wireless network and adding it again but to no avail. I have also used the troubleshooter but it can't find anything wrong either. The wireless function is on and I'm not sure what else to try? I have trawled through lots of forums and it seems like quite a few people have the same problem but I haven't yet found an answer.
View 9 Replies
ADVERTISEMENT
Nov 10, 2011
Last night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.
View 2 Replies
View Related
May 25, 2012
just built my computer and when I tried to connect it to the internet through an ethernet cable it created a broadband network connection. Then when I try to connect it tells me the modem had encountered a problem it's error 651 and I can't connect to
View 1 Replies
View Related
Mar 5, 2011
Can anyone advise how I would go about fixing this. I am trying to connect to a network (I have a dell running on windows 7) and it keeps telling me that windows is unable to connect to the network-this is before I can even enter the security key. I know it is not a problem with the wireless because other people are able to connect to it fine.
View 2 Replies
View Related
Mar 29, 2011
I recently moved from an XP machine to Windows 7 Home premium and I am now unable to connect to network shares, printers, etc at work. This is a laptop that I use both at home and at work and it's not in the domain (neither was the XP machine). On the XP machine I just mapped network drives and printers using the server name and then used my network credentials (domainusername and password). The Windows 7 machine is in the network (it's wired through ethernet) and I can access the internet through our proxy server. When I look under "Network", I see all of the servers and clients on the network, but when I try to connect to one of them, I am prompted for login/password- once I enter these, it says "Logon failure: unknown username or bad password".
View 6 Replies
View Related
Oct 16, 2011
In desperation, all boffins, geeks and wizards at Microsoft � I need help. I have had a home network now for at least 10 years and for the first time, I just cannot get it to work. That is since I upgraded to supa dupa Win 7 Prof. I have three machines in the network, two laptops and one desktop. Printers, backup drives etc all attached to the desktop. Desktop and one laptop running Win 7 Prof. One laptop running Xp.
In a nutshell, I have tried everything on this website and others and nothing works. I am no idiot around this stuff and I am simply dumb founded. I have set up and recreated Homegroup, changed settings, disabled my Eset firewall as well as win firewall. You name it I have tried it � to no avail. After doing some research it appears many, many people have a similar problems. Machine can see each other, but come hell or high water, cannot access. I am soooo disappointed with this. Please tell me there is something different that I can try. At this point, all my hardware is locked out since upgrading to Win 7.
View 3 Replies
View Related
Mar 11, 2011
I have a Wifi router and a Windows 7 desktop with USB Wifi and Virtual Wifi adapter running. how to create a meshed Wifi network with one single ssid/key?
View 1 Replies
View Related
Jan 11, 2012
my pc is unable to connect wireless network eventhough connections are available.it shows that there is a problem in network adaptor and windows cannot connect the hidden network.
View 1 Replies
View Related
Jan 30, 2009
Has anyone got Juniper Networks Network Connect working? I was able to install Juniper Network Connect, but the Juniper "host checker" refuses connection, because OS is wrong: check_os returns false. Any idea how to work around?
I checked the FAQ from Juniper, but they are saying "we will support when Windows 7 is GA".
View 5 Replies
View Related
Jul 15, 2011
the icon says i am not connected and there is a network available but i am actually connected!
View 9 Replies
View Related
Apr 9, 2011
Just started having problems connection to any network or internet. Have new lappy that was working great until today. I am going out of town for a while and I was setting up my Slingbox. Somewhere along the line, I lost ANY connections, even to the router.
Have tried 3 different restore points. Can connect with wire to the router & get internet. HP, 64 bit.
View 9 Replies
View Related
Dec 19, 2011
I've been having connection problems for the last year, it's really annoying and so hard to understand whats happening. The internet connection is my dads, he lives in the garage beside me. He's with talk-talk fibre optic. The small modem type thing that connects is in the garage along with the main router that connects to the small thing, not sure what this is but it obviously connects to the fibre optic.His PC is connected to the router by wire, there is then a wire that runs from that router up through the garage and into the house through the wall in one of the bedrooms, this is were I have a router or two, (i've tried two routers with mixed results.) I'm connected via wireless through the second router in a room upstairs and get full signal when connected. I have a belkin 54g and a netgear dg834n. Now this morning after leaving my computer on all night, i woke up and it wasn't connected. Although this happens everyday when i turn my laptop on, i have to connect via wireless to the main router in the garage, then reconnect to the router up stairs to get the connection to come on. This time round it wont work at all. The netgear gives me - "Windows Networking TroubleShoot Error: The connection between your access point, router, or cable modem and the internet is broken."
