Cannot Connect To Network - No Cable Plugged In / Limited Access

Jul 19, 2012

My laptop suddenly stopped being able to connect to the network in my house and for that obviously it doesn't have any internet. It doesn't work either by connecting a cable or trying to use the wireless, here are the detaills for each case: When I connect the cable, the laptop detects it, but doesn't detect any network, it doesn't seem to even be trying. I checked on the network adapters, and it clearly says "enabled" when connected and when disconnected it changes to "No network cable plugged in". When I try to connect to my network, it always ends up saying "Limited access", when I tried troubleshooting, it said that there may be an error with the network drivers, I tried the fix there, and then it says that there must be an error with the network adapters.

Here's what I have tried so far:
-Reinstalling the devices and drivers, when I check them in device manager, it says that both the wireless and network driver are working properly.
-I tried resetting the router.
-Tried resetting the bios of the computer to it's factory ones.
- Tried resetting IPv4 and IPV6, along with the IP/TCP using the command prompt, still no go.

When I try to ipconfig /release or ipconfig /renew, I get an error saying the next thing: "An error ocurred while releasing interface Loopback Pseudo-Interface 1: they System cannot find the file specified. The operation failed as no adapter is in the state permissible for this operation."

Here is my info when using ipconfig /all:
Host name... : Jorge -NB
Primary Dns Suffix : Empty
Node Type : Hybrid
IP Routing Enabled: No
Wins Proxy Enabled: No

Tunnel adapter teredo tunneling pseudo-interface:
Media state: Media disconnected
Connection-specific DNS suffix: empty
Description: Teredo Tunneling Pseudo-interface
Physical Adress: 00-00-00-00-00-00-00-E0
DHCP Enabled: No
Autoconfiguration enabled: Yes

View 2 Replies


ADVERTISEMENT

Unable To Connect To Wifi - No Network Access/limited Access

Nov 10, 2011

Last night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.

View 2 Replies View Related

Can't Connect Directly To Wifi But Can Using IPhone As Hotspot - Limited Access, Changing It To Public Network Etc

Feb 8, 2012

I have been using my home internet in my new place for a couple of weeks fine, yesterday morning when I tried it it had the limited access yellow triangle and wouldn�t connect.I reset the router and connected to the wifi on my iphone which worked fine, I checked the DNS numbers were the same as on my iphone which they were and I had not changed any settings. I spent the entire day yesterday online looking for solutions, I�ve reset the adapter, disabled it etc, set the ip and dns to automatic and back again etc etc.
When my wifi tries to connect to my home internet it takes a LONG time to identify and then identifies it either as an unidentified network and/or public. Even when I change it to home it changes it back to public or just doesn�t let me change it to home and says try again later.

Ps- I just tried disabling then re-enabling the protocol 6 on the wifi which isn�t working and it just said �in order to configure TCP/IP, you must install and enable a network adapter card. But then it just let me configure it and is still connected but with limited access and public network.

View 9 Replies View Related

Can't Connect To Home Wireless / Limited Access

May 12, 2012

A few hours ago I installed a Windows update, so my ACER Aspire 5733 restarted. I shut it down after the restart, not paying attention to the wireless. When I went to turn it back on, I couldn't get online because my home wireless connection has "Limited access."The icon signifying signal strength on the taskbar has a small yellow star-shaped dot on it. When I click on it, it pops up and says "Not connected. Connections are available. It then says my wireless network name and says "Limited access" next to it. The signal strength is excellent.When I disconnect and then reconnect it says the connection was unsuccessful because the computer has limited connectivity.The same network is working on my other laptop and on my iPod, but not on my Aspire 5733.

View 9 Replies View Related

Limited Access Wireless? Cannot Connect To Internet On Only One Machine?

Jun 17, 2011

So yesterday my internet was working fine, but today when I returned and got it out of standby, I could not connect to the internet. It says "limited access" when I try to connect to the wireless, and when I try to connect with an ethernet cable nothing happens.If I troubleshoot, Windows is unable to resolve it. The problem it says is:There might be a problem with the driver for the Wireless Network Connection adapter.There might be a problem with the driver for the Local Area Connection Adapter.

View 9 Replies View Related

Unidentified Network, No Network Access, Limited Access

Dec 29, 2009

I have a brand new acer aspire notebook and I'm trying to connect to my airport extreme card built into my iMac desktop. The laptop sees the signal just fine, but it will not connect to the Internet and I get "limited access". What can I do to connect?

