Network Error 0x80070035 - In Only One PC
Nov 26, 2012
In a network with 10 computers, the PC-2 can access everyone but the PC-5. All other computers can access each other and PC-5 can also access everyone else.
Where is the bug? The PC-2 has the bug right? Why is it only one PC that the PC-2 cannot access?
Basic routines are checked I think: All running windows 7 All having same network sharing settings, Network discovery ON (both home and public) File sharing ON (both home and public) Public folder sharing ON (both home and public) Password OFF (both home and public)
Error message say: "Check the spelling of the name." (?!?!)
View 2 Replies
ADVERTISEMENT
Dec 10, 2009
my new laptop is less than a week old.
hp dv6-2044ca.
and I've been trying to configure a home network with the workgroup, WORKGROUP
i need to share files between a XP Desktop and a Laptop that has Windows 7.
i have followed a lot of guides and tips by now but i cannot get it to work!
on my laptop, it recognizes the XP computer, but fails to open it
it says i have the naming wrong, yet i know it is correct.
diagnose doesn't help and Pinging the ip address says request timed out 4 times, thne something about 100% packet loss.
on the xp computer side, it recognizes my laptop and can access files
as for network settings, it should be all correct cause i followed this guide that i found on a post by a Microsoft worker (i think).
i just cannot figure out what is wrong.
and the error is 0x80070035
my purpose for this is to access Desktop and the printer connected to it
as well as the shared documents folder,..
View 9 Replies
View Related
Dec 13, 2009
I installed Windows 7 on my computer a little more than a week ago from Windows Vista Home Premium. My home network worked fine, and I was able to connect to the internet, share files and everything perfectly. However, starting yesterday other computers on the network could not see me and I could only see one or two other computers on the network, and I couldn't see the main computer, i.e. the one with the wireless router.
When I try to click on that computer in Windows Explorer, the green loading bar starts to fill up, but then a window pops up that says "Windows cannot access "(Name of the computer). Check the spelling of the name. Otherwise there might be a problem with your network.
To try to identify and resolve network problems, click Diagnose. Error code: 0x80070035. The network path was not found." I click Diagnose and no errors were found. I tried removing the network from my network list and resetting it up, and nothing. What should I do?
View 1 Replies
View Related
Nov 26, 2009
I keep getting Error code: 0x80070035 The network path was not found error whenever I try to connect to any other computer (running windows 7 ultimate) on my network. I have another computer with windows 7 ultimate that does not have this problem. Firewalls are disabled on all computers.
Computers all ping fine. Can ping by name too. If I try to connect via IP address, I get Error Code: Error0x80004005 Unspecified error
View 4 Replies
View Related
Jan 20, 2009
Ok, I have a laptop and a desktop. Desktop is currently running 7 x64 and laptop is running 7 x86.
Few weeks ago I was able to access my LAPTOP from my DESKTOP normally by using the Network in the explorer. I was prompted to key in my Username and Password of my LAPTOP and I gained access after.
Now, I have no idea what happened to my DESKTOP. I am able to access other computers but not my LAPTOP. It keeps stating Network path not found with error code 0x80070035. Troubleshooting indicates no problems found.
I do dual-boot with Vista x64 on my DESKTOP and I am able to gain access to my LAPTOP using Vista.
One of the workaround I got for Windows 7 is to create HomeGroup and use my LAPTOP to join it and I can gain access to Network after that.
So, is this a HomeGroup bug and any fix for it?
EDIT: Never mind, I just re-create my password on my laptop and it's fine now. So, it's really weird.
View 1 Replies
View Related
Nov 27, 2009
I keep getting Error code: 0x80070035 The network path was not found error whenever I try to connect to any other computer (running windows 7 ultimate) on my network. I have another computer with windows 7 ultimate that does not have this problem. Firewalls are disabled on all computers. Computers all ping fine. Can ping by name too. If I try to connect via IP address, I get Error Code: Error0x80004005 Unspecified error.