View 2 Replies
View Related
Oct 25, 2009
Windows 7 install went perfect. Loving it so far.
Came home and hooked up to wireless network. I can see my server and the 5 shared folders available. But I am unable to connect to any of them. Each time it says
"Windows cannot access serverstorage"
"You do not have permission to access server.
Any ideas?
FYI Yes I have network discovery on etc etc. These ARE password protected folders, but it's not even prompting me for a user/pass. When I attempt to Create a network drive and use different credential which is an account on that machine it says "it's currently mapped using a different user-name and password".
View 2 Replies
View Related
Nov 15, 2009
Have a brand new pavailion quad cord windows 7 home premium 64bit. i also purchased a usb wireless adapter[url]...
this adapter was working fine for a few hours. the internet connection is cable, the adapter gets about two bars of connectivity, and now when i try to connect to network i get unable to connect to network. i have removed the wirless network, have added it back, entered the security key and nothing. i have a netgear wireless router. not sure what the deal is. i have made sure the power settings on the adapter are off, and this adapter doesnt seem to have the sleep mode option on it. windows 7 also found the drivers automatically. the machine is brand new, other machines/devices on in the house get to the internet just fine.
View 6 Replies
View Related
Jan 19, 2012
I have a hp pavilion windows 7 home premium that will not connect to the internet. When i ping google.com i get "ping request could not find host google.com. please check name and try again.". however, when i ping 74.125.224.176 i get "PING: transmit failed. General failure. 100% loss". I have also tried to connect while in safe-mode but not luck and i also reset all setting in IE. I have two other computers connecting to my 2wire modem and they are both working fine. The last attempt was installing a new network pci card. I have also swapped out the cable but i still get "Identifying... No internet access."
View 7 Replies
View Related
Jan 19, 2012
I have a hp pavilion windows 7 home premium that will not connect to the internet. When i ping google.com i get "ping request could not find host google.com. please check name and try again.". however, when i ping 74.125.224.176 i get "PING: transmit failed. General failure. 100% loss". I have also tried to connect while in safe-mode but not luck and i also reset all setting in IE. I have two other computers connecting to my 2wire modem and they are both working fine. The last attempt was installing a new network pci card. I have also swapped out the cable but i still get "Identifying... No internet access."
View 5 Replies
View Related
Nov 2, 2011
When i am in sch, i can use my sch wireless.However, when i reached home whenever i try to connect to my wireless network but its say unidentified network. My sis have no issue with the internet.The problem is solved whenever i restart my modem. Anyone here can kindly tell me how to solve this problem? I am running on windows 7 professional with my sch domain connected to my com.
View 2 Replies
View Related
Jan 20, 2012
I have a hp pavilion windows 7 home premium that will not connect to the internet. When i ping google.com i get "ping request could not find host google.com. please check name and try again.". however, when i ping 74.125.224.176 i get "PING: transmit failed. General failure. 100% loss". I have also tried to connect while in safe-mode but not luck and i also reset all setting in IE. I have two other computers connecting to my 2wire modem and they are both working fine. The last attempt was installing a new network pci card. I have also swapped out the cable but i still get "Identifying... No internet access."
View 1 Replies
View Related
Jun 6, 2012
I am having problems with my daughter's laptop accessing the internet with her wifi, She accidentally reset her laptop back to factory settings. She also didn't make any recovery disks. The problem is now the laptop keeps asking for a network user name/Password when she tries to access the internet. I have researched this issue but to no avail. I am curious as to how to resolve this issue. I feel the only way may be to reset the wireless router back to factory settings and start again.
