Network Error Message: "Error Code: 0x80070035"
Sep 1, 2011
I have had my vista pc and my windows 7 (basic) net book setup to let me share files (through an Netgear DG834PN Route) for around 18 months with no problems.
However as of 3 days ago I can no longer do this and non of the network tools can fined or solve the problem. I can uses the internet though my rooter, see my vista pc on the network as well as the media streaming (windows one) thing.
I can also access my net book hard drive from my pc no problem and transfer/delete files as well?
When I do try to connect the following error message is given: "Error code: 0x80070035 The network path was not found"
P.s. I know windows 7 basic has not create home group ability, but it worked with the one I made on vista. I can not afford to upgrade my copy of windows 7 so that is totally out of the question.
View 1 Replies
ADVERTISEMENT
Dec 13, 2009
I installed Windows 7 on my computer a little more than a week ago from Windows Vista Home Premium. My home network worked fine, and I was able to connect to the internet, share files and everything perfectly. However, starting yesterday other computers on the network could not see me and I could only see one or two other computers on the network, and I couldn't see the main computer, i.e. the one with the wireless router.
When I try to click on that computer in Windows Explorer, the green loading bar starts to fill up, but then a window pops up that says "Windows cannot access "(Name of the computer). Check the spelling of the name. Otherwise there might be a problem with your network.
To try to identify and resolve network problems, click Diagnose. Error code: 0x80070035. The network path was not found." I click Diagnose and no errors were found. I tried removing the network from my network list and resetting it up, and nothing. What should I do?
View 1 Replies
View Related
Nov 26, 2009
I keep getting Error code: 0x80070035 The network path was not found error whenever I try to connect to any other computer (running windows 7 ultimate) on my network. I have another computer with windows 7 ultimate that does not have this problem. Firewalls are disabled on all computers.
Computers all ping fine. Can ping by name too. If I try to connect via IP address, I get Error Code: Error0x80004005 Unspecified error
View 4 Replies
View Related
Jan 20, 2009
Ok, I have a laptop and a desktop. Desktop is currently running 7 x64 and laptop is running 7 x86.
Few weeks ago I was able to access my LAPTOP from my DESKTOP normally by using the Network in the explorer. I was prompted to key in my Username and Password of my LAPTOP and I gained access after.
Now, I have no idea what happened to my DESKTOP. I am able to access other computers but not my LAPTOP. It keeps stating Network path not found with error code 0x80070035. Troubleshooting indicates no problems found.
I do dual-boot with Vista x64 on my DESKTOP and I am able to gain access to my LAPTOP using Vista.
One of the workaround I got for Windows 7 is to create HomeGroup and use my LAPTOP to join it and I can gain access to Network after that.
So, is this a HomeGroup bug and any fix for it?
EDIT: Never mind, I just re-create my password on my laptop and it's fine now. So, it's really weird.
View 1 Replies
View Related
Nov 27, 2009
I keep getting Error code: 0x80070035 The network path was not found error whenever I try to connect to any other computer (running windows 7 ultimate) on my network. I have another computer with windows 7 ultimate that does not have this problem. Firewalls are disabled on all computers. Computers all ping fine. Can ping by name too. If I try to connect via IP address, I get Error Code: Error0x80004005 Unspecified error.
View 9 Replies
View Related
Mar 11, 2011
My father and brother each has a separate Windows 7 desktop, and neither one has any problems with connectivity. There is also a Windows XP machine on the same network, and it has no problems with connectivity. The XP is attached to a shared printer that can be successfully accessed from any desktop machine on the network.Now comes the interesting bit: I have a laptop PC which I upgraded to Windows 7 from Windows Vista x64 Home Premium. I am able to see the two Windows 7 computers in the Network list, but when I double-click on them, I get the message:Windows cannot access \MACHINE-NAME Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.Error code: 0x80070035 The network path was not found.All the machines on my network have a static IP address. When I try to access any of the other Windows 7 computers on my network, I get the same message as above but with the following two lines replacing the last two lines above:
Error code: 0x80004005
Unspecified error
The troubleshooter found this problem:Windows can't communicate with the device or resource (IP address) - Detected I am unable to see the XP machine on the network list, and until recently, I have been able to view its files via IP address only. I have tried every solution I found so far, including:Disabling IPv6 Opening the desired ports in Windows Firewall Enabling Network Discovery and File and Printer Sharing Releasing and renewing the IP configuration Flushing the DNS cache Clean boot for diagnostic test Enabling all P2P services?
View 5 Replies
View Related
Nov 26, 2012
In a network with 10 computers, the PC-2 can access everyone but the PC-5. All other computers can access each other and PC-5 can also access everyone else.
Where is the bug? The PC-2 has the bug right? Why is it only one PC that the PC-2 cannot access?
Basic routines are checked I think: All running windows 7 All having same network sharing settings, Network discovery ON (both home and public) File sharing ON (both home and public) Public folder sharing ON (both home and public) Password OFF (both home and public)
Error message say: "Check the spelling of the name." (?!?!)