View 9 Replies
View Related
Sep 1, 2011
I have had my vista pc and my windows 7 (basic) net book setup to let me share files (through an Netgear DG834PN Route) for around 18 months with no problems.
However as of 3 days ago I can no longer do this and non of the network tools can fined or solve the problem. I can uses the internet though my rooter, see my vista pc on the network as well as the media streaming (windows one) thing.
I can also access my net book hard drive from my pc no problem and transfer/delete files as well?
When I do try to connect the following error message is given: "Error code: 0x80070035 The network path was not found"
P.s. I know windows 7 basic has not create home group ability, but it worked with the one I made on vista. I can not afford to upgrade my copy of windows 7 so that is totally out of the question.
View 1 Replies
View Related
Mar 11, 2011
My father and brother each has a separate Windows 7 desktop, and neither one has any problems with connectivity. There is also a Windows XP machine on the same network, and it has no problems with connectivity. The XP is attached to a shared printer that can be successfully accessed from any desktop machine on the network.Now comes the interesting bit: I have a laptop PC which I upgraded to Windows 7 from Windows Vista x64 Home Premium. I am able to see the two Windows 7 computers in the Network list, but when I double-click on them, I get the message:Windows cannot access \MACHINE-NAME Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.Error code: 0x80070035 The network path was not found.All the machines on my network have a static IP address. When I try to access any of the other Windows 7 computers on my network, I get the same message as above but with the following two lines replacing the last two lines above:
Error code: 0x80004005
Unspecified error
The troubleshooter found this problem:Windows can't communicate with the device or resource (IP address) - Detected I am unable to see the XP machine on the network list, and until recently, I have been able to view its files via IP address only. I have tried every solution I found so far, including:Disabling IPv6 Opening the desired ports in Windows Firewall Enabling Network Discovery and File and Printer Sharing Releasing and renewing the IP configuration Flushing the DNS cache Clean boot for diagnostic test Enabling all P2P services?
View 5 Replies
View Related
May 9, 2012
I have a readyNAS Duo where I keep all my music files, a few days ago the Raidar program stopped allowing me to browse the drives saying to check spelling and error code 0x80070035 was displayed, I can access the NAS via it's web page but this does not allow me to access the file structure.This is via my router.If I connect the ethernet cable from the NAS straight into the PC all is fine?
View 2 Replies
View Related
May 2, 2011
So over the past few days, I've painstakingly setup a new Sandy Bridge PC just the way I like it and was preparing to transplant it into my existing system when I discovered I can't access any network shares! It worked fine when it was a completely clean install with just the driver loaded.
System A: DIY Sandy Bridge PC with Windows 7 x64 SP1.
System B: DIY Athlon 64 X2 PC with Windows 7 x86.
System C: Gateway Notebook with Windows 7 x86.
All systems are using MSE for AV, have the firewall and password protected sharing OFF. Network discovery, file and printer sharing, and public folder sharing are on. A gives me error code 0x80070035 (network path not found) when I try to acceses any shares on the network, even its own. A only sees B on the network, not C. B and C can access all shares, inlcuding A's shares. All the systems can ping each other. I thought perhaps when I was setting up A that I disabled a service or feature that caused this, but I've set everything back to way it was and it still doesn't work. I've also tried a second NIC.
View 8 Replies
View Related
Dec 14, 2010
"Error code: 0x80070035 The network path was not found" when trying to access any network shared drives. Our file server is a windows server 2003 standard edition.This problem occured yesterday on my laptop with OS windows 7 pro. I cannot access any shared folders, shared drives. I cannot access my own laptops shared folders. I can see the device on the network and can connect to my laptop and access files on my laptop from other pc's. I have checked all the services required and they are started, netbios over tcp/ip is enabled, network discovery is turned on, windows firewall is turned off and also tried disabling the antivirus on the laptop but none worked. Also tried the system restore, which did not allow me to log back into the domain giving error " Trust relationship between this workstation and primary domain failed". So had to undo the system restore.