View 1 Replies View Related

BSOD - Limited Access On Wireless Network

Mar 29, 2012

A few days ago I booted up my HP Pavilion dv4-2049wm laptop. Windows update needed to reboot, due to my postponing it for a few days, so I let it reboot and I started getting blue screens. After a few restarts (getting the BSOD every time), I booted into the last known good configuration. It booted up fine, but now I can no longer connect to my network (wired and wireless). It sees my wireless connection, but states "Limited Access."

Things I have tried:
- Uninstalled/Updated network drivers from HP's site, specific to my laptop model.
- Uninstalled all windows updates that were installed before BSOD
- Flushed, registered, renewed dns via command prompt
- Reset Winsock via command prompt
- Tried a "clean" boot
- Ran Windows Check Disk
- Ran Windows Memory Tester (Unsure of exact name)

On the day of the crash I attempted to do a restore, but the earliest restore I could do was at the time of the windows update (same time as BSOD). One thing I did notice is that the "Teredo Tunneling Pseudo_Interface" listed under network adapters is no longer there. Not sure what that might have to do with anything. I ran this tool (Who Crashed/Crashdump) and here is my log:

Code:
System Information (local)
computer name: DECARO
windows version: Windows 7 , 6.1, build: 7600
windows dir: C:Windows
CPU: AuthenticAMD AMD Turion™ II Ultra Dual-Core Mobile M620 AMD586, level: 16
2 logical processors, active mask: 3
RAM: 4022542336 total
VM: 2147352576, free: 1925451776
Crash Dump Analysis .........
[Code] ....

On your computer a total of 26 crash dumps have been found. Only 21 could be analyzed. Only 15 are included in this report. 2 third party drivers have been identified to be causing system crashes on your computer. It is strongly suggested that you check for updates for these drivers on their company websites. Click on the links below to search with Google for updates for these drivers:

atikmpag.sys (AMD multi-vendor Miniport Driver, Advanced Micro Devices, Inc.)
athrx.sys (Atheros Extensible Wireless LAN device driver, Atheros Communications, Inc.)

If no updates for these drivers are available, try searching with Google on the names of these drivers in combination the errors that have been reported for these drivers and include the brand and model name of your computer as well in the query.

View 9 Replies View Related

Network Wireless Adapter - Limited Access

Jan 27, 2012

My new Samsung laptop has just stopped allowing me access to the internet. Its not a problem with the router as I have a wired connection to a desktop that is fine. My laptop has been working ok but now I just get 'Limited Access' from the status bar. All the other checks have been made with ISP the Intel(R) Centrino(R) wireless N130 is supposed to be working according to the network properties dialogue box. Also have wired the ethernet from desktop to laptop and still the same response so narrowing it down to the possible driver software.

View 1 Replies View Related

'Limited Access'- Wireless Network Connection?

Jul 25, 2010

I cannot access my internet and don't know why. When i try to access the internet it says I have 'limited access' although I have a full internet connection. Does anyone know how to fix this please? I have a Windows 7 operating system

View 9 Replies View Related

Wireless Network - Limited Access Message Comes Up For No Reason

Jun 17, 2011

I have an issue with my wireless. It comes up now (for no apparent reason) that the network has Limited Access.

View 1 Replies View Related

Limited Access To Wireless Network, Automatic Update Error?

Sep 13, 2011

I have this problem with my new Asus laptop which was fine yesterday, but cannot connect to any wireless network now. When I click the Network connections button on my task bar it shows me my internet connection with the words Limited Access next to it. I've been on google for a good 2 hours and can't really find the answer. I may know what's wrong, however. Yesterday I pressed the shutdown button on my laptop and then it starts those automatic updates that happen when you shut down. It said something like "Updating 1 of 1 updates". It took a while so I put thelaptops screen down, and when I checked on it again 5 minutes later... Blue screen. I held the power button down on my laptop and shrugged it off.. but now I can't connect to any wireless network.Assuming the network driver is the thing that was updating last night, I searched up what to do, Rollback the dri

View 1 Replies View Related

Can't Connect To Home Wireless Signal ("Limited Access") - Windows 7?

Dec 23, 2009

I am setting up a new Acer laptop and cannot access the internet via my home wifi network. I have 2 other laptops connected to the network and running fine. The new pc is running 64 bit Windows 7 (the others run XP) and has an Atheros AR5B93 Wireless Network Adapter. When I pan over the wireless icon in my taskbar, it says "Limited access" beside my home wifi signal.