View 9 Replies
View Related
Jul 19, 2012
My laptop suddenly stopped being able to connect to the network in my house and for that obviously it doesn't have any internet. It doesn't work either by connecting a cable or trying to use the wireless, here are the detaills for each case: When I connect the cable, the laptop detects it, but doesn't detect any network, it doesn't seem to even be trying. I checked on the network adapters, and it clearly says "enabled" when connected and when disconnected it changes to "No network cable plugged in". When I try to connect to my network, it always ends up saying "Limited access", when I tried troubleshooting, it said that there may be an error with the network drivers, I tried the fix there, and then it says that there must be an error with the network adapters.
Here's what I have tried so far:
-Reinstalling the devices and drivers, when I check them in device manager, it says that both the wireless and network driver are working properly.
-I tried resetting the router.
-Tried resetting the bios of the computer to it's factory ones.
- Tried resetting IPv4 and IPV6, along with the IP/TCP using the command prompt, still no go.
When I try to ipconfig /release or ipconfig /renew, I get an error saying the next thing: "An error ocurred while releasing interface Loopback Pseudo-Interface 1: they System cannot find the file specified. The operation failed as no adapter is in the state permissible for this operation."
Here is my info when using ipconfig /all:
Host name... : Jorge -NB
Primary Dns Suffix : Empty
Node Type : Hybrid
IP Routing Enabled: No
Wins Proxy Enabled: No
Tunnel adapter teredo tunneling pseudo-interface:
Media state: Media disconnected
Connection-specific DNS suffix: empty
Description: Teredo Tunneling Pseudo-interface
Physical Adress: 00-00-00-00-00-00-00-E0
DHCP Enabled: No
Autoconfiguration enabled: Yes
View 2 Replies
View Related
Oct 22, 2012
I have a fairly new Toshiba Satellite P755 laptop and just started having an issue connecting to my Netgear wireless internet network since yesterday. The issue is that every time I turn on my laptop after it was off or hibernated my computer won't connect to my wireless network but I do see it available to connect to. When I try to connect it won't work unless I reset or unplug the router and plug it in again (Windows Diagnostic Tool says check router access points). Once I do that and wait a couple minutes I can connect to my network again. I have a Realtek RTL8188CE Wireless card and made sure my drivers were up to date. I have tried unchecking the option under Device Manager to not use it if the battery is low and that didn't work. I also tried to system restore and when I did that I got the following error: (0xc0000022) which says an unspecified error occurred and my files and settings were not changed. I have AVG Free 2013 and haven't made any new changes or updates recently.
View 6 Replies
View Related
Jan 2, 2012
Yesterday I moved into a new apartment in Vancouver, Canada. Several friends came up with me to help me move in. My friends were able to connect to the wireless network. However, as soon as I tried connecting to the network, the wireless signal began to appear and disappear rapidly for everyone connected, effectively cutting off wireless access. This problem only occurs when I sign on. Furthermore.
[code]....
View 3 Replies
View Related
Sep 4, 2009
When i try and access a network share windows seems to be searching for files on my HD. Also i cant find the "display run command " option in start menu properties.
View 6 Replies
View Related
Dec 14, 2012
as when i connect to the internet i cannot access to the 3G network but only to a 2G network.
View 1 Replies
View Related
Apr 29, 2011
why, when connecting wirelessly under Windows 7, to a wireless access point I am unable to change the "Network Type" from Public to Home, thus no connection to the Internet is allowed? I cannot change any of the parameters of the network at all. Under XP on the same network I have no problems at all.I have set up three access points by simply adding additional wireless modems (of the same brand as the primary modem), turning off DCHP and U PnP and assigning a unique IP address, to avoid DCHP conflicts (as I understood it).Which change would I have to make to the access points such that Windows 7 fully recognises each access point and allow me to assign them to type "Home"?
View 3 Replies
View Related
Sep 1, 2009
I have an intermittent problem with networking my desktop machine to my laptop. Sometimes after I hibernate my laptop and then wake it up, I am unable to access my shared drives on my laptop from my desktop. I am always able to go the other way (access shared drives on desktop from laptop. When it does this, even reboots of both machines don't help.