View 9 Replies
View Related
Apr 17, 2011
I replaced my power supply and now I get a 0x80070035 error when trying to map my network storage server. I've had this mapped for over a year, and usually just need to enter the password to re-connect after a re-boot. I've tried disabling the firewall, anti-virus, file and printer sharing, etc. I looked for the extra network entries that others have said to delete, but I don't have any.
This computer is running Windows 7 Professional 64 bit. The network storage server is running Windows 7 Professional 32 bit. From the 32 bit machine the 64 bit machine shows up, even in explorer.
From the 64 bit machine the 32 bit does not show up except under the Network and sharing center, selecting "see full map" shows both machines.
I can't see how changing a power supply could cause a problem. I tried going back to a restore point from last week in case a "windows update" caused the problem, which did not show up until the latest re-boot, but that did not help either.
View 4 Replies
View Related
Aug 11, 2010
I recently switched out an older Netgear router for the Netgear WNDR3300. I have a 1TB WD MyBookWorld connected via ethernet to the router. Ever since the router switch I have been having two specifice issues:While uploading videos to Facebook, the video will upload anywhere from several MB up to over 100 MB, then stall, saying it's still uploading but trust me, it isn't. I can copy files/folders from the networked hard drive to my computer flawlessly, but when I try to copy files/folders from my computer to the networked hard drive, it copies anywhere from a few seconds to maybe a couple minutes then stalls out, giving the error message: "Network Error. There was a problem accessing [\SERVERFOLDER]... Make sure you are connected to the network and try again." with Retry, Skip and Cancel. When cancel is pressed it gives: "An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x8007003B: An unexpected network error occurred.
Other useful information: on the new router, the WNDR3300, if I use WEP security, I can copy files/folders to the hard drive, no problem. However if I try to use WPA/WPA2, the abovementioned problems occur. I would use WEP and just forget the hassle, but WPA2 is much faster and more secure, so I really want to get this fixed.I also believe the two problems are somehow related, considering they both involve working for a few seconds to a few minutes, then stalling and failing. Could this be somekind of authentication or something to do with WPA/WPA2 that I'm doing wrong?
View 1 Replies
View Related
Aug 20, 2012
There are three Windows 7 64 bit machines on our homegroup. Two work fine together and both of them can access the material on the problem 3rd machine as well as each other. However the third machine cannot access the material on either of the other two even though their icons and folders show under "Homegroup" on the problem 3rd machine. I have followed instructions Ultimate Troubleshooting Guide for Windows 7 HomeGroup Connection Issues and elsewhere on both the problem 3rd machine and one of the other two. No change. I have tried with the problem machine hard wired to the network and connected via wi-fi. Makes no difference. Clicking, in Homegroup on the 3rd machine on a shared folder on either of the other two machines gets the message "Windows cannot access", code as above, it also says "Network Path Not Found" and then offers a diagnosis routine which fails to identify the problem and then has you going round in circles.The problem machine is running Home Premium as is one of the OK machines, the other is running Ultimate. All three are running AVG Internet Security 2012 which I have also disabled on the problem and ok machines separately and simultaneoulsy - it made no difference.
View 9 Replies
View Related
Oct 5, 2009
Yesterday I installed the final version of Windows 7 Professional 64-bit (from MSDNAA) on my computer which was previously running Vista Home Premium 32-bit. On Vista, the network worked wonderfully, but once Windows 7 was fully installed, the computer can't even find any networks. I rebooted and ran Windows Vista in safe mode, and, sure enough, the internet was working and everything.
I took a look at the device manager in Vista, and it listed NVIDIA nForce 10/100 Mbps Ethernet and Linksys wireless G PCI adapter under my network adapters. (Oddly, when I run device manager in Windows 7, it only lists NVIDIA nForce Networking Controller under network adapters.)
I thought for sure it was just a driver error, so I merely went on the laptop, downloaded Driver Robot, put it on my computer running Windows 7, ran the export scan, put the result scan on a flash drive, and downloaded the driver for the network adapter that it told me to. Then I put the driver setup on the flash drive, and copy it onto my computer with Windows 7. First, it told me that the file was corrupted, but after many tries, it finally worked. I updated my network adapter drivers.
Unfortunately, I still can't find any networks.
EDIT: I just looked at my device manager in Windows 7 again. Under "Other devices," it lists "Network Controller" with a yellow exclamation point.
View 0 Replies
View Related
Apr 19, 2009
when I turned on my computer this morning the computer didn't start the antivirus program, and I can got to system repair, I cant start Computer management I get an error message
The Error message says.
"Network Error
Windows cannot access C:Windowssystem32compmgmt.msc
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
View 7 Replies
View Related
Nov 1, 2009
So after installing windows 7 the other day, everything seemed to be working properly. I was able to access all of my network shares to my file server, and other machines in the house.
Even yesterday this all worked as normal. But now today I am unable to communicate with any other pc in the house. either by pc-name or ip-address. I receive the error 0x80070043: The network name cannot be found.
From a command window, I am able to ping all machines I have tested to, by IP address, and by hostname.
Starting a virtual XP session within Windows 7, I am able to browse to the shares in the XP session.
In the network section, no PCs are visible excluding the local PC. Attempting to browse to the local PC via the network results in the error message "The specified network provider name is invalid".
All PCs are in the workgroup "WORKGROUP"
Browsing around the network via my laptop functions with no issues.
Browsing the the windows 7 PC from other pcs works without issue.
Any suggestions would be incredibly helpful.
View 3 Replies
View Related
Jan 1, 2010
I have a small home network connecting 2 PC's and a NAS drive. The network is hard wired using CAT 5 and there is also a wireless AP for the Wii console. When both PC's used XP either could access (read and write) to the NAS which is mainly used to store digital photos. Since upgrading one PC to Windows 7 I cannot access the NAS from this PC.
I can see the drive and can logon via web brwoser to conduct maintenance but cannot read or write using Windows Explorer. I always get the Netwrok Error 1208 statement. I suspect it is to do with new security protocols in Windows 7 not talking to older Samba software. Could someone offer some help please ?
View 3 Replies
View Related
May 23, 2011
how can i fix the network eror(tcp_eror)
View 1 Replies
View Related
Apr 21, 2011
Getting an error when trying to connect to a network drive 'An error occured while re-connecting.No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept'Now this has been setup with a local folder on the server shared and is being mapped to 19 people on the network.I looked under advanced permissions and can see max allowed connections set to 20, there are 19 people in the company but the problem lies that some bring in their laptops and attempt to connect to to the existing shares as well which is obviously causing problems as I can only allow max '20' connections to this mapped folder.Is there any fix that will allow Win 7 Pro x64 I can enter in the registry to allow more connections?
OS:Running Win 7 Pro x64
View 4 Replies
View Related
Dec 4, 2009
while trying to update network adapter drivers on my gf's pc i had an error.
now i cant get it online.
ive tried using asus latest driver but it fails.
ive also tried a few older drivers.
but says not compatable with win 7
if i do a win 7 repair. will it reinstall the network adapter.
or do i need to do a full format?
View 4 Replies
View Related
Oct 22, 2010
I am new to Windows 7, and am unable as yet to get my documents to print from any program. I have installed multiple printers (different manufacturers) in an attempt to find something compatible, but I believe my problem to be tied to the network.
I am running Windows 7 64 bit, with Office 2007. I have installed a Xerox Phaser 6360 DN printer via the network at work. The printer is connected, as I can open the properties and see that the yellow toner is low. Newest/compatible driver from Xerox website is installed; yet whenever I send a document (or test page) to the printer, in the status window after a few minutes the status changes from "Printing" to "Error - Printing".