View 9 Replies View Related

Internet Disconnects, Won't Connect And Shows "Limited Access"

Feb 9, 2012

My internet is connected to a laptop downstairs as well as mine (sometimes but rarely). I often cant connect. It comes up with a box that says "Connect to a Network" and for options, "Troubleshoot problems" or "Tell me more about Internet connection problems". I click "Troubleshoot problems" about 5,000 times a day (no joke) and about 20 of those times it fixes the problem. The other times it does nothing and I have to go shut off the downstairs computer and unplug and plug back in the router about 10 times. Then sometimes is works for 10 minutes or so, and sometimes it doesn't. If I ever do get it working, it never ever stays working. Most times when the internet does connect, it works for about 30 seconds then shows a yellow triangle warning said with an exclamation mark stating "limited access". My SGS2 phone connects just fine. So does the laptop downstairs and any other gadgets except for my desktop! This is frustrating as anything!

View 7 Replies View Related

Unable To Connect Use Internet. 'Limited Internet Access'

Nov 17, 2011

i recieved my new lenovo z570 ideapad yesterday...i'll just put some of the spec down incase you want to know.

proccessor: intel i5 (second gen)
graphics: nvidia geforce
os: windows 7 64bit
yadayadayada...

anyway, after charging it up and turning it on, i started to install programmes and other bits and bobs. e.g ituens, flash player. just the usual essentials. i used the laptop to watch videos on Internet, genenral browing such as facebook, so in short, the internet was working fine. just before i went to bed that night i installed avg security (free version) and ran a full scan. when the scan finished, i put the laptop into hibernate, and went to sleep! happy in the knowledge my new gizmo was running smoothly!

just before i woke up i heard the laptop turn off as it had run out of charge. so i plugged it in and charged it up, then turned it on. this is where the problem starts...i connected via wifi however the logo at the bottom right of the screen showed the signal strength meter on empty, with a yellow star covering it. i clicked the icon, and it said, 'not connected, connections are available' and below shows im connected with 5/5 signal strength, but on 'limited access'.

1) there might be a problem with the driver for the local area connection adapter

2)there might be a problem with the driver for the wireless network connection adapter

there are 28 updates, but im unable to update them as i have no internet connection. i also cant connect via the ethernet cable.i cant roll back the drivers as there are no previously installed ones, and i cant update them as i am already up to date.my other laptop (acer aspire 5630 running on vista) works perfectly fine using wifi and the ethernet cable, so i honestly dont know whats wrong. after reading things on my acer about ways to fix the problem i came to the decision to restore the laptop to the time of my first installation which was adobe flash player (which i installed the day before.) i was unable to do a full factory reset as the only options available are to either restore to a backup, or re-install windows (which requires a disc, which i dont have). i also didnt configure a backup as i had only had the laptop a day!

View 9 Replies View Related

No Picture On Lcd When VGA Cable Plugged

Dec 26, 2011

I have a Staples VGA Monitor Cable plugged into my 52 inch tv and my HP laptop, but I cannot get the picture to show on the TV. The cable does work with my son's HP laptop, however.

View 3 Replies View Related

Wireless-G USB Network Adapter "limited Access"?

Nov 30, 2012

I have a Linksys Wireles-G USB Network Adapter (Model #: WUSB54GC) that wont fully connect to my home Wi-Fi network. "Limited Access" is as far as I can get. The Windows Troubleshooter just says there might be a problem with the driver, even though I downloaded the latest version driver and installed correctly.

View 9 Replies View Related

Ethernet Cable Is Not Properly Plugged In

Apr 16, 2011

I own a toshiba satellite C655-S5061 with win7x64 sp1 ultimate installed on it. My internet (wired) connection used to work fine until yesterday. Troubleshooter says "an ethernet cable is not properly plugged in or might be broken", Tried a repair install, updated drivers, reinstalled drivers but of no avail. The ethernet cable when connected to other laptop works fine.

View 2 Replies View Related

PC And Laptop Freezing Up When Ethernet Cable Is Plugged In To Them?

Nov 16, 2012

Recently, I upgraded the houses' internet to fiber (or so its called in Chinese, living abroad in Shanghai BTW)and the within the first day of upgrading, I've seen a tremendous increase in internet speeds. However, within a day, a new problem also came up.Whenever I plug the ethernet cable into its port at the back of my PC, all the open programs suddenly stop responding, and then my PC freezes. I've tried booting up without the ethernet cable plugged in, and everything works perfectly. Yet the second I plug in the ethernet, everything stops working. The conditions are as follows: -I am unable to CTRL - ALT - DELETE to bring up task manager.- The mouse cursor is still moveable, but nothing can be clicked or selected-The cursor turns into the spinning loading circle, but never finishes whatever it's trying to do.I am forced to manually power down (hold the power button or unplug) the PC.However, rebooting in Safe Mode with Networking yields no problems. The internet connects just fine, and there is no freezing/lagging going on at all. I'm currently posting this from Safe mode w/ Networking. The conditions are pretty much the same when I plug in the ethernet cable to my Macbook. Chrome, or whatever I'm using simply stops responding, and I get the spinning rainbow pinwheel of doom. Forced to manually power off. This has also occurred to a friends' Macbook when he plugged in the Ethernet in an adjacent room.