I just asked Windows 7 to diagnose and I get this. Usually after "messing" with the network settings, log offs, reboots, who knows, it usually starts working both ways again until some later hibernation restart of laptop. I wish I could pinpoint some common things that cause it but I just can't figure it out. Any ideas?
View 9 Replies
View Related
Feb 8, 2012
I have been using my home internet in my new place for a couple of weeks fine, yesterday morning when I tried it it had the limited access yellow triangle and wouldn�t connect.I reset the router and connected to the wifi on my iphone which worked fine, I checked the DNS numbers were the same as on my iphone which they were and I had not changed any settings. I spent the entire day yesterday online looking for solutions, I�ve reset the adapter, disabled it etc, set the ip and dns to automatic and back again etc etc.
When my wifi tries to connect to my home internet it takes a LONG time to identify and then identifies it either as an unidentified network and/or public. Even when I change it to home it changes it back to public or just doesn�t let me change it to home and says try again later.
Ps- I just tried disabling then re-enabling the protocol 6 on the wifi which isn�t working and it just said �in order to configure TCP/IP, you must install and enable a network adapter card. But then it just let me configure it and is still connected but with limited access and public network.
View 9 Replies
View Related
Apr 21, 2011
Getting an error when trying to connect to a network drive 'An error occured while re-connecting.No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept'Now this has been setup with a local folder on the server shared and is being mapped to 19 people on the network.I looked under advanced permissions and can see max allowed connections set to 20, there are 19 people in the company but the problem lies that some bring in their laptops and attempt to connect to to the existing shares as well which is obviously causing problems as I can only allow max '20' connections to this mapped folder.Is there any fix that will allow Win 7 Pro x64 I can enter in the registry to allow more connections?
OS:Running Win 7 Pro x64
View 4 Replies
View Related
Apr 21, 2011
Getting an error when trying to connect to a network drive 'An error occured while re-connecting.No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept'Now this has been setup with a local folder on the server shared and is being mapped to 20 people on the network.I looked under advanced permissions and can see max allowed connections set to 20, there are 19 people in the company but the problem lies that some bring in their laptops and attempt to connect to to the existing shares as well which is obviously causing problems as I can only allow max '20' connections to this mapped folder.
View 8 Replies
View Related
Nov 11, 2010
For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils
Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes
The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.
View 9 Replies
View Related
Nov 17, 2011
i recieved my new lenovo z570 ideapad yesterday...i'll just put some of the spec down incase you want to know.
proccessor: intel i5 (second gen)
graphics: nvidia geforce
os: windows 7 64bit
yadayadayada...
anyway, after charging it up and turning it on, i started to install programmes and other bits and bobs. e.g ituens, flash player. just the usual essentials. i used the laptop to watch videos on Internet, genenral browing such as facebook, so in short, the internet was working fine. just before i went to bed that night i installed avg security (free version) and ran a full scan. when the scan finished, i put the laptop into hibernate, and went to sleep! happy in the knowledge my new gizmo was running smoothly!
just before i woke up i heard the laptop turn off as it had run out of charge. so i plugged it in and charged it up, then turned it on. this is where the problem starts...i connected via wifi however the logo at the bottom right of the screen showed the signal strength meter on empty, with a yellow star covering it. i clicked the icon, and it said, 'not connected, connections are available' and below shows im connected with 5/5 signal strength, but on 'limited access'.
1) there might be a problem with the driver for the local area connection adapter
2)there might be a problem with the driver for the wireless network connection adapter
there are 28 updates, but im unable to update them as i have no internet connection. i also cant connect via the ethernet cable.i cant roll back the drivers as there are no previously installed ones, and i cant update them as i am already up to date.my other laptop (acer aspire 5630 running on vista) works perfectly fine using wifi and the ethernet cable, so i honestly dont know whats wrong. after reading things on my acer about ways to fix the problem i came to the decision to restore the laptop to the time of my first installation which was adobe flash player (which i installed the day before.) i was unable to do a full factory reset as the only options available are to either restore to a backup, or re-install windows (which requires a disc, which i dont have). i also didnt configure a backup as i had only had the laptop a day!
View 9 Replies
View Related