View 2 Replies
View Related
Dec 10, 2009
my new laptop is less than a week old.
hp dv6-2044ca.
and I've been trying to configure a home network with the workgroup, WORKGROUP
i need to share files between a XP Desktop and a Laptop that has Windows 7.
i have followed a lot of guides and tips by now but i cannot get it to work!
on my laptop, it recognizes the XP computer, but fails to open it
it says i have the naming wrong, yet i know it is correct.
diagnose doesn't help and Pinging the ip address says request timed out 4 times, thne something about 100% packet loss.
on the xp computer side, it recognizes my laptop and can access files
as for network settings, it should be all correct cause i followed this guide that i found on a post by a Microsoft worker (i think).
i just cannot figure out what is wrong.
and the error is 0x80070035
my purpose for this is to access Desktop and the printer connected to it
as well as the shared documents folder,..
View 9 Replies
View Related
Apr 6, 2012
I have changed my graphic card (MSI N560GTX-TI) and new PSU (Corsair GS 700) and now my PC does NOT start, it gives me an error message: "error code biohd-2 warning no drives detected".Checked the cables, SATA ports, hardware diagnose, reset CMOS, removed the motherboard battery and nothing...My HD is a WD Caviar Green 2TB.
View 4 Replies
View Related
Jun 16, 2009
I am trying to install Windows 7 on my computer but I get is this error message:
CDBOOT: Cannot boot from CD - Code: 5
The hard drive is totally clean, formatted and ready. I been able to install the program in other machines without problem. Even, it boots in an old Pentium III, 380Mb old computer that I have for testings.
I tried the installatio connecting the hard drive on other computer capable to run Windows 7 very well, but when I put the hard drive back it does not work neither.
Can somebody have a solution for this?
View 1 Replies
View Related
Apr 24, 2011
array and image errors appear all the time and unable to watch any video on line.
View 1 Replies
View Related
Oct 25, 2009
Installed Windows 7 last night. Everything seems fine except two of the screen savers – Goldfish Aquarium 2 and Marine Aquarium 2 + Time both cause the following error message to pop up when selected (and neither work):
Error while unpacking program, code LP5. Please report to author.
I have found a number of different things on the code LP5 error, but nothing specific to these two programs.
Any ideas? Anyone know how to fix this? Anyone have the same issue?
View 0 Replies
View Related
May 9, 2012
I have a readyNAS Duo where I keep all my music files, a few days ago the Raidar program stopped allowing me to browse the drives saying to check spelling and error code 0x80070035 was displayed, I can access the NAS via it's web page but this does not allow me to access the file structure.This is via my router.If I connect the ethernet cable from the NAS straight into the PC all is fine?
View 2 Replies
View Related
May 2, 2011
So over the past few days, I've painstakingly setup a new Sandy Bridge PC just the way I like it and was preparing to transplant it into my existing system when I discovered I can't access any network shares! It worked fine when it was a completely clean install with just the driver loaded.
System A: DIY Sandy Bridge PC with Windows 7 x64 SP1.
System B: DIY Athlon 64 X2 PC with Windows 7 x86.
System C: Gateway Notebook with Windows 7 x86.
All systems are using MSE for AV, have the firewall and password protected sharing OFF. Network discovery, file and printer sharing, and public folder sharing are on. A gives me error code 0x80070035 (network path not found) when I try to acceses any shares on the network, even its own. A only sees B on the network, not C. B and C can access all shares, inlcuding A's shares. All the systems can ping each other. I thought perhaps when I was setting up A that I disabled a service or feature that caused this, but I've set everything back to way it was and it still doesn't work. I've also tried a second NIC.
View 8 Replies
View Related
Dec 20, 2010
Win7 64 bit reports a problem with the driver for Microsoft ISATAP Adapter and Toredo Tunneling Adapter. Troubleshooting does not automatically fix it and reports that the drivers are OK. I have seen several other reports of this problem but not yet found a cause or fix
View 6 Replies
View Related
Aug 7, 2009
3 PC's all running Windows 7 Ultimate
1 Desktop connection via wire to router
2 Laptops connected via Wireless (Linksys wrg54g)
All 3 PC's are visible on all 3 PC's via the Homegroup in Windows Explorer. I can browse/copy/write files on all 3. All sweet. All 3 can print to the 2 Printers connected to the Desktop.
Laptop A is configured to Backup using the Windows 7 Backup to the Desktop. This works fine.
Laptop B however when trying to backup to the desktop I get an error message after I have selected the Drive in the setup screen and I've entered my username/password credentials
The error code is 0x80070043
I've tried everything and I'm quite experienced.
Both laptops for all intents and purposes are identical.
View 9 Replies
View Related
Nov 29, 2009
I have a Desktop computer with Windows 7 (32 bit) and a laptop with Windows 7 (64 bit). I'm trying to set up a network printer, so I can print from my laptop using my desktop computeer printer. I've set up my wireless computer which uses Windows Xp just fine, and can print from that computer. But when I try to add a network printer on my laptop, as it's finishing installation, an error message pops up saying "cannot connect to printer" error code 0x0000000d. Any feedback would be greatly appreciated. Is it possible to set up a 64 bit with a 32 bit computer?