View 3 Replies View Related

Ethernet Cable Err Message Thinks Not Plugged

Aug 26, 2012

Ethernet cable err message thinks not plugged, tried everything...even went to store and got external ethernet adapter, nothing. Checked BIOS settings, etc. Tried restore to 30 days ago, tried reinstalling ethernet drivers. Tried different cables, different slots, you name it--I've tried. Finally did a restore to factory default and still Local Area Connection still doesn't connect, thinks not plugged. Did some reading, discovered the CMOS battery dead, replaced it with a new one. Was able to connect to internet, do download, reboot, get on iternet maybe an hour and then, AGAIN, back to the error message cannot connect, cable not plugged..

View 1 Replies View Related

Black Screen With Mouse (only If Lan Cable Plugged In)

Aug 29, 2012

System: Win7x64 pro, 32gb RAM, Asus Z77, i7 2600k. Normally boots in less than 60 secs Now, today it will boot to a Black Screen with a movable white mouse arrow (not a blinking cursor).

BUT ONLY if the NIC is enabled and the LAN cable is connected. If I unplug the lan cable or disable the NIC in the BIOS it boots fine. Additionally, if I leave the NIC enabled but unplug the lan cable until AFTER it boots to the desktop, I'm fine. (Thus, I can't assume it's a driver issue. Something is happening upon boot via the network.)

I've looked in the Event Viewer and can find where I have to power off the system via a hard reset and I can see errors when it boots and it sees the NIC unplugged but I can't find anything else.

Something else, it only happens on my User Account. I created another account (aptly called Black Screen) and it booted fine with the NIC enabled and plugged in.

I'm running NIS2012, updated and have done a full scan twice now.

Finally, thinking it was a startup service/program under my original user account I used msconfig to disable all non MS services and disable every startup. It still booted to a Black Screen w/cursor if the NIC was enabled and plugged in. Furthermore, Safemode w/o networking is fine but safemode w/networking has the same problem. BUT ONLY IF THE NIC IS PLUGGED IN AT BOOT - NOT AFTER THE BOOT.

Edit: updated Malwarebytes - scanned and found nothing. Used MS Security Essentials - scanned and found nothing.

View 3 Replies View Related

Juniper Network Connect 6 For VPN Access

Jan 30, 2009

Has anyone got Juniper Networks Network Connect working? I was able to install Juniper Network Connect, but the Juniper "host checker" refuses connection, because OS is wrong: check_os returns false. Any idea how to work around?

I checked the FAQ from Juniper, but they are saying "we will support when Windows 7 is GA".

View 5 Replies View Related

Desperate - Cannot Connect Or Access Wireless Network With Windows 7

Oct 16, 2011

In desperation, all boffins, geeks and wizards at Microsoft � I need help. I have had a home network now for at least 10 years and for the first time, I just cannot get it to work. That is since I upgraded to supa dupa Win 7 Prof. I have three machines in the network, two laptops and one desktop. Printers, backup drives etc all attached to the desktop. Desktop and one laptop running Win 7 Prof. One laptop running Xp.

In a nutshell, I have tried everything on this website and others and nothing works. I am no idiot around this stuff and I am simply dumb founded. I have set up and recreated Homegroup, changed settings, disabled my Eset firewall as well as win firewall. You name it I have tried it � to no avail. After doing some research it appears many, many people have a similar problems. Machine can see each other, but come hell or high water, cannot access. I am soooo disappointed with this. Please tell me there is something different that I can try. At this point, all my hardware is locked out since upgrading to Win 7.

View 3 Replies View Related

Limited Access Signal Beside Internet Access?

Dec 9, 2011

Recently, a "Limited Access" signal has been coming up beside my internet access signal, even though it's got full access and the wireless connection is fine .

View 4 Replies View Related

Cant Access Internet With New Laptop, Only Limited Access?