View 5 Replies
View Related
Apr 21, 2011
Getting an error when trying to connect to a network drive 'An error occured while re-connecting.No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept'Now this has been setup with a local folder on the server shared and is being mapped to 20 people on the network.I looked under advanced permissions and can see max allowed connections set to 20, there are 19 people in the company but the problem lies that some bring in their laptops and attempt to connect to to the existing shares as well which is obviously causing problems as I can only allow max '20' connections to this mapped folder.
View 8 Replies
View Related
Oct 3, 2011
I was planning on doing some college work during the weekend, but when I went to switch my laptop on it wouldn't connect to my hub. I have Windows 7 and my network connection symbol in the bottom right corner had a yellow star over it saying there wasn't limited access and the connection was unsuccessful. After restarting my hub and laptop, then trying a neighbours hub it was still unsuccessful. I have used the troubleshoot settings and the response says I have either a problem with the driver for the Wireless Network Connection adapter, or the Local Area Connection adapter. I am unsure on what this means and how to fix it
View 2 Replies
View Related
Dec 26, 2011
a friend of mine is trying to access files residing on a vista pc residing on the same network as his 7 pc in order to copy them over. cunningly, both pcs have exactly the same network name albeit one in capitals and one in lowercase although i am pretty sure this does not mkae a difference. can anyone tell if this is where the problem lies, especially since another vista pc on the network shows up fine
View 1 Replies
View Related
May 25, 2012
just built my computer and when I tried to connect it to the internet through an ethernet cable it created a broadband network connection. Then when I try to connect it tells me the modem had encountered a problem it's error 651 and I can't connect to
View 1 Replies
View Related
Jul 1, 2012
i am using windows 7 on dell latitude d620, when i share Internet via mobile htc wildfire android 2.3 version , so sometime it is network connected .but most of time showing error unidentified network & net is not work.
View 1 Replies
View Related
Sep 27, 2012
I have a small problem at work with my new printer. I have 11 computers in a classroom, the printer is connected to the teacher's computer (mine, named DELL00). However, I am unable to add the printer on any other computer in classroom, usually with error 0x00000002
All computers have admin account named Teacher, and all except the Teacher's computer have one standard account named Student. Adding the printer on admin account went without single problem on every computer, but the pinter does not show on the Student account. When I try to add the printer from Student account, I get error 0x00000002
I am adding the printer through Devices & Printers -> Add Printer -> Network Printer -> Not in list -> \DELL00LaserJet-P1102. This method worked on the admin account without problem,s but not on the student account.
View 3 Replies
View Related
Nov 4, 2009
I have a home network with 4 computers; 3 wireless, 1 Ethernet. When they were all XP, things were working fine. Now 2 of the wireless systems have been upgraded to Windows 7 with the "family Pack" retail upgrade.
I believe I have made all the proper permissions and security policies, but this is not working. The Windows 7 system can access the XP system folders. but the XP systems can see the Windows 7 system but get an access violation error.
I've tried some of the suggestions in other thread, no joy. I turned off the McAfee firewall, but that doesn't help.
XP doesn't know anything about "Homegroups" I have a work group name and its set on all systems,
What am I missing?
View 4 Replies
View Related
Dec 30, 2009
When I select network I can see the other computers on the nework but when I click on any of them but my own I get an error " Check the spelling of the name. Otherwise, there might be problem with your network Error code 0x80070035 the network path not found" The computer is seeing them but says the path name is wrong. The others are vista machines and they all can see and access this machine. Any help would be great also I have no problem accessing the internet only the local computers I can't access.
View 9 Replies
View Related
Oct 13, 2011
I'm running Windows 7 64bit and have tried several times to install iTunes 10.5, both over iTunes 10.4 and separately. Everytime I get the error message - "a network error occurred while attempting to read from the file:C:|windowsinstallerapplesoftwareupdate.msi".
View 4 Replies
View Related