View 3 Replies
View Related
Dec 6, 2009
When I try to create a system image on a network location Windows asks for Network credentials for the target location. The credentials I enter are correct but I always get an error message that the location can't be used because the password is not correct (Error code 0x80070056).
Is this a bug in Windows 7? Any way to fix or work around this?
View 3 Replies
View Related
Jun 26, 2010
Once I've started my computer the "Network" icon is kind of "searching" but after a while it becomes red like I have no internet access. But I do got internet, I can go the internet but I can't open anything in the start menu. Then after a while again, the icon becomes "normal" and everything works fine. The code I get when I troubleshoot is "0x80070426" and the troubleshooter wont start. This is kind of annoying, I am using Windows 7 ultimate.
View 2 Replies
View Related
Mar 12, 2011
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
View 1 Replies
View Related
Jun 28, 2011
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory
View 6 Replies
View Related
Apr 5, 2011
I have Windows 7, Live Mail. Mail with attachments come in with no problems, like photo attachments, but my mail will not go out with photos attached. They are not huge files. I get an error message "error/tasks" but then that screen freezes.
View 11 Replies
View Related
Aug 9, 2012
I unistalled malwarebytes from my pc and now I am getting the following "run-time-error 53, file not found mbam" How do I get rid of that plz?
View 7 Replies
View Related
Jun 27, 2011
Before my computer was working fine when i am connecting to the internet using a portable usb internet huawei. Then one morning when i tried to connect i got this "Error: 720".
View 1 Replies
View Related
Sep 9, 2011
I am using Windows 7 32-bit Premium. I'm trying to run a Batch file with several dll's, and I'm getting this error:Banner: Error Occurred - Add LicenseBody: Unable to enumerate resources. Error Code: 15106I have tried to google this, but I haven'tAlso, if I even try to register any of the Batch's DLLs manually, I get this error:Banner: RegSvr32body: The Module "C:Bla Bla Bla...." was loaded but the call to "INSERT DLL HERE" failed with error code 0x80028011c.For more information about this problem, search online using the error code as a search term.
View 1 Replies
View Related
Jul 31, 2012
i downloaded a disk image iso file for one of my programs. i mounted and ran the image. the setup.exe file runs fine but when i make any selction i get a "error calling shell execute. error code: 5" message and the program terminates.i tried it on a xp machine and also burned a cd but am still getting the error message
View 1 Replies
View Related
Jul 23, 2012
I am having great difficulty downloading and installing AVG 2012. Keeps on saying goodbye before installing and i am getting message that says MSI engine failed to install. Can't download. have tried 2 system restore points but still same.
View 1 Replies
View Related
Jan 19, 2010
In the last few months I have been getting error messages in my Yahoo mail account. It will not go to next email and returns an 'Error Code 5' or recently an 'Error Code 15'. It says "Sorry for the inconvenience. You have stumbled upon an unexpected, temporary problem." This happens every other email. What are these codes and why is this happening?
View 1 Replies
View Related
Apr 28, 2011
I cannot get onto Yahoo Mail. I have windows 7. Any ideas?? I have rebooted and shut down, and had no luck.
View 3 Replies
View Related
Dec 8, 2012
Hey everyone, I am having an issue with my computer right now. When I boot it up, I get an error message reading " Applaunch.exe - Application Error" and then under it, it reads: "The application was unable to start correctly (0xc0000005). Click OK to close the application. Okay, so I click OK. After I click it, and around 5-30 seconds it pops back up again.
View 1 Replies
View Related
Aug 11, 2010
I recently switched out an older Netgear router for the Netgear WNDR3300. I have a 1TB WD MyBookWorld connected via ethernet to the router. Ever since the router switch I have been having two specifice issues:While uploading videos to Facebook, the video will upload anywhere from several MB up to over 100 MB, then stall, saying it's still uploading but trust me, it isn't. I can copy files/folders from the networked hard drive to my computer flawlessly, but when I try to copy files/folders from my computer to the networked hard drive, it copies anywhere from a few seconds to maybe a couple minutes then stalls out, giving the error message: "Network Error. There was a problem accessing [\SERVERFOLDER]... Make sure you are connected to the network and try again." with Retry, Skip and Cancel. When cancel is pressed it gives: "An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred.
Other useful information: on the new router, the WNDR3300, if I use WEP security, I can copy files/folders to the hard drive, no problem. However if I try to use WPA/WPA2, the abovementioned problems occur. I would use WEP and just forget the hassle, but WPA2 is much faster and more secure, so I really want to get this fixed.I also believe the two problems are somehow related, considering they both involve working for a few seconds to a few minutes, then stalling and failing. Could this be somekind of authentication or something to do with WPA/WPA2 that I'm doing wrong?
View 1 Replies
View Related