Oct 2, 2012

laptop so I reformatted his laptop and when I try to to connect to the internet via WiFi I could connect but I would have limited access. I can connect to the internet with my old laptop, iphone and xbox. But I cant connect to my newly reformatted laptop

View 9 Replies View Related

Connect TV To PC With A Direct Connect Cat5 Cable

Jan 18, 2012

I have a large screen TV that I need to run PowerPoint presentations on, and maybe video. The IT department set up Cat5 from the PC to the TV, but I cannot get anything from the PC to display.

I am trying this on two different computers. One is XP Pro, and the other is Windows 7 Pro. I would prefer the XP machine, but will sacrifice the Windows 7 machine to this if I have to.

Both the PC and the TV show connectivity at the ports, but there is no display on the TV. Multiple Monitors do NOT show in either machine.

View 2 Replies View Related

"No Network Access" And "Limited Connection/Connectivity" ?

Jul 18, 2012

When I started using my computer this morning everything was fine, and then "no network access" kept appearing, along with "limited connection/connectivity". I would troubleshoot the problem, but then at the end of the troubleshoot it would freeze, and my screen went black, so I had to turn my computer off and then on again. This problem has persisted throughout the day, I've googled it but nothing really the same as this has turned up .

View 1 Replies View Related

Access A Cable Modem Via Wireless Access Point?

Feb 19, 2012

This question may not be what you think it is. I am trying to fix an intermittent issue in my home environment. The issue is I am having to use wireless. Our Xfinity Cable/WAP modem sits on the top floor of our house. I am located in the basement. The wireless signal I get most of the time is very good, and by very good i mean at least 15+ mb/s on [URL]

I am taking the Cisco Network Academy classes and am familiar with network terminology and concepts. However, what I'm trying to do is take a router/WAP (using it downstairs where I'm located) and configure it to access our xfinity modem upstairs, so that I can plug in to it downstairs using a RJ-45.

Let me know what yall think. By the way the router/wap i would be using is a netgear model unknown at this moment but could easily find out.

View 4 Replies View Related

Modem And Router Will Not Connect To Computer Only Shows Unidentified Network/public No Internet Access, Wired Connection

Nov 11, 2010

For some reason my router and modem will not show correctly on my dell inspirion one desktop. Im running windows 7 and here are the net work connection deatils

Connection -specific DNS Belkin
Description Realtek PCIe GBE Family Controller
Physical Address 00-00-00-00-00-00
DCHP Enabled Yes
Ipv4 Address 192.168.2.2
Ipv4 Subnet Mask 255.255.255.0
Lease obtained Wednesday, November 10, 2010 9:45 PM
Lease Expires Sunday, December 18, 2146 4:17 AM
IPv4 Default Gateway 192.168.2.1
Ipv4 DHCP Server 192.168.2.1
Ipv4 DNS Server 192.168.2.1
IPv4 WINS Server
NetBIOS over Tcpip enabled Yes

The Connection was working about ten days ago and then suddenly stopped and read as an unidentified network no internet access. at one point is was not receiving packets but now it is but it still says no internet access on the IPv4 Connectivity. Media state is also enabled and the speed is 100.0 Mbps when i troubleshoot it says windows cant identify problem but in the details it says default gateway is available. when i use the cmd prompt ipconfig/all my local ethernet adapter has a physical address of all zeros.

View 9 Replies View Related

Limited Access To Internet?

Sep 12, 2011

My daughter has a laptop connected to our wireless broadband from Virgin and was working fine for last 6 months then overnight it changed to limited access and will not let her on internet. When we try to diagnose problem it says problem with network adapter driver. We cannot update driver as no acces to internet. Shee needs this working for going back to university next week so can anyone help us.

View 3 Replies View Related

Wifi Has Limited Access?

Sep 30, 2012

im having trouble with my wifi. The day before it works fine but then the next day i turned on my Vaio laptop and it says Limited Access to my home wifi. I tried connecting to other wifi but same thing. I tried resetting the router, disabling and enabling the wireless connection but all didnt work. I tried connecting it with the cable directly still cannot connect. Finally i did a system restore to the day before where its working fine, it worked. The next day it says Limited Access again! So im guessing 'something' made my wifi error after that 1 day and i dont know what to do

View 3 Replies View Related

Connected But Says Limited Access?

Oct 11, 2011

I recently just got a laptop for college.Today I tried to connect to the internet and it's connected but its says Limited access. I have been looking online to fix this problem and they say to go online. But when I open a browser I can't connect. I was wondering how I fix this? I have a cable that connects to my router. But it's still saying limited access to any internet connection that I can use (ex. wireless, cable).

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved